An assessment of handling and processing methods used for the shrimp fishery by-catch in Kalpitiya, Sri Lanka

The by-catch from the shrimp trawl fishery in Kalpitiya is mainly used for the production of dried fish, which provides an additional source of income for fishermen in the area. It has been observed that current handling practices along the value addition chain are responsible for the poor quality and low price of the end product. This study was aimed at identifying the shortcomings in such handling practices by fishermen and dried fish producers and assessing the quality of shrimp fishery by-catch along the processing chain in order to recommend more efficient utilization methods that will improve the quality of the end product. Fresh fish, dried fish and harbour water samples were tested for total coli forms, faecal coliforms, E. coli and Salmonella in order to assess their microbial quality: In addition, standard plate counts (SPC) of fish samples were also carried out. A survey was carried out from July-October 2006 at Kalpitiya, using a pre-tested questionnaire to collect information from individuals who have been engaged in dried fish processing. Average values obtained for freshly landed and dried fish respectively, were, SPC 9.88x10 super(5) CFU/g and 30.43x10 super(5) CFU/g, total coliforms 23.05 and 24.23 MPN/g and fecal coliforms 8.28 and 9.00 MPN/g. These values exceed the recommendations in the SL standards. A quarter of the landed fresh fish and 38% of dried fish from the producers were positive for E. coli and thus failed to show required end product quality. SPC of harbour water was 14.35x10 super(6) CFU/ml and all samples were found to be contaminated with E. coli. None of the fishermen and dried fish producers were satisfied with the quality of the end product. The reasons for poor quality as indicated by them were: limited availability of ice (75%), lack of infrastructure facilities (65%), uncertainty of markets (52%), lack of emphasis on quality (47%) and poor access to available technologies (41%). Respondents to the questionnaire also identified: unavailability of potable water, insulated boxes, good landing jetty, racks for drying fish, poor cold storage facilities and limitations in dried fish storage facilities, as further factors leading to the loss of quality in their products. Results demonstrate that improvements to the infrastructure facilities and conducting of proper awareness programmes on handling practices could lead for improvements in the quality of value added products prepared from the shrimp fishery by-catch at Kalpitiya.

Assessment of the efficacy of Myanmar's shark reserves

A formal evaluation of the reserves efficacy was undertaken using an adapted version of the Philippines Marine Protected Area (MPA) Management Effectiveness Assessment Tool (MEAT). This report details the results and major findings of the evaluation

Dispersion, population dynamics and stock assessment of Caspian Sea prawns, genus Palaemon in Guilan Province coastal waters

Biological aspects, population dynamics and stock assessment of the Caspian Sea prawns Palaemon adspersus and Palaemon eleganse were investigated in Guilan coastal water of the Caspian Sea. Sampling was done monthly with a bottom trawl with mesh size of 3 mm in cod end in 0 - 5 m and 5 - 10 m depth in areas as Astra, Shafa Roud, Anzali, Chonchanan Chamkhaleh and Chaboksar during year 2002. Results of one year sampling showed that mean total length of Palaemon adspersus (pooled data) was 39.9±6.84 mm (X±SD) and mean wiegth was 1.133±0.67 g. The mean total length of females and males was 41.6±7.5 mm and 37.9±5.2 mm respectively and mean weight for the mentioned sexes was 1.353±0.65 g and 0.868±0.38 g respectively. There was significant differences in mean length and weight of females and males (P<0.05). The mean total annual sex ratio of males: females for this species was 1.4 and this sex ratio deviated significantly from 1:1 (X2, P<0.05) and biased towards males in the population of this species. The spawning season of Palaemon adspersus begins in April and ends in September with a peak in June . Mean fecundity of this species was 1994.5 ± 506.6 . The growth coefficients Loo and K for females were estimated as 58.5 mm and 2.3 /Year and for males as 55.9 mm and 2.6 /year respectively . The mean CPUA ( catch / Km2 ) for this species was 9.99 ± 33.2 kg / km2 and the correspondance biomass was calculated as 5067.7 kg in 0 - 10 m depth . The mean total length of Palaemon elegans (pooled data ) was 27.5 ± 5.7 mm (X±S.D) and mm and 24.01±4.18 mm respectively and mean weight for the mentioned sexes were was 0.553 ± 0.3 g and 0.237±0.15 g respectively. There was significant differences in mean length and weight of females and males (P<0.05). The mean total annual sex ratio of males:females for this species was 0.57 and in this species also sex ratio differed significantly from 1:1 (X2, P<0.05) and skewed towards females in the population of this species. The spawning season of Palaemon elegans extended from May to September with a peak in July . Mean fecundity of this species was 642.7±313.4. The growth coefficients LOO and K for females were estimated as 42.119 mm and 2.40 /Year and 33.87 mm and 2.50 /year for males respectively. The mean. CPUA ( catch/ Km2 ) for this species was 0.75±3.86 kg/km2 and the correspondance biomass was calculated as 382.1 kg in 0-10 m depth .

