Musculoskeletal tissue regeneration by human non-embryonic stem cells

The aim of this thesis was to investigate the regenerative potential of alternative sources of stem cells, derived from human dental pulp (hDPSCs) and amniotic fluid (hAFSCs) and, specifically, to evaluate their capability to be committed towards osteogenic and myogenic lineages, for the eventual applicability of these stem cells to translational strategies in regenerative medicine of bone and skeletal muscle tissues. The in vitro bone production by stem cells may represent a radical breakthrough in the treatment of pathologies and traumas characterized by critical bone mass defects, with no medical or surgical solution. Human DPSCs and AFSCs were seeded and pre-differentiated on different scaffolds to test their capability to subsequently reach the osteogenic differentiation in vivo, in order to recover critical size bone defects. Fibroin scaffold resulted to be the best scaffold promoting mature bone formation and defect correction when combined to both hDPSCs and hAFSCs. This study also described a culture condition that might allow human DPSCs to be used for human cell therapy in compliance with good manufacturing practices (GMPs): the use of human serum (HS) promoted the expansion and the osteogenic differentiation of hDPSCs in vitro and, furthermore, allowed pre-differentiated hDPSCs to regenerate critical size bone defects in vivo. This thesis also showed that hDPSCs and hAFSCs can be differentiated towards the myogenic lineage in vitro, either when co-cultured with murine myoblasts and when differentiated alone after DNA demethylation treatment. Interestingly, when injected into dystrophic muscles of SCID/mdx mice - animal model of Duchenne Muscular Dystrophy (DMD) - hDPSCs and hAFSCs pre-differentiated after demethylating treatment were able to regenerate the skeletal muscle tissue and, particularly, to restore dystrophin expression. These observations suggest that human DPSCs and AFSCs might be eventually applied to translational strategies, in order to enhance the repair of injured skeletal muscles in DMD patients.

Studio del metodo dell'assorbimento diretto della CO2 per l'analisi del radiocarbonio

L’attuale rilevanza rappresentata dalla stretta relazione tra cambiamenti climatici e influenza antropogenica ha da tempo posto l’attenzione sull’effetto serra e sul surriscaldamento planetario così come sull’aumento delle concentrazioni atmosferiche dei gas climaticamente attivi, in primo luogo la CO2. Il radiocarbonio è attualmente il tracciante ambientale per eccellenza in grado di fornire mediante un approccio “top-down” un valido strumento di controllo per discriminare e quantificare il diossido di carbonio presente in atmosfera di provenienza fossile o biogenica. Ecco allora che ai settori applicativi tradizionali del 14C, quali le datazioni archeometriche, si affiancano nuovi ambiti legati da un lato al settore energetico per quanto riguarda le problematiche associate alle emissioni di impianti, ai combustibili, allo stoccaggio geologico della CO2, dall’altro al mercato in forte crescita dei cosiddetti prodotti biobased costituiti da materie prime rinnovabili. Nell’ambito del presente lavoro di tesi è stato quindi esplorato il mondo del radiocarbonio sia dal punto di vista strettamente tecnico e metodologico che dal punto di vista applicativo relativamente ai molteplici e diversificati campi d’indagine. E’ stato realizzato e validato un impianto di analisi basato sul metodo radiometrico mediante assorbimento diretto della CO2 ed analisi in scintillazione liquida apportando miglioramenti tecnologici ed accorgimenti procedurali volti a migliorare le performance del metodo in termini di semplicità, sensibilità e riproducibilità. Il metodo, pur rappresentando generalmente un buon compromesso rispetto alle metodologie tradizionalmente usate per l’analisi del 14C, risulta allo stato attuale ancora inadeguato a quei settori applicativi laddove è richiesta una precisione molto puntuale, ma competitivo per l’analisi di campioni moderni ad elevata concentrazione di 14C. La sperimentazione condotta su alcuni liquidi ionici, seppur preliminare e non conclusiva, apre infine nuove linee di ricerca sulla possibilità di utilizzare questa nuova classe di composti come mezzi per la cattura della CO2 e l’analisi del 14C in LSC.

