”Public Health Protection through Air Quality Controls”

Health is an important aspect of everybody’s life. Today, there is an increasing recognition and commitment to the pursuit of health both within government and beyond. Any attempt on the part of the " State to protect and promote people’s health, in turn, must be accompanied by effective controls on air quality, as air constitutes ‘ one of the important elements of man’s life and the consequences of air pollution covers a very wide spectrum ranging from material ---damage to personal discomfort and illness. The broad social and economic objectives adumbrated in the Directive Principles of State Policy including the commitment to improve public health underlying in Article 47 and the obligation to preserve and protect-the natural environment cast under Article 48A of the Constitution are being used as versatile weapons by the State to regulate the public health scenario. Preservation and maintenance of air quality is a significant area within the sphere of public health, where the regulatory arm of the law is not adequately touched and in this arena urgent State intervention through legislative and administrative action is called for in the well-being of the society. Judiciary also plays a pivotal role in this arena in the larger interest of the society and for the benefit of the present and future generations. The research study is an attempt to analyze how far the existing legal system, for maintaining air quality and in controlling air pollution, is effective in protecting public health. The study also analyzes the limitations of the control mechanisms. The study focuses on industrial air pollution, indoor and personal air pollution, vehicular pollution and noise pollution which are today appearing as the major public health hazards affecting the air quality. However, this is not to overlook the importance of controls required under other areas of public health.

Microbial quality of shrimp products of export trade produced from aquacultured shrimp

Bacteriological quality of individually quick frozen (IQF) shrimp products produced from aquacultured tiger shrimp (Penaeus monodon) has been analysed in terms of aerobic plate count (APC), coliforms, Escherichia coli, coagulase-positive staphylococci, Salmonella, and Listeria monocytogenes. Eight hundred forty-six samples of raw, peeled, and deveined tail-on (RPTO), 928 samples of cooked, peeled, and deveined tail-on (CPTO), 295 samples of headless, undeveined shell-on (HLSO), and 141 samples of raw, peeled, and deveined tail-off (RPND) shrimps were analysed for the above bacteriological parameters. Salmonella was isolated in only one sample of raw, peeled tail-on. Serotyping of the strain revealed that it was S. typhimurium. While none of the cooked, peeled tail-on shrimp samples exceeded the aerobic plate count (APC) of 105 colony forming units per gram (cfu/g), 2.5% of raw, peeled, tail-on, 6.4% of raw, peeled tail-off, and 7.5% of headless shell-on shrimp samples exceeded that level. Coliforms were detected in all the products, though at a low level. Prevalence of coliforms was higher in headless shell-on (26%) shrimps followed by raw, peeled, and deveined tail-off (19%), raw, peeled tail-on (10%), and cooked, peeled tail-on (3.8%) shrimps. While none of the cooked, peeled tail-on shrimp samples were positive for coagulase-positive staphylococci and E. coli, 0.6–1.3% of the raw, peeled tail-on were positive for staphylococci and E. coli, respectively. Prevalence of staphylococci was highest in raw, peeled tail-off (5%) shrimps and the highest prevalence of E. coli (4.8%) was noticed in headless shell-on shrimps. L. monocytogenes was not detected in any of the cooked, peeled tail-on shrimps. Overall results revealed that the plant under investigation had exerted good process control in order to maintain superior bacteriological quality of their products

“Effect of spice oleoresins in microbial decontamination and their potential application in quality stabilization of Tuna (Euthynnus affinis) during storage”

