Fabrication technology and applications of fiber Bragg gratings

In this thesis theoretical and technological aspects of fiber Bragg gratings (FBG) are considered. The fabrication of uniform and chirped fiber Bragg gratings using phase mask technique has been exploited throughout this study. Different requires of FBG inscription were considered and implemented experimentally to find economical and effective procedure. The hydrogen loading was used as a method for enhancement the photosensitivity of the fiber. The minimum loading time for uniform and chirped fiber Bragg gratings was determined as 3 days and 7 days at T = 50°C and hydrogen pressure 140 bar, respectively. The post-inscription annealing was considered to avoid excess losses induced by the hydrogen. The wavelength evolution during annealing was measured. The strain and temperature sensor application of FBG was considered. The wavelength shifts caused by tension and temperature were studied for both uniform and chirp fiber Bragg gratings.

Clustering and international competitiveness of information technology industry in the Saint Petersburg area

The main objective of this study is to assess the potential of the information technology industry in the Saint Petersburg area to become one of the new key industries in the Russian economy. To achieve this objective, the study analyzes especially the international competitiveness of the industry and the conditions for clustering. Russia is currently heavily dependent on its natural resources, which are the main source of its recent economic growth. In order to achieve good long-term economic performance, Russia needs diversification in its well-performing industries in addition to the ones operating in the field of natural resources. The Russian government has acknowledged this and started special initiatives to promote such other industries as information technology and nanotechnology. An interesting industry that is basically less than 20 years old and fast growing in Russia, is information technology. Information technology activities and markets are mainly concentrated in Russia’s two biggest cities, Moscow and Saint Petersburg, and areas around them. The information technology industry in the Saint Petersburg area, although smaller than Moscow, is especially dynamic and is gaining increasing foreign company presence. However, the industry is not yet internationally competitive as it lacks substantial and sustainable competitive advantages. The industry is also merely a potential global information technology cluster, as it lacks the competitive edge and a wide supplier and manufacturing base and other related parts of the whole information technology value system. Alone, the industry will not become a key industry in Russia, but it will, on the other hand, have an important supporting role for the development of other industries. The information technology market in the Saint Petersburg area is already large and if more tightly integrated to Moscow, they will together form a huge and still growing market sufficient for most companies operating in Russia currently and in the future. Therefore, the potential of information technology inside Russia is immense.

Marketing in support of sales in industrial high technology company

The aim of this study is to find out how Metso Paper’s marketing could better support sales and how sales people are executing marketing during the sales processes. This study is done from sales people’s point of view. The study is limited to cover only company’s internal environment. This research was executed through literature review and qualitative theme interviews, where 20 of Metso Paper’s sales people were interviewed. The interviewees were asked to tell their opinions about marketing’s support, marketing materials, information and the relationship between sales and marketing. The results of this study show that the relationship between marketing and sales is rather good, but there is still a great need for improvements. It is hoped that marketing would take more part in the selling processes. In addition, more information about the launches and schedules were also hoped for. Marketing is told to be quite Finland centric and sales people are wishing for more adopted marketing materials and occasions. It came up during the interviews, that sales people are not so willing to give regular feedback to marketing and quite often they think that marketing’s role in Metso Paper is not important at all.

Handover aspects in Unlicensed Mobile Access Technology

Fixed Mobile Convergence is the recent buzz in the field of telecommunication technology. Unlicensed Mobile Access (UMA) technology is a realistic implementation of Fixed Mobile Convergence. UMA involves communication between different types of networks. Handover is a very important issue in UMA. The study is an analysis of theoretical handover mechanism and practical test results. It includes a new proposal for handover performance test in UMA. It also provides an overview of basic handover operation on different scenarios in UMA. The practical test involves an experiment on handover performance test using network analyzers. The new proposal provides a different approach for an experimental setting on handover performance test without using network analyzers. The approach is not be implemented because of some technical problem in a network equipment in UMA. The analysis of the test results reveals that time of handover between UMA and Global System for Mobile Communication (GSM) network is similar to time of handover between inter base station controller (BSC) handover in GSM networks. The new approach is simple and provides measurement at the end point communicating entities. The study gives a general understanding of handover operation, an analysis of handover performance in UMA and specifically provides a new approach useful for further study of handover in different real world environments and scenarios.

Content and Language Integration as a part of a degree reform at Tampere University of Technology

Tampere University of Technology is undergoing a degree reform that started in 2013. One of the major changes in the reform was the integration of compulsory Finnish, Swedish and English language courses to substance courses at the bachelor level. The integration of content and language courses aims at higher quality language learning, more fluency in studies, and increased motivation toward language studies. In addition, integration is an opportunity to optimize the use of resources and to offer courses that are more tailored to the students' field of study and to the skills needed in working life. The reform also aims to increase and develop co-operation between different departments at the university and to develop scientific follow up. This paper gives an overview of the integration process conducted at TUT and gives examples of adjunct CLIL implementations in three different languages.

Population ageing and ICT: An exploratory review of technology innovation trough digital applications

The multidimensional process of physical, psychological, and social change produced by population ageing affects not only the quality of life of elderly people but also of our societies. Some dimensions of population ageing grow and expand over time (e.g. knowledge of the world events, or experience in particular situations), while others decline (e.g. reaction time, physical and psychological strength, or other functional abilities like reduced speed and tiredness). Information and Communication Technologies (ICTs) can help elderly to overcome possible limitations due to ageing. As a particular case, biometrics can allow the development of new algorithms for early detection of cognitive impairments, by processing continuous speech, handwriting or other challenged abilities. Among all possibilities, digital applications (Apps) for mobile phones or tablets can allow the dissemination of such tools. In this article, after presenting and discussing the process of population ageing and its social implications, we explore how ICTs through different Apps can lead to new solutions for facing this major demographic challenge.

