Estudo das perdas de água no sistema de abastecimento e nas residências do conjunto Benjamim Sodré

Neste trabalho é apresentado um estudo das perdas de água no sistema de abastecimento e nas residências do Conjunto Benjamim Sodré. O trabalho foi dividido em duas etapas, sendo a primeira experimental e a segunda de resultados. Posteriormente os dados foram tratados e avaliados e os principais resultados foram: a caracterização e avaliação do cadastro de consumidores, o volume faturado e medido das subcategorias do Conjunto, bem como, as vazões de todo o Sistema de Abastecimento de Água (SAA). Além disso, foram determinados alguns indicadores básicos de desempenho, como índice de perda na distribuição (70,04%), índice de perda no faturamento (70,61%), índice linear bruto de perda (157,96 L/m.dia), índice de perda por ligação (1.446 L/ligação.dia), índice de hidrometração (72,27%) e o Índice Global de Perdas (70,93%). Além disso, foi possível ter o conhecimento do nível sócio-econômico de 30% população residente, das subcategorias R2 e R3 no Conjunto (176 imóveis), onde os resultados mostraram que cerca de 94% dos entrevistados que pagam somente uma taxa para consumo afirmaram praticar desperdícios de água em suas residências. Procurou-se analisar a qualidade da água fornecida a população e cerca de 71,50% dos entrevistados considerou de má qualidade, o que de certa forma pode estar contribuindo com ocorrências de doenças de veiculação hídrica, pois nos últimos anos foi verificado que 24% da população tiveram problemas como diarréias, verminoses, hepatite A e escabiose. Além disso, foi feita uma avaliação do uso da água nas diversas atividades domésticas das subcategorias R2 e R3. Há uma perda de R$ 426,38 ao mês na conta de 15 consumidores que alegaram ter vazamentos na residência. Foi mostrado que para a atividade de lavar louça o consumidor teria uma redução no valor da conta de água de 89,28% em média, para tomar banho 43,66%, lavar roupa na máquina 34,23%, para lavar o pátio ou a calçada 84,80%, e para escovar os dentes 17,06%, referentes as subcategorias R2 e R3.

Espacialização de informações na gestão de sistemas de abastecimento de água utilizando sistema de informação geográfica

Avaliar a espacialização de informações na gestão de Sistema de Abastecimento de Água (SAA). Para isso, foram definidos e adotados os dados da pesquisa (Fase 1), sendo dividido em dados de perdas reais, comerciais e Despesas de exploração. Na Fase 2, a base cartográfica da área de estudo e os dados adotados foram armazenados e organizados em Sistema de Informação Geográfica (SIG), utilizando o software ArcGis 9.3, onde foi construído o modelo de dados para a pesquisa, e definida a topologia a ser utilizada para identificação dos dados espacializados, a construção do banco de dados georreferenciado e a criação dos layers. Na fase 3 foi realizado o cálculo do balanço hídrico nas principais unidades dos SAAs estudados sendo determinadas as perdas na adução de água bruta, no tratamento, na reservação, e na distribuição. Na fase 4 foram calculados indicadores para avaliar o desempenho dos SAAs, como: índice de cobertura, índice total de perda real, índice de perda na arrecadação, índice de perda de faturamento, índice de consumo de energia em SAA, índice de despesas com energia elétrica, entre outros. Na fase 5 foi proposta a espacialização e apresentação em SIG dos resultados obtidos nas fases anteriores. Com isso, considerando os dados adotados, foi possível identificar os valores das perdas reais e dos indicadores de desempenho em cada setor do SAA estudado, sendo, por exemplo, o setor 9, o que apresentou maior índice de perda total, chegando a 59,10%, seguido dos setores 4, 8 e 5. A perda mais significante para o sistema foi a perda na distribuição, com o setor 9 apresentando perda de 57%; a perda no tratamento foi de 3,4%, no setor 3; e os setores com maior índice de perda na adução, foram os setores 6 e 8, com 3,5%. Os percentuais de água não faturada, foram maiores nos setores 1 e 5. Os setores 1, 3, 4 e 6 são os que apresentaram maior consumo de energia elétrica por volume de água produzido. Portanto, a espacialização dos dados em SIG facilitou a visualização e análise dos dados adotados na pesquisa.

Proposta metodológica para avaliação da matriz energética brasileira em prol do equilíbrio: competitividade e sustentabilidade

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência do aumento energético proveniente de dieta hiperlipídica na disfunção cardíaca em ratos com estenose aórtica supravalvar: participação das cadeias pesadas de miosina e da bomba de cálcio do retículo sarcoplasmático

Pós-graduação em Fisiopatologia em Clínica Médica - FMB

A organização do trabalho pedagógico na escola e o sistema apostilado de ensino: estudo de caso

Pós-graduação em Educação Escolar - FCLAR

Aspectos técnico, econômicos e ecológicos de processos de produção de hidrogênio

Pós-graduação em Engenharia Mecânica - FEG

Estudo da variação da porcentagem e da estimativa de geração de gás metano para o aterro sanitário do município de Rio Claro - SP