Unprocessed seafood harbor high number of bacteria, hence are more prone to spoilage. In this circumstance, the use of spice in fish for reduction of microorganism can play an important role in seafood processing. Many essential oils from herbs and spices are used widely in the food, health and personal care industries and are classified as GRAS (Generally regarded as safe) substances or are permitted food additives. A large number of these compounds have been the subject of extensive toxicological scrutiny. However, their principal function is to impart desirable flavours and aromas and not necessarily to act as antimicrobial agents. Given the high flavour and aroma impact to plant essential oils, the future for using these compound as food preservatives lies in the careful selection and evaluation of their efficacy at low concentrations but in combination with other chemical preservatives or preservation processes. For this reason they are worth of study alone or in combination with processing methods in order to establish if they could extend the shelf-life of foods. In this study, the effect of the spices, clove, turmeric, cardamom, oregano, rosemary and garlic in controlling the spoilage and pathogenic bacteria is investigated. Their effect on biogenic amine formation in tuna especially, histamine, as a result of bacterial control is also studied in detail. The contribution of spice oleoresin in the sensory and textural parameters is investigated using textural profile analysis and sensory panel. Finally, the potential of spices in quality stabilization and in increasing the shelf–life of tuna during frozen storage is analysed

Biogeochemical quality assessment of the sediments in Kerala coast

Sediments are the reserve of environmental variation and analysis gives the diverse nature of the environmental chemical pattern. Present attempt provides an insight on the biogeochemistry (BGC) of sediment in selected stations of Kerala coast, India. Sampling along the Kerala coast was done during May – June 2009 in cruise no: 267 of Fishery and Oceanographic Research Vessel, Sagar Sampada. Eleven samples were collected from four stations - Cape, Trivandrum, Kollam and Cochin. Study of organic matter (OM) is significant as it exerts a strong control on the diagenic alterations in the sediment. Samples were analyzed for their Texture; OM- Protein, Carbohydrate, Tannin and lignin, Lipid; Trace metal; Total phosphorus and CHN. Among the eleven analyzed sediment, sample from Cochin station has high clay (>30%) and silt (>40%) content. The rest of the stations showed elevated amount of sand content. Generally the investigation reveals an inverse relation between lipid with other OM- Protein, Carbohydrate, Tannin and lignin. The order of relative distribution of OM were Protein > Carbohydrate > Tannin and Lignin > Lipid. High concentration of trace metal, Fe was found at Kollam and Cochin. Trace metal concentration was directly related to OM distribution. But C/N and Fe/P ratios were inversely related to OM and trace metal.

Praxisrelevante Auswirkungen des Vorschlages für eine EU-Verordnung KOM/2000/7/final, 2000/0212(COD) des europäischen Parlaments und des Rates von der Kommission der Europäischen Gemeinschaften auf die Verkehrsplanung des öffentlichen Personennahverkehrs

