968 resultados para STANDARDIZATION
Resumo:
In animal experiments, animals, husbandry and test procedures are traditionally standardized to maximize test sensitivity and minimize animal use, assuming that this will also guarantee reproducibility. However, by reducing within-experiment variation, standardization may limit inference to the specific experimental conditions. Indeed, we have recently shown in mice that standardization may generate spurious results in behavioral tests, accounting for poor reproducibility, and that this can be avoided by population heterogenization through systematic variation of experimental conditions. Here, we examined whether a simple form of heterogenization effectively improves reproducibility of test results in a multi-laboratory situation. Each of six laboratories independently ordered 64 female mice of two inbred strains (C57BL/6NCrl, DBA/2NCrl) and examined them for strain differences in five commonly used behavioral tests under two different experimental designs. In the standardized design, experimental conditions were standardized as much as possible in each laboratory, while they were systematically varied with respect to the animals' test age and cage enrichment in the heterogenized design. Although heterogenization tended to improve reproducibility by increasing within-experiment variation relative to between-experiment variation, the effect was too weak to account for the large variation between laboratories. However, our findings confirm the potential of systematic heterogenization for improving reproducibility of animal experiments and highlight the need for effective and practicable heterogenization strategies.
Resumo:
Diffusion-weighted (DW) magnetic resonance (MR) imaging has a large number of potential clinical applications in the female and male pelvis and can easily be added to any routine MR protocol. In the female pelvis, DW imaging allows improvement of staging in endometrial and cervical cancer, especially in locally advanced disease and in patients in whom contrast medium administration should be avoided. It can also be helpful in characterizing complex adnexal masses and in depicting recurrent tumor after treatment of various gynecologic malignancies. DW imaging shows promising results in monitoring treatment response in patients undergoing radiation therapy of cervical cancer. An increase in apparent diffusion coefficient (ADC) values of responders precedes changes in size and may therefore allow early assessment of treatment success. In the male pelvis, the detection of prostate cancer in the peripheral zone is relatively easier than in the central gland based on the underlying ADC values, whereas overlapping values reported in the central gland still need further research. DW imaging might also be applied in the noninvasive evaluation of bladder cancer to differentiate between superficial and muscle-invasive tumors. Initial promising results have been reported in differentiating benign from malignant pelvic lymph nodes based on the ADC values; however, larger-scale studies will be needed to allow the detection of lymph node metastases in an individual patient. Prerequisites for successfully performing DW imaging of the female and male pelvis are standardization of the DW imaging technique, including the choice of b values, administration of an antiperistaltic drug, and comparison of DW findings with those of morphologic MR imaging.
Resumo:
Extracranial applications of diffusion-weighted (DW) magnetic resonance (MR) imaging are gaining increasing importance, including in head and neck radiology. The main indications for performing DW imaging in this relatively small but challenging region of the body are tissue characterization, nodal staging, therapy monitoring, and early detection of treatment failure by differentiating recurrence from posttherapeutic changes. Lower apparent diffusion coefficients (ADCs) have been reported in the head and neck region of adults and children for most malignant lesions, as compared with ADCs of benign lesions. For nodal staging, DW imaging has shown promise in helping detect lymph node metastases, even in small (subcentimeter) nodes with lower ADCs, as compared with normal or reactive nodes. Follow-up of early response to treatment is reflected in an ADC increase in the primary tumor and nodal metastases; whereas nonresponding lesions tend to reveal only a slight increase or even a decrease in ADC during follow-up. Optimization and standardization of DW imaging technical parameters, comparison of DW images with morphologic images, and increasing experience, however, are prerequisites for successful application of this challenging technique in the evaluation of various head and neck pathologic conditions.
