Characterization of primary biogenic aerosol particles by DNA analysis: Diversity of airborne Ascomycota and Basidiomycota

Primary biogenic aerosol (PBA) particles account for large proportions of air particulate matter, and they can influence the hydrological cycle and climate as nuclei for water droplets and ice crystals in clouds, fog, and precipitation. Moreover, they can cause or enhance human, animal, and plant diseases. The actual abundance and properties of PBA particles and components in the atmosphere are, however, still poorly understood and quantified. rnIn this study, the identity, diversity, and frequency of occurrence of PBA particles were investigated by DNA analysis. Methods for the extraction, amplification, and analysis of DNA from aerosol filter samples were developed and optimized for different types of organisms, including fungi, bacteria, and plants. The investigations were focused on fungal DNA, and over 2500 sequences were obtained from air samples collected at different locations and climatic zones around the world (tropical, mid-latitude, sub-polar; continental, marine). rnNearly all fungal DNA sequences could be attributed to the phyla of Ascomycota and Basidiomycota. With regard to species richness, the ratio of Basidiomycota to Ascomycota was much higher in continental air samples (~60:40) than in marine air samples (~30:70). Pronounced differences in the relative abundance and seasonal cycles of various groups of fungi were detected in coarse and fine particulate matter from continental air, with more plant pathogens in the coarse and more human pathogens and allergens in the respirable fine particle fraction (<3 µm). The results of this study provide new information and insights into the sources of PBA particles and the interactions of the biosphere with the atmosphere, climate, and public health. rn

Analysis and development of ecologically based approaches to coastal defense

Climate-change related impacts, notably coastal erosion, inundation and flooding from sea level rise and storms, will increase in the coming decades enhancing the risks for coastal populations. Further recourse to coastal armoring and other engineered defenses to address risk reduction will exacerbate threats to coastal ecosystems. Alternatively, protection services provided by healthy ecosystems is emerging as a key element in climate adaptation and disaster risk management. I examined two distinct approaches to coastal defense on the base of their ecological and ecosystem conservation values. First, I analyzed the role of coastal ecosystems in providing services for hazard risk reduction. The value in wave attenuation of coral reefs was quantitatively demonstrated using a meta-analysis approach. Results indicate that coral reefs can provide wave attenuation comparable to hard engineering artificial defenses and at lower costs. Conservation and restoration of existing coral reefs are cost-effective management options for disaster risk reduction. Second, I evaluated the possibility to enhance the ecological value of artificial coastal defense structures (CDS) as habitats for marine communities. I documented the suitability of CDS to support native, ecologically relevant, habitat-forming canopy algae exploring the feasibility of enhancing CDS ecological value by promoting the growth of desired species. Juveniles of Cystoseira barbata can be successfully transplanted at both natural and artificial habitats and not affected by lack of surrounding adult algal individuals nor by substratum orientation. Transplantation success was limited by biotic disturbance from macrograzers on CDS compared to natural habitats. Future work should explore the reasons behind the different ecological functioning of artificial and natural habitats unraveling the factors and mechanisms that cause it. The comprehension of the functioning of systems associated with artificial habitats is the key to allow environmental managers to identify proper mitigation options and to forecast the impact of alternative coastal development plans.

Lo spreco alimentare domestico in Italia: stime, cause ed impatti

Non esiste una definizione standard di spreco alimentare, così come non esistono metodologie uniformi per calcolarlo. Gli studi finora realizzati sullo spreco sono carenti, i dati raccolti spesso insufficienti. Il cibo viene sprecato ad ogni stadio della filiera alimentare, dal campo alla tavola. Nei Paesi Membri dell’Unione Europea, le famiglie – secondo dati elaborati da Eurostat- sono le principali responsabili dello spreco. Secondo la FAO, ogni europeo spreca ogni anno 179 chili di alimenti. Last Minute Market, spin off accademico che si occupa di ridurre e recuperare lo spreco, ha stimato che a livello domestico in Italia si sprecano mediamente il 17% dei prodotti ortofrutticoli acquistati, il 15% di pesce, il 28% di pasta e pane, il 29% di uova, il 30% di carne e il 32% di latticini. Da un punto di vista economico, lo sperpero alimentare significa una perdita di 1.693 euro l’anno per famiglia. Per inquadrare lo spreco alimentare domestico in Italia e gettare luce su dati contrastanti emersi da diversi studi finora realizzati, la tesi – dopo aver presentato stime a livello globale, europeo e italiano – si concentra sull’analisi dei dati emersi da un questionario sullo spreco domestico, compilato da 3.087 italiani tra il mese di novembre e quello di dicembre 2012. L’indagine socio-economica è stata realizzata in collaborazione con la Commissione Europea (DG JCR, Istituto per la Tutela della Salute dei Consumatori) e il Karlsruhe Institut für Technologie. Il questionario è stato posto sulla piattaforma online surveymonkey. La tesi ha avuto come obiettivi l’identificazione di dati quantitativi circa “quanto si spreca” , “cosa si spreca”, l’individuazione delle cause sociali, valoriali, comportamentali e di stile di vita, dello spreco alimentare delle famiglie italiane, l’impatto economico dello spreco sul budget domestico e l’elaborazione di profili di consumatori attraverso la cluster analysis.

