Fracture network characterization using hydrological and geophysical data

Les décisions de gestion des eaux souterraines doivent souvent être justiffées par des modèles quantitatifs d'aquifères qui tiennent compte de l'hétérogénéité des propriétés hydrauliques. Les aquifères fracturés sont parmi les plus hétérogènes et très difficiles à étudier. Dans ceux-ci, les fractures connectées, d'ouverture millimètrique, peuvent agir comme conducteurs hydrauliques et donc créer des écoulements très localisés. Le manque général d'informations sur la distribution spatiale des fractures limite la possibilité de construire des modèles quantitatifs de flux et de transport. Les données qui conditionnent les modèles sont généralement spatialement limitées, bruitées et elles ne représentent que des mesures indirectes de propriétés physiques. Ces limitations aux données peuvent être en partie surmontées en combinant différents types de données, telles que les données hydrologiques et de radar à pénétration de sol plus commun ément appelé géoradar. L'utilisation du géoradar en forage est un outil prometteur pour identiffer les fractures individuelles jusqu'à quelques dizaines de mètres dans la formation. Dans cette thèse, je développe des approches pour combiner le géoradar avec les données hydrologiques affn d'améliorer la caractérisation des aquifères fracturés. Des investigations hydrologiques intensives ont déjà été réalisées à partir de trois forage adjacents dans un aquifère cristallin en Bretagne (France). Néanmoins, la dimension des fractures et la géométrie 3-D des fractures conductives restaient mal connue. Affn d'améliorer la caractérisation du réseau de fractures je propose dans un premier temps un traitement géoradar avancé qui permet l'imagerie des fractures individuellement. Les résultats montrent que les fractures perméables précédemment identiffées dans les forages peuvent être caractérisées géométriquement loin du forage et que les fractures qui ne croisent pas les forages peuvent aussi être identiffées. Les résultats d'une deuxième étude montrent que les données géoradar peuvent suivre le transport d'un traceur salin. Ainsi, les fractures qui font partie du réseau conductif et connecté qui dominent l'écoulement et le transport local sont identiffées. C'est la première fois que le transport d'un traceur salin a pu être imagé sur une dizaines de mètres dans des fractures individuelles. Une troisième étude conffrme ces résultats par des expériences répétées et des essais de traçage supplémentaires dans différentes parties du réseau local. En outre, la combinaison des données de surveillance hydrologique et géoradar fournit la preuve que les variations temporelles d'amplitude des signaux géoradar peuvent nous informer sur les changements relatifs de concentrations de traceurs dans la formation. Par conséquent, les données géoradar et hydrologiques sont complémentaires. Je propose ensuite une approche d'inversion stochastique pour générer des modèles 3-D de fractures discrètes qui sont conditionnés à toutes les données disponibles en respectant leurs incertitudes. La génération stochastique des modèles conditionnés par géoradar est capable de reproduire les connexions hydrauliques observées et leur contribution aux écoulements. L'ensemble des modèles conditionnés fournit des estimations quantitatives des dimensions et de l'organisation spatiale des fractures hydrauliquement importantes. Cette thèse montre clairement que l'imagerie géoradar est un outil utile pour caractériser les fractures. La combinaison de mesures géoradar avec des données hydrologiques permet de conditionner avec succès le réseau de fractures et de fournir des modèles quantitatifs. Les approches présentées peuvent être appliquées dans d'autres types de formations rocheuses fracturées où la roche est électriquement résistive.

Informe preliminar del Crucero 6608 - 09 de invierno 1966 (Máncora - Ilo)

Describe las acciones desplegadas por el crucero del B.A.P. Unanue, correspondiente al invierno de 1967, en el que se investigó el área entre el 04º00´s y 17º35´S ocupándose de 168 estaciones de rutina distribuidas en 20 perfiles. Durante todo el recorrido se investigó la presencia de cardúmenes de peces por medio de los equipos de ecosonda y radar y se realizaron observaciones sobre presencia de aves y mamíferos marinos.

