Neurovascular anatomical variations in the anterior palate observed on CBCT images

Objective: This study aimed to assess the presence of additional foramina and canals in the anterior palate region, through cone beam computed tomography (CBCT) images, describing their location, direction, and diameter. Materials & Methods: CBCT exams of 178 subjects displaying the anterior maxilla were included and the following parameters were registered: gender; age group; presence of additional foramina in the anterior palate (AFP) with at least 1 mm in diameter; location and diameter of AFP; and direction of bony canals associated with AFP. Results: Twenty-eight patients (15.7%) presented AFP and in total 34 additional foramina were registered. No statistical differences between patients with or without AFP were found for gender or age. The average diameter of AFP was 1.4 mm (range from 1 to 1.9 mm). Their location was variable, with most of the cases occurring in the alveolar process near the incisors or canines (n = 27). In 18 cases, AFP was associated with bony canals with upward or oblique direction toward the anterior nasal cavity floor. In 14 cases, the canal presented as a direct extension of the canalis sinuosus, in an upward direction laterally to the nasal cavity aperture. In two cases, the canal was observed adjacent to the incisive and joined the nasopalatine canal superiorly. Discussion: CBCT images have a crucial role in the recognition of anatomical variations by allowing detailed tridimensional evaluations. Additional foramina and canals in the anterior region of the upper jaw are relatively frequent. Practitioners should be aware and trained to identify these variations. Conclusions: Over 15% of the population studied had additional foramina in the anterior palate, between 1 mm and 1.9 mm wide, with variable locations. In most cases the canals associated with these foramina either presented as a direct extension of the canalis sinuosus, or coursed towards the nasal cavity floor.

Prevalence of enamel defects in permanent teeth of patients with complete cleft lip and palate

Objective: To evaluate the prevalence, types, location, and characteristics of enamel defects in anterior permanent teeth of patients with complete unilateral and bilateral cleft lip and palate, as well as the relation with the cleft. Setting: Hospital for Rehabilitation of Craniofacial Anomalies, Bauru, São Paulo, Brazil. Participants: Eighty patients of both genders, 12 years and older, with unilateral or bilateral cleft lip and palate. Methods: A single examiner carried out clinical examination under artificial light with a dental probe and mirror after drying teeth according to the modified DDE index. Results: Seventy-four of 80 patients presented with at least one tooth affected by enamel defects: 165 of 325 evaluated teeth (50.8%) presented enamel defects, with hypoplasia being the most prevalent (50.7%), followed by diffuse opacity (23.1%) and demarcated opacity (18.4%). The most affected tooth was 21 (36.5%), followed by 11 (34%), located at the middle (40%) and incisal (33%) thirds. Most defects occur at the buccal surface (47.7%), followed by the distal (22.7%), the mesial (19%), and the palatal (10.6%) surfaces. A significant relationship was found between the cleft side and enamel defects. Conclusion: Upper anterior teeth of patients with complete cleft lip and palate present a high prevalence of enamel defects; the highest percentage on the cleft side suggests that the cleft does influence the occurrence of enamel defects in permanent teeth.

Influence of palatoplasty on occlusion of patients with isolated cleft palate

OBJECTIVE: This study compared the dental arch morphology of adult patients with isolated cleft palate in order to verify the influence of palatoplasty on occlusion. METHODS: Cast models of 77 patients, 30 males and 47 females, with an average age of 21 years and no syndromes were taken. They were in the permanent dentition and had not undergone orthodontic treatment. The sample was divided into non-operated and operated patients, the latter having been submitted to palatoplasty at a mean age of 2.2 years. RESULTS: Almost 80% of the sample exhibited sagittal discrepancies in the inter-arch relationship, with a Class II malocclusion prevailing (59.74%) followed by Class III (20,78%), regardless of palatoplasty. Transverse analysis showed a 23% incidence of posterior crossbite also not influenced by palatoplasty. Intra-arch relationship indicated that constriction and crowding on the upper arch were more frequent in the operated group (p=0.0238 and p=0.0002, respectively), showing an influence of palatoplasty on its morphology. The predominant morphological characteristics in patients with isolated cleft palate were a Class II malocclusion, upper dental arch constriction and upper and lower anterior crowding. CONCLUSION: The influence of palatoplasty was restricted to constriction and crowding of the upper dental arch, with no interference from the extension of the cleft, except for the upper crowding, which occurred more in patients with complete cleft palates.