Die Arbeit behandelt den Vorschlag für eine EU-Verordnung KOM/2000/7/final, 2000/0212(COD) des europäischen Parlaments und des Rates von der Kommission der Europäischen Gemeinschaften als Grundlage einer Marktöffnungsverordnung und welche Veränderungen sich dadurch in Deutschland einstellen werden. Ausschreibungen von Verkehrsleistungen werden zunehmen. Die Ausschreibungsarten werden sich in ländlichen Regionen von denen in Verkehrszentren unterscheiden. In der Region werden sich Bedarfslösungen stärker durchsetzen. Kürzungen von Verkehrsleistungen werden hier stärker ausfallen als in den Zentren und damit zu einem kleineren Leistungsvolumen führen. Aufgrund des geringen Leistungsumfangs gibt es weniger Interessenten. Bei Standardausschreibungen werden deshalb auch häufig die Varianten der beschränkten oder die freihändige Vergabe gewählt. Funktionale Ausschreibungen haben nur eine untergeordnete Bedeutung. In den Verkehrszentren sind die Lose größer und damit für viele Anbieter interessant. Die Verkehrszusatzleistungen sind zudem komplexer. Standardausschreibungen in öffentlicher Vergabeart werden sich hier vermutlich als Norm durchsetzen. Die VOL/A wird sicherlich ihre Bedeutung und ihren dafür notwendigen Regelungsumfang in Deutschland als deutsches oder als europäisches Recht behalten. Ob der empfehlende Charakter der DIN EN 13816 Norm „ÖPNV: Definition, Festlegung von Leistungszielen und Messung der Servicequalität“ erhalten werden kann und nicht als Steuerungselement zur Standardisierung im ÖPNV beitragen wird, ist dabei zu bezweifeln. Durch diese Wettbewerbspflicht wird der Aufgabenträger zum Besteller von Verkehrsleistungen. Damit geht die Verkehrsplanung in die Verantwortung des Aufgabenträgers über und gerät stärker in den Einflussbereich der Politik. Die strategisch abstrakte und die konkrete Verkehrsplanung wachsen für den Normfall der Standardausschreibung zusammen. Die Hoffnung auf eine bessere Netzintegration und eine Standardisierung des ÖPNV Angebots und der ÖPNV Qualität entsteht. Es entwickelt sich dadurch aber auch die Gefahr der Abhängigkeit des Nahverkehrsangebots von der derzeitigen Haushaltslage oder der Interessenlage der Politik. Kontinuität in Angebot und Qualität werden zu erklärten Planungszielen. Der Verkehrsplaner auf der Bestellerseite muss die Planung in Ausschreibungsunterlagen umsetzen. Dies erfordert erweiterte Kompetenzen in den Bereichen Betriebswirtschaft, Logistik, Jura, Informatik und Führungskompetenzen. Ausbildende Institutionen müssen darauf bereits im Vorfeld der Umsetzung reagieren. Durch die zeitliche Verzögerung der Umsetzung der Planung durch die Ausschreibungsschritte sind in der Verkehrsplanung längere Planungsvorlaufzeiten einzukalkulieren. Vorausschauender zu planen, wird dabei wichtiger. Auch eventuelle Fehler in der Planung sind nicht mehr so einfach zu korrigieren. Durch den gestiegenen Einsatz von Technologien in den Fahrzeugen besteht für den Verkehrsplaner dafür häufiger die Möglichkeit, Planungsänderungen auf ihre Wirksamkeit im Hinblick auf Attraktivität für den Fahrgast anhand von den ermittelten Fahrgastzahlen zu kontrollieren. Dasselbe gilt auch für Marketing- und Vertriebsmaßnahmen, wie für die Tarifpolitik. Die Zahlen stehen nicht nur für diese Rückkopplung zur Verfügung, sondern dienen auch als Planungsgrundlage für zukünftige Maßnahmen. Dem Planer stehen konkretere Zahlen für die Planung zur Verfügung. Ein Aspekt, der aufgrund der Sanktionsmaßnahmen bei Ausschreibungen an Bedeutung gewinnen wird, ist die Möglichkeit, Qualität von Verkehrsleistungen möglichst objektiv beurteilen zu können. Praxisrelevante Auswirkungen auf die Verkehrsplanung des öffentlichen Personennahverkehrs ergeben sich hauptsächlich durch die gestiegene Komplexität in der Planung selbst und den dadurch unverzichtbaren gewordenen Einsatz von Computerunterstützung. Die Umsetzung in Ausschreibungsunterlagen der Planung und die Kontrolle stellen neue Elemente im Aufgabenbereich des Verkehrsplaners dar und erfordern damit breiter ausgelegte Kernkompetenzen. Es werden mehr Verkehrsplaner mit breiterer Ausbildung benötigt werden. Diese Arbeit hat aufgezeigt, dass sich mit der Integration des Ausschreibungsgedankens in den Ablauf der Verkehrsplanung eine sprunghafte Entwicklung in der Planungstätigkeit ergeben wird. Aufgrund der in Zukunft steigenden Qualität und Quantität der Planungsgrundlagen und der ebenfalls gestiegenen Ansprüche an die Bewertungsparameter ergeben sich Veränderungen und neue Anforderungen auf diesem Gebiet, die in erster Linie für die Hochschulen und andere ausbildende Einrichtungen, aber auch für die Verkehrsplanung unterstützende Industrie.

