Development of advanced catalytic systems for the selective hydrogenolysis of biomass-derived polyols

195 p.

Produção de fibras de alumina biomórfica a partir do sisal

Sisal is a renewable agricultural resource adapted to the hostile climatic and soil conditions particularly encountered in the semi-arid areas of the state of Rio Grande do Norte. Consequently, sisal has played a strategic role in the economy of the region, as one of few options of income available in the semi-arid. Find new options and adding value to products manufactured from sisal are goals that contribute not only to the scientific and technological development of the Northeastern region, but also to the increase of the family income for people that live in the semi-arid areas where sisal is grown. Lignocellulosic fibers are extracted from sisal and commonly used to produce both handcrafted and industrial goods including ropes, mats and carpets. Alternatively, addedvalue products can be made using sisal to produce alumina fibers (Al2O3) by biotemplating, which consists in the reproduction of the natural fiber-like structure of the starting material. The objective of this study was to evaluate the conditions necessary to convert sisal into alumina fibers by biotemplating. Alumina fibers were obtaining after pretreating sisal fibers and infiltrating them with a Al2Cl6 saturated solution, alumina sol from aluminum isopropoxide or aluminum gas. Heat-treating temperatures varied from 1200 ºC to 1650 °C. The resulting fibers were then characterized by X-ray diffraction and scanning electronic microscopy. Fibers obtained by liquid infiltration revealed conversion only of the surface of the fiber into α-Al2O3, which yielded limited resistance to handling. Gas infiltration resulted in stronger fibers with better reproduction of the inner structure of the original fiber. All converted fibers consisted of 100% α-Al2O3 suggesting a wide range of technological applications especially those that require thermal isolation

Improved Dynamic Headspace Sampling and Detection using Capillary Microextraction of Volatiles Coupled to Gas Chromatography Mass Spectrometry

Sampling and preconcentration techniques play a critical role in headspace analysis in analytical chemistry. My dissertation presents a novel sampling design, capillary microextraction of volatiles (CMV), that improves the preconcentration of volatiles and semivolatiles in a headspace with high throughput, near quantitative analysis, high recovery and unambiguous identification of compounds when coupled to mass spectrometry. The CMV devices use sol-gel polydimethylsiloxane (PDMS) coated microglass fibers as the sampling/preconcentration sorbent when these fibers are stacked into open-ended capillary tubes. The design allows for dynamic headspace sampling by connecting the device to a hand-held vacuum pump. The inexpensive device can be fitted into a thermal desorption probe for thermal desorption of the extracted volatile compounds into a gas chromatography-mass spectrometer (GC-MS). The performance of the CMV devices was compared with two other existing preconcentration techniques, solid phase microextraction (SPME) and planar solid phase microextraction (PSPME). Compared to SPME fibers, the CMV devices have an improved surface area and phase volume of 5000 times and 80 times, respectively. One (1) minute dynamic CMV air sampling resulted in similar performance as a 30 min static extraction using a SPME fiber. The PSPME devices have been fashioned to easily interface with ion mobility spectrometers (IMS) for explosives or drugs detection. The CMV devices are shown to offer dynamic sampling and can now be coupled to COTS GC-MS instruments. Several compound classes representing explosives have been analyzed with minimum breakthrough even after a 60 min. sampling time. The extracted volatile compounds were retained in the CMV devices when preserved in aluminum foils after sampling. Finally, the CMV sampling device were used for several different headspace profiling applications which involved sampling a shipping facility, six illicit drugs, seven military explosives and eighteen different bacteria strains. Successful detection of the target analytes at ng levels of the target signature volatile compounds in these applications suggests that the CMV devices can provide high throughput qualitative and quantitative analysis with high recovery and unambiguous identification of analytes.

