Gas, water and volume characteristics during controlled degassing experiments on ODP Leg 164 PCS cores

A pressurized core with CH4 hydrate or dissolved CH4 should evolve gas volumes in a predictable manner as pressure is released over time at isothermal conditions. Incremental gas volumes were collected as pressure was released over time from 29 pressure core sampler (PCS) cores from Sites 994, 995, 996, and 997 on the Blake Ridge. Most of these cores were kept at or near 0ºC with an ice bath, and many of these cores yielded substantial quantities of CH4. Volume-pressure plots were constructed for 20 of these cores. Only five plots conform to expected volume and pressure changes for sediment cores with CH4 hydrate under initial pressure and temperature conditions. However, other evidence suggests that sediment in these five and at least five other PCS cores contained CH4 hydrate before core recovery and gas release. Detection of CH4 hydrate in a pressurized sediment core through volume-pressure relationships is complicated by two factors. First, significant quantities of CH4-poor borehole water fill the PCS and come into contact with the core. This leads to dilution of CH4 concentration in interstitial water and, in many cases, decomposition of CH4 hydrate before a degassing experiment begins. Second, degassing experiments were conducted after the PCS had equilibrated in an ice-water bath (0ºC). This temperature is significantly lower than in situ values in the sediment formation before core recovery. Our results and interpretations for PCS cores collected on Leg 164 imply that pressurized containers formerly used by the Deep Sea Drilling Project (DSDP) and currently used by ODP are not appropriately designed for direct detection of gas hydrate in sediment at in situ conditions through volume-pressure relationships.

Theranostic Fibers for Simultaneous Imaging and Drug Delivery

New methods for creating theranostic systems with simultaneous encapsulation of therapeutic, diagnostic, and targeting agents are much sought after. This work reports for the first time the use of coaxial electrospinning to prepare such systems in the form of core–shell fibers. Eudragit S100 was used to form the shell of the fibers, while the core comprised poly(ethylene oxide) loaded with the magnetic resonance contrast agent Gd(DTPA) (Gd(III) diethylenetriaminepentaacetate hydrate) and indomethacin as a model therapeutic agent. The fibers had linear cylindrical morphologies with clear core–shell structures, as demonstrated by electron microscopy. X-ray diffraction and differential scanning calorimetry proved that both indomethacin and Gd(DTPA) were present in the fibers in the amorphous physical form. This is thought to be a result of intermolecular interactions between the different components, the presence of which was suggested by infrared spectroscopy. In vitro dissolution tests indicated that the fibers could provide targeted release of the active ingredients through a combined mechanism of erosion and diffusion. The proton relaxivities for Gd(DTPA) released from the fibers into tris buffer increased (r1 = 4.79–9.75 s–1 mM–1; r2 = 7.98–14.22 s–1 mM–1) compared with fresh Gd(DTPA) (r1 = 4.13 s–1 mM–1 and r2 = 4.40 s–1 mM–1), which proved that electrospinning has not diminished the contrast properties of the complex. The new systems reported herein thus offer a new platform for delivering therapeutic and imaging agents simultaneously to the colon.

Intrinsically flexible electronic materials for smart device applications

A novel method to fabricate chemically linked conducting polymer–biopolymer composites that are intrinsically flexible and conducting for functional electrode applications is presented. Polypyrrole was synthesised in situ during the cellulose regeneration process using the 1-butyl-3-methylimidazolium chloride ionic liquid as a solvent medium. The obtained polypyrrole–cellulose composite was chemically blended and showed flexible polymer properties while retaining the electronic properties of a conducting polymer. Addition of an ionic liquid such as trihexyl(tetradecyl)phosphonium bis(trifluoromethylsulfonyl)imide, enhanced the flexibility of the composite. The functional application of these materials in the electrochemically controlled release of a model drug has been demonstrated. This strategy opens up a new design for a wide spectrum of materials for smart electronic device applications wherein the functionality of doping and de-doping of conducting polymers is retained and their processability issue is addressed by exploiting an ionic liquid route.