Effects of manure quality and application forms on soil C and N turnover of a subtropical oasis soil under laboratory conditions

Our knowledge of the agricultural sustainability of the millennia-old mountain oases in northern Oman is restricted in particular with respect to C and N turnover. A laboratory study was conducted (1) to analyse the effects of rewetting and drying on soil microorganisms after adding different manures, (2) to investigate the effects of mulching or incorporating of these manures, and (3) to evaluate the relationships between C and N mineralisation rates and manure quality indices. During the first 9-day rewetting and drying cycle, i.e. the “mulch” period, the content of extractable organic C decreased by approximately 40% in all four treatments. During the second 9-day rewetting and drying cycle, i.e. the “incorporation” period, this fraction decreased insignificantly in almost all treatments. The control and mature manure treatments form the first pair with a low percentage of total organic C evolved as CO2 (0.3% in 18 days) and a considerable percentage of total N mineralised as NH4 and NO3 (1% in 18 days), the fresh and immature manure treatments form the second pair with a higher amount of total organic C evolved as CO2 (0.5% in 18 days) and no net N mineralisation. During the first 9-day rewetting and drying cycle, the contents of microbial biomass C and biomass N increased by approximately 150% in all four treatments. During the second 9-day rewetting and drying cycle, no further increase was observed in the control and immature manure treatments and a roughly 30% increase in the other two treatments.

Einfluss der Führung des Trocknungsprozesses auf den Trocknungsverlauf und die Produkteigenschaften empfindlicher biologischer Güter

Die Konvektionstrocknung ist eine der ältesten Methoden zur Konservierung von Lebensmitteln. Es ist bekannt, dass Agrarprodukte temperaturempfindlich sind. Bei Überhitzung erleiden sie chemische und physikalische Veränderungen, die ihre Qualität vermindern. In der industriellen Praxis wird die Konvektionstrocknung in der Regel auf Grundlage empirisch ermittelter Werte durchgeführt, welche die Produkttemperatur nicht berücksichtigen. Es ist deshalb nicht sichergestellt, ob der Prozess optimal oder auch nur gut betrieben wird. Inhalt dieser Arbeit ist ein Vergleich der klassischen einstufigen Konvektionstrocknung mit einer Prozessführungsstrategie bei der die Produkttemperatur als Regelgröße eingeführt wird. Anhand der Untersuchung des Trocknungsverhaltens von Äpfeln werden die beiden Verfahren analysiert, die erhaltenen Ergebnisse miteinander verglichen und daraus optimierte Trocknungsbedingungen abgeleitet. Die für dieses Projekt entwickelte Prozessanlage erlaubt die simultane Untersuchung sämtlicher wesentlicher Temperaturen, der Gewichtsveränderung und der optischen Qualitätskriterien. Gleichzeitig ist es möglich, entweder die Lufttemperatur oder die Temperatur des Produktes zur regeln, während die jeweils andere Größe als Messwert erfasst wird. Es kann weiterhin zwischen Durch- und Überströmung gewählt werden.

Quality oriented drying of Lemon Balm (Melissa officinalis L.)

