Effects of ionizing radiation and preservation on biomechanical properties of human costal cartilage

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Procedures to Evaluate the Efficiency of Protective Clothing Worn by Operators Applying Pesticide

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Performance evaluation of multi-stage filtration with use of granular activated carbon and synthetic non-woven fabrics

The multi stage filtration (MSF) is an alternative that permits to enlarge the spectrum of application of the slow sand filtration as for the effluent quality and run duration. In this research the use of MSF technology associated to a granular activated carbon (GAC) column as polishing mechanism of the final effluent was evaluated; in the slow sand filters GAC was used as an intermediate layer and non-woven synthetic fabrics were utilized as a first layer of the filter media. Five different tests were conducted, where the systems subjected to the treatment were: water from the Ipe Lake (Ilha Solteira, Sao Paulo, Brazil); water from the lake with water from a recreational fish pond; water from the lake with a phytoplankton and cyanobacteria overload simulation, with and without the use of the pre-filters as a stage of the treatment. The synthetic fabrics and GAC use resulted in the best turbidity removal and an efficient apparent and true color removal; in spite that the polishing columns reported similar results for those parameters. The utilization of GAC as an intermediate layer contributed to a better organic matter removal and the fabrics improved chlorophyll-a removal. The pre-filtration columns made an efficient algae and cyanobacteria removal, a function that was completed by the filters and reached >98% efficiency. The synthetic non-woven fabrics and GAC inclusion in MSF operation improved performance of this technology with ease of application and operation.

Education for Energy Efficiency through an Educational Game

This paper presents an assessment of an educational game for teaching the efficient use of electricity. Developed with Adobe Flash (R), it is a virtual board game where participants choose a car that starts the path and reaches the same final goal, going through a number of track steps defined in terms of a dice that each player rolls in turn. The car moves if the participant is able to correctly answer a question that is randomly generated by the software. The objective of the game is to answer questions related to energy efficiency promoting a healthy and attractive learning process for participants on concepts related to energy efficiency such as: the rational use of energy, the basic concepts of forms of energy generation, among others. The main objective of this paper is to assess the impact of the application of this virtual game in the teaching and learning process of high school students. Therefore, the game was applied in the discipline of physics in a class of junior high public school in the state of Sao Paulo. Initially, the class that had 43 students was divided into 10 groups of 4 students, and 1 group of 3 students. Each student group competed with one another. The idea was that each of them should indicate a student who was the representative of this group until only 4 group leaders were selected for the finals. At this stage, each student could interact with a group of up to ten students that acted as advisers. The adopted assessment process is based on the model proposed by Savi [7]. Then, at the end of the game, the students answered a prepared questionnaire based on the model proposed by Savi. According to Savi, although there are significant studies that show the importance of educational games for the process of cognitive development and learning concepts of students, there are few papers that present forms of assessing the potential of these resources. Thus, the assessment criteria proposed by Savi are based on the model of training evaluation by Kirkpatrick [3], taken as a reference to measure the efficiency of processes of continuing education courses for professionals. The authors assert that the metric of the evaluation proposed to assess the game is based on the first level of the model proposed by Kirkpatrick.

Long-wave infrared radiation reflected by compression stockings in the treatment of cellulite: a clinical double-blind, randomized and controlled study

SynopsisBackgroundCellulite refers to changes in skin relief on the thighs and buttocks of women, with a prevalence of 80-90%, causing dissatisfaction and search for treatment. Etiopathogenesis is multifactorial, as follows: herniation of the hypodermis towards the dermis, facilitated by perpendicular fibrous septa, changes in the dermal extracellular matrix, decreased adiponectin, genetic polymorphism, microcirculation alterations and inflammatory process. There are numerous therapeutic approaches, with little evidence of effectiveness. The long-wave infrared (LWIR) radiation interacts with water, improves microcirculation and stimulates metabolic processes. To date, the use of tissues with potential reflection of LWIR radiation has not been systematically investigated as adjuvant treatment for cellulite.ObjectiveTo investigate the efficacy and safety of the treatment of cellulite through the use of compression stockings made with thread reflecting LWIR radiation.Patients and methodsClinical study of therapeutic intervention, controlled and double-blind, including 30 women, aging from 25 to 40years, with cellulite of grades II and III on the thighs and buttocks who used compression stockings, pantyhose model, made with reflector thread of LWIR radiation, on only one randomized side. Women under other treatments for cellulite and with venous and/or blood insufficiencies were excluded. Evaluation of efficacy by clinical parameters, photographs, Dermatology Life Quality Index (DLQI), cutometry and high frequency ultrasonography and security by observation of adverse events and venous EcoDoppler recordings.ResultsDLQI scores showed significant reduction; the two-dimensional high-frequency ultrasonography showed an insignificant increase in dermal echogenicity as well as other efficacy parameters demonstrated no or slight improvement, with no differences between the sides exposed or not to LWIR; and there were no severe adverse events.ConclusionCompression stockings, with or without thread reflector of LWIR, showed slight effects in the appearance of cellulite, but the treatment determined a positive impact on women quality of life.

