Properties of DLC films deposited by an oxyacetylene flame

Diamond-like carbon (DLC) films were obtained by spinning a tungsten carbide substrate at a high speed using an oxyacetylene flame. The films deposited at a typical experimental condition of substrate temperature of 810 degrees C, rotation of 600 rpm and 3 h deposition time, exhibited an uniform, very smooth, hard and glassy surface covering the entire exposed face of the substrate. These films were identified as DLC by their characteristic broad Raman spectra centered at 1554 cm(-1) and micro-Vicker's hardness > 3400 kg mm(-2). For substrate temperatures < 800 degrees C the film started losing the uniform glassy surface and the hardness deteriorated. For temperatures > 950 degrees C the film was still hard and shiny, but black in color. DLC films were also obtained in a wide range of speeds of rotation (300-750 rpm), as long as the temperature remained close to 850 degrees C. (C) 1999 Elsevier B.V. S.A. All rights reserved.

Rapid Prototyping applied to surgical planning for correcting craniofacial malformations in wild animals. A case study of a brazilian fox

Veterinary surgery for treatment of wild animals is becoming an increasingly demanding task because it involves animals of different anatomy, many of them are already stressed and treatment must be performed to the highest standard in the minimum period of time. Craniofacial alterations may occur for three main reasons: genetic, functional or a combination of both. It is possible to modify the functional cause using intraoral devices like inclined plane. The treatment planning can be made based on virtual 3D models and rapid prototyping. An approximately 9 months old, 3.7 kg male Brazilian fox (Lycalopex vetulus) was referred to the Veterinary Hospital. Physical examination showed malocclusion with a deviation of the mandible to the right side. The virtual 3D model of the head was generated based on CT image data. The 3D models and rapid prototyping opened up new possibilities for the surgical planning and treatment of wild animals.

Relevance of Budgerigars (Melopsittacus undulatus) in Experimental Epidemiology of Newcastle Disease.

This study was carried out to clarify the real role that was played by the budgerigars (Melopsittacus undulatus) in the epidemiological plan, under the perspective of its being an infection source of the Newcastle Disease Virus (NDV). For this, the study used Specific-Pathogen-Free chicks (SPF) that were housed with budgerigars that were inoculated with a pathogenic strain (velogenic viscerotropic) of NDV (EID5o =10815/0.1 mL) pathogenic to chickens, by the ocular-nasal via. Each group was composed by 10 SPF chicks and 5 budgerigars. After 5 days of the inoculation of the budgerigars with NDV, SPF chicks were put together with each group of budgerigars, so that there was a direct contact between both species. Cloaca) swabs and blood samples were collected in both species (budgerigars and SPF chicks) after 13 and 19 days post-challenge, respectively, for genome viral excretion by Reverse Transcription Polymerase Chain Reaction (RTPCR) and antibody's search by the inhibition of hemmaglutination test (HI). Budgerigars did not demonstrate any clinical signs of Newcastle Disease (ND). They were refractory to the clinical disease with the NDV. However, antibody titres from inhibition of Hemagglutination (HI) test were detected 9 and 21 days after challenge. Therefore, it was demonstrated the state of carrier of NDV in this species. In SPF chicks allocated with infected budgerigars, NDV genome was detected 13 and 19 days after challenge. Thus, the transmission of the pathogenic virus from the budgerigars to SPF chicks that were housed together was evident until 19 days of the experimental infection with this pathogen. This reveals the importance of the budgerigars from the epidemiological point of view as a potential source of infection of the NDV to commercial chickens that could be raised near this species.

Evaluation of Experimental Vaccination Against Newcastle Disease in Lovebirds (Agapornis roseicollis): Investigation of the State of Virus Carrier.

The aim of this study was to evaluate the importance of vaccination against Newcastle Disease (ND) in lovebirds (Agapornis roseicollis) and to investigate the state of carrier of the virus (NDV) in this species. There were used 48 lovebirds, distributed at random into 4 experimental groups: GI (Ulster 2C strain), Gil (B1 strain), Gill (LaSota strain) and GIV (non-vaccinated group). At 12 months of age, all groups were challenged with a pathogenic virus (NDV) suspension (ElD50 = 1081510.1 mL) and a group of Specific-Pathogen-Free (SPF) chicks were used as control of the virus. Cloaca) swabs from each bird were collected after 9, 14 and 21 days post-challenge for detection of genome viral excretion by Reverse Transcription Polymerase Chain Reaction RT-PCR. Lovebirds of GI, Gil and Gill did not demonstrate any signs of ND. They were refractory to the clinical disease. In lovebirds from the control group, NDV genome was detected 9 and 21 days after challenge. Therefore it was demonstrated the state of carrier of NDV by lovebirds. In birds from the vaccinated groups, genome viral excretion was not detected by RT-PCR. It was also demonstrated the importance of the vaccination in the suppression of the state of virus carrier of ND in lovebirds.

Prosthetic Platforms in Implant Dentistry

The use of implant-supported prosthesis to replace missing teeth became a predictable treatment. Although high success rate has been reported, implant treatment is suitable to complications, failures, and limitations such as peri-implant bone loss after implant loading. Stress evaluation on the bone-abutment-implant interface has been carried out to develop new designs of prosthetic platform and to understand the stress distribution in this interface. Several types of prosthetic platforms are available such as external and internal hexagon, Morse cone connection, and the concept of platform switching. Therefore, this study aimed to critically describe the different options of prosthetic platforms in implant dentistry, by discussing their biomechanical concepts, clinical use, and advantages and disadvantages. It was observed that all types of prosthetic platforms provided high success rate of the implant treatment by following a strict criteria of indication and limitation. In conclusion, a reverse planning of implant treatment is strongly indicated to reduce implant overload, and the use of advanced surgical-prosthetic techniques is required to obtain a long-term success of oral rehabilitations.