Heilkräuter sind während des Trocknungsprozesses zahlreichen Einflüssen ausgesetzt, welche die Qualität des Endproduktes entscheidend beeinflussen. Diese Forschungsarbeit beschäftigt sich mit der Trocknung von Zitronenmelisse (Melissa officinalis .L) zu einem qualitativ hochwertigen Endprodukt. Es werden Strategien zur Trocknung vorgeschlagen, die experimentelle und mathematische Aspekte mit einbeziehen, um bei einer adäquaten Produktivität die erforderlichen Qualitätsmerkmale im Hinblick auf Farbeänderung und Gehalt an ätherischen Ölen zu erzielen. Getrocknete Zitronenmelisse kann zurzeit, auf Grund verschiedener Probleme beim Trocknungsvorgang, den hohen Qualitätsanforderungen des Marktes nicht immer genügen. Es gibt keine standardisierten Informationen zu den einzelnen und komplexen Trocknungsparametern. In der Praxis beruht die Trocknung auf Erfahrungswerten, bzw. werden Vorgehensweisen bei der Trocknung anderer Pflanzen kopiert, und oftmals ist die Trocknung nicht reproduzierbar, oder beruht auf subjektiven Annäherungen. Als Folge dieser nicht angepassten Wahl der Trocknungsparameter entstehen oftmals Probleme wie eine Übertrocknung, was zu erhöhten Bruchverlusten der Blattmasse führt, oder eine zu geringe Trocknung, was wiederum einen zu hohen Endfeuchtegehalt im Produkt zur Folge hat. Dies wiederum mündet zwangsläufig in einer nicht vertretbaren Farbänderung und einen übermäßigen Verlust an ätherischen Ölen. Auf Grund der unterschiedlichen thermischen und mechanischen Eigenschaften von Blättern und Stängel, ist eine ungleichmäßige Trocknung die Regel. Es wird außerdem eine unnötig lange Trocknungsdauer beobachtet, die zu einem erhöhten Energieverbrauch führt. Das Trocknen in solaren Tunneln Trocknern bringt folgendes Problem mit sich: wegen des ungeregelten Strahlungseinfalles ist es schwierig die Trocknungstemperatur zu regulieren. Ebenso beeinflusst die Strahlung die Farbe des Produktes auf Grund von photochemischen Reaktionen. Zusätzlich erzeugen die hohen Schwankungen der Strahlung, der Temperatur und der Luftfeuchtigkeit instabile Bedingungen für eine gleichmäßige und kontrollierbare Trocknung. In Anbetracht der erwähnten Probleme werden folgende Forschungsschwerpunkte in dieser Arbeit gesetzt: neue Strategien zur Verbesserung der Qualität werden entwickelt, mit dem Ziel die Trocknungszeit und den Energieverbrauch zu verringern. Um eine Methodik vorzuschlagen, die auf optimalen Trocknungsparameter beruht, wurden Temperatur und Luftfeuchtigkeit als Variable in Abhängigkeit der Trocknungszeit, des ätherischer Ölgehaltes, der Farbänderung und der erforderliche Energie betrachtet. Außerdem wurden die genannten Parametern und deren Auswirkungen auf die Qualitätsmerkmale in solaren Tunnel Trocknern analysiert. Um diese Ziele zu erreichen, wurden unterschiedliche Ansätze verfolgt. Die Sorption-Isothermen und die Trocknungskinetik von Zitronenmelisse und deren entsprechende Anpassung an verschiedene mathematische Modelle wurden erarbeitet. Ebenso wurde eine alternative gestaffelte Trocknung in gestufte Schritte vorgenommen, um die Qualität des Endproduktes zu erhöhen und gleichzeitig den Gesamtenergieverbrauch zu senken. Zusätzlich wurde ein statistischer Versuchsplan nach der CCD-Methode (Central Composite Design) und der RSM-Methode (Response Surface Methodology) vorgeschlagen, um die gewünschten Qualitätsmerkmalen und den notwendigen Energieeinsatz in Abhängigkeit von Lufttemperatur und Luftfeuchtigkeit zu erzielen. Anhand der gewonnenen Daten wurden Regressionsmodelle erzeugt, und das Verhalten des Trocknungsverfahrens wurde beschrieben. Schließlich wurde eine statistische DOE-Versuchsplanung (design of experiments) angewandt, um den Einfluss der Parameter auf die zu erzielende Produktqualität in einem solaren Tunnel Trockner zu bewerten. Die Wirkungen der Beschattung, der Lage im Tunnel, des Befüllungsgrades und der Luftgeschwindigkeit auf Trocknungszeit, Farbänderung und dem Gehalt an ätherischem Öl, wurde analysiert. Ebenso wurden entsprechende Regressionsmodelle bei der Anwendung in solaren Tunneltrocknern erarbeitet. Die wesentlichen Ergebnisse werden in Bezug auf optimale Trocknungsparameter in Bezug auf Qualität und Energieverbrauch analysiert.