Comparative analysis of midline guidance and axon pathfinding in the chelicerates Achaearanea tepidariorum and Cupiennius salei

Die Neurogenese und axonale Wegfindung sind in den vergangenen Jahrzehnten Thema einer Vielzahl wissenschaftlicher Untersuchungen in den verschiedensten Organismen gewesen. Die zusammengetragenen Daten in Insekten und Crustaceen geben eine gute Übersicht darüber, wie das Nervensystem in Arthropoden aufgebaut wird. Die entwicklungsbiologischen Prozesse, die daran beteiligt sind, sind in den beiden genannten Gruppen sehr gut verstanden. In den Gruppen der Cheliceraten und Myriapoden jedoch wurden ähnliche Analysen bisher kaum durchgeführt. Das Hauptanliegen dieser Arbeit war es daher, Mechanismen in den Spinnen Achaearanea tepidariorum und Cupiennius salei, zwei Vertretern der Cheliceraten, zu untersuchen, die eine Rolle im Leitsystem der ventralen Mittellinie und bei der axonalen Wegfindung spielen. Eine Vorraussetzung hierfür sind Kenntnisse über die Architektur des Zentralnervensystems. In einem ersten Schritt beschrieb ich daher grundlegend die Morphologie des Nervensystems im Verlauf der gesamten Embryoalentwicklung. Ich konnte zeigen, dass in Spinnen ein für Arthropoden typisches Strickleiternervensystem gebildet wird. Dieses wird von segmental angelegten Neuronen geformt, wobei sowohl Gruppen von Zellen als auch einzelne Neurone daran beteiligt sind, die primären axonalen Trakte zu etablieren. Im Besonderen konnte ich eine Zelle identifizieren, die in Position, Projektionsmuster und der Expression des Markergens even-skipped vergleichbar zum PR2 Neuron in Drosophila ist, welches die posteriore Wurzel des Segmentalnervs anlegt.rnrnIn einem zweiten Ansatz untersuchte ich die ventrale Mittellinie in Spinnen im Bezug auf ihre mögliche Funktion in der axonalen Wegfindung. Es konnte gezeigt werden, dass es sich beim Epithel der Mittellinie, das die Lücke zwischen beiden Keimstreifhälften während des gesamten Prozesses der Inversion überspannt, um eine transiente Struktur handelt, die keine neuralen Zellen hervorbringt. Es ist daher vergleichbar mit der so genannten Floor plate in Vertebraten, die ebenfalls nur vorübergehend existiert. Die Untersuchung von single minded (sim) zeigte, dass es, anders als in Drosophila, wo sim ein wichtiges regulatorisches Gen für die korrekte Spezifizierung von Mittellinienzellen ist, nicht in den Zellen der Mittellinie, sondern in diesen benachbarten Zellen, exprimiert wird. Das ist vergleichbar mit Vertebraten. Zusätzlich konnte ich Expression von sim an den Basen der Gliedmassen und im Kopf nachweisen. Wie in Vertebraten könnte sim an der Musterbildung dieser Gewebe beteiligt sein. Dennoch spielt die Mittellinie in Spinnen eine wichtige Rolle als Organisator für auswachsende, kommissurale Axone. Diese Funktion teilt sie mit anderen Invertebraten und Vertebraten.rnrnDie Signaltransduktionskaskade, die an der axonalen Wegfindung an der Mittellinie beteiligt ist, ist in den verschiedensten Organismen hoch konserviert. In der vorliegenden Arbeit konnte ich sowohl in Achaearanea als auch in Cupiennius ein netrin Homolog identifizieren und eine konservierte Funktion des Wegfindungsmoleküls während der Bildung der Kommissuren aufzeigen. RNAi Experimente belegen, dass, wird die Funktion von netrin herunterreguliert, das Strickleiternervensystem nicht korrekt gebildet wird, ins Besondere die kommissuralen Faszikel. Des Weiteren konnte ich eine neue Funktion von netrin, die bisher in anderen Organsimen noch nicht beschrieben wurde, identifizieren. Neben seiner Rolle in der axonalen Wegfindung, scheint netrin auch an der epithelialen Morphogenese im zentralen Nervensystem beteiligt zu sein. In dieser Funktion scheint netrin in Gliazellen, die die epithelialen Vesikel der Invaginationsgruppen umhüllen, wichtig zu sein, um neurale Vorläuferzellen in einem undifferenzierten Zustand zu halten. Der Abbau von netrin Transkript durch RNA Interferenz führt zu einer verfrühten Segregation neuraler Vorläuferzellen aus dem epithelialen Verband der Invaginationsgruppen und zu einer Zunahme an Zellen, die den frühen Differenzierungsmarker islet exprimieren.