Chiral properties of two-flavour QCD at zero and non-zero temperature

Lattice Quantum Chromodynamics (LQCD) is the preferred tool for obtaining non-perturbative results from QCD in the low-energy regime. It has by nowrnentered the era in which high precision calculations for a number of phenomenologically relevant observables at the physical point, with dynamical quark degrees of freedom and controlled systematics, become feasible. Despite these successes there are still quantities where control of systematic effects is insufficient. The subject of this thesis is the exploration of the potential of todays state-of-the-art simulation algorithms for non-perturbativelyrn$\mathcal{O}(a)$-improved Wilson fermions to produce reliable results in thernchiral regime and at the physical point both for zero and non-zero temperature. Important in this context is the control over the chiral extrapolation. Thisrnthesis is concerned with two particular topics, namely the computation of hadronic form factors at zero temperature, and the properties of the phaserntransition in the chiral limit of two-flavour QCD.rnrnThe electromagnetic iso-vector form factor of the pion provides a platform to study systematic effects and the chiral extrapolation for observables connected to the structure of mesons (and baryons). Mesonic form factors are computationally simpler than their baryonic counterparts but share most of the systematic effects. This thesis contains a comprehensive study of the form factor in the regime of low momentum transfer $q^2$, where the form factor is connected to the charge radius of the pion. A particular emphasis is on the region very close to $q^2=0$ which has not been explored so far, neither in experiment nor in LQCD. The results for the form factor close the gap between the smallest spacelike $q^2$-value available so far and $q^2=0$, and reach an unprecedented accuracy at full control over the main systematic effects. This enables the model-independent extraction of the pion charge radius. The results for the form factor and the charge radius are used to test chiral perturbation theory ($\chi$PT) and are thereby extrapolated to the physical point and the continuum. The final result in units of the hadronic radius $r_0$ is rn$$ \left\langle r_\pi^2 \right\rangle^{\rm phys}/r_0^2 = 1.87 \: \left(^{+12}_{-10}\right)\left(^{+\:4}_{-15}\right) \quad \textnormal{or} \quad \left\langle r_\pi^2 \right\rangle^{\rm phys} = 0.473 \: \left(^{+30}_{-26}\right)\left(^{+10}_{-38}\right)(10) \: \textnormal{fm} \;, $$rn which agrees well with the results from other measurements in LQCD and experiment. Note, that this is the first continuum extrapolated result for the charge radius from LQCD which has been extracted from measurements of the form factor in the region of small $q^2$.rnrnThe order of the phase transition in the chiral limit of two-flavour QCD and the associated transition temperature are the last unkown features of the phase diagram at zero chemical potential. The two possible scenarios are a second order transition in the $O(4)$-universality class or a first order transition. Since direct simulations in the chiral limit are not possible the transition can only be investigated by simulating at non-zero quark mass with a subsequent chiral extrapolation, guided by the universal scaling in the vicinity of the critical point. The thesis presents the setup and first results from a study on this topic. The study provides the ideal platform to test the potential and limits of todays simulation algorithms at finite temperature. The results from a first scan at a constant zero-temperature pion mass of about 290~MeV are promising, and it appears that simulations down to physical quark masses are feasible. Of particular relevance for the order of the chiral transition is the strength of the anomalous breaking of the $U_A(1)$ symmetry at the transition point. It can be studied by looking at the degeneracies of the correlation functions in scalar and pseudoscalar channels. For the temperature scan reported in this thesis the breaking is still pronounced in the transition region and the symmetry becomes effectively restored only above $1.16\:T_C$. The thesis also provides an extensive outline of research perspectives and includes a generalisation of the standard multi-histogram method to explicitly $\beta$-dependent fermion actions.