Control remoto del robot ABB IRB 120 por tecnología Wifi

Durante toda la evolución de la tecnología, se han empleado aparatos interconexionados por cables. Los cables limitan la libertad de movimiento del usuario y pueden captar interferencias entre ellos si la red de cableado es elevada. Mientras avanzaba la tecnología inalámbrica, se ha ido adaptando al equipamiento electrónico a la vez que se iban haciendo cada vez más pequeños. Por esto, se impone la necesidad de utilizarlos como controles a distancia sin el empleo de cables debido a los inconvenientes que estos conllevan. El presente trabajo, pretende unificar tres tecnologías que pueden tener en el futuro una gran afinidad. · Dispositivos basados en el sistema Android. Desde sus inicios, han tenido una evolución meteórica. Se han ido haciendo cada vez más rápidos y mejores. · Sistemas inalámbricos. Los sistemas wifi o bluetooth, se han ido incorporando a nuestras vidas cada vez más y están prácticamente en cualquier aparato. · Robótica. Cualquier proceso de producción incorpora un robot. Son necesarios para hacer muchos trabajos que, aunque el hombre lo puede realizar, un robot reduce los tiempos y la peligrosidad de los procesos. Aunque las dos primeras tecnologías van unidas, ¿quién no tiene un teléfono con conexión wifi y bluetooth?, pocos diseños aúnan estos campos con la Robótica. El objetivo final de este trabajo es realizar una aplicación en Android para el control remoto de un robot, empleando el sistema de comunicación inalámbrico. La aplicación desarrollada, permite controlar el robot a conveniencia del usuario en un entorno táctil/teledirigido. Gracias a la utilización de simulador en ambos lenguajes (RAPID y Android), ha sido posible realizar la programación sin tener que estar presente ante el robot objeto de este trabajo. A través de su progreso, se ha ido evolucionando en la cantidad de datos enviados al robot y complejidad en su procesamiento, a la vez que se ha mejorado en la estética de la aplicación. Finalmente se usó la aplicación desarrollada con el robot, consiguiendo con éxito que realizara los movimientos que eran enviados con la tablet programada.

The learning about imaging diagnosis technology

Objective To investigate the learning about management of the technology (efficient use, acquisition and maintenance of imaging diagnosis equipment) in the radiology residency program of Escola Paulista de Medicina - Universidade Federal de São Paulo, with a view to improving the education of radiologists. Materials and Methods Exploratory research where residents, faculty staff and tutors of the program were quantitative and qualitatively approached with Likert scale questionnaires (46), and deepening with recorded interviews (18) and categorization based upon meaning units (thematic analysis). Results Among the participants, 66% agreed that they had the opportunity of learning about the use of radiological equipment; for 61% the program should include knowledge on the importance of acquiring equipment; and 72% emphasized the lack of learning about equipment management and maintenance. Conclusion As the major moment in the education of specialists, the medical residency program provides residents with a favorable environment to the learning of the skills required to the future of their professional practice, but with limited emphasis on the management of the technology: efficient use, acquisition and mainly maintenance of equipment, still poorly explored. Both the investigated program and the medical residency in radiology should incorporate, whenever possible, the commitment with the training in supplementary skills related to equipment management, developing the competence of the future radiologists.

A Virtual Laboratory Structure for Developing Programming Labs

Virtual Laboratories are an indispensablespace for developing practical activities in a Virtual Environment. In the field of Computer and Software Engineering different types of practical activities have tobe performed in order to obtain basic competences which are impossible to achieve by other means. This paper specifies an ontology for a general virtual laboratory.The proposed ontology provides a mechanism to select the best resources needed in a Virtual Laboratory once a specific practical activity has been defined and the maincompetences that students have to achieve in the learning process have been fixed. Furthermore, the proposed ontology can be used to develop an automatic and wizardtool that creates a Moodle Classroom using the practical activity specification and the related competences.

Towards automated specifications of scenarios in enhanced learning technology

Recent standardization efforts in e-learning technology have resulted in a number of specifications, however, the automation process that is considered essential in a learning management system (LMS) is a lessexplored one. As learning technology becomes more widespread and more heterogeneous, there is a growing need to specify processes that cross the boundaries of a single LMS or learning resource repository. This article proposes to obtain a specification orientated to automation that takes on board the heterogeneity of systems and formats and provides a language for specifying complex and generic interactions. Having this goal in mind, a technique based on three steps is suggested. The semantic conformance profiles, the business process management (BPM) diagram, and its translation into the business process execution language (BPEL) seem to be suitable for achieving it.

Technology Catching-up and the Role of Institutions

The aim of the paper is to investigate the role played by differences in Institutional Quality on the process of technology catch-up across countries. Empirical evidence shows how countries endowed with better institutions are those experiencing higher TFP growth rates, faster rates of technology adoption and hence being those more rapidly closing the gap with the frontier. Conversely, countries lacking some minimum institutional level are shown to diverge in the long run and not to catch-up. Some institutions, however, play an ambiguous role in the creation and adoption of technology. We find that the tightening of Intellectual Property Rights reduces the ability of followers to freely imitate technology slowing down their catchup rate. This negative effect is stronger the farther the countriesare found from the frontier. Other institutional categories such as openness to trade, instead, benefit both leaders and followers.