若尔盖湿地公路对两栖类的生态影响

本文考察了若尔盖高寒泥炭湿地公路对高原林蛙（Rana kukunoris）、倭蛙（Narorana pleskei）和岷山蟾蜍（Bufo minshanicus）的生态影响。分析了公路对两栖动物空间分布和栖息地利用的影响，并用IBM模型探讨其可能作用机制，考察了两栖动物公路死亡的季节差异及影响公路死亡空间分布的景观因素。最后通过对若尔盖高寒湿地两栖动物陆地核心栖息地的分析，为若尔盖路域栖息地的管理提供依据。 1. 对公路周边6个沼泽水凼群进行了调查，每个样地设置5条样线（距离公路10m、20m、50m、100m和150m）。调查表明，在繁殖季节(5月)，距离公路距离对高原林蛙和倭蛙的相对数量都有显著作用，其效应明显大于其他各项栖息地环境参数。公路导致高原林蛙和倭蛙在公路周边种群密度降低，其相对数量从距离公路100m处到公路边缘一直呈现逐渐降低的趋势。在繁殖季节，若尔盖高寒湿地的公路生态影响域大约在100-150m之间，这一距离远远大于森林栖息地中公路对两栖类的生态影响域（35-40 m）。 在繁殖后期（9月），对公路周边16个草地样点的样线调查表明，公路对周边高原林蛙和倭蛙密度分布并未造成显著影响。 2. 二次模型的拟合表明繁殖季节高原林蛙和倭蛙在公路周边的密度分布符合钟型曲线。前人对森林公路两侧两栖类分布的研究也显示了类似的规律。我们通过基于个体的模型，模拟在了公路边缘100单位距离内的栖息地空间，栖息地环境质量呈梯度变化，动物个体在其中通过随机运动寻找适宜的栖息地。拟合结果表明，动物个体仅仅依照简单的运动规则寻找适宜栖息地，这种活动就可以导致公路周边栖息地中的动物分布曲线出现3个局部峰。公路周边两栖动物的钟型分布曲线可能仅仅是个体寻找适宜栖息地过程中出现的临时性群体分布模式。 3. 在若尔盖高寒湿地，公路交通造成了大量两栖类死亡。但是公路两栖类动物死亡的季节分布很不均匀：5月、8月和9月死亡数量很高，而7月和10月死亡数量却很低。这种季节性差异和两栖类各个生活史阶段的迁移运动有密切的关系。利用景观参数的逻辑斯蒂回归模型显示，距离公路1000-2000m范围内的湿草地比例对三种两栖类公路死亡概率均有很强的贡献。湿草地这一栖息地类型分类中有大量的沼泽水体，是两栖类重要的繁殖点和取食点。两栖类公路死亡概率湿草地的关系从一个侧面表明，要维持一个区域较高的两栖类种群数量，需要1000-2000m半径范围内存在大面积的湿草地。 4. 高原林蛙和岷山蟾蜍不同性别和年龄个体分布点的水体距离存在显著差异。不同种类、年龄的两栖类分布点距离水体距离的差异可能是由于对水体的依赖性造成的。而相同种类、年龄段的个体中，高原林蛙雌性、岷山蟾蜍亚成体和雌性的体重与分布点距水体距离有显著负相关，这可能是因为体重更大的个体对水体的依赖性更弱。考虑到过大的陆地核心栖息地面积在实际保护工作中存在操作上的困难，因此我们认为可以以水体周边90%个体的分布区为低限确定3种两栖类的最小陆地核心栖息地。但是，在同样的水体距离-两栖类密度分布格局下，水体的面积和分形参数对最小陆地核心栖息地半径的确定有一定影响。 Ecological effects of alpine wetland road on Rana kukunoris, Narorana pleskei, Bufo minshanicus was studied in Zoige wetland. The effects of road on distribution of amphibians and its possible underline mechanism was discussed based on empirical data and computer simulation. Road killed amphibians was surveyed in different season and those landscape factor which could have impact on road killing distribution was analyses. Core terrestrial habitat of amphibians in Zoige wetland was discussed in the consideration of conservation management. 1. Six pool groups was investigated in breeding season (May) of R. kukunoris, N. pleskei. Five transects at distance of 10m, 20m, 50m, 100m and 150m from road edge was surveyed in each pool groups. There was a significant effects of distance from road edge on relative counts of R. kukunoris, N. pleskei, which is much important than effects of other environmental factors. Road caused the density of R. kukunoris, N. pleskei decreased from distance of 100m from road to 10m from road. Road ecological effect zone of alpine wetland for amphibians is about 100-150m. It is much wider than those of forest roads, which is about 35-40m. However, studies on 16 grassland near road showed no significant effect of road on amphibians after breeding season (Sep.). 2. Quadratic model fit indicated that the distribution of R. kukunoris and N. Pleskei followed a hump like curve. Previous studies on forest road showed similar results. A 100×100 habitat with gradual environment besides road was simulated with a individual-based model, and animal seek for suitable habitat with stochastic locomotion in it. Simulation results indicated that 3 density peak of animal distribution can emergent followed a simply rules. The hump like density cure could be a temporal swarm pattern during the process of individual seeking for habitat. 3. Road traffic caused mass death of amphibians in Zoige wetland. There was much road killed amphibians in May, Aug and Sep than those in July and Oct. The fluctuation of road kill could be related with migration of amphibians between seasons. Logistic regression of landscape variables indicated that wet grassland in 1000-2000m is essential to predict the probability of road kill. Wet grassland is an important breeding and forage habitat for amphibians. It also indicated that mass wet grassland in 1000-2000m is essential for maintain a big amphibian population. 4. There was significant differences among distance from aquatic site of subadults, female and males of R. kukunoris and B. Minshanicus. Possibly, it was because of their dependence on water. There was a significant negative relationship between distance from aquatic site and individuals body mass. Estimates of core habitat that are too large may make it difficult to establish protective regulations. The smallest suitable terrestrial core habitats were defined as the terrestrial habitats used during migration to and from the wetlands, and for foraging by 90% of any life stage (adults, and subadults) in a season. However, even with the same amphibian distribution pattern along the distance from aquatic sites, the radii of smallest suitable terrestrial core habitats will be varied with the fractal parameters of aquatic site.