Non-thermal emission in High Frequency Peaked blazars towards the Square Kilometer Array era

In this thesis work we will explore and discuss the properties of the gamma-ray sources included in the first Fermi-LAT catalog of sources above 10 GeV (1FHL), by considering both blazars and the non negligible fraction of still unassociated gamma-ray sources (UGS, 13%). We perform a statistical analysis of a complete sample of hard gamma-ray sources, included in the 1FHL catalog, mostly composed of HSP blazars, and we present new VLBI observations of the faintest members of the sample. The new VLBI data, complemented by an extensive search of the archives for brighter sources, are essential to gather a sample as large as possible for the assessment of the significance of the correlation between radio and very high energy (E>100 GeV) emission bands. After the characterization of the statistical properties of HSP blazars and UGS, we use a complementary approach, by focusing on an intensive multi-frequency observing VLBI and gamma-ray campaign carried out for one of the most remarkable and closest HSP blazar Markarian 421.

Gravitational Lensing as a Tool on Galactic and Cosmological Scales

This work considers the reconstruction of strong gravitational lenses from their observed effects on the light distribution of background sources. After reviewing the formalism of gravitational lensing and the most common and relevant lens models, new analytical results on the elliptical power law lens are presented, including new expressions for the deflection, potential, shear and magnification, which naturally lead to a fast numerical scheme for practical calculation. The main part of the thesis investigates lens reconstruction with extended sources by means of the forward reconstruction method, in which the lenses and sources are given by parametric models. The numerical realities of the problem make it necessary to find targeted optimisations for the forward method, in order to make it feasible for general applications to modern, high resolution images. The result of these optimisations is presented in the \textsc{Lensed} algorithm. Subsequently, a number of tests for general forward reconstruction methods are created to decouple the influence of sourced from lens reconstructions, in order to objectively demonstrate the constraining power of the reconstruction. The final chapters on lens reconstruction contain two sample applications of the forward method. One is the analysis of images from a strong lensing survey. Such surveys today contain $\sim 100$ strong lenses, and much larger sample sizes are expected in the future, making it necessary to quickly and reliably analyse catalogues of lenses with a fixed model. The second application deals with the opposite situation of a single observation that is to be confronted with different lens models, where the forward method allows for natural model-building. This is demonstrated using an example reconstruction of the ``Cosmic Horseshoe''. An appendix presents an independent work on the use of weak gravitational lensing to investigate theories of modified gravity which exhibit screening in the non-linear regime of structure formation.

Non-thermal properties of two galaxy filament candidates from JVLA observations

Large-scale structures can be considered an interesting and useful "laboratory" to better investigate the Universe; in particular the filaments connecting clusters and superclusters of galaxies can be a powerful tool for this intent, since they are not virialised systems yet. The large structures in the Universe have been studied in different bands, in particular the present work takes into consideration the emission in the radio band. In the last years both compact and diffuse radio emission have been detected, revealing to be associated to single objects and clusters of galaxies respectively. The detection of these sources is important, because the radiation process is the synchrotron emission, which in turn is linked to the presence of a magnetic field: therefore studying these radio sources can help in investigating the magnetic field which permeates different portions of space. Furthermore, radio emission in optical filaments have been detected recently, opening new chances to further improve the understanding of structure formation. Filaments can be seen as the net which links clusters and superclusters. This work was made with the aim of investigating non-thermal properties in low-density regions, looking for possible filaments associated to the diffuse emission. The analysed sources are 0917+75, which is located at a redshift z = 0.125, and the double cluster system A399-A401, positioned at z = 0.071806 and z = 0.073664 respectively. Data were taken from VLA/JVLA observations, and reduced and calibrated with the package AIPS, following the standard procedure. Isocountour and polarisation maps were yielded, allowing to derive the main physical properties. Unfortunately, because of a low quality data for A399-A401, it was not possible to see any radio halo or bridge.

Caratterizzazione e progettazione di un sistema di comunicazione con ultra low power long range transceiver