Stimuli-Responsive Microneedle Arrays For On-Demand Drug Delivery

Pulsatile, or “on-demand”, delivery systems have the capability to deliver a therapeutic molecule at the right time/site of action and in the right amount (1). Pulsatile delivery systems present multiple benefits over conventional dosage forms and provide higher patient compliance. The combination of stimuli-responsive materials with the drug delivery capabilities of hydrogel-forming MN arrays (2) opens an interesting area of research. In the present work we describe, a stimuli-responsive hydrogel-forming microneedle (MN) array that enable delivery of a clinically-relevant model drug (ibuprofen) upon application of UV radiation (Figure 1A). MN arrays were prepared using a micromolding technique using a polymer prepared from 2-hydroxyethyl methacrylate (HEMA) and ethylene glycol dimethacrylate (EGDMA) (Figure 1B). The arrays were loaded with up to 5% (w/w) ibuprofen included in a light-responsible conjugate (3,5-dimethoxybenzoin conjugate) (2). The presence of the conjugate inside the MN arrays was confirmed by Raman spectroscopy measurements. MN arrays were tested in vitro showing that they were able to deliver up to three doses of 50 mg of ibuprofen after application of an optical trigger (wavelength of 365 nm) over a long period of time (up to 160 hours) (Figure 1C and 1D). The work presented here is a probe of concept and a modified version of the system should be used as UV radiation is shown to be the major etiologic agent in the development of skin cancers. Consequently, for future applications of this technology an alternative design should be developed. Based on the previous research dealing with hydrogel forming MN arrays a suitable strategy will be to use hydrogel-forming MN arrays containing a backing layer made with the material described in this work as the drug reservoir (2). Finally, a porous layer of a material that blocks UV radiation should be included between the MN array and the drug reservoir. Therefore radiation can be applied to the system without reaching the skin surface. Therefore after modification, the system described here interesting properties as “on-demand” release system for prolonged periods of time. This technology has potential for use in “on-demand” delivery of a wide range of drugs in a variety of applications relevant to enhanced patient care.

Effect of intravenous haloperidol on the duration of delirium and coma in critically ill patients (Hope-ICU):A randomised, double-blind, placebo-controlled trial

Background: Delirium is frequently diagnosed in critically ill patients and is associated with poor clinical outcomes. Haloperidol is the most commonly used drug for delirium despite little evidence of its effectiveness. The aim of this study was to establish whether early treatment with haloperidol would decrease the time that survivors of critical illness spent in delirium or coma. Methods: We did this double-blind, placebo-controlled randomised trial in a general adult intensive care unit (ICU). Critically ill patients (≥18 years) needing mechanical ventilation within 72 h of admission were enrolled. Patients were randomised (by an independent nurse, in 1:1 ratio, with permuted block size of four and six, using a centralised, secure web-based randomisation service) to receive haloperidol 2·5 mg or 0·9% saline placebo intravenously every 8 h, irrespective of coma or delirium status. Study drug was discontinued on ICU discharge, once delirium-free and coma-free for 2 consecutive days, or after a maximum of 14 days of treatment, whichever came first. Delirium was assessed using the confusion assessment method for the ICU (CAM-ICU). The primary outcome was delirium-free and coma-free days, defined as the number of days in the first 14 days after randomisation during which the patient was alive without delirium and not in coma from any cause. Patients who died within the 14 day study period were recorded as having 0 days free of delirium and coma. ICU clinical and research staff and patients were masked to treatment throughout the study. Analyses were by intention to treat. This trial is registered with the International Standard Randomised Controlled Trial Registry, number ISRCTN83567338. Findings: 142 patients were randomised, 141 were included in the final analysis (71 haloperidol, 70 placebo). Patients in the haloperidol group spent about the same number of days alive, without delirium, and without coma as did patients in the placebo group (median 5 days [IQR 0-10] vs 6 days [0-11] days; p=0·53). The most common adverse events were oversedation (11 patients in the haloperidol group vs six in the placebo group) and QTc prolongation (seven patients in the haloperidol group vs six in the placebo group). No patient had a serious adverse event related to the study drug. Interpretation: These results do not support the hypothesis that haloperidol modifies duration of delirium in critically ill patients. Although haloperidol can be used safely in this population of patients, pending the results of trials in progress, the use of intravenous haloperidol should be reserved for short-term management of acute agitation. Funding: National Institute for Health Research. © 2013 Elsevier Ltd.