Structural joint inversion of time-lapse crosshole ERT and GPR traveltime data

Time-lapse geophysical monitoring and inversion are valuable tools in hydrogeology for monitoring changes in the subsurface due to natural and forced (tracer) dynamics. However, the resulting models may suffer from insufficient resolution, which leads to underestimated variability and poor mass recovery. Structural joint inversion using cross-gradient constraints can provide higher-resolution models compared with individual inversions and we present the first application to time-lapse data. The results from a synthetic and field vadose zone water tracer injection experiment show that joint 3-D time-lapse inversion of crosshole electrical resistance tomography (ERT) and ground penetrating radar (GPR) traveltime data significantly improve the imaged characteristics of the point injected plume, such as lateral spreading and center of mass, as well as the overall consistency between models. The joint inversion method appears to work well for cases when one hydrological state variable (in this case moisture content) controls the time-lapse response of both geophysical methods. Citation: Doetsch, J., N. Linde, and A. Binley (2010), Structural joint inversion of time-lapse crosshole ERT and GPR traveltime data, Geophys. Res. Lett., 37, L24404, doi: 10.1029/2010GL045482.

Integration of high-resolution geophysical data for the characterization of alluvial aquifers : new approaches and implications for hydrological predictions

Abstract Accurate characterization of the spatial distribution of hydrological properties in heterogeneous aquifers at a range of scales is a key prerequisite for reliable modeling of subsurface contaminant transport, and is essential for designing effective and cost-efficient groundwater management and remediation strategies. To this end, high-resolution geophysical methods have shown significant potential to bridge a critical gap in subsurface resolution and coverage between traditional hydrological measurement techniques such as borehole log/core analyses and tracer or pumping tests. An important and still largely unresolved issue, however, is how to best quantitatively integrate geophysical data into a characterization study in order to estimate the spatial distribution of one or more pertinent hydrological parameters, thus improving hydrological predictions. Recognizing the importance of this issue, the aim of the research presented in this thesis was to first develop a strategy for the assimilation of several types of hydrogeophysical data having varying degrees of resolution, subsurface coverage, and sensitivity to the hydrologic parameter of interest. In this regard a novel simulated annealing (SA)-based conditional simulation approach was developed and then tested in its ability to generate realizations of porosity given crosshole ground-penetrating radar (GPR) and neutron porosity log data. This was done successfully for both synthetic and field data sets. A subsequent issue that needed to be addressed involved assessing the potential benefits and implications of the resulting porosity realizations in terms of groundwater flow and contaminant transport. This was investigated synthetically assuming first that the relationship between porosity and hydraulic conductivity was well-defined. Then, the relationship was itself investigated in the context of a calibration procedure using hypothetical tracer test data. Essentially, the relationship best predicting the observed tracer test measurements was determined given the geophysically derived porosity structure. Both of these investigations showed that the SA-based approach, in general, allows much more reliable hydrological predictions than other more elementary techniques considered. Further, the developed calibration procedure was seen to be very effective, even at the scale of tomographic resolution, for predictions of transport. This also held true at locations within the aquifer where only geophysical data were available. This is significant because the acquisition of hydrological tracer test measurements is clearly more complicated and expensive than the acquisition of geophysical measurements. Although the above methodologies were tested using porosity logs and GPR data, the findings are expected to remain valid for a large number of pertinent combinations of geophysical and borehole log data of comparable resolution and sensitivity to the hydrological target parameter. Moreover, the obtained results allow us to have confidence for future developments in integration methodologies for geophysical and hydrological data to improve the 3-D estimation of hydrological properties.

Development of a system for 3D high-resolution seismic reflection profiling on lakes

A high-resolution three-dimensional (3D) seismic reflection system for small-scale targets in lacustrine settings has been developed. Its main characteristics include navigation and shot-triggering software that fires the seismic source at regular distance intervals (max. error of 0.25 m) with real-time control on navigation using differential GPS (Global Positioning System). Receiver positions are accurately calculated (error < 0.20 m) with the aid of GPS antennas attached to the end of each of three 24-channel streamers. Two telescopic booms hold the streamers at a distance of 7.5 m from each other. With a receiver spacing of 2.5 m, the bin dimension is 1.25 m in inline and 3.75 m in crossline direction. To test the system, we conducted a 3D survey of about 1 km(2) in Lake Geneva, Switzerland, over a complex fault zone. A 5-m shot spacing resulted in a nominal fold of 6. A double-chamber bubble-cancelling 15/15 in(3) air gun (40-650 Hz) operated at 80 bars and 1 m depth gave a signal penetration of 300 m below water bottom and a best vertical resolution of 1.1 m. Processing followed a conventional scheme, but had to be adapted to the high sampling rates, and our unconventional navigation data needed conversion to industry standards. The high-quality data enabled us to construct maps of seismic horizons and fault surfaces in three dimensions. The system proves to be well adapted to investigate complex structures by providing non-aliased images of reflectors with dips up to 30 degrees.