Lo sviluppo di nuove tecnologie sempre più innovative e all’avanguardia ha portato ad un processo di costante rivisitazione e miglioramento di sistemi tecnologici già esistenti. L’esempio di Internet risulta, a questo proposito, interessante da analizzare: strumento quotidiano ormai diventato alla portata di tutti, il suo processo di rivisitazione ha portato allo sviluppo dell’Internet Of Things (IoT), neologismo utilizzato per descrivere l'estensione di Internet a tutto ciò che può essere trasformato in un sistema elettronico, controllato attraverso la rete mondiale che oggi può essere facilmente fruibile grazie all’utilizzo di Smartphone sempre più performanti. Lo scopo di questa grande trasformazione è quello di creare una rete ad-hoc (non necessariamente con un accesso diretto alla rete internet tramite protocolli wired o wireless standard) al fine di stabilire un maggior controllo ed una maggiore sicurezza, alla quale è possibile interfacciare oggetti dotati di opportuni sensori di diverso tipo, in maniera tale da condividere dati e ricevere comandi da un operatore esterno. Un possibile scenario applicativo della tecnologia IoT, è il campo dell'efficienza energetica e degli Smart Meter. La possibilità di modificare i vecchi contatori del gas e dell’acqua, tutt’oggi funzionanti grazie ad una tecnologia che possiamo definire obsoleta, trasformandoli in opportuni sistemi di metring che hanno la capacità di trasmettere alla centrale le letture o i dati del cliente, di eseguire operazioni di chiusura e di apertura del servizio, nonché operazioni sulla valutazione dei consumi, permetterebbe al cliente di avere sotto controllo i consumi giornalieri. Per costruire il sistema di comunicazione si è utilizzato il modem Semtech SX1276, che oltre ad essere low-power, possiede due caratteristiche rivoluzionarie e all’avanguardia: utilizza una modulazione del segnale da trasmettere innovativa e una grande capacità di rilevare segnali immersi in forti fonti di rumore ; la possibilità di utilizzare due frequenze di trasmissione diverse, 169 MHz e 868MHz.

Indagine sperimentale sulla risposta dinamica di provini piatti in lega d'alluminio sottoposti a diverse tipologie di eccitazione vibratoria non-gaussiana

Negli ultimi anni va sempre più affermandosi l’idea che nei test a fatica utilizzati in ambito industriale per testare la resistenza di numerosi prodotti, riprodurre profili vibratori con distribuzioni gaussiane non sia sufficientemente realistico. Nell’indagine sperimentale riportata in questo trattato vengono confrontati gli effetti generati da sollecitazioni leptocurtiche ottenute da misurazioni reali, con profili vibratori gaussiani a parità di RMS e forma della PSD (Power Spectral Density) verificando la validità della “Papoulis rule”. A partire da questi profili vibratori si è effettuata una progettazione ad hoc dalla quale sono stati ricavati dei provini piatti in lega di alluminio a cui è collegata una massa ausiliaria. Quest’ultimi montati a sbalzo su uno shaker elettrodinamico, sono caratterizzati da una variazione di sezione che localizza la sezione critica in prossimità dell’incastro. I provini sono stati inoltre caratterizzati attraverso prove a trazione e test accelerati a fatica, ricavandone la caratteristica a trazione del materiale ed il diagramma di Wohler. In seguito alla descrizione di tali prove viene riportata un’analisi dei provini sollecitati da due profili vibratori, uno gaussiano e uno ad elevato valore di kurtosis, monitorando tramite l’impiego di accelerometri i valori dell’eccitazione e la risposta. Vengono inoltre verificati i valori delle deformazioni dovute alle sollecitazioni imposte collocando due estensimetri in corrispondenza della sezione critica di due provini (uno per ogni tipologia di input).

