A study of the aerodynamic characteristics of captor hoods in local exhaust ventilation systems

The research objectives were:- 1.To review the literature to establish the factors which have traditionally been regarded as most crucial to the design of effectlve exhaust ventilation systems. 2. To design, construct, install and calibrate a wind tunnel. 3. To develop procedures for air velocity measurement followed by a comprehensive programme of aerodvnamic data collection and data analysis for a variety of conditions. The major research findings were:- a) The literature in the subject is inadequate. There is a particular need for a much greater understanding of the aerodynamics of the suction flow field. b) The discrepancies between the experimentally observed centre-line velocities and those predicted by conventional formulae are unacceptably large. c) There was little agreement between theoretically calculated and observed velocities in the suction zone of captor hoods. d) Improved empirical formulae for the prediction of centre-line velocity applicable to the classical geometrically shaped suction openings and the flanged condition could be (and were) derived. Further analysis of data revealed that: - i) Point velocity is directly proportional to the suction. flow rate and the ratio of the point velocity to the average face velocity is constant. ii) Both shape, and size of the suction opening are significant factors as the coordinates of their points govern the extent of the effect of the suction flow field. iii) The hypothetical ellipsoidal potential function and hyperbolic streamlines were found experimentally to be correct. iv) The effect of guide plates depends on the size, shape and the angle of fitting. The effect was to very approximately double the suction velocity but the exact effect is difficult to predict. v) The axially symmetric openings produce practically symmetric flow fields. Similarity of connection pieces between the suction opening and the main duct in each case is essential in order to induce a similar suction flow field. Additionally a pilot study was made in which an artificial extraneous air flow was created, measured and its interaction with the suction flow field measured and represented graphically.

An Algorithm to Mine Normalized Weighted Sequential Patterns Using a Prefix-projected Database

Sequential pattern mining is an important subject in data mining with broad applications in many different areas. However, previous sequential mining algorithms mostly aimed to calculate the number of occurrences (the support) without regard to the degree of importance of different data items. In this paper, we propose to explore the search space of subsequences with normalized weights. We are not only interested in the number of occurrences of the sequences (supports of sequences), but also concerned about importance of sequences (weights). When generating subsequence candidates we use both the support and the weight of the candidates while maintaining the downward closure property of these patterns which allows to accelerate the process of candidate generation.

Rib-cage-movement measurements as a potential new trigger signal in non-invasive mechanical ventilation

Non-invasive ventilation performed through an oronasal mask is a standard in clinical and homecare mechanical ventilation. Besides all its advantages, inevitable leaks through the mask cause errors in the feedback information provided by the airflow sensor and, hence, patient-ventilator asynchrony with multiple negative consequences. Here we investigate a new way to provide a trigger to the ventilator. The method is based on the measurement of rib cage movement at the onset of inspiration and during breathing by fibre-optic sensors. In a series of simultaneous measurements by a long-period fibre grating sensor and pneumotachograph we provide the statistical evidence of the 200 ms lag of the pneumo with respect the fibre-optic signal. The lag is registered consistently across three independent delay metrics. Further, we discuss exceptions from this trend and identify the needed improvements to the proposed fibre-sensing scheme.

Assessing the legacy of the pine point mine: post-industrial land cover and land use

While mining is a major component of the northern Canadian economy, including the contemporary mixed economy of Aboriginal communities, it often leaves legacies of environmental and economic transformation that persist after closure. The legacies of historical mines in northern Canada challenge industry claims of sustainability. This thesis addresses how industrial mineral development and closure continue to affect local environments and economies after abandonment. The abandoned Pine Point mine in the Northwest Territories provides a case study for explaining the ongoing relationships among land cover, land use, and the post-industrial landscape. Drawing from landscape ecology and micropolitical ecology, I adopt an interdisciplinary approach to examine environmental and socioeconomic changes in the wake of industrial development and closure at Pine Point. The results show that passive reclamation is not sufficient for restoring ecological function in a subarctic environment. Land use, however, persists as land users adapt to the post-industrial landscape despite grave concern about its environmental condition. If mining is to be considered sustainable, decommissioning and reclamation must explicitly account for long-term environmental transformation as well as ongoing post-industrial land use, particularly in Aboriginal contexts.

Older woman takes part in Mine-Marathon in Central Park

General note: Title and date provided by Bettye Lane.

Rôle du diaphragme au cours de l'expiration chez l'enfant sous ventilation mécanique

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Rôle du diaphragme au cours de l'expiration chez l'enfant sous ventilation mécanique

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Description of manganese deposits from the Papago mine, Saipan, Mariana Islands

Saipan, situated about 15° N. and 146° E., is one of the larger and more southerly of the Mariana Islands. The 15 small islands of this chain are strung along an eastwardly convex ridge for more than 400 miles north to south, midway between Honshu and New Guinea and about 1,200 miles east of the Philippines. Paralleling this ridge 60 to 100 miles further east is a deep submarine trench, beyond which lies the Pacific Basin proper. To the west is the Philippine Sea, generally deeper than 2,000 fathoms. The trench coincides with a zone of negative gravity anomalies, earthquake foci occur at increasing depths westward from it, and silica- and alumina-rich volcanic rocks characterize the emergent island chain itself. The contrast between these features and those of the Pacific Basin proper to the east is held to favor the conclusion that the Mariana island arc and trench define the structural and petrographic front of Asia.

(Page 290) Composition of a manganese deposit sample from the Todoroki Mine, Japan

The Todoroki Mine is situated about 25 kilometers to the south-east of Ginzan railway station in Siribesi Province, Hokkaido. The author analysed an interesting specimen of black manganese-ore which had a fractured surface which looked like that of a broken piece of wood. This new manganese mineral was studied in its form, physical properties and chemical composition. The author later named this mineral form as "todorokite".

