PV systems linked to the grid: parameter identification with a heuristic procedure

This paper focuses on a PV system linked to the electric grid by power electronic converters, identification of the five parameters modeling for photovoltaic systems and the assessment of the shading effect. Normally, the technical information for photovoltaic panels is too restricted to identify the five parameters. An undemanding heuristic method is used to find the five parameters for photovoltaic systems, requiring only the open circuit, maximum power, and short circuit data. The I- V and the P- V curves for a monocrystalline, polycrystalline and amorphous photovoltaic systems are computed from the parameters identification and validated by comparison with experimental ones. Also, the I- V and the P- V curves under the effect of partial shading are obtained from those parameters. The modeling for the converters emulates the association of a DC-DC boost with a two-level power inverter in order to follow the performance of a testing commercial inverter employed on an experimental system. © 2015 Elsevier Ltd.

Functional studies on magnetic resonance

Dissertation submitted in Faculdade de Ciências e Tecnologia of Universidade Nova de Lisboa for the degree of Master in Biomedical Engineering

Multiobjective optimization of viscoelastic laminated sandwich structures using the Direct MultiSearch method

A multiobjective approach for optimization of passive damping for vibration reduction in sandwich structures is presented in this paper. Constrained optimization is conducted for maximization of modal loss factors and minimization of weight of sandwich beams and plates with elastic laminated constraining layers and a viscoelastic core, with layer thickness and material and laminate layer ply orientation angles as design variables. The problem is solved using the Direct MultiSearch (DMS) solver for derivative-free multiobjective optimization and solutions are compared with alternative ones obtained using genetic algorithms.

The 1853-1856 cholera morbus epidemic in Portugal as seen by the press

This research is part of a larger project focused on producing a History of the Popularization of Science and Technology in Portugal. The goal is to find out how scientific knowledge reached the common people in the nineteenth century, using newspapers as the main source of information. Keeping in mind the population’s limited access to written material, nevertheless each newspaper could be read daily by an estimate 30.000 people in Lisbon, which places this source as probably the most widespread vehicle to divulge the latest scientific news at the time to an unspecialised audience. With a cholera morbus epidemic which affected the second largest Portuguese town and all the northern regions, as well as the Algarve, news and reports on its evolution were considered essential. A large database was built in order to analyse the news concerning this disease in 1855 and 1856, especially the ones about prevention and treatment. These are important historical sources that give us real information on the scientific knowledge of the time and the way it was used by society.

A interação das marcas com o público através do Facebook: o mercado dos smartphones e as marcas Samsung e Apple

Dissertação de Mestrado apresentado ao Instituto de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Marketing Digital sob orientação de Sandrina Teixeira Anabela Ribeiro

Impacto da NCRF 27 no capital próprio das cooperativas vitivinícolas da região demarcada do Douro

Dissertação de Mestrado apresentada ao Instituto de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Contabilidade e Finanças, sob orientação de Professora Doutora Ana Maria Alves Bandeira, e Professora Doutora Deolinda Maria Moreira Aparício Meira

An attemp at reversibility and increase of the virulence of axenic strains of Entamoeba histolytica

In this study we have tried to verify whether the interaction "in vitro" with bacteria or small pieces of normal hamster liver would modify the pathogenic behavior of axenic strains of E. histolytica: avirulent ones (ICB-32 and ICB-RPS), of attenuated virulence (ICB-CSP and HM1) and of mean virulence (ICB-462). Every attempt to render virulent, recover or increase the virulence of axenic strains of E. histolytica has failed

A hybrid procedure to identify the optimal stiffness coefficients of elastically restrained beams

The formulation of a bending vibration problem of an elastically restrained Bernoulli-Euler beam carrying a finite number of concentrated elements along its length is presented. In this study, the authors exploit the application of the differential evolution optimization technique to identify the torsional stiffness properties of the elastic supports of a Bernoulli-Euler beam. This hybrid strategy allows the determination of the natural frequencies and mode shapes of continuous beams, taking into account the effect of attached concentrated masses and rotational inertias, followed by a reconciliation step between the theoretical model results and the experimental ones. The proposed optimal identification of the elastic support parameters is computationally demanding if the exact eigenproblem solving is considered. Hence, the use of a Gaussian process regression as a meta-model is addressed. An experimental application is used in order to assess the accuracy of the estimated parameters throughout the comparison of the experimentally obtained natural frequency, from impact tests, and the correspondent computed eigenfrequency.