Das deutsche Kriegsgefangenenwesen 1939 - 1945

Zusammenfassung: Die vorliegende Untersuchung zum deutschen Kriegsgefangenenwesen (KGW) im Zweiten Weltkrieg schließt eine wichtige Lücke innerhalb der geschichtswissenschaftlichen Forschungen zum Themenkreis der Kriegsgefangenschaft in deutschem Gewahrsam. Bisherige Studien (bis einschließlich 1997) behandeln vor allem sozial- und kulturgeschichtliche Aspekte der Kriegsgefangenen (Kgf.), der Lagergesellschaft und dem Alltag von Soldaten in Kriegsgefangenschaft. Der Verfasser indes legt mit seiner Magisterarbeit erstmals eine Organisations- und Strukturgeschichte des deutschen Kriegsgefangenenwesens von 1939 bis 1945 vor, welche fundamentale Grundlagen der deutschen militärischen Lagerorganisation und Verwaltung dokumentiert. So wird die Entwicklung von den Vorkriegsplanungen bis zum Kriegsende anhand der zentralen Dienststellen herausgearbeitet und im Kontext des Genfer Kriegsgefangenenabkommens von 1929 und völkerrechtlicher Implikationen gewichtet. Hiermit untrennbar verbundene Einflußnahmen nichtmilitärischer Stellen in die Entscheidungsgewalt der Streitkräfte im Heimatkriegsgebiet und in den Wehrmachtbefehlshaberbereichen werden nicht zuletzt auch anhand mehrerer Organigramme veranschaulicht. Zudem dokumentiert und analysiert die Untersuchung die im Kriegsverlauf stetig verschärften Maßnahmen zur Fluchtprävention und der konzertierten Fahndung nach geflohenen Kriegsgefangenen: Die Machterosion des Oberkommandos der Wehrmacht (OKW) zugunsten des Reichsführers-SS, des Reichssicherheitshauptamts und nicht zuletzt der Parteikanzlei der NSDAP wird so augenfällig. Trotz eminenter Schriftgutverluste kann der Verfasser vor allem anhand einer nahezu vollständig erhaltenen Schlüsselquelle die Stellenbesetzung und Organisationsstruktur der mit Kriegsgefangenenfragen befassten Stellen im OKW rekonstruieren. Die Auswertung dieser Sammelmitteilungen / Befehlssammlung für das Kriegsgefangenenwesen sowie an anderer Stelle überlieferter Organisationsbefehle ermöglicht wichtige Änderungen am derzeitigen Forschungsstand. Darüber hinaus beschäftigt sich die vorliegende Untersuchung mit dem Arbeitseinsatz Kriegsgefangener in der deutschen Wirtschaft als in der zweiten Kriegshälfte zentralem Element der Kriegsgefangenschaft. Außerdem wird beleuchtet, welche politischen, (rassen)ideologischen oder reziprok konnotierten Faktoren den Stellenwert gefangener Soldaten unterschiedlicher Nationalität innerhalb der Gefangenenhierarchie im deutschen Kriegsgefangenenwesen bestimmten. Inhalt: 1. Einführung; 2. Die Entwicklung des Kriegsvölkerrechts und das Genfer Kriegsgefangenenabkommen von 1929; 3. Einleitende Bemerkungen zum deutschen Kriegsgefangenenwesen: Quellenlage, Grundlagen; 4. Organisationsstruktur und Aufgaben des KGW: Zuständigkeiten für Kgf. in OKW und OKH, Abt. Wehrmachtverluste und Kriegsgefangene, der General z.b.V. für das KGW 1939 bis Ende 1941, Allgemeine und Organisationsabteilung seit Januar 1942, Generalinspekteur und Inspekteur des KGW von Juli 1943 bis Oktober 1944, das Kriegsgefangenenwesen unter Himmler seit Oktober 1944; 5. Die Kriegsgefangenenlager: Lagertypen, Anzahl und Verwendung, die Gesamtzahl Kgf. und Belegstärken ausgewählter Lager; 6. Richtlinien für KGL: Die Sammelmitteilungen / Befehlssammlung für das KGW, Lagerorganisation und Behandlung Kriegsgefangener; 7. Die Post der Kriegsgefangenen: Tätigkeit von Auslandsbriefprüfstelle, Abwehr III Referat Kgf. und Abwehrstellen der Wehrkreise, Vorgaben für Postüberwachung und Stimmungsberichte der Asten, Befehle zur Kgf-Post und Kooperation mit Hilfsorganisationen und Schutzmächten; 8. Fluchtprävention: Bestimmungen und Maßnahmen zur Fluchtvereitelung, der Fluchterlass vom 22.09.1942, der Sonderfahndungsplan der Sicherheitspolizei und des SD vom 28.09.1942, Erlass zur Kriegsfahndung vom 5.12.1942, der Fluchterlaß vom 02.07.1943, der Erlaß zur Mitarbeit NSDAP bei Groß- und Kriegsfahndungen vom 10.07.1943, Schulung zur Fluchtprävention auf Wehrkreisebene 1944, Preisausschreiben "Wie verhindere ich Fluchten?" vom 09.04.1945, Anwerbung von V-Leuten durch die Abwehr; 9. Arbeitseinsatz Kriegsgefangener in der deutschen Wirtschaft und beteiligte Stellen; 10. Der Status Kriegsgefangener unterschiedlicher Nationalitäten im Vergleich; 11. Schluss