Description of manganese deposits from the Todoroki mine, Hokkaido area, Japan

Manganese deposits are abundant in various places in the Oshima Peninsula southwest of Hokkaido. This is particular the case of Todoroki Mine situated about 25 kilometers to the south-east of the Ginzan railway station in Siribesi Province. It consists of manganese beds intermixed with a tertiary volcanic tuff complex overlaying granite.

Understanding arsenic mobility and speciation in lake sediments impacted by ore roasting near Giant mine, NWT

The roasting of gold-bearing arsenopyrite at Giant mine (Northwest Territories) between 1949 and 1999 released approximately 20,000 tonnes of toxic arsenic-bearing aerosols in the local aerial environment. Detailed examination of lake sediments, sediment porewaters, surface waters and lake hydrology sampled from three lakes of differing limnological characteristics was conducted in summer and winter conditions. Samples were analyzed for solid and dissolved elemental concentrations, speciation and mineralogy. The three lakes are located less than 5km from the mine roaster, and downwind, based on predominant wind direction. The objective of the study was to assess the controls on the mobility and fate of arsenic in these roaster-impacted subarctic lacustrine environments. Results show that the occurrence of arsenic trioxide in lake sediments coincides with the regional onset of industrial activities. The bulk of arsenic in sediments is contained in the form of secondary sulphide precipitates, with iron oxides hosting a minimal amount of arsenic near the surface-water interface. The presence of geogenic arsenic is likely contained as dilute impurities in common rock-forming minerals, and is not believed to be a significant source of arsenic to sediments, porewaters or lake waters. Furthermore, the well correlated depth-profiles of arsenic, antimony and gold in sediments may help reveal roaster impact. The soluble arsenic trioxide particles contained in sediments act as the primary source of arsenic into porewaters. Dissolved arsenic in reducing porewaters both precipitate as secondary sulphides in situ, and diffuse upwards into the overlying lake waters. Arsenic diffusion out of porewaters, combined with watercourse-driven residence time, are estimated to be the predominant mechanisms controlling arsenic concentrations in overlying lake waters. The sequestration of arsenic from porewaters as sulphide precipitates, in the study lakes, is not an effective process in keeping lake-water arsenic concentrations below guidelines for the protection of the freshwater environment and drinking water. Seasonal impacts on lake geochemistry derive from ice covering lake waters, cutting them off from of atmospheric oxygen, along with the exclusion of solutes from the ice. Such effects are limited in deep lakes but are can be an important factor controlling arsenic precipitation and mobility in ponds.

Assessing hydrothermal liquefaction for the production of bio-oil and enhanced metal recovery from microalgae cultivated on acid mine drainage

The hydrothermal liquefaction(HTL) of algal biomass is a promising route to viable second generation biofuels. In this investigation HTL was assessed for the valorisation of algae used in the remediation of acid mine drainage (AMD). Initially the HTL process was evaluated using Arthrospira platensis (Spirulina) with additional metal sulphates to simulate metal remediation. Optimised conditions were then used to process a natural algal community (predominantly Chlamydomonas sp.) cultivated under two scenarios: high uptake and low uptake of metals from AMD. High metal concentrations appear to catalyse the conversion to bio-oil, and do not significantly affect the heteroatom content or higher heating value of the bio-oil produced. The associated metals were found to partition almost exclusively into the solid residue, favourable for potential metal recovery. High metal loadings also caused partitioning of phosphates from the aqueous phase to the solid phase, potentially compromising attempts to recycle process water as a growth supplement. HTL was therefore found to be a suitable method of processing algae used in AMD remediation, producing a crude oil suitable for upgrading into hydrocarbon fuels, an aqueous and gas stream suitable for supplementing the algal growth and the partitioning of most contaminant metals to the solid residue where they would be readily amenable for recovery and/or disposal.

Assessing hydrothermal liquefaction for the production of bio-oil and enhanced metal recovery from microalgae cultivated on acid mine drainage

The hydrothermal liquefaction(HTL) of algal biomass is a promising route to viable second generation biofuels. In this investigation HTL was assessed for the valorisation of algae used in the remediation of acid mine drainage (AMD). Initially the HTL process was evaluated using Arthrospira platensis (Spirulina) with additional metal sulphates to simulate metal remediation. Optimised conditions were then used to process a natural algal community (predominantly Chlamydomonas sp.) cultivated under two scenarios: high uptake and low uptake of metals from AMD. High metal concentrations appear to catalyse the conversion to bio-oil, and do not significantly affect the heteroatom content or higher heating value of the bio-oil produced. The associated metals were found to partition almost exclusively into the solid residue, favourable for potential metal recovery. High metal loadings also caused partitioning of phosphates from the aqueous phase to the solid phase, potentially compromising attempts to recycle process water as a growth supplement. HTL was therefore found to be a suitable method of processing algae used in AMD remediation, producing a crude oil suitable for upgrading into hydrocarbon fuels, an aqueous and gas stream suitable for supplementing the algal growth and the partitioning of most contaminant metals to the solid residue where they would be readily amenable for recovery and/or disposal.

Draft Genome Sequence of Staphylococcus succinus Strain CSM-77, a Moderately Halophilic Bacterium Isolated from a Triassic Salt Mine.

Here, we report the draft genome sequence of Staphylococcus succinus strain CSM-77. This moderately halophilic bacterium was isolated from the surface of a halite sample obtained from a Triassic salt mine.