Risk analysis of tractor rollover in the normal operation in field

Tractor rollover represent a primary cause of death or serious injury in agriculture and despite the mandatory Roll-Over Protective Structures (ROPS), that reduced the number of injuries, tractor accidents are still of great concern. Because of their versatility and wide use many studies on safety are concerned with the stability of tractors, but they often prefer controlled tests or laboratory tests. The evaluation of tractors working in field, instead, is a very complex issue because the rollover could be influenced by the interaction among operator, tractor and environment. Recent studies are oriented towards the evaluation of the actual working conditions developing prototypes for driver assistance and data acquisition. Currently these devices are produced and sold by manufacturers. A warning device was assessed in this study with the aim to evaluate its performance and to collect data on different variables influencing the dynamics of tractors in field by monitoring continuously the working conditions of tractors operating at the experimental farm of the Bologna University. The device consists of accelerometers, gyroscope, GSM/GPRS, GPS for geo-referencing and a transceiver for the automatic recognition of tractor-connected equipment. A microprocessor processes data and provides information, through a dedicated algorithm requiring data on the geometry of the tested tractor, on the level of risk for the operator in terms of probable loss of stability and suggests corrective measures to reduce the potential instability of the tractor.

Measurement of the pair production of b-jets in proton-proton collisions at root out s = 7 TeV with the ATLAS detector

In hadronischen Kollisionen entstehen bei einem Großteil der Ereignisse mit einem hohen Impulsübertrag Paare aus hochenergetischen Jets. Deren Produktion und Eigenschaften können mit hoher Genauigkeit durch die Störungstheorie in der Quantenchromodynamik (QCD) vorhergesagt werden. Die Produktion von \textit{bottom}-Quarks in solchen Kollisionen kann als Maßstab genutzt werden, um die Vorhersagen der QCD zu testen, da diese Quarks die Dynamik des Produktionsprozesses bei Skalen wieder spiegelt, in der eine Störungsrechnung ohne Einschränkungen möglich ist. Auf Grund der hohen Masse von Teilchen, die ein \textit{bottom}-Quark enthalten, erhält der gemessene, hadronische Zustand den größten Teil der Information von dem Produktionsprozess der Quarks. Weil sie eine große Produktionsrate besitzen, spielen sie und ihre Zerfallsprodukte eine wichtige Rolle als Untergrund in vielen Analysen, insbesondere in Suchen nach neuer Physik. In ihrer herausragenden Stellung in der dritten Quark-Generation könnten sich vermehrt Zeichen im Vergleich zu den leichteren Quarks für neue Phänomene zeigen. Daher ist die Untersuchung des Verhältnisses zwischen der Produktion von Jets, die solche \textit{bottom}-Quarks enthalten, auch bekannt als $b$-Jets, und aller nachgewiesener Jets ein wichtiger Indikator für neue massive Objekte. In dieser Arbeit werden die Produktionsrate und die Korrelationen von Paaren aus $b$-Jets bestimmt und nach ersten Hinweisen eines neuen massiven Teilchens, das bisher nicht im Standard-Modell enthalten ist, in dem invarianten Massenspektrum der $b$-Jets gesucht. Am Large Hadron Collider (LHC) kollidieren zwei Protonenstrahlen bei einer Schwerpunktsenergie von $\sqrt s = 7$ TeV, und es werden viele solcher Paare aus $b$-Jets produziert. Diese Analyse benutzt die aufgezeichneten Kollisionen des ATLAS-Detektors. Die integrierte Luminosität der verwendbaren Daten beläuft sich auf 34~pb$^{-1}$. $b$-Jets werden mit Hilfe ihrer langen Lebensdauer und den rekonstruierten, geladenen Zerfallsprodukten identifiziert. Für diese Analyse müssen insbesondere die Unterschiede im Verhalten von Jets, die aus leichten Objekten wie Gluonen und leichten Quarks hervorgehen, zu diesen $b$-Jets beachtet werden. Die Energieskala dieser $b$-Jets wird untersucht und die zusätzlichen Unsicherheit in der Energiemessung der Jets bestimmt. Effekte bei der Jet-Rekonstruktion im Detektor, die einzigartig für $b$-Jets sind, werden studiert, um letztlich diese Messung unabhängig vom Detektor und auf Niveau der Hadronen auswerten zu können. Hiernach wird die Messung zu Vorhersagen auf nächst-zu-führender Ordnung verglichen. Dabei stellt sich heraus, dass die Vorhersagen in Übereinstimmung zu den aufgenommenen Daten sind. Daraus lässt sich schließen, dass der zugrunde liegende Produktionsmechanismus auch in diesem neu erschlossenen Energiebereich am LHC gültig ist. Jedoch werden auch erste Hinweise auf Mängel in der Beschreibung der Eigenschaften dieser Ereignisse gefunden. Weiterhin können keine Anhaltspunkte für eine neue Resonanz, die in Paare aus $b$-Jets zerfällt, in dem invarianten Massenspektrum bis etwa 1.7~TeV gefunden werden. Für das Auftreten einer solchen Resonanz mit einer Gauß-förmigen Massenverteilung werden modell-unabhängige Grenzen berechnet.

