Anaerobic metabolism of propionate by polyphosphate-accumulating organisms in enhanced biological phosphorus removal systems

Propionate, a carbon substrate abundant in many prefermenters, has been shown in several previous studies to be a more favorable substrate than acetate for enhanced biological phosphorus removal (EBPR). The anaerobic metabolism of propionate by polyphosphate accumulating organisms (PAOs) is studied in this paper. A metabolic model is proposed to characterize the anaerobic biochemical transformations of propionate uptake by PAOs. The model is demonstrated to predict very well the experimental data from a PAO culture enriched in a laboratory-scale reactor with propionate as the sole carbon source. Quantitative fluorescence in-situ hybridization (FISH) analysis shows that Candidatus Accumulibacter phosphatis, the only identified PAO to date, constitute 63% of the bacterial population in this culture. Unlike the anaerobic metabolism of acetate by PAOs, which induces mainly poly-beta-hydroxybutyrate (PHB) production, the major fractions of poly-beta-hydroxyalkanoate (PHA) produced with propionate as the carbon source are poly-beta-hydroxyvalerate (PHV) and poly-beta-hydroxy-2-methylvalerate (PH2MV). PHA formation correlates very well with a selective (or nonrandom) condensation of acetyl-CoA and propionyl-CoA molecules. The maximum specific propionate uptake rate by PAOs found in this study is 0.18 C-mol/C-mol-biomass h, which is very similar to the maximum specific acetate uptake rate reported in literature. The energy required for transporting 1 carbon-mole of propionate across the PAO cell membrane is also determined to be similar to the transportation of 1 carbon-mole of acetate. Furthermore, the experimental results suggest that PAOs possess a similar preference toward acetate and propionate uptake on a carbon-mole basis. (c) 2005 Wiley Periodicals, Inc.

The Thelastomatoidea (Nematoda : Oxyurida) of two sympatric Panesthiinae (Insecta : Blattodea) from southeastern Queensland, Australia: taxonomy, species richness and host specificity

The thelastomatoid fauna of two species of wood-burrowing cockroach (Blattodea, Blaberidae), Panesthia cribrata and Panesthia tryoni tryoni, from Lamington National Park, Australia, is described. The following eight new species and three new genera of thelastomatid are proposed: Bilobostoma exerovulva n. g., n. sp.; Cordonicola gibsoni n. sp.; Coronostoma australiae n. sp.; Desmicola ornata n. sp.; Hammerschmidtiella hochi n. sp.; Malaspinanema goateri n. g., n. sp.; Travassosinema jaidenae n. sp.; and Tsuganema cribratum n. g., n. sp. Additional data are given for Blattophila sphaerolaima and Leidynemella fusiformis. Of the 11 species reported, nine were found in P. cribrata and ten in P. tryoni tryoni. Such levels of thelastomatoid species richnessness in single host species are exceptional. Only the mole cricket, Gryllotalpa africana (23), and the domestic cockroach, Periplaneta americana (20), have higher reported richness. Three species, T jaidenae, C. australiae and D. ornata, were found either exclusively or significantly more prevalently in P tryoni tryoni than in R cribrata. Species of Travassosinema, Coronostoma and Desmicola have been found previously only in millipedes (Diplopoda), a fact that suggests that there is a greater degree of niche overlap between R tryoni tryoni and millipedes than for R cribrata.

