Cracking and Seating to Retard Reflective Cracking - Hamilton County, HR-277, 1993

The crack and seat (C & S) method of rehabilitating concrete pavements has been proposed to reduce the incidence of reflective cracking in asphalt overlays. These cracked pieces help reduce the thermal effects on lateral joint movement while the seating of slab pieces reduces vertical movement. This 1986 project demonstrated that a 0.6 m x 0.9 m (2 ft x 3 ft) cracking pattern was optimal to retard reflective cracking in an asphalt overlay. The best performance among three C & S test sections was section 4 with a 0.6 m x 0.9 m (2 ft x 3 ft) cracking pattern and 7.6 cm (3 in) overlay. Structural ratings determined from the Road Rater™ indicated little difference between each C & S section with varying AC thicknesses and crack spacings. Although reflection cracking is reduced in the early years after construction, the effectiveness of the C & S method diminishes over time.

Estudi de la viabilitat econòmica de la implantació d'una planta de piròlisi per a la producció de biochar en un context local i comarcal

En aquest document es pretén estudiar de la viabilitat econòmica de la implantació d’una planta de piròlisi per a la producció de biochar o char en un context local i comarcal. La biomassa és una font d’energia que genera uns rendiments energètics prou interesants i d’una manera respectuosa amb el medi ambient. Així doncs, la teòrica planta utilitzarà biomassa que, a traves del tractament termoquímic de la piròlisi, ens generarà uns productes que són d’utilitat per l’obtenció d’energia d’una manera respectuosa amb el medi ambient. Abans de fer l’anàlisi econòmic, hi ha una explicació extensa dels processos termoquímics, com són la piròlisi, la gasificació i la torrefacció. Posteriorment, es du a terme una revisió de l’estat actual de les tecnologies de conversió de biomassa a Catalunya i finalment es realitza un inventari i anàlisi dels usos de la biomassa a Catalunya, en el qual es parla principalment de l’estella el pèl·let, així com també de la seva producció, consum i exportació. El nostre anàlisi econòmic de la planta de processament de biomassa es durà a terme a nivell local, és a dir en un municipi, i també a nivell comarcal a Catalunya. A partir del processament de biomassa per mitja de la piròlisi, obtindrem uns productes, entre els quals el biochar, que serà un dels productes finals per poder vendre. L’altre producte serà el pèl·let de biochar, que l’obtindrem a través del procés de pel·letització. Aquest procés ens permetrà densificar el mateix biochar i obtenir-ne pèl·lets amb un poder calorífic superior, com també el seu possible preu de venda final. En aquest anàlisi econòmic plantejarem diferents escenaris tant a nivell local com comarcal, és a dir, farem variar diferents paràmetres de la planta, com poden ser els dies, les hores de treball, el sou dels treballadors, l’existència de procés de pel·letització...per veure la viabilitat del nostre projecte. Aquesta viabilitat la mesurarem amb diferents Índexs, entre els quals hi ha l’Índex de Rendibilitat, que ens determinarà si el projecte és possible si el seu valor és més gran a 1.

Effects of 2 different prior endurance exercises on whole-body fat oxidation kinetics: light vs. heavy exercise.

This study aimed to compare the effects of 2 different prior endurance exercises on subsequent whole-body fat oxidation kinetics. Fifteen men performed 2 identical submaximal incremental tests (Incr2) on a cycle ergometer after (i) a ∼40-min submaximal incremental test (Incr1) followed by a 90-min continuous exercise performed at 50% of maximal aerobic power-output and a 1-h rest period (Heavy); and (ii) Incr1 followed by a 2.5-h rest period (Light). Fat oxidation was measured using indirect calorimetry and plotted as a function of exercise intensity during Incr1 and Incr2. A sinusoidal equation, including 3 independent variables (dilatation, symmetry and translation), was used to characterize the fat oxidation kinetics and to determine the intensity (Fat(max)) that elicited the maximal fat oxidation (MFO) during Incr. After the Heavy and Light trials, Fat(max), MFO, and fat oxidation rates were significantly greater during Incr2 than Incr1 (p < 0.001). However, Δ (i.e., Incr2-Incr1) Fat(max), MFO, and fat oxidation rates were greater in the Heavy compared with the Light trial (p < 0.05). The fat oxidation kinetics during Incr2(Heavy) showed a greater dilatation and rightward asymmetry than Incr1(Heavy), whereas only a greater dilatation was observed in Incr2(Light) (p < 0.05). This study showed that although to a lesser extent in the Light trial, both prior exercise sessions led to an increase in Fat(max), MFO, and absolute fat oxidation rates during Incr2, inducing significant changes in the shape of the fat oxidation kinetics.