La dirección soft y hard de recursos humanos desde los principios éticos: una contrastación empírica

[ES] Teniendo en cuenta la importancia de una gestión ética de los recursos humanos, el objetivo del presente trabajo consiste en determinar si las empresas aplican diferentes modelos de gestión. Para ello, se ha tratado de comprobar si las empresas aplican una dirección de recursos humanos (DRRHH) soft o hard y sobre la base de qué perspectivas éticas lo hacen, tratando de contrastar los cuatro modelos de DRRHH propuestos por Greenwood (2004). El estudio empírico realizado a una muestra de 189 empresas con sede en la Comunidad Autónoma de Canarias ha permitido contrastar estos cuatro modelos, así como identificar la existencia de dos nuevos. Estos resultados nos permiten abrir una nueva línea de investigación en la que se tenga en cuenta los aspectos éticos en la gestión de los recursos humanos.

Herbivory intensity over two coexisting macrophytes on soft bottoms of Gran Canaria Island

Máster en Oceanografía

Automatic clothes segmentation for soft biometrics

[EN]During the last decade, researchers have verified that clothing can provide information for gender recognition. However, before extracting features, it is necessary to segment the clothing region. We introduce a new clothes segmentation method based on the application of the GrabCut technique over a trixel mesh, obtaining very promising results for a close to real time system. Finally, the clothing features are combined with facial and head context information to outperform previous results in gender recognition with a public database.

Manifestazioni Cranio-facciali delle Neurofibromatosi

The term neurofibromatosis (NF) subsumes at least seven different genetic disorders associated by the presence of neurofibromas located in the skin, oral cavity, visceral and skeletal level. As NF1 (Von Recklinghausen disease), one of the most common genetic diseases, can have oral manifestations, dentists have to be aware about pathognomonic features. The thesis’ target is the literature’s review on the NF1 manifestations either systemic or cefalic area and these features’ research in a specimen of 30 patients NF1 affected. NF1 is manifested in the cefalic area locating either in the jaws (isolated neurofibromas, ipoplasia or bone structures absence) or soft tissues (fibromas and neurofibromas located in: cheeck, lips, oral mucosa, tongue, mouth’s floor, gingiva and palate). Frequently, NF1 patients are affected by dental anomalies of position, number and eruption, that determinates the possibility of orthopaedic-orthodontic problems. An increased prevalence of the caries risk and a possible pulpar involvement of neurofibromas is reported. Clinical and radiographical typical signs of the disease and specific indications for the differential diagnosis with other oral pathologies are described (cysts and odontogenic tumors, periapical lesions of endodontic origin and severe parodontitis). The importance of screening programs and periodical follow-ups (biannual dental visits from the age of four years, annual X-ray checks from the age of six) is supported by the high frequency of manifestations at hard and soft tissues level of the cefalic area and by the documented risk of malignant transformation.

Hypersonic elastic excitations in soft mesoscopic structures

This dissertation is devoted to the experimental exploration of the propagation of elastic waves in soft mesoscopic structures with submicrometer dimensions. A strong motivation of this work is the large technological relevance and the fundamental importance of the subject. Elastic waves are accompanied by time-dependent fluctuations of local stress and strain fields in the medium. As such, the propagation phase velocities are intimately related to the elastic moduli. Knowledge of the elastic wave propagation directly provides information about the mechanical properties of the probed mesoscopic structures, which are not readily accessible experimentally. On the other hand, elastic waves, when propagating in an inhomogeneous medium with spatial inhomogeneities comparable to their wavelength, exhibit rather rich behavior, including the appearance of novel physical phenomena, such as phononic bandgap formation. So far, the experimental work has been restricted to macroscopic structures, which limit wave propagation below the KHz range. It was anticipated that an experimental approach capable of probing the interplay of the wave propagation with the controlled mesoscopic structures would contribute to deeper insights into the fundamental problem of elastic wave propagation in inhomogeneous systems. The mesoscopic nature of the structures to be studied precludes the use of traditional methods, such as sound transmission, for the study of elastic wave propagation. In this work, an optical method utilizing the inelastic scattering of photons by GHz frequency thermally excited elastic waves, known as Brillouin light scattering spectroscopy (BLS), was employed. Two important classes of soft structures were investigated: thin films and colloidal crystals. For the former, the main interest was the effect of the one-dimensional (1D) confinement on the wave propagation due to the presence of the free-surface or interface of the layer and the utilization of these waves to extract relevant material parameters. For the second system, the primary interest was the interaction of the elastic wave and the strong scattering medium with local resonance units in a three-dimensional (3D) periodic arrangement.