A critical appraisal of clinical trials conducted and subsequent drug approvals in India and South Africa

Objectives: To assess the relation between the number of clinical trials conducted and respective new drug approvals in India and South Africa. Design: Construction and analysis of a comprehensive database of completed randomised controlled clinical trials based on clinicaltrials.gov from 1 January 2005 to 31 December 2010 and drug approval data from 2006 until 2013 for India and South Africa. Setting: USA, the EU, India and South Africa. Main outcome measures: Percentage of completed randomised clinical trials for an Investigational Medicinal Product (IMP) leading to new drug approval in India and South Africa. Results: A total of 622 eligible randomised controlled trials were identified as per search criteria for India and South Africa. Clustering them for the same sponsor and the same Investigational New Drug (IND) resulted in 453 eligible trials, that is, 224 for India and 229 for South Africa. The distribution of the market application approvals between the EU/USA as well as India and South Africa revealed that out of clinical trials with the participation of test centres in India and/or South Africa, 39.6% (India) clinical trials and 60.1% (South Africa) clinical trials led to market authorisation in the EU/USA without a New Drug Application (NDA) approval in India or South Africa. Conclusions: Despite an increase in clinical trial activities, there is a clear gap between the number of trials conducted and market availability of these new drugs in India and South Africa. Drug regulatory authorities, investigators, institutional review boards and patient groups should direct their efforts to ensuring availability of new drugs in the market that have been tested and researched on their population.

Medication reconciliation at patient admission: a randomized controlled trial

Objective: To measure length of hospital stay (LHS) in patients receiving medication reconciliation. Secondary characteristics included analysis of number of preadmission medications, medications prescribed at admission, number of discrepancies, and pharmacists interventions done and accepted by the attending physician. Methods: A 6 month, randomized, controlled trial conducted at a public teaching hospital in southern Brazil. Patients admitted to general wards were randomized to receive usual care or medication reconciliation, performed within the first 72 hours of hospital admission. Results: The randomization process assigned 68 patients to UC and 65 to MR. LHS was 10±15 days in usual care and 9±16 days in medication reconciliation (p=0.620). The total number of discrepancies was 327 in the medication reconciliation group, comprising 52.6% of unintentional discrepancies. Physicians accepted approximately 75.0% of the interventions. Conclusion: These results highlight weakness at patient transition care levels in a public teaching hospital. LHS, the primary outcome, should be further investigated in larger studies. Medication reconciliation was well accepted by physicians and it is a useful tool to find and correct discrepancies, minimizing the risk of adverse drug events and improving patient safety.

Development of polymeric drug delivery vehicles for targeted cancer therapy

The aim of my Ph. D. thesis is to generalize a method for targeted anti-cancer drug delivery. Hydrophilic polymer-drug conjugates involve complicated synthesis; drug-encapsulated polymeric nanoparticles limit the loading capability of payloads. This thesis introduces the concept of nanoconjugates to overcome difficulties in synthesis and formulation. Drugs with hydroxyl group are able to initiate polyester synthesis in a regio- and chemo- selective way, with the mediation of ligand-tunable Zinc catalyst. Herein, three anti-cancer drugs are presented to demonstrate the high efficiency and selectivity in the method (Chapter 2-4). The obtained particles are stable in salt solution, releasing drugs over weeks in controlled manner. With the conjugation of aptamer, particles are capable to target prostate cancer cells in vitro. These results open the gateway to evaluate the in vivo efficacy of nanoconjugates for target cancer therapy (Chapter 5). Mechanism study of the polymerization leads to the discovery of chemosite selective synthesis of prodrugs with acrylate functional groups. Functional copolymer-drug conjugates will expand the scope of nanoconjugates (Chapter 6). Liposome-aptamer targeting drug delivery vehicle is well studied to achieve reversible cell-specific delivery of non-hydoxyl drugs e.g. cisplatin (Chapter 7). New monomers and polymerization mechanisms are explored for polyester in order to synthesize nanoconjugates with variety on properties (Chapter 8). Initial efforts to apply this type of prodrugs will be focused on the preparation of hydrogels for stem cell research (Chapter 9).

