NUTRITIONAL STATUS AND DRY MASS PRODUCTION OF ALFALFA IN FUNCTION OF POTASSIUM RATES IN TWO SOILS

Potassium fertilization is very important to alfalfa crop in terms of yield, quality and persistence of forage, especially on soils naturally poor K. Thus, to assess the effects of K fertilization in alfalfa production and nutritional status, was carried out an experiment in a greenhouse using samples of a Dystrophic Oxisol medium texture (LV) (0.6 mmol(c) dm(-3) K) and a Dystrophic Ultisol sandy/medium texture (PVA) (2.2 mmol(c) dm(-3) K). A completely randomized design in a factorial arrangement 6 x 2 (six K rates and two soils) was used, with four replications. The K rates used were: 0, 25, 50, 100, 150 and 200 mg kg(-1) K. Potassium fertilization increased K content in soil and shoots. Dry matter production was increased with the K addition. However, in the PVA, this occurred only in the second cut. In LV, potassium fertilization increased N concentration in alfalfa shoots in both cuts. Plants with K concentration around 10 g kg(-1) had typical symptoms of this nutrient deficiency. The K critical levels of K in soil and shoots were 1.8 mmolc dm(-3) and 16.7 g kg(-1), respectively.

MORPHOGENESIS AND PRODUCTION OF TANZANIA, MOMBACA AND MULATO GRASSES UNDER NITROGEN FERTILIZATION

A field trial was conducted designed in a completely randomized block in a 4 x 3 factorial arrangement to evaluate the application of nitrogen doses (N) (0, 40, 80 and 160 kg/ha) on the morphogenical characteristics and dry matter partition of three forage grasses (Panicum maximum cvs. Mombasa and Tanzania and Brachiaria sp. Hybrid Mulato). The leaf appearance (LAR, leaf/day) and stretching (LER; mm/day) rates, the number of green leaves per tiller (NLT) and the average weight of tillers (MTW; g) presented s positive linear response to the N dose while the phyllochron (Phil; day/leaves) showed a negative linear response. The highest LER, IAL and final leaf length (FLL; cm) occurred in the Mombaca and Tanzania grasses, while the highest LAR occurred in the Mulato grass. There was a negative quadratic effect of the N dose on the stem elongation rate (SER; mm/day) and LF. The Mombaca and Tanzania grasses presented the highest SER; however, in just two forages. The production of total dry matter (TDM; kg/ha), leaves (LDM; kg/ha) and stems (SDM; kg/ha) increased linearly and quadratically with the N dose, respectively, for the Mombaca and Tanzania grasses. There was a high positive correlation among DM, LDM and SDM and the Mombaca grass MTW. The dry matter production and morphogenic characteristics were influenced by the nitrogen fertilization as a result of the substantial increase in the flow of tissues stimulated by fertilization, proving the importance of N for forage biomass accumulation.

CONTRIBUTION OF BASAL AND AERIAL TILLERS IN DYNAMICS OF HERBAGE PRODUCTION OF SIGNALGRASS AFTER GRAZING DEFERRED

During the spring, the understanding of regrowth in basal and aerial tillers of deferred pasture in winter it is necessary. Thus, the objective was to evaluate the morphogenesis and herbage accumulation during spring in Brachiaria decumbens cv. Basilisk (signalgrass) pasture used under deferred grazing in winter. The basal and aerial tillers in same pasture were evaluated. The signalgrass was managed with grazing cattle and with an average height of 25 cm. The randomized block design with three replications was adopted. The leaf appearance rate, phyllochron and the numbers of expanded, expanding and live leaves did not differ between basal and aerial tillers. The aerial tiller possessed lower rates of leaf senescence, of leaf elongation and of stem elongation, as well as lower number of dead leaf and stem and leaf lamina lengths, compared to basal tiller. The leaf lifespan was higher in aerial tillers than at basal. The basal tiller also contributed to higher rates of tissue growth and forage accumulation in pasture when compared to aerial tiller. After deferred grazing during the spring, the aerial tiller has low participation in forage production of signalgrass pasture.