Exploring host-pathogen interactions through protein microarray. Large-scale protein microarray analysis revealed novel human receptors for the staphylococcal immune evasion protein FLIPr and for the neisserial adhesin NadA

Adhesion, immune evasion and invasion are key determinants during bacterial pathogenesis. Pathogenic bacteria possess a wide variety of surface exposed and secreted proteins which allow them to adhere to tissues, escape the immune system and spread throughout the human body. Therefore, extensive contacts between the human and the bacterial extracellular proteomes take place at the host-pathogen interface at the protein level. Recent researches emphasized the importance of a global and deeper understanding of the molecular mechanisms which underlie bacterial immune evasion and pathogenesis. Through the use of a large-scale, unbiased, protein microarray-based approach and of wide libraries of human and bacterial purified proteins, novel host-pathogen interactions were identified. This approach was first applied to Staphylococcus aureus, cause of a wide variety of diseases ranging from skin infections to endocarditis and sepsis. The screening led to the identification of several novel interactions between the human and the S. aureus extracellular proteomes. The interaction between the S. aureus immune evasion protein FLIPr (formyl-peptide receptor like-1 inhibitory protein) and the human complement component C1q, key players of the offense-defense fighting, was characterized using label-free techniques and functional assays. The same approach was also applied to Neisseria meningitidis, major cause of bacterial meningitis and fulminant sepsis worldwide. The screening led to the identification of several potential human receptors for the neisserial adhesin A (NadA), an important adhesion protein and key determinant of meningococcal interactions with the human host at various stages. The interaction between NadA and human LOX-1 (low-density oxidized lipoprotein receptor) was confirmed using label-free technologies and cell binding experiments in vitro. Taken together, these two examples provided concrete insights into S. aureus and N. meningitidis pathogenesis, and identified protein microarray coupled with appropriate validation methodologies as a powerful large scale tool for host-pathogen interactions studies.