Resumo:
The umbilical cord is not an inert structure, suspended between the fetus and placenta, but it plays an active role and it is involved in several processes afflicting the feto-placental unit. Its study has to be regarding not only its morphology and morphometry, and the impendance of blood flow by Doppler waveform analysis, but it includes also an analysis of the coiling type and the amount of the Wharton Jelly. The umbilical cord has been considered like an important and huge source of informations, useful to assess the well-being of the fetus and the outcome of pregnancy. The standardization of ultrasound techniques is the first step to speak the same language and make the study of this structure a fundamental part of well-being fetus assessment. This article is carefully focused on morphologic, morphometric and functional ultrasound examination of umbilical cord and suggests that any anomaly detected should provide an indication for an intense fetal follow-up, useful for early helpful therapy, preventing serious complication for the pregnancy.
Resumo:
PURPOSE: Maxillofacial and skull fractures occur with concomitant injuries in pediatric trauma patients. The aim of this study was to determine the causes and distributions of maxillofacial and skull fractures as well as concomitant injuries of pediatric patients in Switzerland. Results were compared with worldwide studies. MATERIALS AND METHODS: A retrospective review was conducted of 291 pediatric patients with maxillofacial and skull fractures presenting to a level-I trauma center over a 3-year span. Data concerning the mechanism of the accident and the topographic location of the injuries were analyzed. RESULTS: The most common causes were falls (64%), followed by traffic (22%) and sports-related accidents (9%). Fifty-four percent of the fractures occurred in the skull vault and 37% in the upper and middle facial third. One third of the patients (n = 95) suffered concomitant injuries, mostly cerebral concussions (n = 94). CONCLUSIONS: The spectrum of craniofacial injuries is related to the specific developmental stage of the craniofacial skeleton. It is probable that national prevention programs will have a positive effect on reducing the incidence of falls. Standardization of studies is needed for international comparison.
Resumo:
INTRODUCTION: In periapical surgery, the absence of standardization between different studies makes it difficult to compare the outcomes. OBJECTIVE: To compare the healing classification of different authors and evaluate the prognostic criteria of periapical surgery at 12 months. MATERIAL AND METHODS: 278 patients (101 men and 177 women) with a mean age of 38.1 years (range 11 to 77) treated with periapical surgery using the ultrasound technique and a 2.6x magnifying glass, and silver amalgam as root-end filling material were included in the study. Evolution was analyzed using the clinical criteria of Mikkonen et al., 1983; radiographic criteria of Rud et al., 1972; the overall combined clinical and radiographic criteria of von Arx and Kurt, 1999; and the Friedman (2005) concept of functional tooth at 12 months of surgery. RESULTS: After 12 months, 87.2% clinical success was obtained according to the Mikkonen et al., 1983 criteria; 73.9% complete radiographic healing using Rud et al. criteria; 62.1% overall success, following the clinical and radiographic parameters of von Arx and Kurt, and 91.9% of teeth were functional. The von Arx and Kurt criteria was found to be the most reliable. CONCLUSION: Overall evolution according to von Arx and Kurt agreed most closely with the other scales.
Resumo:
Corporate Social Responsibility (CSR) addresses the responsibility of companies for their impacts on society. The concept of strategic CSR is becoming increasingly mainstreamed in the forest industry, but there is, however, little consensus on the definition and implementation of CSR. The objective of this research is to build knowledge on the characteristics of CSR and to provide insights on the emerging trend to increase the credibility and legitimacy of CSR through standardization. The study explores how the sustainability managers of European and North American forest companies perceive CSR and the recently released ISO 26000 guidance standard on social responsibility. The conclusions were drawn from an analysis of two data sets; multivariate survey data based on one subset of 30 European and 13 North American responses, and data obtained through in-depth interviewing of 10 sustainability managers that volunteered for an hour long phone discussion about social responsibility practices at their company. The analysis concluded that there are no major differences in the characteristics of cross-Atlantic CSR. Hence, the results were consistent with previous research that suggests that CSR is a case- and company-specific concept. Regarding the components of CSR, environmental issues and organizational governance were key priorities in both regions. Consumer issues, human rights, and financial issues were among the least addressed categories. The study reveals that there are varying perceptions on the ISO 26000 guidance standard, both positive and negative. Moreover, sustainability managers of European and North American forest companies are still uncertain regarding the applicability of the ISO 26000 guidance standard to the forest industry. This study is among the first to provide a preliminary review of the practical implications of the ISO 26000 standard in the forest sector. The results may be utilized by sustainability managers interested in the best practices on CSR, and also by a variety of forest industrial stakeholders interested in the practical outcomes of the long-lasting CSR debate.
