Core scans and lithologic analysis of Subglacial Lake Whillans sediment cores

The hydrologic system beneath the Antarctic Ice Sheet is thought to influence both the dynamics and distribution of fast flowing ice streams, which discharge most of the ice lost by the ice sheet. Despite considerable interest in understanding this subglacial network and its affect on ice flow, in situ observations from the ice sheet bed are exceedingly rare. Here we describe the first sediment cores recovered from an active subglacial lake. The lake, known as Subglacial Lake Whillans, is part of a broader, dynamic hydrologic network beneath the Whillans Ice Stream in West Antarctica. Even though "floods" pass through the lake, the lake floor shows no evidence of erosion or deposition by flowing water. By inference, these floods must have insufficient energy to erode or transport significant volumes of sediment coarser than silt. Consequently, water flow beneath the region is probably incapable of incising continuous channels into the bed and instead follows preexisting subglacial topography and surface slope. Sediment on the lake floor consists of till deposited during intermittent grounding of the ice stream following flood events. The fabrics within the till are weaker than those thought to develop in thick deforming beds suggesting subglacial sediment fluxes across the ice plain are currently low and unlikely to have a large stabilizing effect on the ice stream's grounding zone.

Magnetic and petrographic properties of ODP Site 120-747 (Table 1)

Carbonate sediments from the Kerguelen Plateau (ODP Leg 120) of Eocene to Pliocene age were investigated with rock magnetic, petrographic and geochemical methods to determine the carriers of remanent magnetization. Magnetic methods showed that the major magnetic minerals were titanomagnetites slightly larger than single domain particles. Submicrometre to micrometre-size grains of titanomagnetite were identified as inclusions in volcanic glass particles or as crystals in lithic clasts. Volcanic fallout ash particles formed the major fraction of the magnetic extract from each sediment sample. Three groups of volcanic ashes were identified: trachytic ashes, basaltic ashes with sideromelane and tachylite shards, and palagonitic ashes. These three groups could be equally well defined based on their magnetic hysteresis properties and alternating field demagnetization curves. The highest coercivities of all samples were found for the tachylite, due to the submicrometre-size titanomagnetite inclusions in the matrix. Trachytic ashes had intermediate magnetic properties between the single-domain-type tachylites and the palagonitic (altered) basaltic ashes with low coercivities. Samples which contained mixtures of these different volcanic ashes could be distinguished from the three types of ashes based on their magnetic characteristics. There was neither evidence of biogenic magnetofossils in the transmission electron micrographs nor did we find magnetic particles derived from continental Antarctica. The presence of dispersed volcanic fallout ashes between visible ash layers suggests continuous explosive volcanic activity on the Kerguelen Plateau in the South Indian Ocean since the early Eocene. The continuous fallout of volcanic ash from explosive volcanism on the Kerguelen Archipelago is the source of the magnetic particles and thus responsible for the magnetostratigraphy of the nannofossil oozes drilled during Leg 120.

Table 1. Radiocarbon ages of sediment core LDB01-I

Magnetic susceptibility (MS) was measured with high resolution (5 mm) on a 9 m long, 14C dated core from Lake Le Bourget (Savoie, France), spanning the last 7200 years. The strong correlation (R=0.85) of the MS with the silicate-borne suite of elements (Si, Al, Fe, Mg, K) and anti-correlation with the carbonate content (R =-0.87) allows it to be used as a proxy for the fluctuations of the abundance of riverborne clastic fraction versus authigenic carbonates in sediment. As the Rhône is the only river bringing a significant amount of silicate minerals to the coring site, the MS downstream is interpreted as a proxy of the Rhône suspended load discharge in Lake Le Bourget. This is confirmed over the last 3000 years by the good match with the evolution of hydrological activity of the Rhône as it is known through geomorphological studies of well-dated archaeological sites. Over the last 7200 years, the record is consistent with the regional record of lake water-level fluctuations. While the intensity of the MS signal might be widely affected by the human impact on soil stability, the timing of the period of enhanced hydrological activity appears to be mostly climate-related, and should thus constitute a first step toward a high-resolution (< 8 yr) continuous history of hydrological conditions in the NW Alps.