Avenues de synthèse d’un matériau magnétique multifonctionnel à des fins de catalyse hétérogène

La catalyse est à la base de la fabrication de médicaments, de produits textiles, d‘engrais, des pots d’échappement, et une multitude d’autres applications de notre quotidien. En effet, dans les pays industrialisés jusqu’à 80% des produits manufacturés utilisés au quotidien ont nécessité au moins une étape de catalyse lors de leur fabrication. Outre être actif, il est primordial pour un catalyseur performant d’être résistant à la désactivation qui se traduit par la perte d’activité ou de sélectivité d’un catalyseur au cours du temps. La synthèse d’un matériau multifonctionnel permet de répondre à ces différents critères. L’objectif d’un design intelligent de matériaux est de mener à des effets synergiques de chacune des composantes. Pour un catalyseur, en plus d’être actif et sélectif pour le produit désiré, il faut en plus qu’il soit durable, stable dans le temps, et permette d’être réutilisable. L’objectif de ce projet est de faire une synthèse originale, simple et reproductible d’un catalyseur actif et résistant à la désactivation. De base, un catalyseur se compose d’un support et d’un matériau actif. La nature, la morphologie et l’agencement de ces derniers dictent le comportement chimique du catalyseur final. Comme matériau actif, les nanoparticules d’or sont très prisées en raison de leur potentiel de catalyse élevée pour de nombreuses réactions. Cependant, aux températures de fonctionnement de la catalyse, les nanoparticules d’or ont tendance à se désactiver par coalescence. Pour remédier à cela, il est possible de déposer une couche de silice mésoporeuse afin de protéger les NPs d’or des rudes conditions de réaction tout en étant perméables aux espèces réactives. Plusieurs types de matériaux peuvent servir de support aux nanoparticules d’or. À ce titre, les particules d’oxydes de fer magnétiques telles que la magnétite (Fe[indice inférieur 3]O[indice inférieur 4]) sont intéressantes pour leur potentiel hyperthermique, phénomène par lequel des nanoparticules (NPs) magnétiques transforment de l’énergie électromagnétique provenant d’un champ externe haute fréquence en chaleur, créant ainsi des nano-fours. Une première couche de silice est utilisée comme matrice de greffage afin de fixer les nanoparticules d’or sur la magnétite. La structure visée est illustrée à la Figure ci-dessous. Figure 1 Structure du catalyseur de Fe2O4@SiO2-Au-SiO2m (Ge, Zhang, Zhang, & Yin, 2008) Plusieurs avenues d’assemblage et de synthèse sont explorées pour chacune des composantes de la structure visée. Les avantages et inconvénients ainsi que des mécanismes sont proposés pour chaque voie de synthèse. Le matériau est utilisé comme catalyseur pour la réaction de réduction du 4-Nitrophénol par du NaBH4. Pour ce qui est de la synthèse de magnétite par voie solvothermique, il a été démontré qu’il était important d’être dans un milieu sous pression puisque l’étape limitante de la réaction est la solubilité des particules de magnétites dans le milieu. Cela est en accord avec le principe de mûrissement d’Ostwald selon lequel les petites particules ont tendance à se dissoudre dans le milieu et précipiter à la surface des plus grosses particules de façon à diminuer l’énergie interfaciale. Cette synthèse a été reproduite avec succès et a mené à la production de nanoparticules de Fe[indice inférieur 3]O[indice inférieur 4] sphériques creuses d’une taille de 150 [plus ou moins] 30nm. Ces sphères creuses ont été recouvertes d’une couche de silice dense par une méthode de Stöber modifiée. Le recouvrement forme des amas de particules et est non uniforme en raison de la présence de poly(éthlyène glycol) à la sur face de la magnétite, un adjuvant présent lors de sa synthèse afin d’améliorer la dispersion de la magnétite. La synthèse et le greffage d’AuNPs sont bien maîtrisés : les AuNPs ont une taille de 17 [plus ou moins] 6nm et la quantité d’or greffé est assez élevée. Ultimement, une méthode de greffage alternative tel que le greffage par croissance in situ de nanoparticules d’or pourrait être emprunté afin d’obtenir des particules plus petites. Pour ce qui est de la formation d’une couche de silice mésoporeuse, la méthode par calcination est une meilleure option que par gravure chimique en raison de sa sélectivité envers la couche externe de silice plus élevée ainsi que la formation apparente de pores.