Oxymoron,progetto di un grattacielo direzionale a Shenzhen, Cina applicazione della Soft Kill Option (SKO) nella progettazione architettonica

Lo scopo della tesi è quello di affrontare la progettazione con un approccio,quanto più attuale e per certi versi avanguardista, chiamato Parametric design (progettazione parametrica), accoppiato efficacemente col concetto di Arte generativa (in questo caso Architettura). Già nel 1957 Luigi Moretti affrontò il tema dell’architettura parametrico-generativa fondando l’IRMOU (Istituto per la Ricerca Matematica e Operativa applicata all'Urbanistica) e oggi è una mentalità molto diffusa nei più grandi studi del mondo. Il tema non è solo tecnologico o informatico strumentale, ma è proprio un modo di pensare e immaginare il possibile, costruito o naturale che sia. E’ un modo di vivere la propria creatività. L’aggettivo “generativa” è legato al fatto che l’arte in esame è generata seguendo regole preimpostate e ben definite dal progettista, coerentemente agli obiettivi e alle finalità del progetto. L’evoluzione delle stesse, seguendo relazioni molto semplici, può dar vita a risultati sorprendenti e inaspettati, dotati di una notevole complessità che però, se letta nell’insieme, è perfettamente in armonia con l’idea progettuale di partenza. Il fascino di questa materia è il legame entusiasmante che crea tra architettura, ingegneria, poesia, filosofia, matematica, biologia, fisica, pittura ecc ecc. Questo perché i concetti di evoluzione, di relazione e di generazione appartengono a tutto ciò che ci circonda, e quindi alla concezione umana di vita. E’ possibile in questo modo permeare il costrutto progettuale con principi e regole oggettivamente riconoscibili e apprezzabili dallo spettatore perché instrisi di una forte veridicità processuale. Il titolo "Oxymoron" è la traduzione inglese della figura retorica ossimoro,la quale è strettamente connessa all’ispirazione progettuale: proviene dall’indagine approfondita di processi evolutivi (distruttivi in questo caso) caratterizzanti realtà naturali che, esplorate con sempre più accuratezza, determinano morfologie e forme aventi profonde radici strutturali. La distruzione che crea lo spazio. La genesi stessa della forma segue predominanti algoritmi matematici governati e corretti da variabili di diversa natura che definiscono l'enviroment di influenze interagenti ed agenti sul campione di studio. In questo caso la ricerca è focalizzata su processi erosivi fisici e chimici, di agenti esterni (quali vento e sali rispettivamente) ,di cui materiali inorganici, quali minerali e aggregati degli stessi (rocce), sono soggetti. In particolare, l’interesse è approfondito su fenomeni apparentemente emergenti dei tafoni e dei cosiddetti Micro canyon. A tal scopo si sfrutterà un metodo di soft kill option (SKO) di ottimizzazione topologica (optimization topology) attraverso gli strumenti informatici più idonei quali software di modellazione parametrica e di calcolo computazionale. La sperimentazione sta proprio nell'utilizzare uno strumento concepito per uno scopo, con un'ottica strettamente ingegneristica, per un'altra meta, ossia ricavare e ottenere se possibile un metodo di lavoro o anche solo un processo generativo tale da riprodurre o simulare casi e situazioni riscontrabili in natura negli eventi soggetti a erosione. Il tutto coerente con le regole che stanno alla base della genesi degli stessi. Il parallelismo tra singolarità naturale e architettura risiede nella generazione degli spazi e nella combinazione di questi. L’ambizioso obiettivo è quello di innescare un ciclo generativo, che messo in comunicazione diretta con un contesto variegato ed eterogeneo, dia vita a una soluzione progettuale dall'alto contenuto morfologico e spaziale.

From MALDI-TOF mass spectrometry to soft-landing for electronics

Within this PhD thesis matrix assisted laser desorption/ionization mass spectrometry (MALDI-MS) has been used as a reliable tool for the quantitative characterization of giant molecules, such as alkyl substituted and unsubstituted large polycyclic aromatic hydrocarbons (PAH), which cannot be characterized by conventional analytic techniques due to their lack of solubility. The use of the MALDI solvent-free technique for the sample preparation and the application of the standard addition method have allowed the quantitative characterization of synthetic PAH mixtures. The knowledge, acquired by studying these representative systems, has been then transferred to the quantitative analyses of complex and slightly soluble natural PAH mixtures, such as mesophase pitch. Moreover, the possibility to ionize intractable and insoluble molecules via mass spectrometry has been recognized to be not only a powerful analytical method, but also to represent a unique change to handle giant aromatic systems and to deposit them on a surface for further investigations, in a process, which is defined as “soft-landing”. Within this novel deposition technique, ions of the desired analytes or analyte mixtures are generated by means of an MS ionization source, discriminated by their different mass to charge ratios via a mass analyzer and landed with retention of their structure on a desired surface. This soft-deposition is guaranteed by the use of decelerating potentials, which have in this work been recognized to influence the final packing of the analyte molecules reaching the landing surface. For a more detailed study of the electrical field action on disc-like and rod-like molecules, soft-landing-independent experiments have been additionally carried out. As a result unidirectionally ordered films of the analyte molecules have been obtained due to the application of an external electrical strength. This versatile alignment technique has then been used for obtaining ordered layers of semiconducting materials for the fabrication of organic field effect transistors (OFET) with improved performances.