Phase equilibria in high MgO ferro-manganese and silico-manganese smelting slags

Liquidus isotherms and phase equilibria have been determined experimentally for a pseudo-ternary section of the form MnO-(CaO+MgO)-(SiO2+Al2O3) with a fixed Al-2,O-3,/SiO2, weight ratio of 0.17 and MgO/CaO weight ratio of 0.17 for temperatures in the range 1473-1673 K. The primary phase fields present for the section investigated include manganosite (Mn,Mg,Ca)O; dicalcium silicate alpha-2(Ca,Mg,Mn)O (.) SiO2; merwinite 3CaO(.) ((Mg,Mn)O.2SiO(2); wollastonite [(Ca,Mg,Mn)(OSiO2)-Si-.]; ;tephroite [2(Mn,Mg)O.SiO2]; rhodonite [(Mn,Mg)O. diopside [(CaO,MgO,MnO,Al2O3)(SiO2)-Si-.]; tridymite (SiO2), SiO2] and melilite [2CaO (.) (MgO,MnO,Al2O3).2(SiO2,Al2O3)]. The liquidus temperatures relevant to ferro-manganese and silico-manganese smelting slags have been determined. The liquiclus temperature is shown to be principally dependent on the modified basicity weight ratio (CaO+Mgo)/(SiO2+Al2O3) at low MnO concentrations, and dependent on the mole ratio (CaO+ MgO+MnO)/(SiO2+Al2O3) at higher MnO concentrations.

Control of ordered structure and morphology of large-pore periodic mesoporous organosilicas by inorganic salt

Highly ordered rodlike periodic mesoporous organosilicas (PMO) were successfully synthesized using 1.2-bis(trimethoxysilyl)ethane as an precursor and triblock copolymer P123 as a template at low acid concentration and in the presence of inorganic salts (KCl). The role of acid and salt as well as the effects of synthesis temperature and reactant mole ratio in the control of morphology and the formation of ordered mesostructure was systematically examined. It was found that the addition of inorganic salt can dramatically expand the range of the synthesis parameters to produce highly ordered PMO structure and improve the quality of PMO materials. The morphology of PMOs was significantly dependent on the induction time for precipitation. The uniform PMO rods can only be synthesized in a narrow range of acid and salt concentrations. The results also show that the optimized salt concentration (I M) and low acidity (0.167 M) were beneficial to the formation of not only highly ordered mesostructure but also rodlike morphology. Increasing acidity resulted in fast hydrolysis reaction and short rod or plate-like particles. Highly ordered rod can also be prepared at low temperature (35 degrees C) with high salt amount (1.5 M) or high temperature (45 degrees C) with low salt amount (0.5 M). Optimum reactant molar composition at 40 degrees C is 0.035P123:8KCl:1.34HCI:444H(2)O:1.0bis(trimethoxysilyl)ethane. Lower or higher SiO2/PI23 ratio led to the formation of uniform meso-macropores or pore-blocking effect. (c) 2005 Elsevier Inc. All rights reserved.

Simulation of binary mixture adsorption of methane and CO2 at supercritical conditions in carbons

Knowledge of the adsorption behavior of coal-bed gases, mainly under supercritical high-pressure conditions, is important for optimum design of production processes to recover coal-bed methane and to sequester CO2 in coal-beds. Here, we compare the two most rigorous adsorption methods based on the statistical mechanics approach, which are Density Functional Theory (DFT) and Grand Canonical Monte Carlo (GCMC) simulation, for single and binary mixtures of methane and carbon dioxide in slit-shaped pores ranging from around 0.75 to 7.5 nm in width, for pressure up to 300 bar, and temperature range of 308-348 K, as a preliminary study for the CO2 sequestration problem. For single component adsorption, the isotherms generated by DFT, especially for CO2, do not match well with GCMC calculation, and simulation is subsequently pursued here to investigate the binary mixture adsorption. For binary adsorption, upon increase of pressure, the selectivity of carbon dioxide relative to methane in a binary mixture initially increases to a maximum value, and subsequently drops before attaining a constant value at pressures higher than 300 bar. While the selectivity increases with temperature in the initial pressure-sensitive region, the constant high-pressure value is also temperature independent. Optimum selectivity at any temperature is attained at a pressure of 90-100 bar at low bulk mole fraction of CO2, decreasing to approximately 35 bar at high bulk mole fractions. (c) 2005 American Institute of Chemical Engineers.