A Small Baseline DIFSAR Approach for Investigating Deformations on Full Resolution SAR Interferograms

This paper presents a differential synthetic apertureradar (SAR) interferometry (DIFSAR) approach for investigatingdeformation phenomena on full-resolution DIFSAR interferograms.In particular, our algorithm extends the capabilityof the small-baseline subset (SBAS) technique that relies onsmall-baseline DIFSAR interferograms only and is mainly focusedon investigating large-scale deformations with spatial resolutionsof about 100 100 m. The proposed technique is implemented byusing two different sets of data generated at low (multilook data)and full (single-look data) spatial resolution, respectively. Theformer is used to identify and estimate, via the conventional SBAStechnique, large spatial scale deformation patterns, topographicerrors in the available digital elevation model, and possibleatmospheric phase artifacts; the latter allows us to detect, onthe full-resolution residual phase components, structures highlycoherent over time (buildings, rocks, lava, structures, etc.), as wellas their height and displacements. In particular, the estimation ofthe temporal evolution of these local deformations is easily implementedby applying the singular value decomposition technique.The proposed algorithm has been tested with data acquired by theEuropean Remote Sensing satellites relative to the Campania area(Italy) and validated by using geodetic measurements.

Maximum-likelihood estimation of specific differential phase and attenuation in rain

Precise estimation of propagation parameters inprecipitation media is of interest to improve the performanceof communications systems and in remote sensing applications.In this paper, we present maximum-likelihood estimators ofspecific attenuation and specific differential phase in rain. Themodel used for obtaining the cited estimators assumes coherentpropagation, reflection symmetry of the medium, and Gaussianstatistics of the scattering matrix measurements. No assumptionsabout the microphysical properties of the medium are needed.The performance of the estimators is evaluated through simulateddata. Results show negligible estimators bias and variances closeto Cramer–Rao bounds.

Disseny pràctic d'un transmissor d'àudio complert utilitzant una modulació AM

RESUM Un transmissor d’AM (modulació per amplitud), utilitza una de les moltes tècniques de modulació existents avui en dia. És molta la importància que té la modulació de senyals i aquests en són alguns exemples: -Facilita la propagació del senyal per cable o per aire. -Ordena l’espectre, distribuint Canals a les diferents informacions. -Disminueix la dimensió de les antenes. -Optimitza l’ample de banda de cada canal. -Evita interferències entre Canals. -Protegeix la informació de les degradacions per soroll. -Defineix la qualitat de la informació transmesa. L’objectiu principal d’aquest treball, serà realitzar un transmissor d’AM utilitzant components electrònics disponibles al mercat. Això es realitzarà mitjançant diversos procediments de disseny. Es realitzarà un procediment de disseny teòric, tot utilitzant els “datasheets” dels diferents components. Es realitzarà un procediment de disseny mitjançant la simulació, gràcies al qual es podrà provar el disseny del dispositiu i realitzar-ne algunes parts impossibles a reproduir teòricament. I finalment es realitzarà el dispositiu a la pràctica. Entre les conclusions més rellevants obtingudes en aquest treball, voldríem destacar la importància de la simulació per poder dissenyar circuits de radiofreqüència. En aquest treball s’ha demostrat que gràcies a una bona simulació, el primer prototip de dispositiu creat ens ha funcionat a la perfecció. D’altre banda, també comentar la importància d’un disseny adequat d’antena per poder aprofitar al màxim el rendiment del nostre dispositiu. Per concloure, la realització d’un aparell transmissor aporta unes nocions equilibrades d’electrònica i telecomunicacions importants per al disseny de dispositius de comunicació.

