Residual stress influence on fatigue lifetimes of electroplated AISI 4340 high strength steel

Residual stresses play an important role in the fatigue lives of structural engineering components. In the case of near surface tensile residual stresses, the initiation and propagation phases of fatigue process are accelerated; on the other hand, compressive residual stresses close to the surface may increase fatigue life. In both decorative and functional applications, chromium electroplating results in excellent wear and corrosion resistance. However, it is well known that it reduces the fatigue strength of a component. This is due to high tensile internal stresses and microcrack density. Efforts to improve hard chromium properties have increased in recent years. In this study, the effect of a nickel layer sulphamate process, as simple layer and interlayer, on fatigue strength of hard chromium electroplated AISI 4340 steel hardness - HRc 53, was analysed. The analysis was performed by rotating bending fatigue tests on AISI 4340 steel specimens with the following experimental groups: base material, hard chromium electroplated, sulphamate nickel electroplated, sulphamate nickel interlayer on hard chromium electroplated and electroless nickel interlayer on hard chromium electroplated. Results showed a decrease in fatigue strength in coated specimens and that both nickel plating interlayers were responsible for the increase in fatigue life of AISI 4340 chromium electroplated steel. The shot peening pre-treatment was efficient in reducing fatigue loss in the alternatives studied.

An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel

Shot peening is a method widely used to improve the fatigue strength of materials. through the creation of a compressive residual stress field (CRSF) in their surface layers. In the present research the gain in fatigue life of AISI 4340 steel, Used in landing gear. is evaluated under four Shot peening conditions. Rotating bending fatigue tests were conducted and the CRSF was measured by an X-ray tensometry prior and during fatigue tests. It was observed that relaxation of the CRSF occurred due to the fatigue process. In addition, the fractured fatigue specimens were investigated using a scanning electron microscope in order to obtain information about the crack initiation points. The evaluation of fatigue life, relaxation of CRSF and crack sources are discussed. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Extração e análise da fração lipídica da microalga monoraphidium sp., síntese e caracterização do seu biodiesel

The cultivation of microalgae biomass in order to produce biodiesel arises as an extremely promising aspect, in that the microalgae culture includes short cycle of reproduction, smaller areas for planting and residual biomass rich in protein content. The present dissertation evaluates the performance and features, through spectrometry in the region of infrared with transformed Fourier (FTIR) and spectrometry in the region of UVvisible (UV-Vis), of the extracted lipid material (LM) using different techniques of cell wall disruption (mechanical agitation at low and at high spin and agitation associated with cavitation). The technique of gas chromatography (GC) brought to light the success of alkaline transesterification in the conversion of oil into methyl monoesters (MME), which was also analyzed by spectroscopic techniques (FTIR, proton magnetic resonance (1H NMR) and carbon (13C NMR). Through thermogravimetric analysis (TGA) were analyzed the lipid material (LM), biodiesel and the microalgae biomass. The method which provided the best results concerning the efficiency in extraction of the LP of Monoraphidium sp. (12,51%) was by mechanical agitation at high spin (14 000 rpm), for 2 hours being the ideal time, as shown by the t test. The spectroscopic techniques (1H NMR, 13C NMR and FTIR) confirmed that the structure of methyl monoesters and the chromatographic data (CG) revealed a high content of saturated fatty acid esters (about 70%) being the major constituent eicosanoic acid (33,7%), which justifies the high thermal stability of microalgae biodiesel. The TGA also ratified the conversion rate (96%) of LM into MME, pointing out the quantitative results compatible with the values obtained through GC (about 98%) and confirmed the efficiency of the extraction methods used, showing that may be a good technique to confirm the extraction of these materials. The content of LM microalgae obtained (12,51%) indicates good potential for using such material as a raw material for biodiesel production, when compared to oil content which can be obtained from traditional oil for this use, since the productivity of microalgae per hectare is much larger and requires an extremely reduced period to renew its cultivation

Utilização do nitrogênio (15N) residual de coberturas de solo e da uréia pela cultura do milho