IDSS Iowa Diseases Surveillance System: Security and Confidentiality Policy, May 2010

The Iowa Disease Surveillance System (IDSS) was developed by the Iowa Department of Public Health (IDPH) to streamline and enhance communication and collaboration between laboratory, hospital, and public health (local and state) personnel related to infectious disease surveillance and reporting (as required by Iowa Code 139A) throughout Iowa. IDSS is a tool that speeds communication regarding cases of reportable infectious disease to allow public health to respond sooner and reduce costs associated with disease reporting and surveillance.

Comparison and validation of tissue modelization and statistical classification methods in T1-weighted MR brain images.

This paper presents a validation study on statistical nonsupervised brain tissue classification techniques in magnetic resonance (MR) images. Several image models assuming different hypotheses regarding the intensity distribution model, the spatial model and the number of classes are assessed. The methods are tested on simulated data for which the classification ground truth is known. Different noise and intensity nonuniformities are added to simulate real imaging conditions. No enhancement of the image quality is considered either before or during the classification process. This way, the accuracy of the methods and their robustness against image artifacts are tested. Classification is also performed on real data where a quantitative validation compares the methods' results with an estimated ground truth from manual segmentations by experts. Validity of the various classification methods in the labeling of the image as well as in the tissue volume is estimated with different local and global measures. Results demonstrate that methods relying on both intensity and spatial information are more robust to noise and field inhomogeneities. We also demonstrate that partial volume is not perfectly modeled, even though methods that account for mixture classes outperform methods that only consider pure Gaussian classes. Finally, we show that simulated data results can also be extended to real data.

Purpura de Henoch-Schönlein: une prise en charge entre pédiatre et néphrologue pédiatre [Henoch-Schönlein Purpura a dual follow up between pediatrician and pediatric nephrologist].

Henoch-Schönlein purpura is a well known paediatric disease characterized by the classic triad: purpura, arthritis and abdominal pain. Short term prognosis is excellent and is mostly dependant on abdominal complications. Long term morbidity depends essentially on the severity of renal involvement which occurs in 35% of cases. Microhematuria and light proteinuria are the only signs in 80% of cases. The remaining 20% presents with nephrotic or nephritic syndrome and acute renal insufficiency. Among patients with Henoch-Schönlein nephritis the risk of developing renal insufficiency varies between 11-30% of cases. Currently, the follow up guidelines are multiple and the optimal treatment of nephritis is controversial; this is what this article proposes to discuss.

Proteomics of methylene blue photo-treated plasma before and after removal of the dye by an absorbent filter.

Methylene blue (MB) and light are used for virus inactivation of plasma for transfusion. However, the presence of MB has been the subject of concern, and efforts have been made to efficiently remove the dye after photo-treatment. For this study, plasma was collected by apheresis from 10 donors (group A), then treated using the MacoPharma THERAFLEX procedure (MB; 1 microM, and light exposure; 180 J/cm(2)) (group B), and finally filtered in order to remove the dye (group C). Proteins were analyzed by two-dimensional electrophoresis, and peptides showing modifications were characterized by mass spectrometry. Clottable and antigenic fibrinogen levels, as well as fibrin polymerization time were measured. Analyses of the gels focused on a region corresponding to pI between 4.5 and 6.5, and M(r) from 7000 to 58 000. In this area, 387 +/- 47 spots matched, and four of these spots presented significant modifications. They corresponded to changes of the gamma-chain of fibrinogen, of transthyretin, and of apolipoprotein A-I, respectively. A decrease of clottable fibrinogen and a prolongation of fibrin polymerization time were observed in groups B and C. Removal of MB by filtration was not responsible for additional protein alterations. The effect of over-treatment of plasma by very high concentrations of MB (50 microM) in association with prolonged light exposure (3 h) was also analyzed, and showed complex alterations of most of the plasma proteins, including fibrinogen gamma-chain, transthyretin, and apolipoprotein A-I. Our data indicates that MB treatment at high concentration and prolonged illumination severely injure plasma proteins. By contrast, at the MB concentration used to inactivate viruses, damages are apparently very restricted.