Socio-economic impact assessment of the shark fishing ban in Maldives

Three years after a shark ban was imposed this study assesses the socio-economic impact on the former fisherfolk.

Population dynamic and stock assessment of lobster resources of Cha-bahar region (with particular ref. to Panulirus homarus)

Amoungst the three spiny lobster species in southern Iranian waters, Panulirus homarus is the only commercial species with a total landings of 20-45 tons per year indicating a decrease in both landings and CPIJE in recent years. Fishing has been regulated according to the no. of fisherman and effort, and trap ha's replaced the gillnef since 1994. Fishing is carried out along the rocky shores of Chah-Bahar region through different landing places by local fisherman for a period of about two months. Most of catch is exported mainly frozen. This research was sposored by the Fisheries Research Dept. and aimed to work on the population dynamics and stock assessment in order to stablish a better understandings of the stock and hence a proper management in this region. Sampling was done for. 10 successive months in _5 major landing places from 1994 to 1995 with no sampling during the monsoon period through June to July. Althogethere, 8500 specimen were collected and the biometry was done accordings to the sex, region and month. Average total length, total weight and carapace length was obtained 216mm., 452 gr. and 75mm. respectively. Total length-weight relationship of both sexes was calculated and follows the cubic law. Regression coefficients for both sexes was 2.8231, males 2.9616, total females 2.7490, berried females 2.6611- and non-berried females

Assessment of the performance of beach management units (BMUs) on Lakes Victoria, Albert, Kyoga and George

Until the late 1990s the fisheries of Ugandan lakes had been managed by government where stakeholders were excluded from the decision-making process. In order to involve other stakeholders, co-management was adopted. Operationalising Co-management on landing sites has led to the formation of BMUs at gazetted landing sites. A BMU is made up of a BMU assembly and the BMU committee that it elects. A BMU committee should be: 30% boat owners; 30% boat barias 30% including fish processors, boat makers, local gear makers and repairers, fishing input dealers and managers and 10% fish mongers/traders; and if possible, 30% women. To operate at a particular landing site, one must be registered with the BMU. The BMU assembly is the supreme organ of a BMU empowered to elect, approve and remove the BMU committee

An analysis of factors improving technology roadmap credibility: A communications theory assessment of roadmapping processes

In recent years, many industrial firms have been able to use roadmapping as an effective process methodology for projecting future technology and for coordinating technology planning and strategy. Firms potentially realize a number of benefits in deploying technology roadmapping (TRM) processes. Roadmaps provide information identifying which new technologies will meet firms' future product demands, allowing companies to leverage R&D investments through choosing appropriately out of a range of alternative technologies. Moreover, the roadmapping process serves an important communication tool helping to bring about consensus among roadmap developers, as well as between participants brought in during the development process, who may communicate their understanding of shared corporate goals through the roadmap. However, there are few conceptual accounts or case studies have made the argument that roadmapping processes may be used effectively as communication tools. This paper, therefore, seeks to elaborate a theoretical foundation for identifying the factors that must be considered in setting up a roadmap and for analyzing the effect of these factors on technology roadmap credibility as perceived by its users. Based on the survey results of 120 different R&D units, this empirical study found that firms need to explore further how they can enable frequent interactions between the TRM development team and TRM participants. A high level of interaction will improve the credibility of a TRM, with communication channels selected by the organization also positively affecting TRM credibility. © 2011 Elsevier Inc.

An assessment of the blast resistance of sandwich beams

An assessment of the underwater blast resistance of sandwich beams with a prismatic Y-truss core is presented, utilizing three-dimensional finite element calculations. Results show a significant performance benefit for sandwich construction when compared to a monolithic plate of the same mass when the sandwich core combines high shear strength with low compressive strength.