Protein encapsulation and release from PEO-b-polyphosphoester templated calcium carbonate particles

International audience

In vitro studies of drug transformations: application to forensic toxicology

The forensic toxicologist faces challenges in the detection of drugs and poisons in biological samples due to transformations which occur both during life and after death. For example, changes can result from drug metabolism during life or from the use of formalin solution for post mortem embalming purposes. The former requires the identification of drug metabolites and the latter the identification of chemical reaction products in order to know which substances had been administered. The work described in this thesis was aimed at providing ways of tackling these challenges and was divided into two parts. Part 1 investigated the use of in vitro drug metabolism by human liver microsomes (HLM) to obtain information on drug metabolites and Part 2 investigated the chemical reactions of drugs and a carbamate pesticide with formalin solution and formalin-blood. The initial aim of part I was to develop an in vitro metabolism method using HLM, based on a literature review of previous studies of this type. MDMA was chosen as a model compound to develop the HLM method because its metabolism was known and standards of its metabolites were commercially available. In addition, a sensitive and selective method was developed for the identification and quantitation of hydrophilic phase I drug metabolites using LC/MS/MS with a conventional reverse-phase (C18) column. In order to obtain suitable retention factors for polar drug metabolites on this column, acetyl derivatives were evaluated for converting the metabolites to more lipophilic compounds and an optimal separation system was developed. Acetate derivatives were found to be stable in the HPLC mobile phase and to provide good chromatographic separation of the target analytes. In vitro metabolism of MDMA and, subsequently, of other drugs involved incubation of 4 µg drug substance in pH 7.4 buffer with an NADPH generating system (NGS) at 37oC for 90 min with addition of more NGS after 30 min. The reaction was stopped at 90 min by the addition of acetonitrile before extraction of the metabolites. Acetate derivatives of MDMA metabolites were identified by LC/MS/MS using multiple reaction monitoring (MRM). Three phase I metabolites (both major and minor metabolites) of MDMA were detected in HLM samples. 3,4-dihydroxy-methamphetamine and 4-hydroxy-3-methoxymethamphetamine were found to be major metabolites of MDMA whereas 3,4-methylenedioxyamphetamine was found to be a minor metabolite. Subsequently, ten MDMA positive urines were analysed to compare the metabolite patterns with those produced by HLM. An LC/MS method for MDMA and its metabolites in urine samples was developed and validated. The method demonstrated good linearity, accuracy and precision and insignificant matrix effects, with limits of quantitation of 0.025 µg/ml. Moreover, derivatives of MDMA and its metabolites were quantified in all 10 positive human urine samples. The urine metabolite pattern was found to be similar to that from HLM. The second aim of Part 1 was to use the HLM system to study the metabolism of some new psychoactive substances, whose misuse worldwide has necessitated the development of analytical methods for these drugs in biological specimens. Methylone and butylone were selected as representative cathinones and para-methoxyamphetamine (PMA) was chosen as a representative ring-substituted amphetamine, because of the involvement of these drugs in recent drug-related deaths, because of a relative lack of information on their metabolism, and because reference standards of their metabolites were not commercially available. An LC/MS/MS method for the analysis of methylone, butylone, PMA and their metabolites was developed. Three phase I metabolites of methylone and butylone were detected in HLM samples. Ketone reduction to β-OH metabolites and demethylenation to dihydroxy-metabolites were found to be major phase I metabolic pathways of butylone and methylone whereas N-demethylation to nor-methylone and nor-butylone were found to be minor pathways. Also, demethylation to para-hydroxyamphetamine was found to be a major phase I metabolic pathway of PMA whereas β-hydroxylation to β-OH-PMA was found to be a minor pathway. Formaldehyde is used for embalming, to reduce decomposition and preserve cadavers, especially in tropical countries such as Thailand. Drugs present in the body can be exposed to formaldehyde resulting in decreasing concentrations of the original compounds and production of new substances. The aim of part II of the study was to evaluate the in vitro reactions of formaldehyde with selected drug groups including amphetamines (amphetamine, methamphetamine and MDMA), benzodiazepines (alprazolam and diazepam), opiates (morphine, hydromorphone, codeine and hydrocodone) and with a carbamate insecticide (carbosulfan). The study would identify degradation products to serve as markers for the parent compounds when these were no longer detectable. Drugs standards were spiked in 10% formalin solution and 10% formalin blood. Water and whole blood without formalin were used for controls. Samples were analysed by LC/MS/MS at different times from the start, over periods of up to 30 days. Amphetamine, methamphetamine and MDMA were found to rapidly convert to methamphetamine, DMA and MDDMA respectively, in both formalin solution and formalin blood, confirming the Eschweiler-Clarke reaction between amine-containing compounds and formaldehyde. Alprazolam was found to be unstable whereas diazepam was found to be stable in both formalin solution and water. Both were found to hydrolyse in formalin solution and to give open-ring alprazolam and open-ring diazepam. Other alprazolam conversion products attached to paraformaldehyde were detected in both formalin solution and formalin blood. Morphine and codeine were found to be more stable than hydromorphone and hydrocodone in formalin solution. Conversion products of hydromorphone and hydrocodone attached to paraformaldehyde were tentatively identified in formalin solution. Moreover, hydrocodone and hydromorphone rapidly decreased within 24 h in formalin blood and could not be detected after 7 days. Carbosulfan was found to be unstable in formalin solution and was rapidly hydrolysed within 24 h, whereas in water it was stable up to 48 h. Carbofuran was the major degradation product, plus smaller amounts of other products, 3-ketocarbofuran and 3-hydrocarbofuran. By contrast, carbosulfan slowly hydrolysed in formalin-blood and was still detected after 15 days. It was concluded that HLM provide a useful tool for human drug metabolism studies when ethical considerations preclude their controlled administration to humans. The use of chemical derivatisation for hydrophilic compounds such as polar drug metabolites for analysis by LC/MS/MS with a conventional C18 column is effective and inexpensive, and suitable for routine use in the identification and quantitation of drugs and their metabolites. The detection of parent drugs and their metabolites or conversion and decomposition products is potentially very useful for the interpretation of cases in forensic toxicology, especially when the original compounds cannot be observed.

