988 resultados para Plantation Forestry
Resumo:
Global warming is assertively the greatest environmental challenge for humans of 21st century. It is primarily caused by the anthropogenic greenhouse gas (GHG) that trap heat in the atmosphere. Because of which, the GHG emission mitigation, globally, is a critical issue in the political agenda of all high-profile nations. India, like other developing countries, is facing this threat of climate change while dealing with the challenge of sustaining its rapid economic growth. India’s economy is closely connected to its natural resource base and climate sensitive sectors like water, agriculture and forestry. Due to Climate change the quality and distribution of India’s natural resources may transform and lead to adverse effects on livelihood of its people. Therefore, India is expected to face a major threat due to the projected climate change. This study proposes possible solutions for GHG emission mitigation that are specific to the power sector of India. The methods discussed here will take Indian power sector from present coal dominant ideology to a system, centered with renewable energy sources. The study further proposes a future scenario for 2050, based on the present Indian government policies and global energy technologies advancements.
Resumo:
This study aimed to evaluate different crops and plant species planted after soybeans for one year, in terms of their potential to inhibit the occurrence of weed species. The following crops that were planted as second crop after soybeans were evaluated: (1) corn (Zea mays) planted at spacing of 90 cm between rows, intercropped with Brachiaria ruziziensis in the inter-rows; (2) sunflower (Helianthus annuus); (3) crambe (Crambe abyssinica); (4) radish (Raphanus sativus); (5) rapeseed (Brassica napus); and (6) winter fallow - no plantation after soybeans. Phytosociological characterization of weed species was carried out at the pre-planting of soybeans in the following cropping season. Estimations of relative abundance, relative frequence, relative dominance and Importance Value Index were made for each species present. Areas were also intra-characterized by the diversity coefficients of Simpson and modified Shannon-Weiner, and areas were compared using the Jaccard similarity coefficient for presence-only, by multivariate cluster analysis. In the short‑term (a single cropping season), cultivation of winter crops do contribute for lower occurrence of weed species at the pre-planting of soybeans on the subsequent cropping season. The suppressive effects depend both on the species grown in the winter and in the amount of straw left on the soil by these winter crops. Radish was more efficient in inhibiting the occurrence of weed species and rapeseed showed composition of infestation similar to that observed at the area under fallow.
Resumo:
This study aimed to evaluate the level of infestation by weed species in a consolidated Jatropha plantation, as a function of the plant species grown in interrows. The experiment was installed in 2006 at the district of Itahum, city of Dourados, state of Mato Grosso do Sul, Brazil, made possible through a partnership between Embrapa Western Agriculture and Paraiso Farm. Treatments consisted of (1) Jatropha in monocrop, with no plant at the interrrows; or the following plants cultivaded at the interrows of Jatropha: (2) Stylosanthes spp.; (3) Brachiaria ruziziensis; (4) Brachiaria ruziziensis + Stylosanthess pp.; (5) Brachiaria humidicola; (6) Panicum maximum cv. massai; (7) Cajanus cajan cv. anão; (8) Crotalaria spectabilis; (9) Crop rotation system 1 - (maize second crop -Crambe abyssinica - soybean - peanut); and (10) Crop rotation system 2 - (cowpea - radish - maize - cowpea) conducted for two years. Phytosociological characterization of weed species was accomplished in 2011 based on the Ecological Approach. Estimations of relative abundance, frequency, dominance and Importance Value Index were obtained. Areas were also characterized by the diversity coefficients of Simpson and modified Shannon-Weiner, and then grouped by cluster analysis. Areas with low soil coverage resulted in higher infestation levels; crop rotation in the interrows of Jatropha produced a significant reduction in weed infestation, but the lowest infestation levels were observed when grasses were grown intercropped with Jatropha. Lower diversity coefficients were associated with occurrence of the most troublesome weed species. In the first years after planting Jatropha, species of Brachiaria or a crop rotation involving species with high mulching ability and whose biomass exhibit a high C:N ratio, should be established in the interrows to avoid problems with weeds infestation.