Correlation between structure and electrochemistry of LiMO2 cathode materials (M = Ni, Co)

Technical diversity and various knowledge is required for the understanding of undoubtedly complex system such as a Lithium-ion battery. The peculiarity is to combine different techniques that allow a complete investigation while the battery is working. Nowadays, research on Li-ion batteries (LIBs) is experiencing an exponential growth in the development of new cathode materials. Accordingly, Li-rich and Ni-rich NMCs, which have similar layered structure of LiMO2 oxides, have been recently proposed. Despite the promising performance on them, still a lot of issues have to be resolved and the materials need a more in depth characterisation for further commercial applications. In this study LiMO2 material, in particular M = Co and Ni, will be presented. We have focused on the synthesis of pure LiCoO2 and LiNiO2 at first, followed by the mixed LiNi0.5Co0.5O2. Different ways of synthesis were investigated for LCO but the sol-gel-water method showed the best performances. An accurate and systematic structural characterization followed by the appropriate electrochemical tests were done. Moreover, the in situ techniques (in-situ XRD and in situ OEMS) allowed a deep investigation in the structural change and gas evolution upon the electrochemically driven processes.

Materiali ceramici a struttura Aurivillius per la produzione di solar fuels

Solar fuels from CO2 is a topic of current large scientific and industrial interest. In particular, photo-electrochemical cells (PECs) represent today one of the most promising technology for storing sun energy as chemical bonds exploiting carbon dioxide as starting reagent. In this thesis, the possibility of using Aurivillius-type compounds for the production of solar fuels was deeply investigated. Aurivillius-type perovskites, with general formula Bi(n+1)Fe(n-3)Ti3O(3n+3), were synthesized and fully characterized to study the influence of the number of perovskite layers as well as of the synthesis parameters onto their final properties. In particular, 8 different systems were considered increasing the amount of iron and, as a consequence, the number of perovskite layers. These compounds were synthesized through a standard solid-state reaction method as well as via a sol-gel technique and characterized by XRD, SEM and BET analyses. The band gap value and the photocatalytic activity towards Rhodamine B decomposition were assessed as well. For each system, a screen-printing ink was formulated to be deposited as photo-electrodes onto transparent conducting supports. The photo-electrodes were morphologically characterized by XRD and SEM analysis, and their electrochemical properties (cyclic and linear voltammetry, EIS, Mott-Schottky analysis) were determined. Finally, the most promising materials were tested as photo-cathode inside PEC cell under different illumination conditions, to quantify their ability to convert CO2. The obtained results show the potentiality of Aurivillius-type compounds as innovative material for carbon dioxide photo-electrochemical reduction.

Sviluppo ed ingegnerizzazione di nuovi sistemi ibridi a base di nanoparticelle inorganiche e bio-tensioattivi

In questo lavoro di tesi è stata investigata la sintesi di compositi a base di nano particelle di biossido di titanio rivestite da un bio-tensioattivo naturale. Il noto fotocatalizzatore (Nano-TiO2) è stato accoppiato ad un bio-tensioattivo dalle riconosciute proprietà antibatteriche, antivirali e anti-tumorali per ottenere un materiale composito multifunzionale. Diverse opzioni di design sono state investigate e la sintesi ottimizzata attraverso una caratterizzazione sistematica dei materiali prodotti, sia sulle sospensioni (DLS, ELS, TEM) sia sui prodotti granulati e calcinati (XRD, FT-IR, SEM, UV-Vis., BET). Per comprendere il ruolo del bio-tensioattivo e i potenziali effetti sinergici che il materiale composito potesse generare, si sono effettuate diverse caratterizzazioni funzionali testando il materiale per la realizzazione di nano-fasi fotocatalitiche da impiegare in processi di adsorbimento/degradazione di inquinanti acquosi, per la realizzazione di rivestimenti tessili antibatterici e come composito utile per l’assorbimento di metalli pesanti.

Niobium-based heterogeneous catalysts synthesised in supercritical carbon dioxide for selective olefin epoxidation