Calibration of high-resolution geophysical data with tracer test measurements to improve hydrological predictions

Relationships between porosity and hydraulic conductivity tend to be strongly scale- and site-dependent and are thus very difficult to establish. As a result, hydraulic conductivity distributions inferred from geophysically derived porosity models must be calibrated using some measurement of aquifer response. This type of calibration is potentially very valuable as it may allow for transport predictions within the considered hydrological unit at locations where only geophysical measurements are available, thus reducing the number of well tests required and thereby the costs of management and remediation. Here, we explore this concept through a series of numerical experiments. Considering the case of porosity characterization in saturated heterogeneous aquifers using crosshole ground-penetrating radar and borehole porosity log data, we use tracer test measurements to calibrate a relationship between porosity and hydraulic conductivity that allows the best prediction of the observed hydrological behavior. To examine the validity and effectiveness of the obtained relationship, we examine its performance at alternate locations not used in the calibration procedure. Our results indicate that this methodology allows us to obtain remarkably reliable hydrological predictions throughout the considered hydrological unit based on the geophysical data only. This was also found to be the case when significant uncertainty was considered in the underlying relationship between porosity and hydraulic conductivity.

An observational study of the 7 September 2005 Barcelona tornado outbreak

This paper presents an observational study of the tornado outbreak that took place on the 7 September 2005 in the Llobregat delta river, affecting a densely populated and urbanised area and the Barcelona International airport (NE Spain). The site survey confirmed at least five short-lived tornadoes. Four of them were weak (F0, F1) and the other one was significant (F2 on the Fujita scale). They started mostly as waterspouts and moved later inland causing extensive damage estimated in 9 million Euros, three injured people but fortunately no fatalities. Large scale forcing was provided by upper level diffluence and low level warm air advection. Satellite and weather radar images revealed the development of the cells that spawned the waterspouts along a mesoscale convergence line in a highly sheared and relatively low buoyant environment. Further analysis indicated characteristics that could be attributed indistinctively to non-supercell or to mini-supercell thunderstorms.

Improving QPF by blending techniques at the Meteorological Service of Catalonia

The current operational very short-term and short-term quantitative precipitation forecast (QPF) at the Meteorological Service of Catalonia (SMC) is made by three different methodologies: Advection of the radar reflectivity field (ADV), Identification, tracking and forecasting of convective structures (CST) and numerical weather prediction (NWP) models using observational data assimilation (radar, satellite, etc.). These precipitation forecasts have different characteristics, lead time and spatial resolutions. The objective of this study is to combine these methods in order to obtain a single and optimized QPF at each lead time. This combination (blending) of the radar forecast (ADV and CST) and precipitation forecast from NWP model is carried out by means of different methodologies according to the prediction horizon. Firstly, in order to take advantage of the rainfall location and intensity from radar observations, a phase correction technique is applied to the NWP output to derive an additional corrected forecast (MCO). To select the best precipitation estimation in the first and second hour (t+1 h and t+2 h), the information from radar advection (ADV) and the corrected outputs from the model (MCO) are mixed by using different weights, which vary dynamically, according to indexes that quantify the quality of these predictions. This procedure has the ability to integrate the skill of rainfall location and patterns that are given by the advection of radar reflectivity field with the capacity of generating new precipitation areas from the NWP models. From the third hour (t+3 h), as radar-based forecasting has generally low skills, only the quantitative precipitation forecast from model is used. This blending of different sources of prediction is verified for different types of episodes (convective, moderately convective and stratiform) to obtain a robust methodology for implementing it in an operational and dynamic way.

The daily energy expenditure in stable chronic obstructive pulmonary disease.

Resting energy expenditure is frequently increased in chronic obstructive pulmonary disease (COPD), but it is unknown if this hypermetabolism holds true over 24 h. The aim of this study was to measure the actual 24-h energy expenditure (24-h EE) in patients with stable COPD. Energy expenditure was measured by indirect calorimetry, using a metabolic chamber for 24-h EE and a canopy for basal metabolic rate (BMR). Physical activity was detected in the chamber by a radar system, and its duration was quantified. Two groups matched for age and height were studied: 16 male ambulatory patients with stable COPD and 12 male normal subjects. Body weight was 92 +/- 12% of ideal body weight in the group with COPD and 108 +/- 11% in the control group (p = 0.01). BMR was 120 +/- 7% of predicted in the group with COPD and 108 +/- 12% in the control group (p < 0.01). However, 24-h EE was similar in the two groups, amounting to 1,935 +/- 259 kcal in patients with COPD and 2,046 +/- 253 kcal in the control group (NS). This corresponded to 145% and 137% of predicted BMR, and to 121% and 126% of measured BMR in patients with COPD and the control group, respectively (NS). Patients were allowed to pursue their usual treatment within the chamber, and a positive correlation existed between 24-h EE and the daily dose of inhaled beta 2-agonists (p < 0.03). During daytime, physical activity was lower in patients with COPD. This study shows that patients with stable COPD are characterized by a normal daily energy expenditure in controlled conditions in spite of an increased basal metabolic rate. They appear to save energy by reducing their spontaneous level of physical activity.