Temperature and the respiratory properties of whole blood in two reptiles, Pogona barbata and Emydura signata

We investigated the capacity of two reptiles, an agamid lizard Pogona barbata and a chelid turtle Emydura signata, to compensate for the effects of temperature by making changes in their whole blood respiratory properties. This was accomplished by measuring the P-50 (at 10, 20 and 30 degrees C), hematocrit (Hct), haemoglobin concentration ([Hb]) and mean cell haemoglobin concentration (MCHC) in field acclimatised and laboratory acclimated individuals. The acute effect of temperature on P50 in P barbata, expressed as heat of oxygenation (Delta H), ranged from -16.8 +/- 1.84 to -28.5 +/- 2.73 kJ/mole. P-50 of field acclimatised P barbata increased significantly from early spring to summer at the test temperatures of 20 degrees C (43.1 +/- 1.2 to 48.8 +/- 2.1 mmHg) and 30 degrees C (54.7 +/- 1.2 to 65.2 +/- 2.3 mmHg), but showed no acclimation under laboratory conditions. For E. signata, Delta H ranged from -31.1 +/- 6.32 to -48.2 +/- 3.59 kJ/mole. Field acclimatisation and laboratory acclimation of P-50 did not occur. However, in E. signata, there was a significant increase in [Hb] and MCHC from early spring to summer in turtles collected from the wild (1.0 +/- 0.1 to 1.7 +/- 0.2 mmol/L and 4.0 +/- 0.3 to 6.7 +/- 0.7 mmol/L, respectively). (C) 2005 Published by Elsevier Inc.

Optimization of slitlike carbon nanopores for storage of hythane fuel at ambient temperatures

Carbons with slitlike pores can serve as effective host materials for storage of hythane fuel, a bridge between the petrol combustion and hydrogen fuel cells. We have used grand canonical Monte Carlo simulation for the modeling of the hydrogen and methane mixture storage at 293 K and pressure of methane and hydrogen mixture up to 2 MPa. We have found that these pores serve as efficient vessels for the storage of hythane fuel near ambient temperatures and low pressures. We find that, for carbons having optimized slitlike pores of size H congruent to 7 angstrom ( pore width that can accommodate one adsorbed methane layer), and bulk hydrogen mole fraction >= 0.9, the volumetric stored energy exceeds the 2010 target of 5.4 MJ dm(-3) established by the U. S. FreedomCAR Partnership. At the same condition, the content of hydrogen in slitlike carbon pores is congruent to 7% by energy. Thus, we have obtained the composition corresponding to hythane fuel in carbon nanospaces with greatly enhanced volumetric energy in comparison to the traditional compression method. We proposed the simple system with added extra container filled with pure free/adsorbed methane for adjusting the composition of the desorbed mixture as needed during delivery. Our simulation results indicate that light slit pore carbon nanomaterials with optimized parameters are suitable filling vessels for storage of hythane fuel. The proposed simple system consisting of main vessel with physisorbed hythane fuel, and an extra container filled with pure free/adsorbed methane will be particularly suitable for combustion of hythane fuel in buses and passenger cars near ambient temperatures and low pressures.

AVALIAÇÃO CEFALOMÉTRICA DAS ALTERAÇÕES SAGITAIS E VERTICAIS EM PACIENTES SUBMETIDOS À EXPANSÃO RÁPIDA DA MAXILA ASSISTIDA CIRURGICAMENTE