Assessment of fungi in soils of sugarcane crops and their potential for production of biomass-degrading enzymes

Soil management practices are konwn to affect the biomass and enzyme activities of microbial soil communities. To assess whether burning of sugarcane prior to harvesting affects the community of soilborne fungi, we collected soil simples in two sites: burned sugarcane culture prior harvesting (BS) and non-burned sugarcane culture (NBS). A total of 75 filamentous fungal isolates were recovered from soils in both sites. Trichoderma was the most prevalent genus in both sites, followed by Fusarium, Cunninghamella and Aspergillus. The Sorensen's index (0.60) suggested a slight difference in fungi associated with both areas, with high number of fungal isolates found on BB soil. The abundance of Trichoderma isolates in NBS soil was higher than BS soil; however, the abundance of Fusarium, Aspergillus and Cunninghamella was higher in the latter type of soil. In addition, fungi isolated from BS soil showed the highest production of xylanase and laccase in comparision with fungi isolated form NBS soil. Our results indicate that the different types of sugarcane harvesting apparently did not interfere with the diversity of fungal communnities as revealed by culture-dependent methods. In addition, our data indicates the potencial of fungi from soils of sugarcane crops to produce relevant enzymes related to biomass conversion.

Fibrolytic enzyme production of Myceliophthora thermophila M.7.7. using inexpensive carbon sources and mineral nutrients

This study investigated the effect of inexpensive carbon and nitrogen sources on enzyme production by Myceliophthora thermophila M.7.7 in solid-state fermentation. Three kinds of lignocellulosic waste (corn straw, sugarcane bagasse and sugarcane straw) and six nitrogen sources (urea, calcium nitrate, analytical ammonium sulphate, yeast extract, agricultural fertilizer NPK 20-05-20 and fertilizing grade ammonium sulphate) were tested. Some physical-chermical parameters of the fermentation, such as temperature, initial pH and moisture content of the substrate on enzyme production, were evoluated. The maximum activities of xylanase (446.9 U/ml) endoglucanase (94.7 U/ml) and beta-glucosidase (2.8 U/ml) were observed in a mixture of corn straw and wheat bran (1:1 w/w) as the carbon source using fertilizer grade ammonium sulphate as the nitrogen source. This production occurred for an incubation period of 96 h, at 40°C, with initial moisture content of 70% and pH 5.0. These results have significant interest since they could be used for the future production of enzymes in a low-cost industrial process.

Production of β-(1,3)-glucanases by Trichoderma harzianum Rifai: Optimization and Application to Produce Gluco-oligosaccharides from Paramylon and Pustulan

β-(1→3)-Glucanases were produced by Trichoderma harzianum Rifai PAMB-86 cultivated on botryosphaeran in a bench-fermenter and optimised by the response surface method. Maximal enzyme titres occurred at 5 days, initial pH 5.5 and aeration of 1.5vvm. β-(1→3)-The β-glucanolytic enzyme complex produced by T. harzianum Rifai PAMB- 86 was fractionated by gel filtration into 2 fractions (F-I, F-II), and employed to produce gluco-oligosaccharides from algal paramylon ((1→3)-β-D-glucan) and lichen pustulan ((1→6)-β-D-glucan). Both enzymes attacked paramylon to the extent of ~15-20% in 30 min releasing glucose and laminaribiose as major end-products, and laminarioligosaccharides of degree of polymerization (DP) ≥3. Only F-I degraded pustulan resulting in ~2% degradation at 30 min, with glucose, gentiobiose and gentio-oligosaccharides of DP ≥4 as major products. The difference in the nature of the hydrolysis products can be explained by the substrate specificities of each enzyme fraction, and the structural differences of the β-D-glucans attacked.