Ecotoxicological approaches to assess the long-term effects of four anticancer drugs and metabolites on Daphnia pulex

The aquatic environment is exposed continuously and increasingly to chemical substances such as pharmaceuticals. These medical compounds are released into the environment after having being consumed and body-excreted by patients. Pharmaceutical residues are synthetic molecules that are not always removed by traditional sewage treatment processes and thus escape degradation. Among pharmaceuticals that escape sewage treatment plants (STPs), the anticancer drugs were measured in STP effluents and natural waters. In the aquatic environment, their long-term effects at low concentrations are sparsely known on non-target species. Tamoxifen is an anticancer drug that is widely prescribed worldwide for the prevention and treatment of hormone receptor-positive breast cancers. Two of its metabolites, i.e., endoxifen and 4-hydroxy- tamoxifen (4OHTam), have high pharmacological potency in vivo and such as tamoxifen, they are excreted via faeces by patients. Tamoxifen was measured in STP effluents and natural waters but, to the best of our knowledge, its metabolites concentrations in waters have never been reported. Imatinib is another and recent anticancer compound that targets specific tumour cells. This pharmaceutical is also body excreted and because of its increasing use in cancer treatment, imatinib may reach the natural water. The effects of tamoxifen and imatinib are unknown upon more than one generation of aquatic species. And the effects of 4OHTam, endoxifen have never been studied in ecotoxicology so far. The aims of this thesis were threefold. First, the sensitivity of D. pulex exposed to tamoxifen, 4OHTam, endoxifen or imatinib was assessed using ecotoxicological experiments. Ecotoxicology is the science that considers the toxic effects of natural or synthetic substances, such as pharmaceuticals, on organisms, populations, community and ecosystem. Acute and multigenerational (2-4 generations) tests were performed on daphnids considering several studied endpoints, such as immobilisation, size, reproduction, viability and intrinsic rate of natural increase. Additional prospective assays were designed to evaluate whether 1) low concentrations of tamoxifen and 4OHTam were able to induce toxic effects when used in combination, and 2) daphnids were able to recover when offspring were withdrawn from solutions carrying the pharmaceutical. Second, the stability of tamoxifen, 4OHTam and endoxifen in incubation medium was evaluated in solution exempted from daphnids. Because the nominal concentrations of tamoxifen, 4OHTam and endoxifen did not correspond to the measured, we provide a predictive method to estimate the concentrations of these chemicals during long-term ecotoxicological tests. Finally, changes in protein expressions were analysed in D. pulex exposed 2 or 7 seven days to tamoxifen using ecotoxicoproteomic experiments with a shot-gun approach inducing a peptide fractionation step. Our results show that tamoxifen, 4OHTam and endoxifen induced adverse effects in D. pulex at environmentally relevant concentrations. At very low concentrations, these molecules displayed unusual and teratogenic effects because morphological abnormalities were observed in offspring, such as thick and short antennas, curved spines, premature neonates and aborted eggs. Tamoxifen was the most toxic compound among the test chemicals, followed by 4OHTam, endoxifen and imatinib. Tamoxifen no-observed effect concentrations (NOECs) that were calculated for size, reproduction and intrinsic rate were below or in the range of the concentrations measured in natural waters, i.e., between 0.12 µg/L and 0.67 µg/L. For instance, the tamoxifen NOECs that were calculated for reproduction were between 0.67 and 0.72 µg/L, whereas the NOEC was < 0.15 µg/L when based on morphological abnormalities. The NOECs of 4OHTam were higher but still in the same order of magnitude as tamoxifen environmental concentrations, with a value of 1.48 µg/L. Endoxifen NOEC for the intrinsic rate of natural increase (r) and the reproduction were 0.4 and 4.3 µg/L, respectively. Daphnids that were withdrawn from tamoxifen and 4OHTam were not able to recover. Also, the reproduction of D. pulex was reduced when the treated animals were exposed to the combination of tamoxifen and 4OHTam while no effects were observed when these chemicals were tested individually at the same concentration. Among the anticancer drugs that were tested during this thesis, imatinib was the less toxic molecule towards D. pulex. No effects on size and reproduction were observed within two generations, except for the first whose reproduction decreased at the highest test concentration, i.e., 626 µg/L. Our results also underline the need to use measured or predicted concentrations instead of the nominal during aquatic experiments, particularly when lipophilic molecules are tested. Indeed, notable differences between nominal (i.e., theoretical) and measured concentrations were found with tamoxifen, 4OHTam and endoxifen at all test concentrations. A cost and time sustainable method was