Geralmente, grande parte do N de fertilizantes minerais e de plantas de cobertura de solo não é aproveitada pelo milho no cultivo imediato à aplicação, o qual pode ser absorvido pelas culturas cultivadas subseqüentemente. O objetivo deste trabalho foi avaliar o aproveitamento pelo milho do N residual da uréia, da crotalária (Crotalaria juncea) e do milheto (Pennisetum americanum) marcados com 15N, aplicados ao milho cultivado em sistema plantio direto, no ano agrícola anterior, num Latossolo Vermelho distroférrico no Cerrado. O estudo foi desenvolvido na fazenda experimental da Faculdade de Engenharia de Ilha Solteira-UNESP, Selvíria (MS), em áreas distintas. O delineamento experimental foi de blocos ao acaso com 15 tratamentos e quatro repetições, aplicados ao milho em 2001/02 e 2002/03. Os tratamentos foram dispostos em esquema fatorial 3 x 5, compreendendo a combinação de três coberturas de solo: crotalária juncea, milheto e vegetação espontânea (pousio), e cinco doses de N-uréia: 0, 30, 80, 130 e 180 kg ha-1. Após a colheita do milho, as duas áreas permaneceram em pousio nas entressafras e, em seguida, cultivadas novamente com milho, safras 2002/03 (experimento 1) e 2003/04 (experimento 2), utilizando adubação similar em todas as parcelas, para distinguir o efeito do N residual. O aproveitamento médio do N residual da parte aérea do milheto e da crotalária pelo milho foi inferior a 3,5 e 3 %, respectivamente, da quantidade inicial. A quantidade de N residual da uréia absorvida pelo milho aumentou de forma quadrática, no experimento 1, e linear, no experimento 2, em relação à dose de N aplicada, sendo o aproveitamento desta inferior a 3 %. As coberturas de solo não influenciaram o aproveitamento pelo milho do N residual da uréia, e vice-versa.

Efeito residual da escória de siderurgia como corretivo de acidez do solo na soqueira de cana-de-açúcar

A escória de siderurgia, como material corretivo e efeito residual prolongado, pode beneficiar culturas de ciclo longo, a exemplo da cana-de-açúcar, minimizando a queda de produção ao longo do ciclo produtivo. Este trabalho objetivou avaliar diferentes níveis de saturação por bases, utilizando, como corretivo do solo, a escória de siderurgia, comparando-a com calcário calcítico, nas alterações de alguns atributos químicos do solo, bem como na resposta da soqueira da cana-de-açúcar. Para isto, realizou-se um experimento com a variedade SP 80-1842, durante o terceiro e o quarto corte, nos anos agrícolas 2000/01 e 2001/02. Os tratamentos, dispostos em blocos casualizados, em esquema fatorial com quatro repetições, constaram de duas fontes de corretivos, calcário calcítico e escória de siderurgia, e quatro níveis de correção, estimados pelo método da saturação por bases (V %): testemunha (sem correção) e com correção para V % de 50; 75 e 100, tendo sido tais corretivos aplicados na época do plantio da cana-de-açúcar. O calcário calcítico e a escória de siderurgia promoveram efeito residual benéfico, após 48 meses da aplicação, na correção da acidez do solo e na elevação do valor da saturação por bases; a maior dose de calcário causou efeito depressivo no perfilhamento, no número de colmos industrializáveis e na produção da cana-de-açúcar, fato não observado com uso da escória de siderurgia; a aplicação da escória de siderurgia e do calcário, em pré-plantio, promoveu efeito residual positivo na produção da soqueira de cana-de-açúcar.