Redundancy quantification in the safety assessment of existing concrete beam-and-slab bridges

In current practice the strength evaluation of a bridge system is typically based on firstly using elastic analysis to determine the distribution of load effects in the elements and then checking the ultimate section capacity of those elements. Ductility of the components in most bridge structures permits local yield and subsequent redistribution of the applied loads from the most heavily loaded elements. As a result a bridge can continue to carry additional loading even after one member has yielded, which has conventionally been adopted as the "failure criterion" in bridge strength evaluation. This means that a bridge with inherent redundancy has additional reserves of strength such that the failure of one element does not result in the failure of the complete system. For these bridges warning signs will show up and measures can be undertaken before the ultimate collapse is happening. This paper proposes a rational methodology for calculating the ultimate system strength and including in bridge evaluation the warning level due to redundancy. © 2004 Taylor & Francis Group, London.

Assessment of computational fluid dynamics and experimental data for shock boundary-layer interactions

A workshop on the computational fluid dynamics (CFD) prediction of shock boundary-layer interactions (SBLIs) was held at the 48th AIAA Aerospace Sciences Meeting. As part of the workshop, numerous CFD analysts submitted solutions to four experimentally measured SBLIs. This paper describes the assessment of the CFD predictions. The assessment includes an uncertainty analysis of the experimental data, the definition of an error metric, and the application of that metric to the CFD solutions. The CFD solutions provided very similar levels of error and, in general, it was difficult to discern clear trends in the data. For the Reynolds-averaged Navier-Stokes (RANS) methods, the choice of turbulence model appeared to be the largest factor in solution accuracy. Scale-resolving methods, such as large-eddy simulation (LES), hybrid RANS/LES, and direct numerical simulation, produced error levels similar to RANS methods but provided superior predictions of normal stresses. Copyright © 2012 by Daniella E. Raveh and Michael Iovnovich.

Assessment of visibility restriction mechanisms for RFID data Discovery Services

RFID is a technology that enables the automated capture of observations of uniquely identified physical objects as they move through supply chains. Discovery Services provide links to repositories that have traceability information about specific physical objects. Each supply chain party publishes records to a Discovery Service to create such links and also specifies access control policies to restrict who has visibility of link information, since it is commercially sensitive and could reveal inventory levels, flow patterns, trading relationships, etc. The requirement of being able to share information on a need-to-know basis, e.g. within the specific chain of custody of an individual object, poses a particular challenge for authorization and access control, because in many supply chain situations the information owner might not have sufficient knowledge about all the companies who should be authorized to view the information, because the path taken by an individual physical object only emerges over time, rather than being fully pre-determined at the time of manufacture. This led us to consider novel approaches to delegate trust and to control access to information. This paper presents an assessment of visibility restriction mechanisms for Discovery Services capable of handling emergent object paths. We compare three approaches: enumerated access control (EAC), chain-of-communication tokens (CCT), and chain-of-trust assertions (CTA). A cost model was developed to estimate the additional cost of restricting visibility in a baseline traceability system and the estimates were used to compare the approaches and to discuss the trade-offs. © 2012 IEEE.

A priori assessment of algebraic flame surface density models in the context of large eddy simulation for nonunity lewis number flames in the thin reaction zones regime

The performance of algebraic flame surface density (FSD) models has been assessed for flames with nonunity Lewis number (Le) in the thin reaction zones regime, using a direct numerical simulation (DNS) database of freely propagating turbulent premixed flames with Le ranging from 0.34 to 1.2. The focus is on algebraic FSD models based on a power-law approach, and the effects of Lewis number on the fractal dimension D and inner cut-off scale η i have been studied in detail. It has been found that D is strongly affected by Lewis number and increases significantly with decreasing Le. By contrast, η i remains close to the laminar flame thermal thickness for all values of Le considered here. A parameterisation of D is proposed such that the effects of Lewis number are explicitly accounted for. The new parameterisation is used to propose a new algebraic model for FSD. The performance of the new model is assessed with respect to results for the generalised FSD obtained from explicitly LES-filtered DNS data. It has been found that the performance of the most existing models deteriorates with decreasing Lewis number, while the newly proposed model is found to perform as well or better than the most existing algebraic models for FSD. © 2012 Mohit Katragadda et al.