NFL-lipid nanocapsules for brain neural stem cell targeting in vitro and in vivo

International audience

Studies of antihypertensive drug persistence and adherence in the Glasgow Blood Pressure Clinic

Hypertension (HTN) is a major risk factor for cardiovascular diseases including stroke, coronary heart disease (CHD), chronic renal failure, peripheral vascular disease, myocardial infarction, congestive heart failure and premature death. The prevalence of HTN in Scotland is very high and although a high proportion of the patients receive antihypertensive medications, blood pressure (BP) control is very low. Recommendations for starting a specific antihypertensive class have been debated between various guidelines over the years. Some guidelines and HTN studies have preferred to start with a combination of an antihypertensive class instead of using a single therapy, and they have found greater BP reductions with combination therapies than with monotherapy. However, it has been shown in several clinical trials that 20% to 35% of hypertensive patients could not achieve the target BP, even though they received more than three antihypertensive medications. Several factors were found to affect BP control. Adherence and persistence were considered as the factors contributing the most to uncontrolled hypertension. Other factors such as age, sex, body mass index (BMI), alcohol intake, baseline systolic BP (SBP), and the communication between physicians and patients have been shown to be associated with uncontrolled BP and resistant hypertension. Persistence, adherence and compliance are interchangeable terms and have been used in the literature to describe a patient’s behaviour with their antihypertensive drugs and prescriptions. The methods used to determine persistence and adherence, as well as the inclusion and exclusion criteria, vary between persistence and adherence studies. The prevalence of persistence and adherence have varied between these studies, and were determined to be high in some studies and low in others. The initiation of a specific antihypertensive class has frequently been associated with an increase or decrease in adherence and persistence. The tolerability and efficacy of the initial antihypertensive class have been the most common methods of explaining this association. There are also many factors that suggest a relationship with adherence and persistence. Some factors in previous studies, such as age, were frequently associated with adherence and persistence. On the other hand, relationships with certain factors have varied between the studies. The associations of age, sex, alcohol use, smoking, baseline systolic blood pressure (SBP) and diastolic BP (DBP), the presence of comorbidities, an increase in the number of pills and the relationship between patients and physicians with adherence and persistence have been the most commonly investigated factors. Most studies have defined persistence in terms of a patient still taking medication after a period of time. A medication possession ratio (MPR) ≥ 80 has been used to define compliance. Either of these terminologies, or both, have been used to estimate adherence. In this study, I used the same definition for persistence to identify patients who have continued with their initial treatment, and used persistence and MPR to define patients who adhered to their initial treatment. The aim of this study was to estimate the prevalence of persistence and adherence in Scotland. Also, factors that could have had an effect on persistence and adherence were studied. The number of antihypertensive drugs taken by patients during the study and factors that led to an increase in patients being on a combination therapy were also evaluated. The prevalence of resistance and BP control were determined by taking the BP after the last drug had been taken by persistent patients during five follow-up studies. The relationship of factors such as age, sex, BMI, alcohol use, smoking, estimated glomerular filtration rate (eGFR), and albumin levels with BP reductions for each antihypertensive class were determined. Information Services Division (ISD) data, which includes all antihypertensive drugs, were collected from pharmacies in Scotland and linked to the Glasgow Blood Pressure Clinic (GBPC) database. This database also includes demographic characteristics, BP readings and clinical results for all patients attending the GBPC. The case notes for patients who attended the GBPC were reviewed and all new antihypertensive drugs that were prescribed between visits, BP before and after taking drugs, and any changes in the hypertensive drugs were recorded. A total of 4,232 hypertensive patients were included in the first study. The first study showed that angiotensin converting enzyme inhibitor (ACEI) and beta-blockers (BB) were the most prescribed antihypertensive classes between 2004 and 2013. Calcium channel blockers (CCB), thiazide diuretics and angiotensin receptor blockers (ARB) followed ACEI and BB as the most prescribed drugs during the same period. The prescription trend of the antihypertensive class has changed over the years with an increase in prescriptions for ACEI and ARB and a decrease in prescriptions for BB and diuretics. I observed a difference in antihypertensive class prescriptions by age, sex, SBP and BMI. For example, CCB, thiazide diuretics and alpha-blockers were more likely to be prescribed to older patients, while ACEI, ARB or BB were more commonly prescribed for younger patients. In a second study, 4,232 and 3,149 hypertensive patients were included to investigate the prevalence of persistence in the Scottish population in 1- and 5-year studies, respectively. The