Performance and color of broilers fed diets containing Rhodocyclus gelatinosus biomass

The objective of this study was to evaluate the effect of different supplementation levels of Rhodocyclus gelatinosus biomass on the performance and pigmentation of broilers. Cobb broilers were raised in pens and were fed a sorghum-based diet until 35 days of age. At the 36th day of age, ninety-six birds were randomly distributed to four treatments consisting of experimental diets with different supplementation levels of Rhodocyclus gelatinosus biomass (0, 75, 150 and 300 ppm) added to the finisher basal diet, which were given for seven days. A completely randomized experimental design was used, with four treatments, four replicates and six broilers per parcel. Birds and diets were weighed at the 36th and at the 42nd day of age for performance analysis. There was no significant effect on broiler feed intake. Significant differences in weight gain and feed conversion were seen between the control group and the groups supplemented with 75 and 150 ppm. The treatment with the highest supplementation level and the control group had best weight gain and feed conversion. Color analysis showed that R. gelatinosus biomass supplementation resulted in more yellow breast skin and increased darkening and color purity in breast and thigh meat of broilers, but had no effect on lightness or color purity of breast and thigh skins.

Development and application of methods for determination of residual monomer in dental acrylic resins using high performance liquid chromatography

Two high-performance liquid chromatographic methods for determination of residual monomer in dental acrylic resins are described. Monomers were detected by their UV absorbance at 230 nm, on a Nucleosil((R)) C-18 (5 mu m particle size, 100 angstrom pore size, 15 x 0.46 cm i.d.) column. The separation was performed using acetonitrile-water (55:45 v/v) containing 0.01% triethylamine (TEA) for methyl methacrylate and butyl methacrylate, and acetonitrile-water (60:40 v/v) containing 0.01% TEA for isobutyl methacrylate and 1,6-hexanediol dimethacrylate as mobile phases, at a flow rate of 0.8 mL/min. Good linear relationships were obtained in the concentration range 5.0-80.0 mu g/mL for methyl methacrylate, 10.0-160.0 mu g/mL for butyl methacrylate, 50.0-500.0 mu g/mL for isobutyl methacrylate and 2.5-180.0 mu g/mL for 1,6-hexanediol dimethacrylate. Adequate assay for intra- and inter-day precision and accuracy was observed during the validation process. An extraction procedure to remove residual monomer from the acrylic resins was also established. Residual monomer was obtained from broken specimens of acrylic disks using methanol as extraction solvent for 2 h in an ice-bath. The developed methods and the extraction procedure were applied to dental acrylic resins, tested with or without post-polymerization treatments, and proved to be accurate and precise for the determination of residual monomer content of the materials evaluated. Copyright (c) 2005 John Wiley & Sons, Ltd.

Effect of water-bath post-polymerization on the mechanical properties, degree of conversion, and leaching of residual compounds of hard chairside reline resins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Seasonal variation of biomass and productivity of the periphytic community on artificial substrata in the Jurumirim Reservoir (São Paulo, Brazil)

The seasonal variation of the periphytic community attached to an artificial substratum (glass tubes) was studied during two different periods in a lagoon connected to the Paranapanema River, the main tributary of the Jurumirim Reservoir (São Paulo-Brazil). An analysis of dry weight, ash free dry weight, chlorophyll a, phaeophytin and primary productivity of periphyton was carried out. The first experiment lasted from August to December 1993, the second from February to June 1994. Tubes were removed after 7, 14, 21, 28, 60, 90 and 119 days of incubation. In the 1st experiment, the periphytic community reached a higher biomass after the 4th week of colonization (28th day), in the 2nd experiment after the 2nd week (14th day). This discrepancy is related to seasonal differences in environmental factors (water temperature, nutrients concentrations and water discharge) that determine initial colonization. After the first stages of colonization, the biomass and primary productivity of periphyton reached their maximum values after the 60th day of incubation. In both experiments, three developmental phases could be discerned. In the initial phase, an exponential growth was observed. In the second phase, the bioderm reached its maximum biomass and productivity. In the third phase, a decrease of biomass and productivity occurred.