proposed to predict the test exposure levels of these chemicals during long-term experiments. This predictive method was efficient particularly for low concentrations, which corresponded to the test concentrations in multigenerational tests. In the ecotoxicoproteomic experiments a total of 3940 proteins were identified and quantified in D. pulex exposed to tamoxifen. These results are currently the largest dataset from D. pulex that is published and the results of proteomic analyses are available for the scientific community. Among these 3940 proteins, 189 were significantly different from controls. After protein annotation, we assumed that treated daphnids with tamoxifen had shifted cost-energy functions, such as reproduction, to maintain their basic metabolism necessary to survive. This metabolic cost hypothesis was supported by the presence of proteins involved in oxidative stress. Biomarkers for early detection of tamoxifen harmful effects on D. pulex were not discovered but the proteins of the vitellogenin-2 family (E9H8K5) and the ryanodine receptor (E9FTU9) are promising potential biomarkers because their expression was already modified after 2 days of treatment. In this thesis, the effects of tamoxifen, 4OHTam and endoxifen on daphnids raise questions about the potential impact of tamoxifen and 4OHTam in other aquatic ecosystems, and therefore, about metabolites in ecotoxicology. Because the NOECs were environmentally relevant, these results suggest that tamoxifen and 4OHTam may be interesting pharmaceuticals to consider in risk assessment. Our findings also emphasize the importance of performing long-term experiments and of considering multi-endpoints instead of the standard reproductive endpoint. Finally, we open the discussion about the importance to measure test exposures or not, during ecotoxicological studies. -- Les milieux aquatiques sont exposés continuellement à un nombre croissant de substances chimiques, notamment les médicaments issus de la médecine vétérinaire et humaine. Chez les patients, les substances administrées sont utilisées par le corps avant d'être éliminées par l'intermédiaire des excrétas dans le système d'eaux usées de la ville. Ces eaux rejoignent ensuite une station de traitement afin d'y éliminer les déchets. Dans le cas des molécules chimiques, il arrive que les processus de traitement d'eaux usées ne soient pas suffisamment efficaces et que ces molécules ne soient pas dégradées. Elles sont alors libérées dans le milieu aquatique avec les effluents de la station d'épuration. Une fois dans l'environnement, ces résidus de médicaments sont susceptibles d'induire des effets sur la faune et la flore aquatique, dont les conséquences à long terme et à faibles concentrations sont peu connues. Les anticancéreux sont une famille de médicaments qui peuvent échapper aux traitements des stations d'épuration et qui sont retrouvées dans le milieu aquatique naturel. Parmi ces substances, le tamoxifen est une molécule utilisée dans le monde entier pour prévenir et traiter les cancers hormonaux dépendant du sein, notamment. Une fois ingéré, le tamoxifen est transformé par le foie en métabolites dont deux d'entre eux, le 4-hydroxy-tamoxifen (4OHTam) et l'endoxifen, possèdent un affinité pour les récepteurs aux estrogènes et une efficacité sur les cellules tumorales supérieure au tamoxifen lui- même. Tout comme la molécule mère, ces métabolites sont principalement éliminés par l'intermédiaire des fèces. Le tamoxifen a déjà été mesuré dans les effluents de stations d'épuration et dans les eaux naturelles, mais aucune valeur n'a été reportée pour ses métabolites jusqu'à présent. Un autre anticancéreux, également éliminé par voie biliaire et susceptible d'atteindre l'environnement, est l'imatinib. Cette récente molécule a révolutionné le traitement et la survie des patients souffrant de leucémie myéloïde chronique et de tumeur stromales gastrointestinales. Les effets du tamoxifen et de l'imatinib sur plusieurs générations d'organismes aquatiques, tels que les microcrustacés Daphnia, sont inconnus et le 4OHTam et l'endoxifen n'ont même jamais été testés en écotoxicologie. Cette thèse s'est articulée autour de trois objectifs principaux. Premièrement, la sensibilité des D. pulex exposés au tamoxifen, 4OHTam, endoxifen et imatinib a été évaluée par l'intermédiaire de tests aigus et de tests sur deux à quatre générations. La mobilité, la taille, la reproduction, la viabilité et la croissance potentielle de la population ont été relevées au cours de ces expériences. Des tests supplémentaires, à but prospectifs, ont également été réalisés afin d'évaluer 1) la capacité de récupération des daphnies, lorsque leurs descendants ont été placés dans un milieu exempté de tamoxifen ou de 4OHTam, 2) les effets chez les daphnies exposées à une solution contenant de faibles concentration de tamoxifen et de 4OHTam mélangés. Le deuxième objectif a été d'évaluer la stabilité du tamoxifen, 4OHTam et endoxifen dilué dans le milieu des daphnies. Après analyses, les concentrations mesurées ne correspondaient pas aux concentrations nominales (c.