Modeling and simulations of some anisotropic soft-matter systems: from biaxial to chiral materials

We have modeled various soft-matter systems with molecular dynamics (MD) simulations. The first topic concerns liquid crystal (LC) biaxial nematic (Nb) phases, that can be possibly used in fast displays. We have investigated the phase organization of biaxial Gay-Berne (GB) mesogens, considering the effects of the orientation, strength and position of a molecular dipole. We have observed that for systems with a central dipole, nematic biaxial phases disappear when increasing dipole strength, while for systems characterized by an offset dipole, the Nb phase is stabilized at very low temperatures. In a second project, in view of their increasing importance as nanomaterials in LC phases, we are developing a DNA coarse-grained (CG) model, in which sugar and phosphate groups are represented with Lennard-Jones spheres, while bases with GB ellipsoids. We have obtained shape, position and orientation parameters for each bead, to best reproduce the atomistic structure of a B-DNA helix. Starting from atomistic simulations results, we have completed a first parametrization of the force field terms, accounting for bonded (bonds, angles and dihedrals) and non-bonded interactions (H-bond and stacking). We are currently validating the model, by investigating stability and melting temperature of various sequences. Finally, in a third project, we aim to explain the mechanism of enantiomeric discrimination due to the presence of a chiral helix of poly(gamma-benzyl L-glutamate) (PBLG), in solution of dimethylformamide (DMF), interacting with chiral or pro-chiral molecules (in our case heptyl butyrate, HEP), after tuning properly an atomistic force field (AMBER). We have observed that DMF and HEP molecules solvate uniformly the PBLG helix, but the pro-chiral solute is on average found closer to the helix with respect to the DMF. The solvent presents a faster isotropic diffusion, twice as HEP, also indicating a stronger interaction of the solute with the helix.

Nanomechanical and phononic properties of structured soft materials

Significant interest in nanotechnology, is stimulated by the fact that materials exhibit qualitative changes of properties when their dimensions approach ”finite-sizes”. Quantization of electronic, optical and acoustic energies at the nanoscale provides novel functions, with interests spanning from electronics and photonics to biology. The present dissertation involves the application of Brillouin light scattering (BLS) to quantify and utilize material displacementsrnfor probing phononics and elastic properties of structured systems with dimensions comparable to the wavelength of visible light. The interplay of wave propagation with materials exhibiting spatial inhomogeneities at sub-micron length scales provides information not only about elastic properties but also about structural organization at those length scales. In addition the vector nature of q allows, for addressing the directional dependence of thermomechanical properties. To meet this goal, one-dimensional confined nanostructures and a biological system possessing high hierarchical organization were investigated. These applications extend the capabilities of BLS from a characterization tool for thin films to a method for unravelingrnintriguing phononic properties in more complex systems.

A new double laser pulse pumping scheme for transient collisionally excited plasma soft X-ray lasers