Rotifer abundance, biomass, and secondary production after the recovery of hydrologic connectivity between a river and two marginal lakes (São Paulo, Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of culture conditions on the biomass determination by ergosterol of Lentinus crinitus and Psilocybe castanella

Estimating fungal growth is important in processes of soil bioremediation. It has been demonstrated that ergosterol is a good indicator of fungal biomass in solid substrata. In the present study were evaluated the effects upon the ergosterol rate of Lentinus crinitus Berk. and Psilocybe castanella Peck through the culture conditions of these fungi, which are evaluated for the bioremediation of soils contaminated by organochlorates. A good correlation between fungal biomass and ergosterol was observed for both species. The culture conditions did not influence the ergosterol rate of L. crinitus. Yet the ergosterol rate of P. castanella was influenced from 35 days of culture and when grown in the presence of 15.00 g hexachlorobenzene l(-1) of culture medium. So it is possible to estimate growth of both species using ergosterol as indicator in processes of soil bioremediation since the influences observed in the ergosterol rate of P. castanella are considered.

Variation in liana abundance and biomass along an elevational gradient in the tropical Atlantic Forest (Brazil)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modeling the spatial and temporal heterogeneity of deforestation-driven carbon emissions: the INPE-EM framework applied to the Brazilian Amazon

We present a generic spatially explicit modeling framework to estimate carbon emissions from deforestation (INPE-EM). The framework incorporates the temporal dynamics related to the deforestation process and accounts for the biophysical and socioeconomic heterogeneity of the region under study. We build an emission model for the Brazilian Amazon combining annual maps of new clearings, four maps of biomass, and a set of alternative parameters based on the recent literature. The most important results are as follows: (a) Using different biomass maps leads to large differences in estimates of emission; for the entire region of the Brazilian Amazon in the last decade, emission estimates of primary forest deforestation range from 0.21 to 0.26 similar to Pg similar to C similar to yr-1. (b) Secondary vegetation growth presents a small impact on emission balance because of the short duration of secondary vegetation. In average, the balance is only 5% smaller than the primary forest deforestation emissions. (c) Deforestation rates decreased significantly in the Brazilian Amazon in recent years, from 27 similar to Mkm2 in 2004 to 7 similar to Mkm2 in 2010. INPE-EM process-based estimates reflect this decrease even though the agricultural frontier is moving to areas of higher biomass. The decrease is slower than a non-process instantaneous model would estimate as it considers residual emissions (slash, wood products, and secondary vegetation). The average balance, considering all biomass, decreases from 0.28 in 2004 to 0.15 similar to Pg similar to C similar to yr-1 in 2009; the non-process model estimates a decrease from 0.33 to 0.10 similar to Pg similar to C similar to yr-1. We conclude that the INPE-EM is a powerful tool for representing deforestation-driven carbon emissions. Biomass estimates are still the largest source of uncertainty in the effective use of this type of model for informing mechanisms such as REDD+. The results also indicate that efforts to reduce emissions should focus not only on controlling primary forest deforestation but also on creating incentives for the restoration of secondary forests.

Levels of persistent organic pollutants and residual pattern of DDTs in small cetaceans from the coast of São Paulo, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Experimental aspects of biomass fuels in a bubbling fluidized bed combustor

This work presents experimental information relevant to the combustion of biomass in a bubbling fluidized bed. The biomass distribution in a fluidized bed was studied through tests performed in a cold bed, while the volatiles released in the biomass pyrolysis, the burning rate of the resulting charcoal, and the combustion control regime, were studied through tests performed in a high temperature bed.Visual examination of photographs taken from a transparent walls bed, with a rectangular cross-section, showed that the large fuel particles, typical of biomass processing, were distributed in the bubbles, in the splash zone, and in the emulsion phase. The occurrence of biomass in the emulsion phase was favored by burning biomass particles of greater density and smaller size-expetimentally determined in each case. Decreasing the fuel particle size improved the biomass distribution inside the bed. The same was accomplished by increasing the superficial gas velocity as high as possible, compatibly with the acceptable elutriation.Burning tests showed that the biomass fuels have the advantage of reaching the diffusional regime at temperatures that can be lower than 1000 K, which ensures that the biomass fuels burn in a stable regime. (C) 2007 Elsevier B.V. All rights reserved.