Mechanical strain induces the production of spheroid mineralized microparticles in the aortic valve through a RhoA/ROCK-dependent mechanism

Calcific aortic valve disease (CAVD) is a chronic disorder characterized by an abnormal mineralization of the leaflets, which is accelerated in bicuspid aortic valve (BAV). It is suspected that mechanical strain may promote/enhance mineralization of the aortic valve. However, the effect of mechanical strain and the involved pathways during mineralization of the aortic valve remains largely unknown. Valve interstitial cells (VICs) were isolated and studied under strain conditions. Human bicuspid aortic valves were examined as a model relevant to increase mechanical strain. Cyclic strain increased mineralization of VICs by several-fold. Scanning electron microscope (SEM) and energy dispersive X-ray (EDX) analyses revealed that mechanical strain promoted the formation of mineralized spheroid microparticles, which coalesced into larger structure at the surface of apoptotic VICs. Apoptosis and mineralization were closely associated with expression of ENPP1. Inhibition of ENPP1 greatly reduced mineralization of VIC cultures. Through several lines of evidence we showed that mechanical strain promoted the export of ENPP1-containing vesicles to the plasma membrane through a RhoA/ROCK pathway. Studies conducted in human BAV revealed the presence of spheroid mineralized structures along with the expression of ENPP1 in areas of high mechanical strain. Mechanical strain promotes the production and accumulation of spheroid mineralized microparticles by VICs, which may represent one important underlying mechanism involved in aortic valve mineralization. RhoA/ROCK-mediated export of ENPP1 to the plasma membrane promotes strain-induced mineralization of VICs.

Production of active recombinant eIF5A: reconstitution in E. coli of eukaryotic hypusine modification of eIF5A by its coexpression with modifying enzymes

Eukaryotic translation initiation factor 5A (eIF5A) is the only cellular protein that contains the polyamine-modified lysine, hypusine [Nε-(4-amino-2-hydroxybutyl)lysine]. Hypusine occurs only in eukaryotes and certain archaea, but not in eubacteria. It is formed post-translationally by two consecutive enzymatic reactions catalyzed by deoxyhypusine synthase (DHS) and deoxyhypusine hydroxylase (DOHH). Hypusine modification is essential for the activity of eIF5A and for eukaryotic cell proliferation. eIF5A binds to the ribosome and stimulates translation in a hypusine-dependent manner, but its mode of action in translation is not well understood. Since quantities of highly pure hypusine-modified eIF5A is desired for structural studies as well as for determination of its binding sites on the ribosome, we have used a polycistronic vector, pST39, to express eIF5A alone, or to co-express human eIF5A-1 with DHS or with both DHS and DOHH in Escherichia coli cells, to engineer recombinant proteins, unmodified eIF5A, deoxyhypusine- or hypusine-modified eIF5A. We have accomplished production of three different forms of recombinant eIF5A in high quantity and purity. The recombinant hypusine-modified eIF5A was as active in methionyl-puromycin synthesis as the native, eIF5A (hypusine form) purified from mammalian tissue. The recombinant eIF5A proteins will be useful tools in future structure/function and the mechanism studies in translation.

Economic aspects of production of Caiman crocodilus yacare

The breeding of crocodilians is still a recent activity in Brazil. Its peak was in the 1990's, but it has gaps in its production, as there are no norms for the commercial breeding of these animals in captivity. However, its economic potential is great, and the search for ecological balance and viability of commercial production has become a challenge among farmers of this activity. Therefor, the objective of the study was to economically analyze the production of Caiman crocodilus yacare on a farm located in Caceres, state of Mato Grosso, identifying relevant items of costs in the activity, as well as the parameters related to the profitability and viability of the activity. The economic results for the breeding of this animal were positive, with profitability ratios higher than 70%.

