Analysis of the genotoxic potential of low concentrations of Malathion on the Allium cepa cells and rat hepatoma tissue culture

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fluoride concentrations of milk, infant formulae, and soy-based products commercially available in Brazil

To assess the fluoride (F) content in commercially available milk formulae in Brazil and to estimate the F intake in children from this source in the first year of life. Samples of cow's milk (n = 51), infant formulae (n = 15), powdered milk (n = 13), and soy-based products (n = 4) purchased in Araçatuba (Brazil) had their F content measured using an ion-specific electrode, after hexamethyldisiloxane-facilitated diffusion. Powdered milk and infant formulae were reconstituted with deionized water, while ready-to-drink products were analyzed without any dilution. Using average infant body masses and suggested volumes of formula consumption for infants 1-12 months of age, possible F ingestion per body mass was estimated. Data were analyzed by descriptive analysis. Mean F content ranged from 0.02 to 2.52 mg/L in all samples. None of the cow's milk provided F intake higher than 0.07 mg/kg. However, two infant formulae, one powdered milk, and one soy-milk led to a daily F intake above the suggested threshold for fluorosis when reconstituted with deionized water. Assuming reconstitution of products with tap water at 0.7 ppm F, two infant formulae, five powdered milk, and four soymilks led to daily F intake ranging from 0.108 to 0.851 mg/kg. The results suggest that the consumption of some brands of infant formulae, powdered milk, and soy-based milk in the first year of age could increase the risk of dental fluorosis, reinforcing the need for periodic surveillance of the F content of foods and beverages typically consumed by young children.

Influence of crown-to-implant ratio, retention system, restorative material, and occlusal loading on stress concentrations in single short implants

Purpose: The aim of this study was to assess the contributions of some prosthetic parameters such as crown-to-implant (C/I) ratio, retention system, restorative material, and occlusal loading on stress concentrations within a single posterior crown supported by a short implant. Materials and Methods: Computer-aided design software was used to create 32 finite element models of an atrophic posterior partially edentulous mandible with a single external-hexagon implant (5 mm wide × 7 mm long) in the first molar region. Finite element analysis software with a convergence analysis of 5% to mesh refinement was used to evaluate the effects of C/I ratio (1:1; 1.5:1; 2:1, or 2.5:1), prosthetic retention system (cemented or screwed), and restorative material (metal-ceramic or all ceramic). The crowns were loaded with simulated normal or traumatic occlusal forces. The maximum principal stress (σmax) for cortical and cancellous bone and von Mises stress (σvM) for the implant and abutment screw were computed and analyzed. The percent contribution of each variable to the stress concentration was calculated from the sum of squares analysis. Results: Traumatic occlusion and a high C/I ratio increased stress concentrations. The C/I ratio was responsible for 11.45% of the total stress in the cortical bone, whereas occlusal loading contributed 70.92% to the total stress in the implant. The retention system contributed 0.91% of the total stress in the cortical bone. The restorative material was responsible for only 0.09% of the total stress in the cancellous bone. Conclusion: Occlusal loading was the most important stress concentration factor in the finite element model of a single posterior crown supported by a short implant.

Impact of sub-inhibitory concentrations of amoxicillin on helicobacter pylori virulence factors

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estresse salino em plantas jovens de cana-deaçúcar: respostas bioquímicas e fisiológicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determinação in situ de metilmercúrio e mercúrio (II) em sistemas aquáticos nas proximidades de refinarias de petróleo, utilizando a técnica difusão em filmes finos por gradiente de concentração (DGT)

Pós-graduação em Geociências e Meio Ambiente - IGCE

Caracterização funcional de um fator de transcrição hipotético no fungo Neurospora crassa