Valutazione del contributo emissivo in condizioni non-stazionarie alle emissioni totali di una stufa a pellet domestica

The aim of this work is to evaluate the emissions of the main pollutants of a pellet stove, by trying to simulate the real use in domestic operations. All the operating phases of this system were considered: ignition, partial load, increase in power, and nominal load. In each phase, quantity and type of some pollutants in emissions were determined: the main pollutant gases (CO, NOx, SO2, H2S and volatile organic compounds (VOCs)), total dust (PM) and its content of polycyclic aromatic hydrocarbons (PAHs), regulated heavy metals (Ni, Cd, As and Pb), main soluble ions and Total Carbon (TC). Results show that emission factors of TSP, CO, and of the main determined pollutants (TC, Cd and PAHs) are higher during ignition phase. In particular, this phase prevalently contributes to PAHs emissions. During increase in power phase, gas and particulate emissions do not appreciably differ from nominal load ones; nevertheless, PAH emission factors are higher than steady state ones, but lower than ignition phase. Moreover, during not-steady state phases, PAH mixture is more toxic than during steady state phases. In conclusion, this study allowed to go deeper in pellet stove environmental impact, by pointing out how the different operating conditions can modify the emissions. These are different from certificated data, which are based exclusively on measurements in steady state conditions.

Design of an indirectly fired gas turbine integrated with an organic rankine cycle unit for combined heat and power production

In the last years, the European countries have paid increasing attention to renewable sources and greenhouse emissions. The Council of the European Union and the European Parliament have established ambitious targets for the next years. In this scenario, biomass plays a prominent role since its life cycle produces a zero net carbon dioxide emission. Additionally, biomass can ensure plant operation continuity thanks to its availability and storage ability. Several conventional systems running on biomass are available at the moment. Most of them are performant either in the large-scale or in the small power range. The absence of an efficient system on the small-middle scale inspired this thesis project. The object is an innovative plant based on a wet indirectly fired gas turbine (WIFGT) integrated with an organic Rankine cycle (ORC) unit for combined heat and power production. The WIFGT is a performant system in the small-middle power range; the ORC cycle is capable of giving value to low-temperature heat sources. Their integration is investigated in this thesis with the aim of carrying out a preliminary design of the components. The targeted plant output is around 200 kW in order not to need a wide cultivation area and to avoid biomass shipping. Existing in-house simulation tools are used: They are adapted to this purpose. Firstly the WIFGT + ORC model is built; Zero-dimensional models of heat exchangers, compressor, turbines, furnace, dryer and pump are used. Different fluids are selected but toluene and benzene turn out to be the most suitable. In the indirectly fired gas turbine a pressure ratio around 4 leads to the highest efficiency. From the thermodynamic analysis the system shows an electric efficiency of 38%, outdoing other conventional plants in the same power range. The combined plant is designed to recover thermal energy: Water is used as coolant in the condenser. It is heated from 60°C up to 90°C, ensuring the possibility of space heating. Mono-dimensional models are used to design the heat exchange equipment. Different types of heat exchangers are chosen depending on the working temperature. A finned-plate heat exchanger is selected for the WIFGT heat transfer equipment due to the high temperature, oxidizing and corrosive environment. A once-through boiler with finned tubes is chosen to vaporize the organic fluid in the ORC. A plate heat exchanger is chosen for the condenser and recuperator. A quasi-monodimensional model for single-stage axial turbine is implemented to design both the WIFGT and the ORC turbine. The system simulation after the components design shows an electric efficiency around 34% with a decrease by 10% compared to the zero-dimensional analysis. The work exhibits the system potentiality compared to the existing plants from both technical and economic point of view.