Perspectives of Urban Growth Management and Sustainable Development In West Bank, Hebron District as a case Study

The main objective of this PhD research study is to provide a perspective on the urban growth management and sustainable development in Palestine, and more specifically in Hebron district as a case study. Hebron is located 36 km south of Jerusalem, with an overall population size of around 600,000 people living in a total area around1246km2. Hebron is the biggest Palestinian district that has 16 municipalities and 154 localities. The research discusses and analyzes the urban planning system, economical and environmental policies and the solution required to manage and integrate the development elements to develop a sustainable development plan for Hebron. The research provides answers for fundamental questions such as what kind and definition of sustainable development are applicable to the Palestinian case?. What are the sustainability problems there and how the Israeli occupation and unstable political condition affect the sustainable development in Palestine? What are the urban growth management and sustainability policies and actions required from government, public and privets sector in Palestine? The fast urban growth in Palestine is facing many problems and challenges due to the increase in the population size and the resulting impact of this increase including, but not limited to, the demand of new houses, need for more infrastructure services, demands on new industrial, commercial, educational and health projects, which in turn reduces the area of agricultural lands and threatens the natural resources and environment. There are also other associated sustainability problems like the absence of effective plans or regulations that control urban expansion, the absence of sufficient sustainable development plans at the national levels for the district, new job requirements, Israeli restrictions and occupation for more than 60 years, existence of construction factories near residential areas, poor public awareness and poor governmental funds for service projects and development plans. The study consists of nine chapters. Chapter One includes an introduction, study objectives, problems and justifications, while Chapter Two has a theoretical background on sustainability topic and definitions of sustainability. The Palestinian urban planning laws and local government systems are discussed in Chapter Three and the methodology of research is detailed in Chapter Four. As for Chapter Five, it provides a general background on Hebron District including demographical and economical profiles, along with recommendations related to sustainable development for each profile Chapter Six addresses the urban environment, sustainability priorities and policies required. Chapter Seven discusses and analyzes infrastructure services including transportation, water and wastewater. As for Chapter Eight, it addresses the land use, housing and urban expansion beside the cultural heritage, natural heritage with relevant sustainable development polices and recommendations. Finally, Chapter Nine includes a conclusion and comprehensive recommendations integrating all of urban and sustainability event in one map. Hebron has a deep history including a rich cultural heritage aged by thousands of years, with 47% of Hebron district population under 14 years old. Being the biggest Palestinian district, Hebron has thousands of industrial and economical organizations beside a large agricultural sector at Palestine level. This gives Hebron a potential to play major roles in developing a national sustainability plan, as the current urban planning system in Palestine needs urgent reform and development to fulfill the sustainability requirement. The municipalities and ministers should find permanent financial aid for urban planning and development studies so as to face future challenges. The Palestinian government can benefit from available local human resources in development projects; hence Palestinian people have sufficient qualifications in most sectors. The Palestinian people also can invest in the privet sector in Palestine in case businessmen have been encouraged and clear investment laws and plans have been developed. The study provides recommendations associated to the sustainable development in Palestine in general and Hebron, as a case study, in specific. Recommendations include increasing the privet sector as well as the public involvement in urban growth management, and stopping unplanned urban expansion, subjecting granting building permits of new projects to the no-harm environmental impact assessment, increasing the coordination and cooperation between localities and central bodies, protection and renovation of old cites and green areas, increasing the quality and quantity of infrastructure services, establishing district urban planning department to coordinate and organize urban planning and sustainable development activities. Also, among recommendations come dividing Hebron into three planning and administrative areas (north, central and south), and dividing the sustainable development and implementation period (2010 to 2025) into three main phases. Finally, the study strongly recommends benefiting from the same urban development plans in similar districts at national and international levels, also to use new technologies and information systems in urban planning process.

Evaluation of water retention capacity and flood control function of the forest catchment

This research quantitatively evaluates the water retention capacity and flood control function of the forest catchments by using hydrological data of the large flood events which happened after the serious droughts. The objective sites are the Oodo Dam and the Sameura Dam catchments in Japan. The kinematic wave model, which considers saturated and unsaturated sub-surface soil zones, is used for the rainfall-runoff analysis. The result shows that possible storage volume of the Oodo Dam catchment is 162.26 MCM in 2005, while that of Samerua is 102.83 MCM in 2005 and 102.64 MCM in 2007. Flood control function of the Oodo Dam catchment is 173 mm in water depth in 2005, while the Sameura Dam catchment 114 mm in 2005 and 126 mm in 2007. This indicates that the Oodo Dam catchment has more than twice as big water capacity as its capacity (78.4 mm), while the Sameura Dam catchment has about one-fifth of the its storage capacity (693 mm).