Resumo:
OBJECTIVE: We compared motor and movement thresholds to transcranial magnetic stimulation (TMS) in healthy subjects and investigated the effect of different coil positions on thresholds and MEP (motor-evoked potential) amplitudes. METHODS: The abductor pollicis brevis (APB) 'hot spot' and a standard scalp position were stimulated. APB resting motor threshold (APB MEP-MT) defined by the '5/10' electrophysiological method was compared with movement threshold (MOV-MT), defined by visualization of movements. Additionally, APB MEP-MTs were evaluated with the '3/6 method,' and MEPs were recorded at a stimulation intensity of 120% APB MEP-MT at each position. RESULTS: APB MEP-MTs were significantly lower by stimulation of the 'hot spot' than of the standard position, and significantly lower than MOV-MTs (n=15). There were no significant differences between the '3/6' and the '5/10' methods, or between APB MEP amplitudes by stimulating each position at 120% APB MEP-MT. CONCLUSIONS: Coil position and electrophysiological monitoring influenced motor threshold determinations. Performing 6 instead of 10 trials did not produce different threshold measurements. Adjustment of intensity according to APB MEP-MT at the stimulated position did not influence APB MEP amplitudes. SIGNIFICANCE: Standardization of stimulation positions, nomenclature and criteria for threshold measurements should be considered in design and comparison of TMS protocols.
Resumo:
BACKGROUND: Continual surveillance based on patch test results has proved useful for the identification of contact allergy. OBJECTIVES: To provide a current view on the spectrum of contact allergy to important sensitizers across Europe. PATIENTS/METHODS: Clinical and patch test data of 19 793 patients patch tested in 2005/2006 in the 31 participating departments from 10 European countries (the European Surveillance System on Contact Allergies' (ESSCA) www.essca-dc.org) were descriptively analysed, aggregated to four European regions. RESULTS: Nickel sulfate remains the most common allergen with standardized prevalences ranging from 19.7% (central Europe) to 24.4% (southern Europe). While a number of allergens shows limited variation across the four regions, such as Myroxylon pereirae (5.3-6.8%), cobalt chloride (6.2-8.8%) or thiuram mix (1.7-2.4%), the differences observed with other allergens may hint on underlying differences in exposures, for example: dichromate 2.4% in the UK (west) versus 4.5-5.9% in the remaining EU regions, methylchloroisothiazolinone/methylisothiazolinone 4.1% in the South versus 2.1-2.7% in the remaining regions. CONCLUSIONS: Notwithstanding residual methodological variation (affecting at least some 'difficult' allergens) tackled by ongoing efforts for standardization, a comparative analysis as presented provides (i) a broad overview on contact allergy frequencies and (ii) interesting starting points for further, in-depth investigation.
Resumo:
The methodology of randomized clinical trials is essential for the critical assessment and registration of therapeutic interventions. The CONSORT (Consolidated Standards of Reporting Trials) statement was developed to alleviate the problems arising from the inadequate reporting of randomized controlled trials. The present article reflects on the items that we believe should be included in the CONSORT checklist in the context of conducting and reporting trials in allergen-specific immunotherapy. Only randomized, blinded (in particular blinding of patients, health care providers, and outcome assessors), placebo-controlled Phase III studies in this article. Our analysis focuses on the definition of patients' inclusion and exclusion criteria, allergen standardization, primary, secondary and exploratory outcomes, reporting of adverse events and analysis.