Increased demand for energy and the search for alternative energy sources are remarkable and current facts. The management of domestic solid waste is also part of the issue in view of the possibility of power generation in existing landfills, which could provide financial autonomy to the system of waste management and improve the environmental balance of landfills in Brazil, currently only used for final solids disposal. Landfill gas is a viable alternative energy source has been tested in landfills in the World and in Brazil. Thus, the research aimed to evaluate the percentage of methane (CH4) present in three sinks of gases from a landfill in the municipality of Rio Claro – SP (Brazil), and to estimate the potential methane generation over its life through the application of a mathematical model. As a result it was found that in general the percentage of methane present in the gases is significant, between 50 and 62%. It was also noted that waste with disposal time between 8 and 12 months already are in the methanogenic stage. Finally, there was a tendency to increase the generation of methane in the transition periods of rain and drought

Analise do sistema de medição em peças aeronaúticas através do estudo de R&R (repetibilidade e reprodutibilidade)

The Measurement System Analysis (MSA - Measurement System Analysis) is a statistical methodology developed to study and analyze the behavior of the measurement systems, and, therefore, allow the increased of the confidence readings performed by measuring instruments. It’s widely used in the automotive industry since the 90’s and is a mandatory requirement for the approval of the parts according to ISO Standard of the automotive sector. However, the aerospace industry doesn’t require this type of Study, once which the vast majority of aeronautics parts have characteristics (dimensions) with very tight tolerances, closed, ie, at the home of microns. This work aims to create lists of recommendations for definitions of measuring instruments in developing of control plans, which correlates tolerances fields of characteristics for different settings and acceptance of the instrument, classified as optimum, recommended and not recommended, through of the study of R&R (Repeatability and Reproducibility) in aeronautics parts. Every methodology of the experimental part was based on modern strategy of continuous improvement, the DMAIC (Define Measure Analyze Implant Control), in order to achieve better measurement method used in the control of milling aeronautics parts, identifying and reducing the variations of the measurement process. The results of the R&R Study in large part of measuring instrument manuals were considered acceptable and/or recommended, ie with values of %P/T and %RR lower than 30%, providing statistical data which have enabled the elaboration of tables of recommendations, which, from this work, have turned into very important documents and aid for Process Engineering, having in their hands a technical study able to identify which is the most appropriate instrument to get a more robust dimensional... (Complete abstract click electronic access below)

Avaliação da auto-suficiência energética em reatores anaeróbios aplicados ao tratamento de resíduos da indústria de produção do etanol

Ethanol, the main automotive biofuel, has its production based on the fermentation of sugars found in biological materials and on the distillation of the alcoholic media formed during the fermentative process. Stillage is the main residue from ethanol production, containing a high organic loading in addition to acidic and corrosive characteristics. Considering the available technologies to treat stillage, we highlight anaerobic digestion, which allows the reduction of the impacts associated to pollutants loading of this effluent and the generation of energy from the methane gas produced in the process. Based on the high treatment efficiency usually associated to the anaerobic process, this work aimed to assess whether anaerobic systems applied to the treatment of stillage are energetically self-sufficient. First we evaluated the energy recovery capacity in an anaerobic reactor applied to the treatment of stillage resulting from corn-to-ethanol processing. The results indicated the great influence that a correct selection of electrical equipment and their respective operating periods have on the net energy balance of the anaerobic treatment. The high energy consumption of the heater would not allow the system to achieve a positive net energy balance – the maximum energy recovery would reach only 0.68% of the consumption. However, the replacement of the mixture equipment would result in energy gains ranging from 8.5 to 967.9% of the consumption. In this work we also assessed the efficiency of methane yields for a few studies and the correlation between some parameters of the anaerobic process. With respect to the methane yield, we noted that mesophilic systems tend to be more advantageous than the thermophilic ones (efficiency of 76.45 ± 22.51% vs. 69.40 ± 30.36%). Considering the study... (Complete abstract click electronic access below)

Avaliação do desempenho ambiental da produção canavieira com colheita mecanizada: contribuição à implantação de um sistema simplificado de gestão ambiental da propriedade

The consuming of the natural resources in the agricultural sector does not represent only one external factor of the productive process, but also it implies in a bigger cost for the production, justified for this environmental degradation. In view of the necessity of evaluating the sustainment of the agricultural businesses, the use of performance indicators if makes of extreme importance. The measurement of the support through environmentalindicators is one of the most accepted forms of performing the evaluation of one given agricultural activity. In this context, the Base System for Eco-certification of Agricultural Businesses (Eco-cert Rural) developed by the Embrapa Environment at Jaguariúna/SP, has for purpose to present a method of evaluation of the agricultural businesses, not only of the point of view of the ecological performance, as well as considering the social, economic and organizational aspects. Through the analysis of the performance of the activity and the regularization of the disconformities found, it makes possible the eco-certification of the activities in the varied existing protocols, offering technologies designed to the sustainable development of the agricultural businesses. Using Eco-cert.Rural, this work evaluated the contribution of the use of mechanized harvest in sugar cane handling, front to the traditional system of manual harvest, using the fire. In the Sugar Cane Activity General Performance Index, Agrícola Rio Claro scored 2,08 of a maximum of 15. Amongst all the indicators, those wich reached performance worse had been related to the Use of Energy and the Income, by increasing fossil fuel consumptiom, and implying income concentration due to resignations of rural workers. However, the improvements on the environment quality by supressing manual harvest through fire are very significant. Beyond the great reduction in...(Complete abstract click electronic access below)