-à-d., théoriques) et il a été nécessaire de développer une méthode efficace de prédiction des niveaux d'exposition lors de tests de longue durée réalisés avec ces trois molécules. Finalement, des changements dans l'expression des protéines chez des daphnies exposées au tamoxifen ont été investigués par l'intermédiaire d'expériences écotoxicoprotéomiques avec une approche dite de shot-gun avec une étape de fractionnement des protéines. Les résultats obtenus dans cette thèse montrent que le tamoxifen, le 4OHTam et l'endoxifen induisent des effets indésirables chez les daphnies à des niveaux d'exposition proches ou identiques aux concentrations du tamoxifen mesurées dans l'environnement, c'est-à-dire 0.12 et 0.67 µg/L de tamoxifen. Ces molécules ont induit des effets inhabituels tels que la production de : nouveau-nés anormaux, avec des antennes et des queues déformées, des prématurés et des oeufs avortés. Le tamoxifen fut la molécule la plus toxique pour les D. pulex suivie du 4OHTam, de l'endoxifen et enfin de l'imatinib. Lors des expériences sur plusieurs générations, les concentrations n'ayant statistiquement pas d'effet (c.à.d. NOEC en anglais) sur la taille, la reproduction et la croissance intrinsèque de la population étaient du même ordre de grandeur que les concentrations environnementales du tamoxifen. Par exemple, les NOECs du tamoxifen calculées pour la reproduction étaient de 0.67 et 0.72 µg/L, tandis que celle calculée sur la base des anomalies chez les nouveau-nés était < 0.15 µg/L. Les NOECs du 4OHTam se situaient entre 0.16 et 1.48 µg/L et celles de l'endoxifen pour la croissance intrinsèque de la population, ainsi que pour la reproduction, étaient de 0.4 et 4.3 µg/L, respectivement. Dans l'expérience basée sur la récupération des daphnies, la taille et la reproduction ont diminué bien que la descendance fût placée dans un milieu sans substances chimiques. Les daphnies exposées au mélange de tamoxifen et de 4OHTam ont produit moins de nouveau-nés que les contrôles, alors que ces concentrations n'ont pas induit d'effets lorsque testées individuellement. Finalement, l'imatinib n'a pas montré d'effets sur les deux générations testées. Seule la première génération exposée à la plus haute concentration (626 µg/L) a montré une diminution de la reproduction. Les résultats obtenus lors de l'évaluation de la stabilité du tamoxifen, 4OHTam et endoxifen dans le milieu des daphnies ont souligné l'importance d'utiliser des concentrations mesurées ou prédites en écotoxicologie. En effet, des différences notables entre concentrations nominales et mesurées ont été observées à toutes les concentrations et l'hypothèse d'un phénomène d'adsorption sur le verre des récipients a été posée. De ce fait, il a été nécessaire d'élaborer une méthode prédictive efficace et acceptable, en terme de temps et de coûts. Une régression polynomiale basée sur des concentrations mesurées et nominales a permis de prédire avec efficacité les faibles niveaux d'exposition utilisés lors d'expériences écotoxicologiques à long terme, sur plusieurs générations. Suite aux expériences d'écotoxicoprotéomiques, un total de 3940 protéines ont été identifiées et quantifiées chez des daphnies exposées au tamoxifen. Ce nombre est actuellement la plus large série de données publiées et mises à disposition pour la communauté scientifique. Parmi ces protéines, 189 sont significatives et possiblement reliées à des processus de reproduction et de stress. Sur cette base, nous avons émis l'hypothèse que les individus subissant un stress, lié à l'exposition au tamoxifen, ont utilisé leur énergie de base pour favoriser leur survie plutôt que la reproduction. Enfin, la détermination de bio-marqueurs exprimant des dommages précoces des daphnies exposées au tamoxifen n'a pas abouti en tant que telle, mais des protéines prometteuses, telle que la famille de viellogenin-2 (E9H8K5) et le récepteur à la ryanodine (E9FTU9), ont été exprimées après deux jours d'exposition déjà. Ces protéines pourraient faire l'objet d'investigations écotoxicoprotéomiques futures. Les résultats de cette thèse posent certaines questions quant au risque du tamoxifen, du 4OHTam et de l'endoxifen sur la faune et la flore aquatique et plus particulièrement sur les anticancéreux présents dans l'environnement. Les effets toxiques de ces molécules ont été observés à des concentrations environnementales et sur plusieurs générations. La question de considérer les métabolites, et ainsi les pro-médicaments, en écotoxicologie est soulevée, notamment parce que ces molécules peuvent être plus actives et efficaces que la molécule mère. Les expériences chroniques, sur plusieurs générations sont également à favoriser car elles offrent un meilleur reflet de la réalité environnementale que des essais aigus ou d'une génération. L'utilisation de la protéomique permet d'agrandir les connaissances sur les effets des médicaments à un niveau inférieur de l'organisation biologique et ainsi, de mieux comprendre de potentiels mécanismes d'action ou de déterminer de potentiels biomarqueurs. Finalement, il semble important de discuter de l'opportunité de mesurer les concentrations qui sont testées en écotoxicologie afin de ne pas sous-estimer le risque pour la faune et la flore aquatique.