Resumo:
Absolute quantitation of clinical (1)H-MR spectra is virtually always incomplete for single subjects because the separate determination of spectrum, baseline, and transverse and longitudinal relaxation times in single subjects is prohibitively long. Integrated Processing and Acquisition of Data (IPAD) based on a combined 2-dimensional experimental and fitting strategy is suggested to substantially improve the information content from a given measurement time. A series of localized saturation-recovery spectra was recorded and combined with 2-dimensional prior-knowledge fitting to simultaneously determine metabolite T(1) (from analysis of the saturation-recovery time course), metabolite T(2) (from lineshape analysis based on metabolite and water peak shapes), macromolecular baseline (based on T(1) differences and analysis of the saturation-recovery time course), and metabolite concentrations (using prior knowledge fitting and conventional procedures of absolute standardization). The procedure was tested on metabolite solutions and applied in 25 subjects (15-78 years old). Metabolite content was comparable to previously found values. Interindividual variation was larger than intraindividual variation in repeated spectra for metabolite content as well as for some relaxation times. Relaxation times were different for various metabolite groups. Parts of the interindividual variation could be explained by significant age dependence of relaxation times.
Resumo:
This article describes the structure and utilization of a computerized databank system for WHO mortality data. This system makes available "at finger-tips" data which previously were published by WHO in its blue volumes. The data can be handled much more flexible. At the moment the system provides information on age-standardized rates (direct standardization), total number of cases, as well as cover per age-group and year for about a hundred countries. The time period covered is 1950-1985, with exceptions for data which are not available to WHO.
Resumo:
The "International Federation of Clinical Chemistry" (IFCC) has developed a new international reference measurement system as anchor for worldwide standardization of HbA1c determinations. The use of IFCC-referenced methods results in "true" HbA1c-values that are 1 - 2% lower compared to traditional methods. This leads to potential risks of clinical misjudgement. For the evaluation of glycaemic control it is, therefore, important to know the method used, its normal range as well as possibilities of mathematical conversion of results. To reduce the risk of wrong interpretation of results the Swiss Society of Endocrinology and Diabetes recommends that reports of HbA1c clearly indicate whether the values are "IFCC-" or "DCCT-traceable". "IFCC"-results should best be reported in mmol/mol. In addition, the normal range has to be indicated properly.
Resumo:
Although the effects of quality management on social work are still widely unexplored, critics suspect that it will lead to a negative standardization of working conditions, whereas supporters of quality management hope for a greater transparency and effectiveness of service delivery. This article reports on a survey of 30 managers, 261 professionals, and 435 families in 30 family intervention service organizations. It uses cluster analysis to explore the relationship between quality management and different forms of work formalization. Results showed that working conditions generally are enabling for professional practice, but differences exist between what is called here a managerialist machine bureaucracy, an atomistic professional organization, and a collegiate professional organization.
Resumo:
Ein dynamisches Umfeld erforderte die permanente Anpassung (intra-)logistischer Prozesse zur Aufrechterhaltung der Leistungs- und Wettbewerbsfähigkeit von Unternehmen. In der Standardisierung von Prozessen und in unternehmensübergreifenden Prozessmodellen wurden Schlüsselfaktoren für ein effizientes Geschäftsprozessmanagement gesehen, insbesondere in Netzwerken. In der Praxis fehlten wissenschaftlich fundierte und detaillierte Referenzprozessmodelle für die (Intra-)Logistik. Mit der Erforschung und Entwicklung eines Referenzprozessmodells und der prototypischen Realisierung einer Prozess-Workbench zur generischen Erstellung wandelbarer Prozessketten wurde ein Beitrag zur Prozessstandardisierung in der Logistik geleistet. Im Folgenden wird der beschrittene Lösungsweg dargestellt, der erstens aus der Entwicklung eines Metamodells für die Referenzmodellierung, zweitens aus dem empirischen Nachweis der Generierung eines Referenzprozessmodells aus „atomaren“ Elementen und drittens aus der Modellevaluation bestand.