O presente estudo teve como objetivos avaliar cefalometricamente as alterações esqueléticas, dentárias e de tecidos moles, no sentido sagital e vertical em pacientes submetidos à expansão rápida da maxila assistida cirurgicamente. A amostra constituiu-se de 51 telerradiografias em norma lateral de 17 pacientes adultos, brasileiros, sendo 6 do sexo masculino e 11 do sexo feminino, com idade média de 24 anos e 1 mês e severa deficiência transversa da maxila. As telerradiografias foram obtidas no início do tratamento (T1), após o procedimento de ERMAC (T2), e após três meses de contenção com o próprio aparelho disjuntor (T3). A partir da análise e discussão dos resultados, observouse rotação da maxila e da mandíbula no sentido horário, havendo, como conseqüência, aumento da AFAI. Após 3 meses de contenção, houve recidiva considerando-se o aumento da AFAI. Houve extrusão dos incisivos superiores, na qual foi mantida no período de contenção. Durante a contenção, houve também retrusão dos incisivos superiores. Considerando-se aos molares superiores, houve extrusão após a expansão, acompanhada de uma recidiva com menor magnitude quando comparada ao efeito da expansão obtida. Não houve alteração dos tecidos moles quanto a espessura nasal e houve retrusão do lábio superior, lábio inferior e pogônio mole, acompanhando a parte esquelética. Houve aumento do ângulo nasolabial.

DETERMINAÇÃO DA POSIÇÃO DE REPOUSO DA LÍNGUA EM INDIVÍDUOS COM OCLUSÃO DENTÁRIA NORMAL

O propósito neste estudo foi determinar a posição de repouso da língua em indivíduos com oclusão dentária normal e respiração nasal, por meio de telerradiografias em norma lateral realizadas após a ingestão de bário. A amostra foi composta por 66 radiografias de indivíduos brancos com oclusão dentária normal, sendo 26 do sexo masculino e 40 do sexo feminino, na faixa etária de 12 a 21 anos de idade, procedentes de escolas da região do Grande ABC Paulista. O critério utilizado para diagnóstico da oclusão normal foi As Seis Chaves para a Oclusão Normal preconizadas por Andrews (1972), devendo estar presentes no mínimo quatro das seis chaves, sendo obrigatória a presença da primeira chave de oclusão que é a da relação interarcos. As radiografias foram obtidas com o indivíduo em posição natural da cabeça após a ingestão de contraste de sulfato de bário para evidenciar o controle da língua. Posteriormente foi feito o desenho anatômico das estruturas pesquisadas, marcados os pontos cefalométricos, traçadas as linhas e os planos, e por último obtidas as seguintes medidas lineares: comprimento e altura da língua, distância do dorso da língua na sua porção média até o palato duro e a distância entre a ponta da língua e a incisal do incisivo inferior. Por meio dos resultados encontrados verificou-se que não existe um padrão único de posicionamento de repouso da língua dentro da cavidade oral, em pacientes respiradores nasais, variando muito sua distância até a incisal dos incisivos inferiores, bem como até o palato duro, havendo uniformidade apenas no fato da língua tocar o palato mole em todos os indivíduos da amostra. Não houve relação estatisticamente significante entre a posição de repouso da língua e os biotipos faciais e nem dimorfismo sexual.

Broader or deeper? Exploring the most effective intervention profile for public small business support

Most advanced economies offer publicly financed advice services to start-up firms and SMEs. In England, local or regional Business Links organisations have provided these services, and divided their support into nonintensive one-off contacts providing information or advice and more intensive support involving a diagnostic process and repeated interaction with firms. A key choice for Business Link managers is how to shape their intervention strategies, balancing resources between intensive and nonintensive support. Drawing on resource dependency theory, we develop a typology of intervention strategies for Business Links in England which reflects differences in the breadth and depth of the support provided. We then test the impacts of these alternative intervention models on client companies using both subjective assessments by firms and econometric treatment models that allow for selection bias. Our key empirical result is that Business Links’ choice of intervention strategy has a significant effect both on actual and on perceived business outcomes, with our results emphasising the value of depth over breadth. The implication is that where additional resources are available for business support these should be used to deepen the assistance provided rather than extend assistance to a wider group of firms.

Economic impact study of business link local service:final report

Final report evaluating the impact of Business Link local services on those businesses that received assistance in the 6 month period April to September 2003 and its impact over the subsequent period to May/June 2005"--BERR website (Reports & Publications).