Efficiency of OPU-IVEP-ET of Fresh and Vitrified Embryos in Buffaloes

The present study aims to report ovum pickup (OPU), in vitro embryo production (IVEP) and embryo transfer (ET) outcomes of fresh and vitrified buffalo embryos. For this purpose, 36 buffalo donors were submitted to 11 OPU sessions (n = 201). A total of 998 oocytes (5.0 +/- 0.5/donor/session) and 584 viable oocytes (2.9 +/- 0.3/donor/session) were recovered. Viable oocytes (grades 1, 2 and 3) were subjected to IVM, IVF (D0) and IVC. On D2, 54.5% of cleavage rate was obtained. Embryo yield on D7 was 44.9% (grade 1: 229 embryos, grade 2: 5 embryos and grade 3: 28 embryos). From this total, 115 fresh (grades 1 to 3) and 70 vitrified embryos (only grade 1) were transferred into recipients previously synchronized with fixed time embryo transfer (FTET) protocol. Vitrification was performed using the cryotop method. Pregnancy diagnosis in fresh and in vitrified groups were, respectively: 43.5% (50/115) and 37.1% (26/70) on 30 days after embryo transfer, and 41.7% (48/115) and 31.4% (22/70) on 60 days after embryo transfer. In conclusion, our results demonstrate the possibilities for commercial use of the techniques of OPU, IVEP and ET of fresh and vitrified embryos in buffaloes.

The use of radon (Rn-222) and volatile organic compounds in monitoring soil gas to localize NAPL contamination at a gas station in Rio Claro, Sao Paulo State, Brazil

This study focuses on the presence of radon (Rn-222) and volatile organic compounds (VOCs) in soil gases at a gas station located in the city of Rio Claro, Sao Paulo, Brazil, where a fossil fuel leak occurred. The spatial distribution results show a correlation between Rn-222 and VOCs, consistent with the fact that radon gas has a greater chemical affinity with organic phases than with water. This finding demonstrates that the presence of a residual hydrocarbon phase in an aquifer can retain radon, leading to a reduced radon content in the soil gas. The data in this study confirm the results of previous investigations, in which the method used in this study provided a preliminary fingerprint of a contaminated area. Furthermore, the data analysis time is brief, and only simple equipment is required. (C) 2014 Published by Elsevier Ltd.

Efficiency and soil contamination during underground application of insecticides: control of leaf-cutting ants with thermal foggers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ecological efficiency in glycerol combustion

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Energy and hydraulic efficiency in conventional water supply systems

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comportamento térmico de coberturas em camadas duplas e estudo da substituição da cama por piso plástico na qualidade do ar, desempenho e índice de lesões em frangos de corte

Pós-graduação em Zootecnia - FCAV

Filtros UV na água de abastecimento público na região da bacia hidrográfica tietê-jacaré: desenvolvimento de método, estudo de ocorrência e concentrações ambientais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise da relação desempenho/custo de alguns coletores solares comerciais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Water use of Juniperus virginiana trees encroached into mesic prairies in Oklahoma, USA

Juniperus virginiana (eastern redcedar) is encroaching into mesic prairies of the southern Great Plains, USA, and is altering the hydrologic cycle. We used the thermal dissipation technique to quantify daily water use of J. virginiana into a mesic prairie by measuring 19 trees of different sizes from different density stands located in north-central Oklahoma during 2011. We took the additional step to calibrate our measurements by comparing thermal dissipation technique estimates to volumetric water use for a subset of trees. Except for days with maximum air temperature below -3 degrees C, J. virginiana trees used water year round, reached a peak in late May, and exhibited reduced water use in summer when soil water availability was low. Overall daily average water use was 24 l (+/- 21.81 s.d.) per tree. Trees in low density stands used more water than trees with similar diameters from denser stands. However, there was no difference in water use between trees in different density stands when expressed on a canopy area basis. Approximately 50% of variation in water use that remained after accounting for the factors site, tree, and day was explained using a physiologically-based model that included daily potential evapotranspiration, maximum vapour pressure deficit, maximum temperature, solar radiation, and soil water storage between 0 and 10 cm. Our model suggested that a J. virginiana woodland with a closed canopy is capable of transpiring almost all precipitation reaching the soil in years with normal precipitation, indicating the potential for encroachment to reduce water yield for streamflow and groundwater recharge. Copyright (C) 2013 John Wiley & Sons, Ltd.

Hot turning of a difficult-to-machine steel (sae xev-f) aided by infrared radiation

A possible way for increasing the cutting tool life can be achieved by heating the workpiece in order to diminish the shear stress of material and thus decrease the machining forces. In this study, quartz electrical resistances were set around the workpiece for heating it during the turning. In the tests, heat-resistant austenitic alloy steel was used, hardenable by precipitation, mainly used in combustion engine exhaustion valves, among other special applications for industry. The results showed that in the hot machining the cutting tool life can be increased by 340% for the highest cutting speed tested and had a reduction of 205% on workpiece surface roughness, accompanied by a force decrease in relation to conventional turning. In addition, the chips formed in hot turning exhibited a stronger tendency to continuous chip formation indicating less energy spent in material removal process. Microhardness tests performed in the workpieces subsurface layers at 5 m depth revealed slightly higher values in the hot machining than in conventional, showing a tendency toward the formation of compressive residual stress into plastically deformed layer. The hot turning also showed better performance than machining using cutting fluid. Since it is possible to avoid the use of cutting fluid, this machining method can be considered better for the environment and for the human health.