Pós-graduação em Biotecnologia - IQ

Produção da cultura da beterraba irrigada com água salina.,

The use of low quality water for agriculture should be performed with care to avoiding excessive accumulation of salts in the soil so not to harm crop development. In order to evaluate the performance of beets under the infl uence of low water quality, an experiment was conducted in a greenhouse of the Department of Agricultural Engineering, Universidade Estadual Paulista in Botucatu, Brazil, from April to July 2012. We used the beet (Beta vulgaris L.) in a completely randomized design with 6 treatments and 5 replications, totaling 30 plots. Treatments consisted of NaCl solutions at different concentrations (2.0, 3.0, 4.0, 5.0 and 6.0 dS m-1) plus a control treatment corresponding to water with no additional salt and electrical conductivity of roughly 0.26 dS m-1. Variables evaluated were total production, commercial production, plant height, number of plants and root diameter. Production of the beet crop was affected by the increasing salinity of irrigation water, characterized by reduced root production of the beets. Total and commercial production showed reductions of 8.82 and 12.2% in accordance with the unit increase of salinity.

Sementes de leguminosas forrageiras sob estresse salino tratadas com ácido salicílico e espermidina

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Interação entre bactérias cariogênicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Agua de reuso e seu efeito sobre parâmetros fisiológicos em manjericão (Ocimum basilicum L.)

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Seasonal Carbon Dioxide and Oxygen Concentrations in the Dens of Hibernating Mammals (Sciuridae)

This paper reports seasonal changes in respiratory gases in artificial dens of two species of hibernators indigenous to central and northern Alaska: Citellus parryi ablusus(Osgood) and Marmota broweri Hall and Gilmore (Sciuridae).

Agua de reuso e seu efeito sobre parâmetros fisiológicos em manjericão (Ocimum basilicum L.)

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Application of Mossbauer spectroscopy to the study of corrosion resistance in NaCl solution of plasma nitrided AISI 316L stainless steel

Corrosion research in steels is one of the areas in which Mossbauer spectroscopy has become a required analytical technique, since it is a powerful tool for both identifying and quantifying distinctive phases (which contain Fe) with accuracy. In this manuscript, this technique was used to the study of corrosion resistance of plasma nitrided AISI 316L samples in the presence of chloride anions. Plasma nitriding has been carried out using dc glow-discharge, nitriding treatments, in medium of 80 vol.% H-2 and 20 vol.% N-2, at 673 K, and at different time intervals: 2, 4, and 7 h. Treated samples were characterized by means of phase composition and morphological analysis, and electrochemical tests in NaCl aerated solution in order to investigate the influence of treatment time on the microstructure and the corrosion resistance, proved by conversion electron Mossbauer spectroscopy (CEMS), glancing angle X-ray diffraction (GAXRD), scanning electron microscopy (SEM) and potentiodynamic polarization. A modified layer of about 8 gin was observed for all the nitrided samples, independently of the nitriding time. A metastable phase, S phase or gamma(N), was produced. It seems to be correlated with gamma`-Fe-4 N phase. If the gamma(N) fraction decreases, the gamma` fraction increases. The gamma(N) magnetic nature was analyzed. When the nitriding time increases, the results indicate that there is a significant reduction in the relative fraction of the magnetic gamma(N) (in) phase. In contrast, the paramagnetic gamma(N) (p) phase increases. The GAXRD analysis confirms the Mossbauer results, and it also indicates CrN traces for the sample nitrided for 7 h. Corrosion results demonstrate that time in the plasma nitriding treatment plays an important role for the corrosion resistance. The sample treated for 4 h showed the best result of corrosion resistance. It seems that the epsilon/gamma` fraction ratio plays an important role in thin corrosion resistance since this sample shows the maximum value for this ratio. (c) 2008 Published by Elsevier B.V.

Assessment of metal and trace element concentrations in the Cananeia estuary, Brazil, by neutron activation and atomic absorption techniques

Twenty six bottom sediment samples were collected from the Cananeia estuary in summer and winter of 2005. Multielemental analysis was carried out by instrumental neutron activation analysis. Total mercury was determined by cold vapor atomic absorption. As, Cr, Hg and Zn concentrations were compared to the Canadian oriented values (TEL and PEL). Sample points 4 and 9 presented higher concentration for most elements and As and Cr exceeded the TEL values. Organic matter (>10%) associated with siltic and clay sediments was observed. Climatic conditions, hydrodynamic and biogeochemical processes promote differences in seasonal concentrations of elements at some points, which contribute to special distributions.