Resumo:
We aimed with this study to compare weed infestation in coffee under two different cropping managements: conventional coffee grown alone, or intercropped with banana plantation in a year-round basis (late spring, late summer, late fall and late winter). The experiment was installed in 2009 under field conditions at the Escola Municipal Rural Benedita Figueiró de Oliveira, in the city of Ivinhema in the state of Mato Grosso do Sul, Brazil. Assessments of weed occurrence were made three years after employment, on both cropping systems, and density, frequency, dominance and the importance value for each plant species in each system and season were quantified. Plant diversity within each system was estimated by Simpson and Shannon-Weiner indexes. Similarity between cropping systems were also assessed by the binary asymmetric similarity coefficient of Jaccard. Absolute infestation and spontaneous species differed between the two cropping systems in all seasons. Overall species diversity is higher in the monocrop compared with the intercrop, and it is associated in this study with the higher incidence of troublesome species. Areas were similar in terms of weed composition only in the Fall. Shading provided by the banana trees shows to be an efficient culture management aiming to suppress weeds in agro-ecological planting systems.
Resumo:
Podisus nigrispinus is a generalist predator naturally occurring in agricultural and forestry systems that effectively contributes to the population balance of phytophagous insects, especially defoliating caterpillars. Histological changes were evaluated in the salivary glands and midgut of P. nigrispinus caused by ingestion of systemic herbicide isoxaflutole. These predator females were fed with leaves of eucalyptus plants, Tenebrio molitor pupae or water, contaminated or not by herbicide. Salivary glands and midguts were dissected, processed and analyzed under a light microscope. Activity level and cell morphology of the salivary glands and midgut showed differences among insects fed on plants, contaminated water or pupae. The epithelia of the salivary gland and midgut of individuals which had no contact with the herbicide showed homogeneous cytoplasm, nucleus with predominance of decondensed chromatin and evident nucleoli, intense cell activity features. As for the insects in contact with contaminated food, they presented undeveloped nucleus and condensed chromatin. The luminal contents of the salivary glands in the contaminated insects had become more acidophilus than in insects without poisoning, as well as having heterogeneous and granular secretion, being more evident in the bioassay in which the insects fed on contaminated water. There was a marked morphological change in the midgut cells in contaminated insects. High degree of apoptosis, disorganization and secretory vacuoles in the epithelial cytoplasm were observed. The apical portion of the midgut cells proved undeveloped, irregular and partially destroyed. It is concluded that isoxaflutole causes morphological changes in the digestive system of the predator P. nigrispinus.
Resumo:
Kaakkois-Suomessa (Kymenlaakson ja Etelä-Karjalan maakunnat) metsäenergian käytön kasvaessa on tullut tarve tarkastella käytön kasvua eri käyttäjien näkökulmasta sekä arvioida kasvaneen käytön luomia liiketoimintamahdollisuuksia alueen toimijoille. Tutkimuksen tavoitteena on selvittää metsäenergian nykyinen käyttö ja käytön kasvumahdollisuudet alueella. Metsäenergian käytön kasvumahdollisuuksia voidaan arvioida nykyisen energian tuotantorakenteen sekä energian tarpeen perusteella. Näiden tietojen pohjalta voidaan arvioida metsäenergian riittävyyttä, käytön laajentamista ja laajentamisen yhteydessä syntyviä liiketoimintamahdollisuuksia alueen metsäenergian hankinnassa mukana oleville toimijoille ja energian tuotannon pk-yrittäjille (mm. energiayrittäjät ja -osuuskunnat). Hankkeen toteutuksen yhteydessä valmistellaan laajempaa hankekokonaisuutta uusiutuvien paikallisten energiamahdollisuuksien hyödyntämiseksi ja liiketoiminnan kehittämiseksi alueella. Tutkimusten tavoitteena on luoda hyvinvointia ja liiketoimintamahdollisuuksia alueelle. Etelä-Karjalan ja Kymenlaakson maakuntien osalta tutkimus sisälsi seuraavat osatehtävät: metsäenergian nykyisen käytön selvittäminen käyttökohteittain ja polttoainelajeittain (hakkuutähteet, kannot, pienpuu), metsäenergian potentiaalisten käyttökohteiden selvittäminen, metsäenergian kuntakohtaisen saatavuuden selvittäminen polttoainelajeittain, metsäenergian käytön suhde saatavuuteen, metsäenergian ympärille liittyvien liiketoimintamahdollisuuksien tunnistaminen ja kartoittaminen sekä tulosten raportointi. Tutkimuksen tuloksina saatiin Etelä-Karjalan ja Kymenlaakson maakuntien kuntakohtaiset taseet metsäenergian kysynnän ja tarjonnan määristä sekä alaan liittyvistä työllisyys- ja liiketoimintamahdollisuuksista. Tutkimuksen toteutuksessa on tehty tiiviisti yhteistyötä Kaakkois-Suomen metsäkeskuksen kanssa. Tutkimuksen seurantaryhmänä toimi Kaakkois-Suomen metsäenergianeuvottelukunta. Tutkimuksessa on luotu toimintamalli alueellisen ja paikallisen metsäenergian käytön ja saatavuuden tarkastelua varten. Toimintamallilla voidaan esittää paikalliset mahdollisuudet metsäenergian hyödyntämiseksi ja liiketoimintamahdollisuuksien arvioimiseksi.