In this work, two different protocols for the synthesis of Nb2O5-SiO2 with a sol-gel route in which supercritical carbon dioxide was used as solvent have been developed. The tailored design of the reactor allowed the reactants to come into contact only when supercritical CO2 is present, and the high-throughput experimentation scCO2 unit allowed the screening of synthetic parameters, that led to a Nb2O5 incorporation into the silica matrix of 2.5 wt%. N2-physisorption revealed high surface areas and the presence of meso- and micropores. XRD allowed to demonstrate the amorphous character of these materials. SEM-EDX proved the excellent dispersion of Nb2O5 into the silica matrix. These materials were tested in the epoxidation of cyclooctene with hydrogen peroxide, which is considered an environmentally friendly oxidant. The catalysts were virtually inactive in an organic, polar, aprotic solvent (1,4-dioxane). However, the most active scCO2 Nb2O5-SiO2 catalyst achieved a cyclooctene conversion of 44% with a selectivity of 88% towards the epoxide when tested in ethanol. Catalytic tests on cyclohexene revealed the presence of the epoxide, which is remarkable, considering that this substrate is easily oxidised to the diol. The behaviour in protic and aprotic solvents is compared to that of TS-1.

From sol to aerogel: a study of the nanostructural characteristics of TEOS derived sonogels

The nanostructural characteristics of acid-catalyzed sonogels are studied along the aging process at 60 degreesC in saturated conditions and after the CO, supercritical extraction (aerogel). The structural evolution was studied by means of small-angle X-ray scattering (SAXS) and UV-Visible absorption techniques. The sonogel exhibits a mass fractal structure in a length scale between zeta - 1/q(0) similar to 5.3 and a(1) similar to 1/q(m) similar to 0.22 nm, as the length scale probed by SAXS. The apparent mass fractal dimension lightly increases from 2.0 for fresh gel until 2.2 for 14 days aging in wet conditions. The UV absorption also increases with the aging time in wet conditions. Both observations are consistent with the syneresis process accompanying the polycondensation progress during aging in saturated conditions. For long aging times, the wet sonogels show a light transition from a mass to a surface fractal. in a very small interval of the length scale, developing an extremely rough surface with fractal dimension D-S similar to 2.9, the fractal characteristics of the sonogels practically do not change with the alcohol exchange. With the CO2 supercritical extraction (aerogel). The interval in the length scale in which the surface fractal is defined increases, while the surface fractal dimension diminishes to D-S similar to 2.5. The mass fractal characteristics are less apparent in the aerogels. (C) 2001 Elsevier B.V. B.V. All rights reserved.

Structural characterization of a tin oxyhydroxide gel and its precursor sol

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Evaluation of the Contraction of Cutaneous Wounds in Wistar Rats Treated with Brazilian Green Propolis Gel

In this work the effects of topic use of Brazilian green propolis gel in the contraction of wounds performed in rat`s skin was evaluated. In ten female Wistar rats were done four wounds in dorsal region. Two wounds in each rat were treated daily with Brazilian green propolis gel during 10 days. The wounds were photographed daily, and the images were analyzed with ImageJ software, in order to measure wound areas and evaluate wound contraction. In the graphic analysis, treated group and control group had similar behavior, and both evolved for complete closure in 10th experimentation day. The wound clots fell down before in treated wounds. Green propolis in the gel formulation at 5% in topical use had not effect in the process of wound contraction. The macroscopic visualization of the contraction of wounds, by itself, does not seem to be a good indicator of the process of tissue repair.

Effects of phonophoresis with Arnica montana onto acute inflammatory process in rat skeletal muscles: An experimental study

This study aimed at verifying the effects of phonophoresis associated with Arnica montana on the acute phase of an inflammatory muscle lesion. Forty Wistar male rats (300 +/- 50 g), of which the Tibialis Anterior muscle was surgically lesioned, were divided into four groups (n = 10 each): control group received no treatment; the ultrasound group (US) was treated in pulsed mode with 1-MHz frequency, 0.5 W/cm(2) intensity (spatial and temporal average - SATA), duty cycle of 1: 2 (2 ms on, 4 ms off, 50%), time of application 3 min per session, one session per day, for 3 days; the phonophoresis or ultrasound plus arnica (US+A) group was treated with arnica with the same US parameters plus arnica gel; and the arnica group (A) was submitted to massage with arnica gel, also for 3 min, once a day, for 3 days. Treatment started 24 h after the surgical lesion. On the 4th day after lesion creation, animals were sacrificed and sections of the lesioned, inflamed muscle were removed for quantitative (mononuclear and polymorphonuclear cell count) and qualitative histological analysis. Collected data from the 4 groups were statistically analyzed and the significance level set at p < 0.05. Results show higher mononuclear cell density in all three treated groups with no significant difference between them, but values were significantly different (p < 0.0001) when compared to control group`s. As to polymorphonuclear cell density, significant differences were found between control group (p = 0.0134) and US, US+A and A groups; the arnica group presented lesser density of polymorphonuclear cells when compared (p = 0.0134) to the other groups. No significant difference was found between US and US+A groups. While the massage with arnica gel proved to be an effective anti-inflammatory on acute muscle lesion in topic use, these results point to ineffectiveness of Arnica montana phonophoresis, US having seemingly checked or minimized its anti-inflammatory effect. (C) 2008 Elsevier B. V. All rights reserved.

