Application of real-time and multiplex PCR assays to study leaf blotch epidemics in barley

Leaf blotch, caused by Rhynchosporium secalis, was studied in a range of winter barley cultivars using a combination of traditional plant pathological techniques and newly developed multiplex and real-time polymerase chain reaction (PCR) assays. Using PCR, symptomless leaf blotch colonization was shown to occur throughout the growing season in the resistant winter barley cv. Leonie. The dynamics of colonization throughout the growing season were similar in both Leonie and Vertige, a susceptible cultivar. However, pathogen DNA levels were approximately 10-fold higher in the susceptible cultivar, which expressed symptoms throughout the growing season. Visual assessments and PCR also were used to determine levels of R. secalis colonization and infection in samples from a field experiment used to test a range of winter barley cultivars with different levels of leaf blotch resistance. The correlation between the PCR and visual assessment data was better at higher infection levels (R(2) = 0.81 for leaf samples with >0.3% disease). Although resistance ratings did not correlate well with levels of disease for all cultivars tested, low levels of infection were observed in the cultivar with the highest resistance rating and high levels of infection in the cultivar with the lowest resistance rating.

Declining survival rates in a reintroduced population of the Mauritius kestrel: evidence for non-linear density dependence and environmental stochasticity

1. We studied a reintroduced population of the formerly critically endangered Mauritius kestrel Falco punctatus Temmink from its inception in 1987 until 2002, by which time the population had attained carrying capacity for the study area. Post-1994 the population received minimal management other than the provision of nestboxes. 2. We analysed data collected on survival (1987-2002) using program MARK to explore the influence of density-dependent and independent processes on survival over the course of the population's development. 3.We found evidence for non-linear, threshold density dependence in juvenile survival rates. Juvenile survival was also strongly influenced by climate, with the temporal distribution of rainfall during the cyclone season being the most influential climatic variable. Adult survival remained constant throughout. 4. Our most parsimonious capture-mark-recapture statistical model, which was constrained by density and climate, explained 75.4% of the temporal variation exhibited in juvenile survival rates over the course of the population's development. 5. This study is an example of how data collected as part of a threatened species recovery programme can be used to explore the role and functional form of natural population regulatory processes. With the improvements in conservation management techniques and the resulting success stories, formerly threatened species offer unique opportunities to further our understanding of the fundamental principles of population ecology.

Design and evaluation of intelligent classifier based intrusion detection system

We have discovered a novel approach of intrusion detection system using an intelligent data classifier based on a self organizing map (SOM). We have surveyed all other unsupervised intrusion detection methods, different alternative SOM based techniques and KDD winner IDS methods. This paper provides a robust designed and implemented intelligent data classifier technique based on a single large size (30x30) self organizing map (SOM) having the capability to detect all types of attacks given in the DARPA Archive 1999 the lowest false positive rate being 0.04 % and higher detection rate being 99.73% tested using full KDD data sets and 89.54% comparable detection rate and 0.18% lowest false positive rate tested using corrected data sets.

Tools for regularizing Array Designs

This paper makes a contribution in bridging the theory and practice of the polyhedral model for designing parallel algorithms. Although the theory of polyhedral model is well developed, designers of massively parallel algorithms are unable to benefit from the theory due to the lack of software tools that incorporate the wide range of transformations that are possible in the model. The Uniformization tool that we developed was the first to integrate a number of techniques and to completely automate the transformation step allowing designers to explore a wide range of feasible designs from high-level specifications.

The Namib Sand Sea digital database of aeolian dunes and key forcing variables

A new digital atlas of the geomorphology of the Namib Sand Sea in southern Africa has been developed. This atlas incorporates a number of databases including a digital elevation model (ASTER and SRTM) and other remote sensing databases that cover climate (ERA-40) and vegetation (PAL and GIMMS). A map of dune types in the Namib Sand Sea has been derived from Landsat and CNES/SPOT imagery. The atlas also includes a collation of geochronometric dates, largely derived from luminescence techniques, and a bibliographic survey of the research literature on the geomorphology of the Namib dune system. Together these databases provide valuable information that can be used as a starting point for tackling important questions about the development of the Namib and other sand seas in the past, present and future.

Non-stoichiometric oxide and metal interfaces and reactions

We have employed a combination of experimental surface science techniques and density functional calculations to study the reduction of TiO2(110) surfaces through the doping with submonolayer transition metals. We concentrate on the role of Ti adatoms in self doping of rutile and contrast the behaviour to that of Cr. DFT+U calculations enable identification of probable adsorption structures and their spectroscopic characteristics. Adsorption of both metals leads to a broken symmetry and an asymmetric charge transfer localised around the defect site of a mixed localised/delocalised character. Charge transfer creates defect states with Ti 3d character in the band gap at similar to 1-eV binding energy. Cr adsorption, however, leads to a very large shift in the valence-band edge to higher binding energy and the creation of Cr 3d states at 2.8-eV binding energy. Low-temperature oxidation lifts the Ti-derived band-gap states and modifies the intensity of the Cr features, indicative of a change of oxidation state from Cr3+ to Cr4+. Higher temperature processing leads to a loss of Cr from the surface region, indicative of its substitution into the bulk.