Effect of occlusal splint thickness on electrical masticatory muscle activity during rest and clenching

The extent of separation between the maxillary and mandibular teeth in the fabrication of interocclusal splints designed to achieve efficiency and muscle relaxation is controversial and undefined in the literature. Based on this premise, the aim of this study was to evaluate the effect of interocclusal splint thicknesses of 3 and 6 millimeters on the electrical activity of the anterior temporal and masseter muscles during rest and dental clenching. Twenty asymptomatic individuals (10 males and 10 females) were selected using the Research Diagnostic Criteria (RDC). Electromyography (EMG) was performed both with and without the 3- and 6-mm splints using the Bio EMG software package, which recorded values given in microvolts (mu V). The results, which were assessed using analysis of variance (ANOVA) to a 5% significance level (p < 0.05), showed increased electrical activity of the masticatory muscles during dental clenching compared with at rest, with greater activity in the masseter muscle. The electrical activity did not differ according to the thickness of the splints or between males and females. We can conclude that both splint thicknesses are effective in treating muscle hyperactivity given their similar clinical behavior for asymptomatic individuals.

Prototyping for Surgical and Prosthetic Treatment

Techniques of rapid prototyping were introduced in the 1980s in the field of engineering for the fabrication of a solid model based on a computed file. After its introduction in the biomedical field, several applications were raised for the fabrication of models to ease surgical planning and simulation in implantology, neurosurgery, and orthopedics, as well as for the fabrication of maxillofacial prostheses. Hence, the literature has described the evolution of rapid prototyping technique in health care, which allowed easier technique, improved surgical results, and fabrication of maxillofacial prostheses. Accordingly, a literature review on MEDLINE ( PubMed) database was conducted using the keywords rapid prototyping, surgical planning, and maxillofacial prostheses and based on articles published from 1981 to 2010. After reading the titles and abstracts of the articles, 50 studies were selected owing to their correlations with the aim of the current study. Several studies show that the prototypes have been used in different dental-medical areas such as maxillofacial and craniofacial surgery; implantology; neurosurgery; orthopedics; scaffolds of ceramic, polymeric, and metallic materials; and fabrication of personalized maxillofacial prostheses. Therefore, prototyping has been an indispensable tool in several studies and helpful for surgical planning and fabrication of prostheses and implants.

Reconstruction of Skull Defects: Currently Available Materials

The restoration and recovery of a compromised skull continues to be a challenge to craniofacial surgeons and neurosurgeons. Different operative techniques and implant materials are being used to reconstruct the rigid framework of the skull. However, no currently available materials satisfy all of these criteria. According to this premise, the aim of this study was to report on the currently available materials for the reconstruction of the cranial vault and to describe their main characteristics, advantages, and disadvantages. Although the use of the materials discussed in this study is clearly positive for the reconstruction of skull defects and cranioplasties, there is a need for more complex studies and research into developing these materials to achieve all the ideal prerequisites stipulated by the scientific community and to evaluate their properties and aesthetic and functional results in the long term.

The midgut of Cephalotes ants (Formicidae: Myrmicinae): Ultrastructure of the epithelium and symbiotic bacteria

The ultrastructural analysis of the midgut of Cephalotes atratus. C. clypeatus, and C. pusillus reveled that the midgut epithelium lays on a basal lamina and is composed basically of three cell types: digestive cells, regenerative cells, and goblet cells. In these ants, the rough endoplasmic reticulum, in addition to producing digestive enzymes, is involved in the formation of concretions and ion storage in specialized vacuoles present in the midgut. These concretions are spherocrystals and may contribute to stabilize the pH and to maintain symbiotic bacteria found between microvilli. The ultrastructure analysis of these bacteria revealed the presence of a double envelope typical of gram-negative bacteria. For the three species examined, the ultrastructure similarities are conspicuous, suggesting that this may be the pattern for the genus Cephalotes. Details of the relationship between bacteria and microvilli were examined. (C) 2010 Elsevier Ltd. All rights reserved.

Symbiotic bacteria and the structural specializations in the ileum of Cephalotes ants

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Histology and Histochemistry of the Stomach Epithelium of Pachycondyla (= Neoponera) villosa (Formicidae: Ponerinae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Post-Embryonic Development of Larvae of the Weaver Ant Camponotus textor (Hymenoptera: Formicidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ileum of the Cephalotes ants: A specialized structure to harbor symbionts microorganisms

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ultramorphology of mandibles from Dolichoderus (=Monacis) bispinosus males.

Mandibles of ants are usual for many activities like cut and transport of food, transport of larvae and eggs, colony defense and to dig the rolls in the soil or/and wood for next building, among other activities. In male the principal function of the mandible is to act itself to female body during the mating by other hand the female use its mandibles to cut out the end of the male body after mating. The mandible movement are be possible because the different muscle presents in its articulation - the abductor and to adductor ones. The S.E.M. makes possible to study it in details to and showed the presence of skeletal muscle. This suggests its function to be instrument to use during the mating.

Proventriculus of Cephalotes ants: A structural and comparative analysis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)