Resumo:
A new Dam Safety Act (494/2009) came into force on 1st October 2009 and a Government Decree on Dam Safety (319/2010) on 5th May 2010. This Dam Safety Guide replaces the Dam Safety Code of Practice (Publication of the Ministry of Agriculture and Forestry 7/1997), removed from circulation on 1st October 2009. The Dam Safety Guide is not binding on the dam owner; the purpose is to complement and elucidate the relevant law and and decree through examples and descriptions. The Guide takes up questions concerning dam design, for instance hydrological dimensioning and technical safety requirements, dam construction and use, the dam break hazard analysis and the dam owner’s emergency action plan, maintenance, use, monitoring as well as the annual and periodic inspections. Dams are classified according to the hazard they pose into class 1, 2 or 3 dams. The classification is not needed, if, according to the dam safety authority, the dam poses no danger. The owner of a classified dam must prepare a monitoring programme, to be approved by decision of the dam safety authority. To establish the hazard caused by a dam, the owner of a class 1 dam must prepare an analysis of the dam hazard to humans and property as well as to the environment. The dam safety authority may also require a dam break hazard analysis for a dam other than class 1 dam if deemed necessary for classification. The owner of a class 1 dam must prepare a plan of measures in case of emergency or operational failure. The plan shall present the dam owner’s state of preparedness to act on their own initiative in the situations described above. In each case, the rescue authorities make a separate assessment for the need to prepare a plan as set out in the Rescue Act. The dam owner must provide the information specified in the Dam Safety Decree to be entered into the dam safety information system. The dam safety authority and the owner of the dam must keep up-to-date printouts in their own dam safety files from the information system for each dam as well as other important documents connected with dam safety to ensure that these are readily available in case of disturbance.
Resumo:
Tämän Pro Gradun tarkoituksena on analysoida metsäteollisuusorganisaation henkilöstötutkimuksen tuloksia ja tutkia itseohjautuvan tiimin tehokkuuteen vaikuttavia tekijöitä. Lisäksi tutkimus keskittyy esimiestyön merkitykseen itsensä johtamiseen kannustamisessa. Tutkimuksen päätutkimuskysymys on Millaisia ovat itseohjautuvan tiimin tehokkuuden tekijät ja miten jaetulla johtajuudella voidaan vaikuttaa niihin? Tutkimuksen teoreettinen osuus keskittyy tiimin tehokkuutta ja jaettua johtajuutta koskevaan kirjallisuuteen. Empiirinen tutkimus toteutettiin laadullisena tutkimuksena, jossa hyödynnettiin Survey -menetelmää. Tutkimusaineisto koostuu metsäteollisuusorganisaation neljän yksikön vuosien 2006-2013 henkilöstötutkimustuloksista. Aineistoa analysoitiin kuvailevan tilastotieteen keinoin. Tutkimuksen tuloksena tunnistettiin itseohjautuvan tiimin tehokkuuden tekijöitä. Tutkimustuloksista nousee esiin ennen kaikkea itseohjautuvan tiimin autonomisen toimintaympäristön ja johtamisen tärkeys sekä yksilöiden ominaisuuksien merkitys. Tutkimus tarjosi tukea kohdeorganisaation jaetun johtamisen kehittämisen suunnitteluun.