Design and fabrication of infrared filters for remote sounding instrumentation

Cooled infrared filters have been used in pressure modulation and filter radiometry to measure the dynamics, temperature distribution and concentrations of atmospheric elements in various satellite radiometers. Invariably such instruments use precision infrared bandpass filters and coatings for spectral selction, often operating at cryogenic temperatures. More recent developments in the use of spectrally-selective cooled detectors in focal plane arrays have simplified the optical layout and reduced the component count of radiometers but have placed additional demands on both the spectral and physical performance requirements of the filters. This paper describes and contrasts the more traditional radiometers using discrete detectors with those which use focal plane detector array technology, with particular emphasis on the function of the filters and coatings in the two cases. Additionally we discuss the spectral techniques and materials used to fabricate infrared coatings and filters for use in space optics, and give examples of their application in the fabrication of some demanding long wavelength dichroics and filters. We also discuss the effects of the space environment on the stability and durability of high performance infrared filters and materials exposed to low Earth orbit for 69 months on the NASA Long Duration Exposure Facility (LDEF).

Modula-2 applied

Programming is a skill which requires knowledge of both the basic constructs of the computer language used and techniques employing these constructs. How these are used in any given application is determined intuitively, and this intuition is based on experience of programs already written. One aim of this book is to describe the techniques and give practical examples of the techniques in action - to provide some experience. Another aim of the book is to show how a program should be developed, in particular how a relatively large program should be tackled in a structured manner. These aims are accomplished essentially by describing the writing of one large program, a diagram generator package, in which a number of useful programming techniques are employed. Also, the book provides a useful program, with an in-built manual describing not only how the program works, but also how it does it, with full source code listings. This means that the user can, if required, modify the package to meet particular requirements. A floppy disk is available from the publishers containing the program, including listings of the source code. All the programs are written in Modula-2, using JPI's Top Speed Modula-2 system running on IBM-PCs and compatibles. This language was chosen as it is an ideal language for implementing large programs and it is the main language taught in the Cybernetics Department at the University of Reading. There are some aspects of the Top Speed implementation which are not standard, so suitable comments are given when these occur. Although implemented in Modula-2, many of the techniques described here are appropriate to other languages, like Pascal of C, for example. The book and programs are based on a second year undergraduate course taught at Reading to Cybernetics students, entitled Algorithms and Data Structures. Useful techniques are described for the reader to use, applications where they are appropriate are recommended, but detailed analyses of the techniques are not given.

Bistability of the Atlantic overturning circulation in a global climate model and links to ocean freshwater transport

The possibility of a rapid collapse in the strength of the Atlantic meridional overturning circulation (AMOC), with associated impacts on climate, has long been recognized. The suggested basis for this risk is the existence of two stable regimes of the AMOC (‘on’ and ‘off’), and such bistable behaviour has been identified in a range of simplified climate models. However, up to now, no state-of-the-art atmosphere-ocean coupled global climate model (AOGCM) has exhibited such behaviour, leading to the interpretation that the AMOC is more stable than simpler models indicate. Here we demonstrate AMOC bistability in the response to freshwater perturbations in the FAMOUS AOGCM - the most complex AOGCM to exhibit such behaviour to date. The results also support recent suggestions that the direction of the net freshwater transport at the southern boundary of the Atlantic by the AMOC may be a useful physical indicator of the existence of bistability. We also present new estimates for this net freshwater transport by the AMOC from a range of ocean reanalyses which suggest that the Atlantic AMOC is currently in a bistable regime, although with large uncertainties. More accurate observational constraints, and an improved physical understanding of this quantity, could help narrow uncertainty in the future evolution of the AMOC and to assess the risk of a rapid AMOC collapse.

Life histories of academics who become heads of department: socialisation, identity and career trajectory

Although the role of the academic head of department (HoD) has always been important to university management and performance, an increasing significance given to bureaucracy, academic performance and productivity, and government accountability has greatly elevated the importance of this position. Previous research and anecdotal evidence suggests that as academics move into HoD roles, usually with little or no training, they experience a problem of struggling to adequately manage key aspects of their role. It is this problem – and its manifestations – that forms the research focus of this study. Based on the research question, “What are the career trajectories of academics who become HoDs in a selected post-1992 university?” the study aimed to achieve greater understanding of why academics become HoDs, what it is like being a HoD, and how the experience influences their future career plans. The study adopts an interpretive approach, in line with social constructivism. Edited topical life history interviews were undertaken with 17 male and female HoDs, from a range of disciplines, in a post-1992 UK university. These data were analysed using coding, categorisation and theme formation techniques and developing profiles of each of the respondents. The findings from this study suggest that academics who become HoDs not only need the capacity to assume a range of personal and professional identities, but need to regularly adopt and switch between them. Whether individuals can successfully balance and manage these multiple identities, or whether they experience major conflicts and difficulties within or between them, greatly affects their experiences of being a HoD and may influence their subsequent career decisions. It is claimed that the focus, approach and analytical framework - based on the interrelationships between the concepts of socialisation, identity and career trajectory - provide a distinct and original contribution to knowledge in this area. Although the results of this study cannot be generalised, the findings may help other individuals and institutions move towards a firmer understanding of the academic who becomes HoD - in relation to theory, practice and future research.

Benchmark datasets for detection and tracking

There is a rising demand for the quantitative performance evaluation of automated video surveillance. To advance research in this area, it is essential that comparisons in detection and tracking approaches may be drawn and improvements in existing methods can be measured. There are a number of challenges related to the proper evaluation of motion segmentation, tracking, event recognition, and other components of a video surveillance system that are unique to the video surveillance community. These include the volume of data that must be evaluated, the difficulty in obtaining ground truth data, the definition of appropriate metrics, and achieving meaningful comparison of diverse systems. This chapter provides descriptions of useful benchmark datasets and their availability to the computer vision community. It outlines some ground truth and evaluation techniques, and provides links to useful resources. It concludes by discussing the future direction for benchmark datasets and their associated processes.