prevalence of persistence in the 1-year study was 72.9%, while it was only 62.8% in the 5-year study. Those patients taking ARB and ACEI showed high rates of persistence and those taking diuretics and alpha blockers had low rates of persistence. The association of persistence with clinical characteristics was also investigated. Younger patients were more likely to totally stop their treatment before restarting their treatment with other antihypertensive drugs. Furthermore, patients who had high SBP tended to be non-persistent. In a third study, 3,085 and 1,979 patients who persisted with their treatment were included. In the first part of the study, MPR was calculated, and patients with an MPR ≥ 80 were considered as adherent. Adherence rates were 29.9% and 23.4% in the 1- and 5-year studies, respectively. Patients who initiated the study with ACEI were more likely to adhere to their treatments. However, patients who initiated the study with thiazide diuretics were less likely to adhere to their treatments. Sex, age and BMI were different between the adherence and non-adherence groups. Age was an independent factor affecting adherence rates during both the 1- and 5-year studies with older patients being more likely to be adherent. In the second part of the study, pharmacy databases were checked with patients' case notes to compare antihypertensive drugs that were collected from the pharmacy with the antihypertensive prescription given during the patient’s clinical visit. While 78.6% of the antihypertensive drugs were collected between clinical visits, 21.4% were not collected. Patients who had more days to see the doctor in the subsequent visit were more likely to not collect their prescriptions. In a fourth study, 3,085 and 1,979 persistent patients were included to calculate the number of antihypertensive classes that were added to the initial drug during the 1-year and 5-year studies, respectively. Patients who continued with treatment as a monotherapy and who needed a combination therapy were investigated during the 1- and 5-year studies. In all, 55.8% used antihypertensive drugs as a monotherapy and 44.2% used them as a combination therapy during the 1-year study. While 28.2% of patients continued with treatment without the required additional therapy, 71.8% of the patients needed additional therapy. In all, 20.8% and 46.5% of patients required three different antihypertensive classes or more during the 1-year and 5-year studies, respectively. Patients who started with ACEI, ARB and BB were more likely to continue as monotherapy and less likely to need two more antihypertensive drugs compared with those who started with alpha-blockers, non-thiazide diuretics and CCB. Older ages, high BMI levels, high SBP and high alcohol intake were independent factors that led to an increase in the probability of patients taking combination therapies. In the first part of the final study, BPs were recorded after the last drug had been taken during the 5 year study. There were 815 persistent patients who were assigned for this purpose. Of these, 39% had taken one, two or three antihypertensive classes and had controlled BP (controlled hypertension [HTN]), 29% of them took one or two antihypertensive classes and had uncontrolled BP (uncontrolled HTN), and 32% of the patients took three antihypertensive classes or more and had uncontrolled BP (resistant HTN). The initiation of an antihypertensive drug and the factors affecting BP pressure were compared between the resistant and controlled HTN groups. Patients who initiated the study with ACEI were less likely to be resistant compared with those who started with alpha blockers and non-thiazide diuretics. Older patients, and high BMI tended to result in resistant HTN. In the second part of study, BP responses for patients who initiated the study with ACEI, ARB, BB, CCB and thiazide diuretics were compared. After adjusting for risk factors, patients who initiated the study with ACEI and ARB were more respondent than those who took CCB and thiazide diuretics. In the last part of this study, the association between BP reductions and factors affecting BP were tested for each antihypertensive drug. Older patients responded better to alpha blockers. Younger patients responded better to ACEI and ARB. An increase in BMI led to a decreased reduction in patients on ACEI and diuretics (thiazide and non-thiazide). An increase in albumin levels and a decrease in eGFR led to decreases in BP reductions in patients on thiazide diuretics. An increase in eGFR decreased the BP response with ACEI. In conclusion, although a high percentage of hypertensive patients in Scotland persisted with their initial drug prescription, low adherence rates were found with these patients. Approximately half of these patients required three different antihypertensive classes during the 5 years, and 32% of them had resistant HTN. Although this study was observational in nature, the large sample size in this study represented a real HTN population, and the large pharmacy data represented a real antihypertensive population, which were collected through the support of prescription data from the GBPC database. My findings suggest that ACEI, ARB and BB are less likely to require additional therapy. However, ACEI and ARB were better tolerated than BB in that they were more likely to be persistent than BB. In addition, users of ACEI, and ARB have good BP response and low resistant HTN. Linkage patients who participated in these studies with their morbidity and mortality will provide valuable information concerning the effect of adherence on morbidity and mortality and the potential benefits of using ACEI or ARB over other drugs.