Resumo:
Targeted measures bring the greatest benefits for environmental protection in agriculture final report of the TEHO Plus project (2011–2014). Particular priority areas of the project activities included creating a training package for agri-environment advisers and testing it, farm-specific advisory services and exploitation of experiences of advice provision, putting together an information package of agri-environment issues, farm-level experiments, and development of water quality monitoring. The recommendations issued by advisers on targeting environmental measures were based on utilising geographical information material and nutrient balances. The project was implemented in cooperation by Southwest Finland Centre for Economic Development, Transport and the Environment, MTK-Satakunta and MTK-Varsinais-Suomi. The project received funding from the Ministry of Agriculture and Forestry and the Ministry of the Environment. Participating farmers, with whom environmental advice was developed and experiments were carried out, were important partners for the project. The operating area of the project was Satakunta and Varsinais-Suomi in Southwest Finland, but its outcomes can be exploited nationally. A national perspective was ensured by close cooperation with actors in different provinces. This final report describes project experiences and outcomes including environmental advisory services, training of agri-environmental advisers, farm visits and the feedback received from farmers on agri-environmental advice, development of water quality monitoring, experiments and project work.
Resumo:
The Amazonian region, the biggest rain forest of our planet, is known for its extraordinary biodiversity. Most of this diversity is still unexplored and new species of different taxa are regularly found there. In this region, as in most areas of the world, insects are some of the most abundant organisms. Therefore, studying this group is important to promote the conservation of these highly biodiverse ecosystems of the planet. Among insects, parasitoid wasps are especially interesting because they have potential for use as biodiversity indicators and biological control agents in agriculture and forestry. The parasitoid wasp family Ichneumonidae is one of the most species rich groups among the kingdom Animalia. This group is still poorly known in many areas of the world; the Amazonian region is a clear example of this situation. Ichneumonids have been thought to be species poor in Amazonia and other tropical areas. However, recent studies are suggesting that parasitoid wasps may be quite abundant in Amazonia and possibly in most tropical areas of the world. The aim of my doctoral thesis is to study the species richness and taxonomy of two of the best known ichneumonid subfamilies in the Neotropical region, Pimplinae and Rhyssinae. To do this I conducted two extensive sampling programs in the Peruvian Amazonia. I examined also a large number of Neotropical ichneumonids deposited to different natural history museums. According to the results of my thesis, the species richness of these parasitoids in the Amazonian region is considerably higher than previously reported. In my research, I firstly further develop the taxonomy of these parasitoids by describing many new species and reporting several new faunistic records (I, II, III). In this first part I focus on two genera (Xanthopimpla and Epirhyssa) which were thought to be rather species poor. My thesis demonstrates that these groups are actually rather species rich in the Amazonian region. Secondly, I concentrate on the species richness of these parasitoids in a global comparison showing that the Neotropical region and especially the Peruvian Amazonia is one of the most species rich areas of Pimpliformes ichneumonids (V). Furthermore, I demonstrate that with the data available to date no clear latitudinal gradient in species richness is visible. Thirdly, increasing the macroecological knowledge of these parasitoids I show that some previously unreported ichneumonid subfamilies are present in the Amazonian region (IV). These new insights and the results of the global comparison of ichneumonid inventories suggest that the previous belief of low diversity in the tropics is most likely related to a lack of sampling effort in the region. Overall, my research increases the knowledge of Neotropical ichneumonids highlighting the importance of Peruvian Amazonia as one of the diversity hotspots of parasitoid wasps.
Resumo:
The aim of the thesis was both to study wooden packaging waste reuse and refining generated in the forestry machine factory environment, and to find alternative wooden packaging waste utilization options in order to create a new operating model which would decrease the overall amount of waste produced. As environmental and waste legislation has become more rigid and companies' own environmental management systems’ requirements and control have increased, companies have had to consider their environmental aspects more carefully. Companies have to take into account alternative ways of reducing waste through an increase in reuse and recycling. A part of this waste is from different forms of packaging. In the metal industry the most heavily used packaging material is wooden packaging, as such material is heavy and the packaging has to be able to bear heavy stress. In the theoretical part of the thesis, the requirements of packaging and packaging waste legislation, as well as environmental management systems governing companies’ processing of their packaging waste, are studied. The theoretical part includes a process study of systems, which direct packaging waste and wooden packaging waste refining. In addition, methods related to the continuous improvement of these processes are introduced. This thesis concentrates on designing and creating a new operating model in relation to wooden packaging waste processing. The main target was to find an efficient model in order to decrease the total amount of wooden packaging waste and to increase refining. The empirical part introduces methods for approaches to wooden packaging waste re-utilization, as well as a description of a new operating model and its impact.