Single-hole GPR reflection imaging of solute transport in a granitic aquifer

Identifying transport pathways in fractured rock is extremely challenging as flow is often organized in a few fractures that occupy a very small portion of the rock volume. We demonstrate that saline tracer experiments combined with single-hole ground penetrating radar (GPR) reflection imaging can be used to monitor saline tracer movement within mm-aperture fractures. A dipole tracer test was performed in a granitic aquifer by injecting a saline solution in a known fracture, while repeatedly acquiring single-hole GPR sections in the pumping borehole located 6 m away. The final depth-migrated difference sections make it possible to identify consistent temporal changes over a 30 m depth interval at locations corresponding to fractures previously imaged in GPR sections acquired under natural flow and tracer-free conditions. The experiment allows determining the dominant flow paths of the injected tracer and the velocity (0.4-0.7 m/min) of the tracer front. Citation: Dorn, C., N. Linde, T. Le Borgne, O. Bour, and L. Baron (2011), Single-hole GPR reflection imaging of solute transport in a granitic aquifer, Geophys. Res. Lett., 38, L08401, doi: 10.1029/2011GL047152.

Kernel-based mapping of orographic rainfall enhancement in the Swiss Alps as detected by weatherradar

In this paper, we develop a data-driven methodology to characterize the likelihood of orographic precipitation enhancement using sequences of weather radar images and a digital elevation model (DEM). Geographical locations with topographic characteristics favorable to enforce repeatable and persistent orographic precipitation such as stationary cells, upslope rainfall enhancement, and repeated convective initiation are detected by analyzing the spatial distribution of a set of precipitation cells extracted from radar imagery. Topographic features such as terrain convexity and gradients computed from the DEM at multiple spatial scales as well as velocity fields estimated from sequences of weather radar images are used as explanatory factors to describe the occurrence of localized precipitation enhancement. The latter is represented as a binary process by defining a threshold on the number of cell occurrences at particular locations. Both two-class and one-class support vector machine classifiers are tested to separate the presumed orographic cells from the nonorographic ones in the space of contributing topographic and flow features. Site-based validation is carried out to estimate realistic generalization skills of the obtained spatial prediction models. Due to the high class separability, the decision function of the classifiers can be interpreted as a likelihood or susceptibility of orographic precipitation enhancement. The developed approach can serve as a basis for refining radar-based quantitative precipitation estimates and short-term forecasts or for generating stochastic precipitation ensembles conditioned on the local topography.