Analysis of Copy Number Variants identifies new candidate genes for Autism Spectrum Disorder and Intellectual Disability

Autism spectrum disorder (ASD) and Intellectual Disability (ID) are complex neuropsychiatric disorders characterized by extensive clinical and genetic heterogeneity and with overlapping risk factors. The aim of my project was to further investigate the role of Copy Numbers Variants (CNVs), identified through genome-wide studies performed by the Autism Geome Project (AGP) and the CHERISH consortium in large cohorts of ASD and ID cases, respectively. Specifically, I focused on four rare genic CNVs, selected on the basis of their impact on interesting ASD/ID candidate genes: a) a compound heterozygous deletion involving CTNNA3, predicted to cause the lack of functional protein; b) a 15q13.3 duplication containing CHRNA7; c) a 2q31.1 microdeletion encompassing KLHL23, SSB and METTL5; d) Lastly, I investigated the putative imprinting regulation of the CADPS2 gene, disrupted by a maternal deletion in two siblings with ASD and ID. This study provides further evidence for the role of CTNNA3, CHRNA7, KLHL23 and CADPS2 as ASD and/or ID susceptibility genes, and highlights that rare genetic variation contributes to disease risk in different ways: some rare mutations, such as those impacting CTNNA3, act in a recessive mode of inheritance, while other CNVs, such as those occurring in the 15q13.3 region, are implicated in multiple developmental and/or neurological disorders possibly interacting with other susceptibility variants elsewhere in the genome. On the other hand, the discovery of a tissue-specific monoallelic expression for the CADPS2 gene, implicates the involvement of epigenetic regulatory mechanisms as risk factors conferring susceptibility to ASD/ID.

Genetic basis of variation for root traits and response to heat stress in durum wheat

Durum wheat is the second most important wheat species worldwide and the most important crop in several Mediterranean countries including Italy. Durum wheat is primarily grown under rainfed conditions where episodes of drought and heat stress are major factors limiting grain yield. The research presented in this thesis aimed at the identification of traits and genes that underlie root system architecture (RSA) and tolerance to heat stress in durum wheat, in order to eventually contribute to the genetic improvement of this species. In the first two experiments we aimed at the identification of QTLs for root trait architecture at the seedling level by studying a bi-parental population of 176 recombinant inbred lines (from the cross Meridiano x Claudio) and a collection of 183 durum elite accessions. Forty-eight novel QTLs for RSA traits were identified in each of the two experiments, by means of linkage- and association mapping-based QTL analysis, respectively. Important QTLs controlling the angle of root growth in the seedling were identified. In a third experiment, we investigated the phenotypic variation of root anatomical traits by means of microscope-based analysis of root cross sections in 10 elite durum cultivars. The results showed the presence of sizeable genetic variation in aerenchyma-related traits, prompting for additional studies aimed at mapping the QTLs governing such variation and to test the role of aerenchyma in the adaptive response to abiotic stresses. In the fourth experiment, an association mapping experiment for cell membrane stability at the seedling stage (as a proxy trait for heat tolerance) was carried out by means of association mapping. A total of 34 QTLs (including five major ones), were detected. Our study provides information on QTLs for root architecture and heat tolerance which could potentially be considered in durum wheat breeding programs.

Analysis of cumulative effects of multiple stressors on saltmarshes and consideration of management options

Natural systems face pressures exerted by natural physical-chemical forcings and a myriad of co-occurring human stressors that may interact to cause larger than expected effects, thereby presenting a challenge to ecosystem management. This thesis aimed to develop new information that can contribute to reduce the existing knowledge gaps hampering the holistic management of multiple stressors. I undertook a review of the state-of-the-art methods to detect, quantify and predict stressor interactions, identifying techniques that could be applied in this thesis research. Then, I conducted a systematic review of saltmarsh multiple stressor studies in conjunction with a multiple stressor mapping exercise for the study system in order to infer potential important synergistic stressor interactions. This analysis identified key stressors that are affecting the study system, but also pointed to data gaps in terms of driver and pressure data and raised issues for potentially overlooked stressors. Using field mesocosms, I explored how a local stressor (nutrient availability) affects the responses of saltmarsh vegetation to a global stressor (increased inundation) in different soil types. Results indicate that saltmarsh vegetation would be more drastically affected by increased inundation in low than in medium organic matter soils, and especially in estuaries already under high nutrient availability. In another field experiment, I examined the challenges of managing co-occurring and potentially interacting local stressors on saltmarsh vegetation: recreational trampling and smothering by deposition of excess macroalgal wrack due to high nutrient loads. Trampling and wrack prevention had interacting effects, causing non-linear responses of the vegetation to simulated management of these stressors, such that vegetation recovered only in those treatments simulating the combined prevention of both stressors. During this research I detected, using molecular genetic methods, a widespread presence of S. anglica (and to a lesser extent S. townsendii), two previously unrecorded non-native Spartinas in the study areas.