Resumo:
Tutkimuksen tarkoituksena oli selvittää, mitkä asiat tutkimuksen toimeksiantavan yrityksen, John Deere Forestry Oy:n metsäkoneiden panssareiden ja luukkujen kanssa työskentelevä henkilöstö kokee oleellisimmiksi pohjan suojien asennettavuuden, käytettävyyden, kestävyyden ja laadun kehittämisessä. Tutkimuksella haluttiin myös selvittää, mitä hyödynnettävää tietoa yrityksen sisältä jo löytyy, mitä hiljaista tietoa henkilöstöllä on ja miten tätä kaikkea voidaan hyödyntää jatkossa suunnittelun tukena. Pääasiallisina tutkimusmenetelminä käytettiin strukturoitua kyselytutkimusta, toimeksiantavan yrityksen sekä kilpailijoiden rakenneratkaisujen tarkastelua sekä lujuuslaskentaa. Kyselytutkimuksen aineisto kerättiin loppukesästä 2014. Otanta koostui 149:stä eri toimipaikkojen työntekijästä. Aineisto käsiteltiin pääasiassa kvantitatiivisesti käyttämällä ristiintaulukointia. Kyselytutkimuksen tulosten perusteella syvennyttiin tarkastelemaan pohjan suojausta myös koneteknillisellä lähestymistavalla. Tarkastelun kohteeksi valitulle panssarille tehtiin lujuuslaskentoja kyselyn vastausten varmentamiseksi ja ongelmien tarkentamiseksi, parannusehdotuksien tueksi. Aihetta tarkasteltiin asennusergonomian, työturvallisuuden ja vaurioitumismekanismien valossa. Tulosten analysoinnin yhteydessä esitettiin ratkaisuehdotuksia yleisimpiin ongelmiin laadun kehittämiseksi. Keskeisimmät ratkaisuehdotukset liittyvät panssareiden rakenteellisen stabiiliuden parantamiseen. Käytännön toimenpide-esityksinä esimerkiksi jäykisteet, tuennat, materiaalivalinnat, uudelleenmuotoilu, apuasennustyökalut, turvavarustelut ja avautumissuunnat olisivat huomion arvoisia asioita. Tutkimuksessa kerätty tieto kootaan sovellettavaksi käytäntöön laadun kehittämiseksi tekemällä toimeksiantavalle yritykselle metsäkoneiden panssareiden ja pohjan luukkujen suunnitteluohje. Tällä pyritään jatkossa parantamaan kilpailukykyä.
Resumo:
This thesis applies the customer value hierarchy model to forestry in order to determine strategic options to enhance the value of LiDAR technology in Russian forestry. The study is conducted as a qualitative case study with semi-structured interviews as a main source of the primary data. The customer value hierarchy model constitutes a theoretical base for the research. Secondary data incorporates information on forest resource management, LiDAR technology and Russian forestry. The model is operationalised using forestry literature and forms a basis for analyses of primary data. Analyses of primary data coupled with comprehension of Russian forest inventory system and knowledge on global forest inventory have led to conclusions on the forest inventory methods selection criteria and the organizations that would benefit the most from LiDAR technology use. The thesis recommends strategic options for LiDAR technology’s value enhancement in Russian forestry.
Resumo:
This research report applies the customer value hierarchy model to forestry in order to determine strategic options to enhance the value of LiDAR technology in Russian forestry. The study is conducted as a qualitative case study with semi-structured interviews as a main source of the primary data. The customer value hierarchy model constitutes a theoretical base for the research. Secondary data incorporates information on forest resource management, LiDAR technology and Russian forestry. The model is operationalised using forestry literature and forms a basis for analyses of primary data. Analyses of primary data coupled with comprehension of Russian forest inventory system and knowledge on global forest inventory have led to conclusions on the forest inventory methods selection criteria and the organizations that would benefit the most from LiDAR technology use. The report recommends strategic options for LiDAR technology’s value enhancement in Russian forestry. This work has been conducted as a part of the project ‘Finnish-Russian Forest Academy 2 - Exploiting and Piloting’, which has been supported financially by the South-East Finland- Russia ENPI CBC 2007-2014 Programme.