Agar extraction from integrated multitrophic aquacultured Gracilaria vermiculophylla: Evaluation of a microwave-assisted process using response surface methodology

Microwave-assisted extraction (MAE) of agar from Gracilaria vermiculophylla, produced in an integrated multitrophic aquaculture (IMTA) system, from Ria de Aveiro (northwestern Portugal), was tested and optimized using response surface methodology. The influence of the MAE operational parameters (extraction time, temperature, solvent volume and stirring speed) on the physical and chemical properties of agar (yield, gel strength, gelling and melting temperatures, as well as, sulphate and 3,6-anhydro-Lgalactose contents) was evaluated in a 2^4 orthogonal composite design. The quality of the extracted agar compared favorably with the attained using traditional extraction (2 h at 85ºC) while reducing drastically extraction time, solvent consumption and waste disposal requirements. Agar MAE optimum results were: an yield of 14.4 ± 0.4%, a gel strength of 1331 ± 51 g/cm2, 40.7 ± 0.2 _C gelling temperature, 93.1 ± 0.5ºC melting temperature, 1.73 ± 0.13% sulfate content and 39.4 ± 0.3% 3,6-anhydro-L-galactose content. Furthermore, this study suggests the feasibility of the exploitation of G. vermiculophylla grew in IMTA systems for agar production.

Contributos de um jogo tipo peddy paper na motivação de alunos para aprendizagens do tema sol-terra-vida

Este estudo tem como objetivo principal conhecer, analisar e refletir sobre as conceções e as práticas de sala de aula, relativamente à importância dos jogos como ferramenta motivadora para a aprendizagem de novos conteúdos. Numa primeira parte deste documento, é feita uma abordagem teórica sobre as questões que levaram à realização deste projeto. Numa segunda parte apresenta-se o estudo empírico que inclui a recolha do testemunho de alunos que realizaram as atividades propostas, bem como as suas expetativas acerca do uso do jogo na sala de aula. Foi utilizado o processo metodológico de investigação – ação. A recolha de dados baseouse em: observação direta, narrativa descritiva de toda a aula baseada nas Narrações Multimodais; questionário de resposta aberta e registos fotográficos, sobre os quais faremos uma análise qualitativa. Nas partes seguintes deste documento apresenta-se a análise de dades, que foi de natureza qualitativa, as conclusões e as limitações.

Compressed collagen gel: a novel scaffold for human bladder cells.

Collagen is highly conserved across species and has been used extensively for tissue regeneration; however, its mechanical properties are limited. A recent advance using plastic compression of collagen gels to achieve much higher concentrations significantly increases its mechanical properties at the neo-tissue level. This controlled, cell-independent process allows the engineering of biomimetic scaffolds. We have evaluated plastic compressed collagen scaffolds seeded with human bladder smooth muscle cells inside and urothelial cells on the gel surface for potential urological applications. Bladder smooth muscle and urothelial cells were visualized using scanning electron microscopy, conventional histology and immunohistochemistry; cell viability and proliferation were also quantified for 14 days in vitro. Both cell types tested proliferated on the construct surface, forming dense cell layers after 2 weeks. However, smooth muscle cells seeded within the construct, assessed with the Alamar blue assay, showed lower proliferation. Cellular distribution within the construct was also evaluated, using confocal microscopy. After 14 days of in vitro culture, 30% of the smooth muscle cells were found on the construct surface compared to 0% at day 1. Our results provide some evidence that cell-seeded plastic compressed collagen has significant potential for bladder tissue regeneration, as these materials allow efficient cell seeding inside the construct as well as cell proliferation.