Measurement of the forward-backward asymmetry of Z boson decays in electron-positron pairs with the ATLAS detector in proton-proton collisions at root out s = 7TeV at the LHC

In this thesis the measurement of the effective weak mixing angle wma in proton-proton collisions is described. The results are extracted from the forward-backward asymmetry (AFB) in electron-positron final states at the ATLAS experiment at the LHC. The AFB is defined upon the distribution of the polar angle between the incoming quark and outgoing lepton. The signal process used in this study is the reaction pp to zgamma + X to ee + X taking a total integrated luminosity of 4.8\,fb^(-1) of data into account. The data was recorded at a proton-proton center-of-mass energy of sqrt(s)=7TeV. The weak mixing angle is a central parameter of the electroweak theory of the Standard Model (SM) and relates the neutral current interactions of electromagnetism and weak force. The higher order corrections on wma are related to other SM parameters like the mass of the Higgs boson.rnrnBecause of the symmetric initial state constellation of colliding protons, there is no favoured forward or backward direction in the experimental setup. The reference axis used in the definition of the polar angle is therefore chosen with respect to the longitudinal boost of the electron-positron final state. This leads to events with low absolute rapidity have a higher chance of being assigned to the opposite direction of the reference axis. This effect called dilution is reduced when events at higher rapidities are used. It can be studied including electrons and positrons in the forward regions of the ATLAS calorimeters. Electrons and positrons are further referred to as electrons. To include the electrons from the forward region, the energy calibration for the forward calorimeters had to be redone. This calibration is performed by inter-calibrating the forward electron energy scale using pairs of a central and a forward electron and the previously derived central electron energy calibration. The uncertainty is shown to be dominated by the systematic variations.rnrnThe extraction of wma is performed using chi^2 tests, comparing the measured distribution of AFB in data to a set of template distributions with varied values of wma. The templates are built in a forward folding technique using modified generator level samples and the official fully simulated signal sample with full detector simulation and particle reconstruction and identification. The analysis is performed in two different channels: pairs of central electrons or one central and one forward electron. The results of the two channels are in good agreement and are the first measurements of wma at the Z resonance using electron final states at proton-proton collisions at sqrt(s)=7TeV. The precision of the measurement is already systematically limited mostly by the uncertainties resulting from the knowledge of the parton distribution functions (PDF) and the systematic uncertainties of the energy calibration.rnrnThe extracted results of wma are combined and yield a value of wma_comb = 0.2288 +- 0.0004 (stat.) +- 0.0009 (syst.) = 0.2288 +- 0.0010 (tot.). The measurements are compared to the results of previous measurements at the Z boson resonance. The deviation with respect to the combined result provided by the LEP and SLC experiments is up to 2.7 standard deviations.

Search for Dark Matter in events with a highly energetic jet and missing transverse momentum in proton-proton collisions at root out s = 8 TeV with the ATLAS detector

The experiments at the Large Hadron Collider at the European Centre for Particle Physics, CERN, rely on efficient and reliable trigger systems for singling out interesting events. This thesis documents two online timing monitoring tools for the central trigger of the ATLAS experiment as well as the adaption of the central trigger simulation as part of the upgrade for the second LHC run. Moreover, a search for candidates for so-called Dark Matter, for which there is ample cosmological evidence, is presented. This search for generic weakly interacting massive particles (WIMPs) is based on the roughly 20/fb of proton-proton collisions at a centre-of-mass-energy of sqrt{s}=8 TeV recorded with the ATLAS detector in 2012. The considered signature are events with a highly energetic jet and large missing transverse energy. No significant deviation from the theory prediction is observed. Exclusion limits are derived on parameters of different signal models and compared to the results of other experiments. Finally, the results of a simulation study on the potential of the analysis at sqrt{s}=14 TeV are presented.

Numerical analysis of the relation between interactions and structure in a molecular fluid

Coarse graining is a popular technique used in physics to speed up the computer simulation of molecular fluids. An essential part of this technique is a method that solves the inverse problem of determining the interaction potential or its parameters from the given structural data. Due to discrepancies between model and reality, the potential is not unique, such that stability of such method and its convergence to a meaningful solution are issues.rnrnIn this work, we investigate empirically whether coarse graining can be improved by applying the theory of inverse problems from applied mathematics. In particular, we use the singular value analysis to reveal the weak interaction parameters, that have a negligible influence on the structure of the fluid and which cause non-uniqueness of the solution. Further, we apply a regularizing Levenberg-Marquardt method, which is stable against the mentioned discrepancies. Then, we compare it to the existing physical methods - the Iterative Boltzmann Inversion and the Inverse Monte Carlo method, which are fast and well adapted to the problem, but sometimes have convergence problems.rnrnFrom analysis of the Iterative Boltzmann Inversion, we elaborate a meaningful approximation of the structure and use it to derive a modification of the Levenberg-Marquardt method. We engage the latter for reconstruction of the interaction parameters from experimental data for liquid argon and nitrogen. We show that the modified method is stable, convergent and fast. Further, the singular value analysis of the structure and its approximation allows to determine the crucial interaction parameters, that is, to simplify the modeling of interactions. Therefore, our results build a rigorous bridge between the inverse problem from physics and the powerful solution tools from mathematics. rn