Understanding Recreational Services of Urban Riverfront Space for Planning Purposes

In the process of urbanization, natural and semi-natural landscapes are increasingly cherished as open space and recreational resource. Urban rivers are part of this kind of resource and thus play an important role in managing urban resilience and health. Employing the example of Tianjin, this doctoral dissertation research aims at learning to understand how to plan and design for the interface zones between urban water courses and for the land areas adjacent to such water courses. This research also aims at learning how to link waterfront space with other urban space in order to make a recreational space system for the benefit of people. Five questions of this dissertation are: 1) what is the role of rivers in spatial and open space planning? 2) What are the human needs regarding outdoor open space? 3) How do river and water front spatial structures affect people's recreational activities? 4) How to define the recreational service of urban river and waterfront open space? 5) How might answering these question change planning and design of urban open space? Quantitative and qualitative empirical approaches were combined in this study for which literature review and theoretical explorations provide the basis. Empirical investigations were conducted in the city of Tianjin. The quantitative approach includes conducting 267 quantitative interviews, and the qualitative approach includes carrying out field observations and mappings. GIS served to support analysis and visualization of empirical information that was generated through this study. By responding to the five research questions, findings and lessons include the following: 1) In the course of time rivers have gained importance in all levels and scales of spatial planning and decision making. Regarding the development of ecological networks, mainly at national scale, rivers are considered significant linear elements. Regarding regional and comprehensive development, river basins and watersheds are often considered as the structural link for strategic ecological, economic, social and recreational planning. For purposes of urban planning, particularly regarding recreational services in cities, the distribution of urban open spaces often follows the structure of river systems. 2) For the purpose of classifying human recreational needs that relate to outdoor open space Maslow's hierarchy of human needs serves as theoretical basis. The classes include geographical, safety, physiological, social and aesthetic need. These classes serve as references while analyzing river and waterfront open space and other kinds of open space. 3) Regarding the question how river and waterfront spatial structures might affect people's recreational activities, eight different landscape units were identified and compared in the case study area. Considering the thermal conditions of Tianjin, one of these landscape units was identified as affording the optimal spatial arrangement which mostly meets recreational needs. The size and the shape of open space, and the plants present in an open space have been observed as being most relevant regarding recreational activities. 4) Regarding the recreational service of urban river and waterfront open space the results of this research suggest that the recreational service is felt less intensively as the distances between water 183 front and open space user’s places of residence are increasing. As a method for estimating this ‘Service Distance Effect’ the following formula may be used: Y = a*ebx. In this equation Y means the ‘Service Distance’ between homes and open space, and X means the percentage of the people who live within this service distance. Coefficient "a" represents the distance of the residential area nearest to the water front. The coefficient "b" is a comprehensive capability index that refers to the size of the available and suitable recreational area. 5) Answers found to the questions above have implications for the planning and design of urban open space. The results from the quantitative study of recreational services of waterfront open space were applied to the assessment of river-based open space systems. It is recommended that such assessments might be done employing the network analysis function available with any GIS. In addition, several practical planning and designing suggestions are made that would help remedy any insufficient base for satisfying recreational needs. The understanding of recreational need is considered helpful for the proposing planning and designing ideas and for the changing of urban landscapes. In the course of time Tianjin's urban water system has shrunk considerably. At the same time rivers and water courses have shaped Tianjin's urban structure in noticeable ways. In the process of urbanization water has become increasingly important to the citizens and their everyday recreations. Much needs to be changed in order to improve recreational opportunities and to better provide for a livable city, most importantly when considering the increasing number of old people. Suggestions made that are based on results of this study, might be implemented in Tianjin. They are 1) to promote the quality of the waterfront open space and to make all linear waterfront area accessible recreational spaces. Then, 2), it is advisable to advocate the concept of green streets and to combine green streets with river open space in order to form an everyday recreational network. And 3) any sound urban everyday recreational service made cannot rely on only urban rivers; the whole urban structure needs to be improved, including adding small open space and optimize the form of urban communities, finally producing a multi-functional urban recreational network.