Rhythmic growth explained by coincidence between internal and external cues.

Most organisms use circadian oscillators to coordinate physiological and developmental processes such as growth with predictable daily environmental changes like sunrise and sunset. The importance of such coordination is highlighted by studies showing that circadian dysfunction causes reduced fitness in bacteria and plants, as well as sleep and psychological disorders in humans. Plant cell growth requires energy and water-factors that oscillate owing to diurnal environmental changes. Indeed, two important factors controlling stem growth are the internal circadian oscillator and external light levels. However, most circadian studies have been performed in constant conditions, precluding mechanistic study of interactions between the clock and diurnal variation in the environment. Studies of stem elongation in diurnal conditions have revealed complex growth patterns, but no mechanism has been described. Here we show that the growth phase of Arabidopsis seedlings in diurnal light conditions is shifted 8-12 h relative to plants in continuous light, and we describe a mechanism underlying this environmental response. We find that the clock regulates transcript levels of two basic helix-loop-helix genes, phytochrome-interacting factor 4 (PIF4) and PIF5, whereas light regulates their protein abundance. These genes function as positive growth regulators; the coincidence of high transcript levels (by the clock) and protein accumulation (in the dark) allows them to promote plant growth at the end of the night. Thus, these two genes integrate clock and light signalling, and their coordinated regulation explains the observed diurnal growth rhythms. This interaction may serve as a paradigm for understanding how endogenous and environmental signals cooperate to control other processes.

VoIP: Making Secure Calls and Maintaining High Call Quality

Modern multimedia communication tools must have high security, high availability and high quality of service (QoS). Any security implementation will directly impact on QoS. This paper will investigate how end-to-end security impacts on QoS in Voice over Internet Protocol (VoIP). The QoS is measured in terms of lost packet ratio, latency and jitter using different encryption algorithms, no security and just the use of IP firewalls in Local and Wide Area Networks (LAN and WAN). The results of laboratory tests indicate that the impact on the overall performance of VoIP depends upon the bandwidth availability and encryption algorithm used. The implementation of any encryption algorithm in low bandwidth environments degrades the voice quality due to increased loss packets and packet latency, but as bandwidth increases encrypted VoIP calls provided better service compared to an unsecured environment.

Outsourcing and Offshore Software Development in Africa

Globalization of software today is making many companies in the industrialized nations to outsource their work to low-wage countries. This thesis aims at obtaining an initial general overview of offshore software development in Africa. It seeks to explore the state of offshore software outsourcing in Africa with a focus on the factors contributing to the successes and challenges of offshore software development practicesin Africa. The thesis made use of electronic questionnaires and voice interviews to collect the data. Identified African vendors were interviewed, and the data was analyzed qualitatively. The study found that theAfrican software outsourcing industry is still at its infancy. It is expected that the industry will grow. However, a lot needs to be done, and African governments are called upon to actively implement supportive infrastructures that will promote the growth of the local and export software industries. Further research is recommended to cover the wide context ofthe topic.