Effect of prey concentrations and feed training on production of Hoplias lacerdae juvenile

The aim of this work was to investigate the s of daily prey concentration during the first 15 days of active feeding of Hoplias lacerdae larvae, and the juvenile size on the feed training. In the first phase, the larvae received five Artemia nauplii concentrations (P). In the second phase, the juveniles from each treatment were trained to accept formulated diet. Superior growth was related to higher initial daily prey concentrations (900 and 1100 nauplii larvae-1). During feed training, the growth tendency was similar to that verified in the first phase. The lowest values of specific growth rate (SGR) were registered after the introduction of the semi-moist diet used in the feed training. However, the values of SGR recovered along the experiment and similar rates were found among the treatments. Survival, mortality and cannibalism were similar in the different treatments at the end of both phases. It can be concluded that: the prey concentration affects growth of H. lacerdae during the first 15 days of active feeding, and feed training can be initialized with juveniles of about 16 mm of total length.

Quantification of ruminal microbiota and production of methane and carbonic dioxide from diets with inclusion of glycerin

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Thermophilic fungi as new sources for production of cellulases and xylanases with potential use in sugarcane bagasse saccharification

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Differential cross section measurements for the production of a W boson in association with jets in proton-proton collisions at √s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Paradoxical effects of bovine somatotropin treatment on the ovarian follicular population and in vitro embryo production of lactating buffalo donors submitted to ovum pick-up

The aim of the present study was to evaluate the effect of bovine somatotropin (bST; 500 mg) administration on lactating buffalo donors submitted to two different ovum pick-up (OPU) and in vitro embryo production schemes with a 7 or 14 d intersession OPU interval. A total of 16 lactating buffalo cows were randomly assigned into one of four experimental groups according to the bST treatment (bST or No-bST) and the OPU intersession interval (7 or 14 d) in a 2 x 2 factorial design (16 weeks of OPU sessions). The females submitted to OPU every 14d had a larger (P < 0.001) number of ovarian follicles suitable for puncture (15.6 +/- 0.7 vs. 12.8 +/- 0.4) and an increased (P = 0.004) number of cumulus-oocyte complexes (COCs) recovered (10.0 +/- 0.5 vs. 8.5 +/- 0.3) compared to the 7 d interval group. However, a 7 or 14 d interval between OPU sessions had no effect (P = 0.34) on the number of blastocysts produced per OPU (1.0 +/- 0.1 vs. 13 +/- 0.2, respectively). In addition, bST treatment increased (P < 0.001) the number of ovarian follicles suitable for puncture (15.3 +/- 0.5 vs. 12.1 +/- 0.4) but reduced the percentage (18.9% vs. 10.9%; P = 0.009) and the number (1.4 +/- 0.2 vs. 0.8 +/- 0.1; P = 0.003) of blastocysts produced per OPU session compared with the non-bST-treated buffaloes. In conclusion, the 14d interval between OPU sessions and bST treatment efficiently increased the number of ovarian follicles suitable for puncture. However, the OPU session interval had no effect on embryo production, and bST treatment reduced the in vitro blastocyst outcomes in lactating buffalo donors.

Production of particleboards with bamboo (Dendrocalamus giganteus) reinforcement

The focus of this research was to study the utilization of residues from bamboo (Dendrocalamus giganteus) lamination in the manufacturing of panels for structural purposes. Bamboo particleboards were produced under three conditions: pure boards, reinforced with bamboo laminas, and with treated particles. Castor oil-based polyurethane was the resin binder, in view of using lower toxicity materials. The mechanical tests were performed according to Brazilian Standard (NBR) 14810-3 (2006) and European Standard (EN) 310 (2000). The results were superior to those recommended by these and other standards for internal adhesion resistance, modulus of rupture, and elasticity in static bending, as well as to the results of other studies. Starch treatment was an unnecessary stage. According to the conditions of this process, the studied panels showed a good potential for construction use. Moreover, the bamboo particleboards are an economically viable, environmentally friendly, and sustainable alternative for the use of waste generated during the processing of Dendrocalamus giganteus bamboo species, allied with castor oil-based polyurethane resin. The reinforced particleboard and its production process are being licensed as an Innovation Patent in Brazil, (BR 1020130133919-1-2013).