Within this thesis a new double laser pulse pumping scheme for plasma-based, transient collisionally excited soft x-ray lasers (SXRL) was developed, characterized and utilized for applications. SXRL operations from ~50 up to ~200 electron volt were demonstrated applying this concept. As a central technical tool, a special Mach-Zehnder interferometer in the chirped pulse amplification (CPA) laser front-end was developed for the generation of fully controllable double-pulses to optimally pump SXRLs.rnThis Mach-Zehnder device is fully controllable and enables the creation of two CPA pulses of different pulse duration and variable energy balance with an adjustable time delay. Besides the SXRL pumping, the double-pulse configuration was applied to determine the B-integral in the CPA laser system by amplifying short pulse replica in the system, followed by an analysis in the time domain. The measurement of B-integral values in the 0.1 to 1.5 radian range, only limited by the reachable laser parameters, proved to be a promising tool to characterize nonlinear effects in the CPA laser systems.rnContributing to the issue of SXRL pumping, the double-pulse was configured to optimally produce the gain medium of the SXRL amplification. The focusing geometry of the two collinear pulses under the same grazing incidence angle on the target, significantly improved the generation of the active plasma medium. On one hand the effect was induced by the intrinsically guaranteed exact overlap of the two pulses on the target, and on the other hand by the grazing incidence pre-pulse plasma generation, which allows for a SXRL operation at higher electron densities, enabling higher gain in longer wavelength SXRLs and higher efficiency at shorter wavelength SXRLs. The observation of gain enhancement was confirmed by plasma hydrodynamic simulations.rnThe first introduction of double short-pulse single-beam grazing incidence pumping for SXRL pumping below 20 nanometer at the laser facility PHELIX in Darmstadt (Germany), resulted in a reliable operation of a nickel-like palladium SXRL at 14.7 nanometer with a pump energy threshold strongly reduced to less than 500 millijoule. With the adaptation of the concept, namely double-pulse single-beam grazing incidence pumping (DGRIP) and the transfer of this technology to the laser facility LASERIX in Palaiseau (France), improved efficiency and stability of table-top high-repetition soft x-ray lasers in the wavelength region below 20 nanometer was demonstrated. With a total pump laser energy below 1 joule the target, 2 mircojoule of nickel-like molybdenum soft x-ray laser emission at 18.9 nanometer was obtained at 10 hertz repetition rate, proving the attractiveness for high average power operation. An easy and rapid alignment procedure fulfilled the requirements for a sophisticated installation, and the highly stable output satisfied the need for a reliable strong SXRL source. The qualities of the DGRIP scheme were confirmed in an irradiation operation on user samples with over 50.000 shots corresponding to a deposited energy of ~ 50 millijoule.rnThe generation of double-pulses with high energies up to ~120 joule enabled the transfer to shorter wavelength SXRL operation at the laser facility PHELIX. The application of DGRIP proved to be a simple and efficient method for the generation of soft x-ray lasers below 10 nanometer. Nickel-like samarium soft x-ray lasing at 7.3 nanometer was achieved at a low total pump energy threshold of 36 joule, which confirmed the suitability of the applied pumping scheme. A reliable and stable SXRL operation was demonstrated, due to the single-beam pumping geometry despite the large optical apertures. The soft x-ray lasing of nickel-like samarium was an important milestone for the feasibility of applying the pumping scheme also for higher pumping pulse energies, which are necessary to obtain soft x-ray laser wavelengths in the water window. The reduction of the total pump energy below 40 joule for 7.3 nanometer short wavelength lasing now fulfilled the requirement for the installation at the high-repetition rate operation laser facility LASERIX.rn

A soft-tetramer model for diblock copolymer melts: structure formation and geometric characterization

The ability of block copolymers to spontaneously self-assemble into a variety of ordered nano-structures not only makes them a scientifically interesting system for the investigation of order-disorder phase transitions, but also offers a wide range of nano-technological applications. The architecture of a diblock is the most simple among the block copolymer systems, hence it is often used as a model system in both experiment and theory. We introduce a new soft-tetramer model for efficient computer simulations of diblock copolymer melts. The instantaneous non-spherical shape of polymer chains in molten state is incorporated by modeling each of the two blocks as two soft spheres. The interactions between the spheres are modeled in a way that the diblock melt tends to microphase separate with decreasing temperature. Using Monte Carlo simulations, we determine the equilibrium structures at variable values of the two relevant control parameters, the diblock composition and the incompatibility of unlike components. The simplicity of the model allows us to scan the control parameter space in a completeness that has not been reached in previous molecular simulations.The resulting phase diagram shows clear similarities with the phase diagram found in experiments. Moreover, we show that structural details of block copolymer chains can be reproduced by our simple model.We develop a novel method for the identification of the observed diblock copolymer mesophases that formalizes the usual approach of direct visual observation,using the characteristic geometry of the structures. A cluster analysis algorithm is used to determine clusters of each component of the diblock, and the number and shape of the clusters can be used to determine the mesophase.We also employ methods from integral geometry for the identification of mesophases and compare their usefulness to the cluster analysis approach.To probe the properties of our model in confinement, we perform molecular dynamics simulations of atomistic polyethylene melts confined between graphite surfaces. The results from these simulations are used as an input for an iterative coarse-graining procedure that yields a surface interaction potential for the soft-tetramer model. Using the interaction potential derived in that way, we perform an initial study on the behavior of the soft-tetramer model in confinement. Comparing with experimental studies, we find that our model can reflect basic features of confined diblock copolymer melts.