Exploiting the bin-class histograms for feature selection on discrete data

In machine learning and pattern recognition tasks, the use of feature discretization techniques may have several advantages. The discretized features may hold enough information for the learning task at hand, while ignoring minor fluctuations that are irrelevant or harmful for that task. The discretized features have more compact representations that may yield both better accuracy and lower training time, as compared to the use of the original features. However, in many cases, mainly with medium and high-dimensional data, the large number of features usually implies that there is some redundancy among them. Thus, we may further apply feature selection (FS) techniques on the discrete data, keeping the most relevant features, while discarding the irrelevant and redundant ones. In this paper, we propose relevance and redundancy criteria for supervised feature selection techniques on discrete data. These criteria are applied to the bin-class histograms of the discrete features. The experimental results, on public benchmark data, show that the proposed criteria can achieve better accuracy than widely used relevance and redundancy criteria, such as mutual information and the Fisher ratio.

Impact of europeanization in policy network governance pattrons

Comunicação apresentada na 30th Sunbelt Social Networks Conference, em Riva del Garda, Itália, a 3 de Julho de 2010.

Estimation of rotational frequency response functions

As it is widely known, in structural dynamic applications, ranging from structural coupling to model updating, the incompatibility between measured and simulated data is inevitable, due to the problem of coordinate incompleteness. Usually, the experimental data from conventional vibration testing is collected at a few translational degrees of freedom (DOF) due to applied forces, using hammer or shaker exciters, over a limited frequency range. Hence, one can only measure a portion of the receptance matrix, few columns, related to the forced DOFs, and rows, related to the measured DOFs. In contrast, by finite element modeling, one can obtain a full data set, both in terms of DOFs and identified modes. Over the years, several model reduction techniques have been proposed, as well as data expansion ones. However, the latter are significantly fewer and the demand for efficient techniques is still an issue. In this work, one proposes a technique for expanding measured frequency response functions (FRF) over the entire set of DOFs. This technique is based upon a modified Kidder's method and the principle of reciprocity, and it avoids the need for modal identification, as it uses the measured FRFs directly. In order to illustrate the performance of the proposed technique, a set of simulated experimental translational FRFs is taken as reference to estimate rotational FRFs, including those that are due to applied moments.

Design of a Mobile Application for Eye Signs Screening

Mestrado em Engenharia Computação e Instrumentação Médica

Determinantes à receptividade ao bluetooth marketing pelo consumidor português

Dissertação de Mestrado apresentada ao Instituto Superior de Contabilidade e Administração do Porto para a obtenção do grau de Mestre em Marketing Digital, sob orientação do Mestre Paulo Gonçalves e da Doutora Madalena Vilas Boas Esta versão não contém as críticas e sugestões dos elementos do júri

Classificação e agregação automática de notícias desportivas

Mestrado em Engenharia Informática - Área de Especialização em Arquiteturas, Sistemas e Redes

An ontology roadmap for crowdsourcing innovation intermediaries

Ontologies have proliferated in the last years, essentially justified by the need of achieving a consensus in the multiple representations of reality inside computers, and therefore the accomplishment of interoperability between machines and systems. Ontologies provide an explicit conceptualization that describes the semantics of the data. Crowdsourcing innovation intermediaries are organizations that mediate the communication and relationship between companies that aspire to solve some problem or to take advantage of any business opportunity with a crowd that is prone to give ideas based on their knowledge, experience and wisdom, taking advantage of web 2.0 tools. Various ontologies have emerged, but at the best of our knowledge, there isn’t any ontology that represents the entire process of intermediation of crowdsourcing innovation. In this paper we present an ontology roadmap for developing crowdsourcing innovation ontology of the intermediation process. Over the years, several authors have proposed some distinct methodologies, by different proposals of combining practices, activities, languages, according to the project they were involved in. We start making a literature review on ontology building, and analyse and compare ontologies that propose the development from scratch with the ones that propose reusing other ontologies. We also review enterprise and innovation ontologies known in literature. Finally, are presented the criteria for selecting the methodology and the roadmap for building crowdsourcing innovation intermediary ontology.