Contemporary engagements within corridors of the past: temporal elasticity, graffiti, and the materiality of St. Rock Street, Barcelona

In a medieval Barcelonan side-street, urine, rubbish, and a bewildering array of graphic imagery splatters the narrowing walls between two major thoroughfares. A contemporary conflict between residents, unknown artists and others is played out using banners, bottles, stickers, posters, stencils, spray paint, and bodily substances. In this shadowed liminality, local and global debates are superimposed upon substructures constructed from disease, prostitution, and the Saint of the Plague. The continuing urban struggle constitutes temporal statements of dirt and purity, violence and humour, dominance and resistance, death and salvation. Like the renovated facades masking the crumbling remains of structures long neglected, the government’s literal whitewashing of the art is a temporal cover-up of a discursive symptom stretching from deeply embedded preconditions. However, from his niche in the angular bend of the alley bearing his name, the statue of St. Rock remains unblinkingly staring, raised above the contestations expressed below.

Optimal Mechanical PulpingProcesses for Eucalyptus, Acacia and Birch

Tässä diplomityössä tutkittiin ja vertailtiin eukalyptuksen, akaasian ja koivun kemimekaanista kuiduttamista ja valkaisua. Yleensä näitä puulajeja käytetään sellun keittoon. Puulajit eroavat toisistaan kasvupaikan ja kuiturakenteen osalta. Eukalyptus ja akaasia ovat niin sanottuja trooppisia lehtipuita, kun taas koivu kasvaa pohjoisilla vyöhykkeillä. Koivulla on kookkaimmat kuidut ja akaasialla pienimmät kuidut. Myös näiden lajien putkilot eroavat toisistaan. Koivun putkilot ovat pitkiä ja kapeita, kun taas eukalyptuksen ja akaasian putkilot ovat lyhyitä ja leveitä. Prosessiksi valittiin kaksivaiheinen APMP-prosessi. Koeajot tehtiinKeskuslaboratorio Oy:ssä. Massoille asetettiin seuraavat tavoitteet: freeness 150-200 ml ja vaaleus 80 %ISO. Eukalyptukselle ja koivulle tehtiin kaksi erilaista impregnointisarjaa, mutta akaasialle vain yksi. Jauhatuksen viimeisessä vaiheessa kokeiltiin myös jauhinvalkaisua. Jauhatuksen energiankulutus oli korkea varsinkin eukalyptuksella ja akaasialla. Jotta energiankulutus saataisiin pienemmäksi, tulisi käyttää enemmän lipeää, mutta se johtaa alkalitummumiseen. Lopuksi massat valkaistiin laboratoriossa. Eukalyptus ja koivu pystyttiin valkaisemaan vaaleuteen 80 %ISO, mutta eukalyptuksen valkaisu vaati enemmän peroksidia kuin koivun valkaisu. Akaasian lähtövaaleus oli niin alhainen, ettei siinä päästy tavoitevaaleuteen. Eukalyptuksella on parempi valonsironta ja paremmat lujuusominaisuudet kuin koivulla. Kemimekaanista massaa voidaan käyttää hienopaperissa parantamassa jäykkyyttä, bulkkia ja valonsirontaa, mutta usein ongelmana on alhainen vaaleus ja huono vaaleuden pysyvyys. Kemimekaanista massaa voidaankäyttää missä tahansa mekaanisissa painopapereissa. Mekaanisissa painopapereissa kemimekaanisella lehtipuumassalla voidaan korvata mekaanista havupuumassaa. Akaasia on niin tummaa, ettei sitä voida käyttää korkeavaaleuksisiin papereihin. Eukalyptus ja koivu ovat vaaleampia ja helpompia valkaista kuin akaasia, mutta myös niillä on niin huono vaaleudenpysyvyys että käyttö hienopapereissa on rajoittunutta. Mekaanisille eukalyptus ja koivumassoille hienopaperia parempi käyttökohde on mekaaniset painopaperit, kuten MWC-paperi.