Analysis of retrieved shoulder prostheses

In the last years the number of shoulder arthroplasties has been increasing. Simultaneously the study of their shape, size and strength and the reasons that bring to a possible early explantation have not yet been examined in detail. The research carried out directly on explants is practically nonexistent, this means a poor understanding of the mechanisms leading the patient and so the surgeon, to their removal. The analysis of the mechanisms which are the cause of instability, dislocation, broken, fracture, etc, may lead to a change in the structure or design of the shoulder prostheses and lengthen the life of the implant in situ. The idea was to analyze 22 explants through three methods in order to find roughness, corrosion and surface wear. In the first method, the humeral heads and/or the glenospheres were examined with the interferometer, a machine that through electromagnetic waves gives information about the roughness of the surfaces under examination. The output of the device was a total profile containing both roughness and information on the waves (representing the spatial waves most characteristic on the surface). The most important value is called "roughness average" and brings the average value of the peaks found in the local defects of the surfaces. It was found that 42% of the prostheses had considerable peak values in the area where the damage was caused by the implant and not only by external events, such as possibly the surgeon's hand. One of the problems of interest in the use of metallic biomaterials is their resistance to corrosion. The clinical significance of the degradation of metal implants has been the purpose of the second method; the interaction between human body and metal components is critical to understand how and why they arrive to corrosion. The percentage of damage in the joints of the prosthetic components has been calculated via high resolution photos and the software ImageJ. The 40% and 50% of the area appeared to have scratches or multiple lines due to mechanical artifacts. The third method of analysis has been made through the use of electron microscopy to quantify the wear surface in polyethylene components. Different joint movements correspond to different mechanisms of damage, which were imprinted in the parts of polyethylene examined. The most affected area was located mainly in the side edges. The results could help the manufacturers to modify the design of the prostheses and thus reduce the number of explants. It could also help surgeons in choosing the model of the prosthesis to be implanted in the patient.

Sacral neuromodulation for neurogenic lower urinary tract dysfunction: systematic review and meta-analysis

Context Treatment of neurogenic lower urinary tract dysfunction (LUTD) is a challenge, because conventional therapies often fail. Sacral neuromodulation (SNM) has become a well-established therapy for refractory non-neurogenic LUTD, but its value in patients with a neurologic cause is unclear. Objective To assess the efficacy and safety of SNM for neurogenic LUTD. Evidence acquisition Studies were identified by electronic search of PubMed, EMBASE, and ScienceDirect (on 15 April 2010) and hand search of reference lists and review articles. SNM articles were included if they reported on efficacy and/or safety of tested and/or permanently implanted patients suffering from neurogenic LUTD. Two reviewers independently selected studies and extracted data. Study estimates were pooled using Bayesian random-effects meta-analysis. Evidence synthesis Of the 26 independent studies (357 patients) included, the evidence level ranged from 2b to 4 according to the Oxford Centre for Evidence-Based Medicine. Half (n = 13) of the included studies reported data on both test phase and permanent SNM; the remaining studies were confined to test phase (n = 4) or permanent SNM (n = 9). The pooled success rate was 68% for the test phase (95% credibility interval [CrI], 50–87) and 92% (95% CrI, 81–98%) for permanent SNM, with a mean follow-up of 26 mo. The pooled adverse event rate was 0% (95% CrI, 0–2%) for the test phase and 24% (95% CrI, 6–48%) for permanent SNM. Conclusions There is evidence indicating that SNM may be effective and safe for the treatment of patients with neurogenic LUTD. However, the number of investigated patients is low with high between-study heterogeneity, and there is a lack of randomised, controlled trials. Thus, well-designed, adequately powered studies are urgently needed before more widespread use of SNM for neurogenic LUTD can be recommended.