Applied evolution: An integrated approach to studying life history traits in response to drug selection

The use of chemical control measures to reduce the impact of parasite and pest species has frequently resulted in the development of resistance. Thus, resistance management has become a key concern in human and veterinary medicine, and in agricultural production. Although it is known that factors such as gene flow between susceptible and resistant populations, drug type, application methods, and costs of resistance can affect the rate of resistance evolution, less is known about the impacts of density-dependent eco-evolutionary processes that could be altered by drug-induced mortality. The overall aim of this thesis was to take an experimental evolution approach to assess how life history traits respond to drug selection, using a free-living dioecious worm (Caenorhabditis remanei) as a model. In Chapter 2, I defined the relationship between C. remanei survival and Ivermectin dose over a range of concentrations, in order to control the intensity of selection used in the selection experiment described in Chapter 4. The dose-response data were also used to appraise curve-fitting methods, using Akaike Information Criterion (AIC) model selection to compare a series of nonlinear models. The type of model fitted to the dose response data had a significant effect on the estimates of LD50 and LD99, suggesting that failure to fit an appropriate model could give misleading estimates of resistance status. In addition, simulated data were used to establish that a potential cost of resistance could be predicted by comparing survival at the upper asymptote of dose-response curves for resistant and susceptible populations, even when differences were as low as 4%. This approach to dose-response modeling ensures that the maximum amount of useful information relating to resistance is gathered in one study. In Chapter 3, I asked how simulations could be used to inform important design choices used in selection experiments. Specifically, I focused on the effects of both within- and between-line variation on estimated power, when detecting small, medium and large effect sizes. Using mixed-effect models on simulated data, I demonstrated that commonly used designs with realistic levels of variation could be underpowered for substantial effect sizes. Thus, use of simulation-based power analysis provides an effective way to avoid under or overpowering a study designs incorporating variation due to random effects. In Chapter 4, I 3 investigated how Ivermectin dosage and changes in population density affect the rate of resistance evolution. I exposed replicate lines of C. remanei to two doses of Ivermectin (high and low) to assess relative survival of lines selected in drug-treated environments compared to untreated controls over 10 generations. Additionally, I maintained lines where mortality was imposed randomly to control for differences in density between drug treatments and to distinguish between the evolutionary consequences of drug treatment versus ecological processes affected by changes in density-dependent feedback. Intriguingly, both drug-selected and random-mortality lines showed an increase in survivorship when challenged with Ivermectin; the magnitude of this increase varied with the intensity of selection and life-history stage. The results suggest that interactions between density-dependent processes and life history may mediate evolved changes in susceptibility to control measures, which could result in misleading conclusions about the evolution of heritable resistance following drug treatment. In Chapter 5, I investigated whether the apparent changes in drug susceptibility found in Chapter 4 were related to evolved changes in life-history of C. remanei populations after selection in drug-treated and random-mortality environments. Rapid passage of lines in the drug-free environment had no effect on the measured life-history traits. In the drug-free environment, adult size and fecundity of drug-selected lines increased compared to the controls but drug selection did not affect lifespan. In the treated environment, drug-selected lines showed increased lifespan and fecundity relative to controls. Adult size of randomly culled lines responded in a similar way to drug-selected lines in the drug-free environment, but no change in fecundity or lifespan was observed in either environment. The results suggest that life histories of nematodes can respond to selection as a result of the application of control measures. Failure to take these responses into account when applying control measures could result in adverse outcomes, such as larger and more fecund parasites, as well as over-estimation of the development of genetically controlled resistance. In conclusion, my thesis shows that there may be a complex relationship between drug selection, density-dependent regulatory processes and life history of populations challenged with control measures. This relationship could have implications for how resistance is monitored and managed if life histories of parasitic species show such eco-evolutionary responses to drug application.