Drift distance survey in direct plasma injection scheme for high current beam production

In a laser ion source, plasma drift distance is one of the most important design parameters. Ion current density and beam pulse width are defined by plasma drift distance between a laser target and beam extraction position. In direct plasma injection scheme, which uses a laser ion source and a radio frequency quadrupole linac, we can apply relatively higher electric field at beam extraction due to the unique shape of a positively biased electrode. However, when we aim at very high current acceleration such as several tens of milliamperes, we observed mismatched beam extraction conditions. We tested three different ion current at ion extraction region by changing plasma drift distance to study better extraction condition. In this experiment, C6+ beam was accelerated. We confirmed that matching condition can be improved by controlling plasma drift distance.

Relationship between the continually expanded interlayer distance of layered silicates and excess intercalation of cationic surfactants

Excess intercalation of cationic surfactants into Na-montmorillonites (MMTs) was investigated in organically modified silicates (OMSs), synthesized with MMTs and octadecylammonium chloride (OAC) by systematically varying the surfactant loading level from 0.625 to 1, 1.25, 1.56, 2, and 2.5 with respect to the cation exchange capacity (CEC) of MMTs. Wide-angle X-ray diffraction and thermogravimetric analysis results indicated that the continuous increase of interlayer distances came from the entering of surfactants into the interlayer of MMTs. Excess surfactants were extracted with a Soxhlet apparatus, which showed two kinds of intercalation states of surfactants in the interlayer when the surfactant loading level was beyond the CEC. Fourier transform infrared spectroscopy and differential scanning calorimetry were used to explore the microstructures of OMSs. It was found that the surfactants arranged more orderly as the loading level increased and the excess surfactants piled up in the interlayer together with counterions, forming a sandwiched surfactant layer. On the basis of the results, the layer structures of OMSs and the mechanism by which the surfactants entered the interlayer were expounded: surfactant cations entered the interlayer through cation exchange reactions and were tightly attracted to the silicate platelet surfaces when the surfactant loading level was below the CEC;

Brittle-tough transition in PP/EPDM blends: effects of interparticle distance and tensile deformation speed

The toughness of polypropylene (PP)/ethylene-propylene-diene monomer rubber (EPDM) blends containing various EPDM contents as a function of the tensile speed was studied. The toughness of the blends was determined from the tensile fracture energy of the side-edge notched samples. A sharp brittle-tough transition was observed in the fracture energy versus interparticle distance (ID) curves when the crosshead speed < 102.4 mm/min. It was observed that the brittle-ductile transition of PP/EPDM blend occurred either by reducing ID or by decreasing the tensile speed. The correlation between the critical interparticle distance and tensile deformation rate was compared with that between the critical interparticle distance and temperature for PP/EPDM blends. (C) 2000 Elsevier Science Ltd. All rights reserved.

Brittle-ductile transition in high-density polyethylene/glass-bead blends: Effects of interparticle distance and temperature

The toughness of high-density polyethylene (HDPE)/glass-bead blends containing various glass-bead contents as a function of temperature was studied. The toughness of the blends was determined from the notch Izod impact test. A sharp brittle-ductile transition was observed in impact strength-interparticle distance (ID) curves at various temperatures. The brittle-ductile transition of HDPE/glass-bead blends occurred either with reduced ID or with increased temperature. The results indicated that the brittle-ductile-transition temperature dropped markedly with increasing glass-bead content. Moreover, the correlation between the critical interparticle distance (ID.) and temperature was obtained. Similar to the ID, of polymer blends with elastomers, the ID, nonlinearly increased with increasing temperature. However, this was the first observation of the variation of the ID, with temperature for polymer blends with rigid particles. (C) 2001 John Wiley & Sons, Inc. J Polym. Sci Part B: Polym. Phys 39: 1855-1859, 2001.

Atom space distance and computing of molecular similarity

A mathematical model on computation of molecular similarity was suggested, The algorithmic techniques for measuring the degree of similarity between pairs of three-dimensional chemical molecules was represented by modified interatomic distance matrices. Current work was carried out on Indigo 2 work station with Sybyl software. Four groups of molecules were used to compute the molecules similarity to testing the mathematical model with satisfactory results.

Effect of polymer chain structure and chain distance on luminescent efficiency

Three kinds of PPV-based copolymers were synthesized and characterized. Their luminescent properties were investigated and discussed by PL spectrum, and time-dependence luminescent spectrum in film and solution stare. The results show that in the range of our study, the PL intensity and lifetime of luminescent decay increase with the increasing length of flexible segments and the solution diluting, indicating the tendency of the increase of luminescent efficiency.

Interparticle distance-temperature-strain rate equivalence for the brittle-tough transition in polymer blends

From the angle of energy transformation an equation was obtained for the brittle transition in polymer blends. The effects of interparticle distance, temperature and strain rate on the brittle-tough transition in polymer blends were characterized by this equation. The calculations show that, for this transition: (1) increasing temperature and decreasing interparticle distance are equivalent and the shift factor increases with increasing temperature; (2) decreasing strain rate and decreasing interparticle distance have equivalent effects on the transition; (3) the strain rate must be optimum in order to find the brittle-tough transition phenomena for a given temperature region. (C) 1998 Published by Elsevier Science Ltd. All rights reserved.