Avaliação da auto-suficiência energética de reatores anaeróbios no tratamento de esgoto sanitário e água cinza

The anaerobic treatment of sewage is widely employed in Brazil and it is an appreciated way for the treatment of effluents, helping to reduce the environmental impact in rivers. The methane gas obtained from the process can be applied to improve the energetic efficiency of the system, reducing the amount of waste and the cost of the treatment process. This work presents the net energy balance of anaerobic reactors applied to the treatment of sewage. The analysis was performed considering full-scale and laboratory-scale treatment systems. In laboratory scale, the results from three kinds of systems were compared regarding the biological treatment of greywater. Two of them (UASB7 and UASB12) were anaerobic and the other one was a combined anaerobic-aerobic system (UASB7/SBR6). Greywater methanization (compared to theoretical maximum) was calculated considering 100% removal (g BOD/day), the literature percentage removal and the anionic surfactant presence in the effluentt. For each of these three cases, the efficiencies were, respectively, 16.9%, 43.6% and 51.3% in UASB7 reactor, 25.6%, 50.3% and 59.2% in UASB12 reactor and 30.6%, 61.2% and 71.9% in UASB7/SBR6 reactor. The energetic potential was found to be 4.66x10-4, 7.77x10-4 and 5.12x10-4 kWh/L for the UASB7, UASB12 and UASB7/SBR6 reactors, respectively. The pumping system, the aeration (in the anaerobic-aerobic system) and the temperature controlled heating system were considered to calculate the energetic consumption. However, the third one was not employed since tropical regions like Brazil do not need heating systems and also because of its high energetic consumption. The calculated net energy balance in the reactors was negative in the case of greywater, respectively -0.16, -0.28 and -0.18 kWh/L for the reactors UASB7, UASB12 and UASB7/SRB6. In full scale (ETE Jardim das Flores - Rio Claro, SP), the average energy... (Complete abstract click electronic access below)

Avaliação da auto-suficiência energética de reatores anaeróbios no tratamento de esgoto sanitário e de água preta

The purpose of this project is to verify whether anaerobic reactors applied to sewage treatment are energetically self-sufficient. This evaluation can be made by balancing the methane produced through the anaerobic transformation stages (hydrolysis, acidogenesis, acetogenesis and methanogenesis) and the reactor energy consumption requirements. The original project included methanogenic activity tests, which could not be performed due to setbacks in the installation of an analytical instrument. Scientific articles about bench- and full-scale anaerobic reactors were investigated instead. An average substrate-to-methane conversion efficiency of 58,2±18,6% was found for the bench-scale reactors and higher efficiencies (89,2%) were found for the cases which had higher Organic Loading Rates (OLRs) values. The average energy output was 0,013 kWh/Lsewage, value unable to meet the energy needs for the reactor operation, considering equipments normally used such as temperature controller. This balance can become positive if few hypotheses are made, for example (i) to eliminate the use of temperature controller (ii) to alter the operation pattern from continuous to intermittent. Based on energy balance assessment of eight bench-scale reactors, it was observed that the implementation of a system for biogas utilization is not energetically feasible. However, interesting results were found for a full-scale sewage treatment plant, ETE Ouro Verde – Foz do Iguaçu, PR, Brazil. Even though its substrate-tomethane conversion efficiency was about 10% only, the energy balance was quite positive, with energy consumption of 68 kWh/month and energy production of 660 kWh/month. This analysis leads us to conclude that energy recovery from full-scale sewage treatment plants should be practiced by other plants

Efeito da ingestão aguda de taurina sobre o desempenho físico e metabolismo lipídico de nadadores de elite de Ribeirão Preto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Recomendações para criação e gerenciamento de um sistema da qualidade em empresas de autopeças

This paper addresses the difficulties and best practices of a quality system of an automotive parts company. In it will be discussed the features and benefits of the proper use of a system of management and quality assurance. It emphasizes the proper use of tools and methodologies that aim improving the quality of processes and products. It also has some guidance information given by the standards of quality which helps the implementation of the quality system and the standards are important because it attests to the quality of companies. So, this work has as objective to guide the creation and management of the quality system in auto parts companies, which seek an increase in the quality of products and processes, it also helps to certify companies in the current quality standard for the sector, ISO TS 16949, and thus increases the competitiveness of companies in this market. As result, this paper resumes good practices, difficulties and key steps for creating and managing a quality system

Efeitos do fipronil sobre o metabolismo energético no fígado perfundido de rato: Hyllana Catarine Dias de Medeiros. -

Pós-graduação em Ciência Animal - FMVA