Planning Urban Food Production into Today's Cities

If cities are to become more sustainable and resilient to change it is likely that they will have to engage with food at increasingly localised levels, in order to reduce their dependency on global systems. With 87 percent of people in developed regions estimated to be living in cities by 2050 it can be assumed that the majority of this localised production will occur in and around cities. As part of a 12 month engagement, Queen’s University Belfast designed and implemented an elevated aquaponic food system spanning the top internal floor and exterior roof space of a disused mill in Manchester, England. The experimental aquaponic system was developed to explore the possibilities and difficulties associated with integrating food production with existing buildings. This paper utilises empirical research regarding crop growth from the elevated aquaponic system and extrapolates the findings across a whole city. The resulting research enables the agricultural productive capacity of today’s cities to be estimated and a framework of implementation to be proposed.

Effects of shoot pruning and inflorescence thinning on plant growth, yield and fruit quality of greenhouse tomatoes in a tropical climate

The combined effects of shoot pruning (one or two stems) and inflorescence thinning (five or ten flowers per inflorescence) on greenhouse tomato yield and fruit quality were studied during the dry season (DS) and rainy season (RS) in Central Thailand. Poor fruit set, development of undersized (mostly parthenocarpic) fruits, as well as the physiological disorders blossom-end rot (BER) and fruit cracking (FC) turned out to be the prevailing causes deteriorating fruit yield and quality. The proportion of marketable fruits was less than 10% in the RS and around 65% in the DS. In both seasons, total yield was significantly increased when plants were cultivated with two stems, resulting in higher marketable yields only in the DS. While the fraction of undersized fruits was increased in both seasons when plants were grown with a secondary stem, the proportions of BER and FC were significantly reduced. Restricting the number of flowers per inflorescence invariably resulted in reduced total yield. However, in neither season did fruit load considerably affect quantity or proportion of the marketable yield fraction. Inflorescence thinning tended to promote BER and FC, an effect which was only significant for BER in the RS. In conclusion, for greenhouse tomato production under climate conditions as they are prevalent in Central Thailand, the cultivation with two stems appears to be highly recommendable whereas the measures to control fruit load tested in this study did not proof to be advisable.

KAM: Automatic Planning and Interpretation of Numerical Experiments Using Geometrical Methods

KAM is a computer program that can automatically plan, monitor, and interpret numerical experiments with Hamiltonian systems with two degrees of freedom. The program has recently helped solve an open problem in hydrodynamics. Unlike other approaches to qualitative reasoning about physical system dynamics, KAM embodies a significant amount of knowledge about nonlinear dynamics. KAM's ability to control numerical experiments arises from the fact that it not only produces pictures for us to see, but also looks at (sic---in its mind's eye) the pictures it draws to guide its own actions. KAM is organized in three semantic levels: orbit recognition, phase space searching, and parameter space searching. Within each level spatial properties and relationships that are not explicitly represented in the initial representation are extracted by applying three operations ---(1) aggregation, (2) partition, and (3) classification--- iteratively.

Coordinating Inventory Control and Pricing Strategies with Random Demand and Fixed Ordering Cost: The Finite Horizon Case

We analyze a finite horizon, single product, periodic review model in which pricing and production/inventory decisions are made simultaneously. Demands in different periods are random variables that are independent of each other and their distributions depend on the product price. Pricing and ordering decisions are made at the beginning of each period and all shortages are backlogged. Ordering cost includes both a fixed cost and a variable cost proportional to the amount ordered. The objective is to find an inventory policy and a pricing strategy maximizing expected profit over the finite horizon. We show that when the demand model is additive, the profit-to-go functions are k-concave and hence an (s,S,p) policy is optimal. In such a policy, the period inventory is managed based on the classical (s,S) policy and price is determined based on the inventory position at the beginning of each period. For more general demand functions, i.e., multiplicative plus additive functions, we demonstrate that the profit-to-go function is not necessarily k-concave and an (s,S,p) policy is not necessarily optimal. We introduce a new concept, the symmetric k-concave functions and apply it to provide a characterization of the optimal policy.