Magnetization reversal of ferromagnetic nanowires studied by magnetic force microscopy

The magnetization reversal of two-dimensional arrays of parallel ferromagnetic Fe nanowires embedded in nanoporous alumina templates has been studied. By combining bulk magnetization measurements (superconducting quantum interference device magnetometry) with field-dependent magnetic force microscopy (MFM), we have been able to decompose the macroscopic hysteresis loop in terms of the irreversible magnetic responses of individual nanowires. The latter are found to behave as monodomain ferromagnetic needles, with hysteresis loops displaced (asymmetric) as a consequence of the strong dipolar interactions between them. The application of field-dependent MFM provides a microscopic method to obtain the hysteresis curve of the array, by simply registering the fraction of up and down magnetized wires as a function of applied field. The observed deviations from the rectangular shape of the macroscopic hysteresis loop of the array can be ascribed to the spatial variation of the dipolar field through the inhomogeneously filled membrane. The system studied proves to be an excellent example of the two-dimensional classical Preisach model, well known from the field of hysteresis modeling and micromagnetism.

Shape Effect of Electrochemical Chloride Extraction in Structural Reinforced Concrete Elements Using a New Cement-Based Anodic System

This article shows the research carried out by the authors focused on how the shape of structural reinforced concrete elements treated with electrochemical chloride extraction can affect the efficiency of this process. Assuming the current use of different anode systems, the present study considers the comparison of results between conventional anodes based on Ti-RuO2 wire mesh and a cement-based anodic system such as a paste of graphite-cement. Reinforced concrete elements of a meter length were molded to serve as laboratory specimens, to closely represent authentic structural supports, with circular and rectangular sections. Results confirm almost equal performances for both types of anode systems when electrochemical chloride extraction is applied to isotropic structural elements. In the case of anisotropic ones, such as rectangular sections with no uniformly distributed rebar, differences in electrical flow density were detected during the treatment. Those differences were more extreme for Ti-RuO2 mesh anode system. This particular shape effect is evidenced by obtaining the efficiencies of electrochemical chloride extraction in different points of specimens.

Reuse of Spanish civil war air-raid shelters in Alicante: the R46 Balmis and R31 Seneca shelter

More than a hundred public air-raid shelters were constructed beneath Alicante during the Spanish Civil war. Their architectural uniqueness and humanitarian purpose render these shelters a tangible testament to our recent history. The Alicante Municipal Archives hold reports written by technicians who inspected the shelters in the 1940s, which were subsequently included in the Special Plan for public shelters in 1953. Half a century later, in 2003, information on the air-raid shelters was included in another Special Plan aimed at protecting Alicante’s archaeological heritage. Thanks to the work of the Municipal Heritage Conservation unit (COPHIAM) and the Special Protection Plan for Urban Archaeology (PEPA), the exact or approximate locations were identified for almost 90% of the shelters known to have existed. This paper describes interventions in two of these architectural spaces using advanced museology techniques. The first concerns air-raid shelter R46, located in the Plaza del Dr. Balmis in the city centre. This was built in 1938, and is rectangular with two entrances. The second is air-raid shelter R31, located in the Plaza Séneca.

I. Embroidered pocketbook, 1774

This series contains one rectangular, embroidered pocketbook with foldover flaps embroidered with wool thread in green, red, blue, purple, and cream colors. The interior is lined with pink silk and has cardboard inserts. "FISHER AMES 1774" is embroidered on one of the interior flaps of the wallet. This object was most likely made for Fisher Ames by a female member of his family or a friend, possibly to commemorate his graduation from Harvard in 1774. A child’s leather glove that was inserted in one of the pockets is also housed in HUM 96 Box 1.

Fault development and interaction in distributed strike-slip shear zones: an experimental approach

Analogue model experiments using both brittle and viscous materials were performed to investigate the development and interaction of strike-slip faults in zones of distributed shear deformation. At low strain, bulk dextral shear deformation of an initial rectangular model is dominantly accommodated by left-stepping, en echelon strike-slip faults (Riedel shears, R) that form in response to the regional (bulk) stress field. Push-up zones form in the area of interaction between adjacent left-stepping Riedel shears. In cross sections, faults bounding push-up zones have an arcuate shape or merge at depth. Adjacent left-stepping R shears merge by sideways propagation or link by short synthetic shears that strike subparallel to the bulk shear direction. Coalescence of en echelon R shears results in major, through-going faults zones (master faults). Several parallel master faults develop due to the distributed nature of deformation. Spacing between master faults is related to the thickness of the brittle layers overlying the basal viscous layer. Master faults control to a large extent the subsequent fault pattern. With increasing strain, relatively short antithetic and synthetic faults develop mostly between old, but still active master faults. The orientation and evolution of the new faults indicate local modifications of the stress field. In experiments lacking lateral borders, closely spaced parallel antithetic faults (cross faults) define blocks that undergo clockwise rotation about a vertical axis with continuing deformation. Fault development and fault interaction at different stages of shear strain in our models show similarities with natural examples that have undergone distributed shear.

(Table 2) Presence of plant remains in sediment core GIK14973, northern Kattegat

For the first time detailed physical properties were measured in addition to sedimentological parameters of near surface sediments of Kattegat channel system. This study has been accomplished on two sediment cores of different waterdepth of each Alkor-deep and Littorina-deep. The sediments of Littorina-deep, which have been dated with 210Pb-method, turned out to be surprisingly recent, with sedimentation rates up to 3,2 cm/year. Differences in physical properties lead to the assumption of lower sedimentation rates in Alkor-deep, the velocities of bottom and deepwater currents could be the cause of these differences in sedimentation rates. In Alkor-deep, the morphology runs parallel to the main direction of the bottom current. Therefore higher current velocities can be reached, which favor the erosion of fine sediment particles. Littorina-deep is located rectangular to the main direction of bottom currents. This might lead to an 'overflow' situation instead of a 'flow through'.

[Calligraphic specimen, 1206, i.e. 1791 or 1792].

Exquisite album of calligraphy (muraqqaʻ / murakkaa) employing ḥadīth of the Prophet executed by the celebrated Ottoman calligrapher Mahmud Celâleddin Efendi (d.1829) in imitation of a model executed by the master calligrapher Hafız Osman Efendi (d.1698).

[Calligraphic specimen, early to mid 18th century].

Exquisite album of calligraphy (muraqqaʻ or murakkaa) comprising kıt'alar employing ḥadīth of the Prophet executed by the celebrated Ottoman calligrapher Eğrikapılı Mehmet Râsim Efendi (d.1756), renowned student of Seyyid Abdullah of Yedikule (d.1731).

[al-Kawākib al-durrīyah fī madḥ khayr al-barīyah, 16th century?].

Fine copy of al-Būṣīrī's poem in praise of the Prophet accompanied by elucidation in Persian and Turkish.

Coupled waveguide excitation of traveling wave slot antennas /

"Contract No. AF33(616)-3220 Project No. 6(7-4600) Task 40572 Wright Air Development Center"

Icones Revelationvm S. Iohs. Evangeliste in Pathmo /

Engraved t.p. (93 x 76 mm.) and 24 scenes (ca. 85 x 78 mm.), each tipped onto the recto of its leaf by means of a tab at each corner. The scenes are in ovals set in rectangular frames. The scenes are numbered 1-24 above the frames. Below are four lines of Latin text, with the number of the chapter of Revelations being illustrated.

Astrographic catalogue 1900-0 Oxford section dec. +24⁰ to +32⁰: from photographs taken and measured at the University observatory, Oxford, under the direction of Herbert Hall Turner.

No more published?