Analysis of cyclic variations during mode switching between spark ignition and controlled auto-ignition combustion operations

© IMechE 2014. Controlled auto-ignition, also known as homogeneous charge compression ignition, has been the subject of extensive research because of their ability to provide simultaneous reductions in fuel consumption and NOx emissions from a gasoline engine. However, due to its limited operation range, switching between controlled auto-ignition and spark ignition combustion is needed to cover the complete operating range of a gasoline engine for passenger car applications. Previous research has shown that the spark ignition -controlled auto-ignition hybrid combustion (SCHC) has the potential to control the ignition timing and heat release process during the mode transition operations. However, it was found that the SCHC is often characterized with large cycle-to-cycle variations. The cyclic variations in the in-cylinder pressure are particularly noticeable in terms of both their peak values and timings while the coefficient of variation in the indicated mean effective pressure is much less. In this work, the cyclic variations in SCHC operations were analyzed by means of in-cylinder pressure and heat release analysis in a single-cylinder gasoline engine equipped with Variable Valve Actuation (VVA) systems. First, characteristics of the in-cylinder pressure traces during the spark ignition-controlled auto-ignition hybrid combustion operation are presented and their heat release processes analyzed. In order to clarify the contribution to heat release and cyclic variation in SCHC, a new method is introduced to identify the occurrence of auto-ignition combustion and its subsequent heat release process. Based on the new method developed, the characteristics of cyclic variations in the maximum rate of pressure rise and different stages of heat release process have been analyzed and discussed.

Release of copper complexes from a nanostructured sol–gel titania for cancer treatment

Copper complexes containing inorganic ligands were loaded on a functionalized titania (F-TiO2) to obtain drug delivery systems. The as-received copper complexes and those released from titania were tested as toxic agents on different cancer cell lines. The sol–gel method was used for the synthesis and surface functionalization of the titania, as well as for loading the copper complexes, all in a single step. The resultant Cu/F-TiO2 materials were characterized by several techniques. An “in vitro” releasing test was developed using an aqueous medium. Different concentrations (15.6–1000 µg mL−1) of each copper complex, those loaded on titania (Cu/F-TiO2), functionalized titania, and cis-Pt as a reference material, were incubated on RG2, C6, U373, and B16 cancer cell lines for 24 h. The morphology of functionalized titania and the different Cu/F-TiO2 materials obtained consists of aggregated nanoparticles, which generate mesopores. The amorphous phase (in dominant proportion) and the anatase phase were the structures identified through the X-ray diffraction profiles. These results agree with high-resolution transmission electron microscopy. Theoretical studies indicate that the copper compounds were released by a Fickian diffusion mechanism. It was found that independently of the copper complex and also the cell line used, low concentrations of each copper compound were sufficient to kill almost 100 % of cancer cells. When the cancer cells were treated with increasing concentrations of the Cu/F-TiO2 materials the number of survival cells decreased. Both copper complexes alone as well as those loaded on TiO2 had higher toxic effect than cis-Pt.