Differential gains from Business Link support and advice:a treatment effects approach

The provision of advisory support to small firms is almost ubiquitous in OECD countries, although it is organised in different ways and is justified on slightly different grounds. In England publicly supported advisory services are provided through the Business Link (BL) network. Here, we consider two questions: what sort of companies receive advisory support from BL; and, what types of firms benefit most from that support? Our analysis is based on a telephone survey of 2000 firms, around half of which had received intensive assistance from BL between April and October 2003. Probit analysis suggests that the probability of receiving assistance was greater among younger businesses, those with larger numbers of directors in the firm, and those with more gender diversity among the firm's leadership team. Our business-growth models suggest that BL intensive assistance was having a positive effect on employment growth in 2003. BL had a positive but insignificant impact on sales growth over the period. Employment growth effects tend to be larger where firms have a management and organisational structure, which is more conducive to absorbing and making use of external advice. The analysis suggests that BL might increase its impact through targeting these larger, more export-orientated, businesses. Employment growth effects differ little, however, depending on either the ethnic or the gender diversity of the leadership team.

Assessing the effectiveness of business support services in England:evidence from a theory based evaluation

In England, publicly supported advice to small firms is organized primarily through the Business Link (BL) network. Using the programme theory underlying this business support, we develop four propositions and test these empirically using data from a new survey of over 3000 English SMEs. We find strong support for the value to BL operators of a high profile to boost take-up. We find support for the BL’s market segmentation that targets intensive assistance to younger firms and those with limited liability. Allowing for sample selection, we find no significant effects on growth from ‘other’ assistance but find a significant employment boost from intensive assistance. This partially supports the programme theory assertion that BL improves business growth and strongly supports the proposition that there are differential outcomes from intensive and other assistance. This suggests an improvement in the BL network, compared with earlier studies, notably Roper et al. (2001), Roper and Hart (2005).

Liquid-phase adsorption of n-paraffins on type 5A molecular sieves

As a basis for the commercial separation of normal paraffins a detailed study has been made of factors affecting the adsorption of binary liquid mixtures of high molecular weight normal paraffins (C12, C16, and C20) from isooctane on type 5A molecular sieves. The literature relating to molecular sieve properties and applications, and to liquid-phase adsorption of high molecular weight normal paraffin compounds by zeolites, was reviewed. Equilibrium isotherms were determined experimentally for the normal paraffins under investigation at temperatures of 303oK, 323oK and 343oK and showed a non-linear, favourable- type of isotherm. A higher equilibrium amount was adsorbed with lower molecular weight normal paraffins. An increase in adsorption temperature resulted in a decrease in the adsorption value. Kinetics of adsorption were investigated for the three normal paraffins at different temperatures. The effective diffusivity and the rate of adsorption of each normal paraffin increased with an increase in temperature in the range 303 to 343oK. The value of activation energy was between 2 and 4 kcal/mole. The dynamic properties of the three systems were investigated over a range of operating conditions (i.e. temperature, flow rate, feed concentration, and molecular sieve size in the range 0.032 x 10-3 to 2 x 10-3m) with a packed column. The heights of adsorption zones calculated by two independent equations (one based on a constant width, constant velocity and adsorption zone and the second on a solute material balance within the adsorption zone) agreed within 3% which confirmed the validity of using the mass transfer zone concept to provide a simple design procedure for the systems under study. The dynamic capacity of type 5A sieves for n-eicosane was lower than for n-hexadecane and n-dodecane corresponding to a lower equilibrium loading capacity and lower overall mass transfer coefficient. The values of individual external, internal, theoretical and experimental overall mass transfer coefficient were determined. The internal resistance was in all cases rate-controlling. A mathematical model for the prediction of dynamic breakthrough curves was developed analytically and solved from the equilibrium isotherm and the mass transfer rate equation. The experimental breakthrough curves were tested against both the proposed model and a graphical method developed by Treybal. The model produced the best fit with mean relative percent deviations of 26, 22, and 13% for the n-dodecane, n-hexadecane, and n-eicosane systems respectively.