Numerical and ExperimentalModelling of Gas Flow and Heat Transfer in the Air Gap of An Electric Machine

This work deals with the cooling of high-speed electric machines, such as motors and generators, through an air gap. It consists of numerical and experimental modelling of gas flow and heat transfer in an annular channel. Velocity and temperature profiles are modelled in the air gap of a high-speed testmachine. Local and mean heat transfer coefficients and total friction coefficients are attained for a smooth rotor-stator combination at a large velocity range. The aim is to solve the heat transfer numerically and experimentally. The FINFLO software, developed at Helsinki University of Technology, has been used in the flow solution, and the commercial IGG and Field view programs for the grid generation and post processing. The annular channel is discretized as a sector mesh. Calculation is performed with constant mass flow rate on six rotational speeds. The effect of turbulence is calculated using three turbulence models. The friction coefficient and velocity factor are attained via total friction power. The first part of experimental section consists of finding the proper sensors and calibrating them in a straight pipe. After preliminary tests, a RdF-sensor is glued on the walls of stator and rotor surfaces. Telemetry is needed to be able to measure the heat transfer coefficients at the rotor. The mean heat transfer coefficients are measured in a test machine on four cooling air mass flow rates at a wide Couette Reynolds number range. The calculated values concerning the friction and heat transfer coefficients are compared with measured and semi-empirical data. Heat is transferred from the hotter stator and rotor surfaces to the coolerair flow in the air gap, not from the rotor to the stator via the air gap, althought the stator temperature is lower than the rotor temperature. The calculatedfriction coefficients fits well with the semi-empirical equations and precedingmeasurements. On constant mass flow rate the rotor heat transfer coefficient attains a saturation point at a higher rotational speed, while the heat transfer coefficient of the stator grows uniformly. The magnitudes of the heat transfer coefficients are almost constant with different turbulence models. The calibrationof sensors in a straight pipe is only an advisory step in the selection process. Telemetry is tested in the pipe conditions and compared to the same measurements with a plain sensor. The magnitudes of the measured data and the data from the semi-empirical equation are higher for the heat transfer coefficients than thenumerical data considered on the velocity range. Friction and heat transfer coefficients are presented in a large velocity range in the report. The goals are reached acceptably using numerical and experimental research. The next challenge is to achieve results for grooved stator-rotor combinations. The work contains also results for an air gap with a grooved stator with 36 slots. The velocity field by the numerical method does not match in every respect the estimated flow mode. The absence of secondary Taylor vortices is evident when using time averagednumerical simulation.

Review. Precision viticulture. Research topics, challenges and opportunities in site-specific vineyard management

Precision Viticulture (PV) is a concept that is beginning to have an impact on the wine-growing sector. Its practical implementation is dependant on various technological developments: crop sensors and yield monitors, local and remote sensors, Global Positioning Systems (GPS), VRA (Variable-Rate Application) equipment and machinery, Geographic Information Systems (GIS) and systems for data analysis and interpretation. This paper reviews a number of research lines related to PV. These areas of research have focused on four very specific fields: 1) quantification and evaluation of within-field variability, 2) delineation of zones of differential treatment at parcel level, based on the analysis and interpretation of this variability, 3) development of Variable-Rate Technologies (VRT) and, finally, 4) evaluation of the opportunities for site-specific vineyard management. Research in these fields should allow winegrowers and enologists to know and understand why yield variability exists within the same parcel, what the causes of this variability are, how the yield and its quality are interrelated and, if spatial variability exists, whether site-specific vineyard management is justifiable on a technical and economic basis.

Cell Cycle Proteins and Retinal Degeneration: Evidences of New Potential Therapeutic Targets.

During different forms of neurodegenerative diseases, including the retinal degeneration, several cell cycle proteins are expressed in the dying neurons from Drosophila to human revealing that these proteins are a hallmark of neuronal degeneration. This is true for animal models of Alzheimer's, and Parkinson's diseases, Amyotrophic Lateral Sclerosis and for Retinitis Pigmentosa as well as for acute injuries such as stroke and light damage. Longitudinal investigation and loss-of-function studies attest that cell cycle proteins participate to the process of cell death although with different impacts, depending on the disease. In the retina, inhibition of cell cycle protein action can result to massive protection. Nonetheless, the dissection of the molecular mechanisms of neuronal cell death is necessary to develop adapted therapeutic tools to efficiently protect photoreceptors as well as other neuron types.