Stable oxygen isotope data and geophysical measurements from Red Sea of core M174/Kl11

To settle debate on the timing of sea level fluctuations during marine isotope stage (MIS) 3, we present records of d18O ruber (sea level proxy) and magnetic susceptibility from the same samples within the single sediment archive (i.e., "coregistered") of central Red Sea core GeoTü-KL11. Core-scanning X-ray fluorescence and environmental magnetic data establish the suitability of magnetic susceptibility as a proxy for eolian dust content in Red Sea sediments. The eolian dust data record similar variability as Greenland d18O ice during early to middle MIS 3, in agreement with previous observations that regional Arabian Sea climate fluctuated with a timing similar to that of Greenland climate variations. In contrast, the sea level record fluctuates with a timing similar to that of Antarctic-style climate variations. The coregistered nature of the two records in core KL11 unambiguously reveals a distinct offset in the phase relationship between sea level and eolian dust fluctuations. The results confirm that sea level rises, indicated by shifts in Red Sea d18O ruber to lighter values, occurred during cold episodes in Greenland during early to middle MIS 3. This indicates that the amplitudes of the reconstructed MIS 3 sea level fluctuations would not be reduced by inclusion of regional climate fluctuations in the Red Sea sea level method. Our analysis comprehensively supports our earlier conclusions of large-amplitude sea level variations during MIS 3 with a timing that is strongly similar to Antarctic-style climate variations.

Annotated record of the detailed examination of Mn deposits from DSDP Site 33, Leg 5 (Core 5-33-2)

The proposed location of Site 33 was over north-south Magnetic Anomaly 10 (Pittman-Heirtzler, 32 million years) in order (a) to provide a basis for comparison of the age of the basal sediments with the age based on the magnetic anomaly, (b) to provide a basis for evaluation of relative movement along the Pioneer and Mendocino Fracture Zones, and (c) by being paired with Site 34, to provide comparison of basement materials for adjacent positive and negative magnetic anomalies.

Annotated record of the detailed examination of Mn deposits from DSDP Site 34, Leg 5 (Core 5-34-17)

Site 34 had been located by the JOIDES Pacific Advisory Panel to be over a negative magnetic anomaly (31 million years B.P.) immediately to the east of Anomaly 10 (Site 33). The primary objective was to obtain samples of basement and basal sediment to provide comparison between adjacent positive and negative magnetic anomalies. A second objective was to obtain samples which would permit an analysis of the variability in sediment over relatively short distances (about 10 miles). Although basement had not been reached at Site 33 because of the unexpected chert, the use of a massive diamond bit at Site 34 permitted coring through the chert to basement at 383 meters below the sea floor. Even though the near basement sections of the paired sites (33 and 34) could not be compared, comparison would be possible above the chert layer.

Isotopic and magnetic provenance characterization of distal IRD in the Galicia Interior Basin (NW Iberia)

The sediments of the Galicia Interior Basin in NW Iberia Margin are of particular palaeoclimatic interest as they are located at the boundary where the climatic oscillations of the glacial interval were interrupted by extreme events such as Heinrich events. These events are well characterized in Northern North Atlantic areas, but little is known about their occurrence beyond the Ruddiman belt. This study presents a combined environmagnetic and geochemical approach to the provenance and characterization of distal ice-rafted detritus (IRD) that occurred during the last glacial period in core CI12PC3 from the Galicia Interior Basin. The last six Heinrich Layers were identified by their magneto-mineralogical and geochemical properties. Their Sr and Nd isotopic signatures indicated that the Laurentide Ice Sheet was the major source for HL1, HL2, HL4 and HL5. However, the European ice sheets also influenced the initial development stages of HL1, HL2, HL4. HL3, HL6 and partially HL1, HL2 and HL4 were influenced by more juvenile provinces, such as Iceland/Faroes sheets and/or by the Fram Strait/East Greenland nearby areas. Separate provenance analyses of the coarse and fine fractions in the studied Heinrich Layers also indicated that IRDs and glacial flour sources might not always be the same. Our results shed unequivocal evidence that Canadian-sourced distal IRD are preceded by European-sourced IRD, at least from the H4. In our view, LIS and EIS instabilities registered in the Iberian Margin respond to the same climate forcing at different velocities.

Magnetic properties contribution to the identification and provenance of marine sediments: distal IRD in the Galicia Interior Basin (NW Spain)

This paper discusses the advantages of using a combined environmagnetic and geochemical approach to the provenance and characterization of distal IRDs occurring during the Last Glacial Period in core CI12PC3 from the Galicia Interior Basin (GIB). Six Heinrich layers (HL1-6) have been identified in the area in base to the detection of distinct populations of exotic magnetic mineral assemblages alien to the local/regional sedimentation environment. Their extension has been determined by Ca/Sr and Si/Sr ratios and their provenance by 143Nd/144Nd and 87Sr/86Sr isotopic ratios and FORCs. The sedimentary expression of HL is characterized by the presence of distal Ice Rafted Detritus (IRD). Distal IRD magnetic signatures in the GIB consist of (i) an increase of one order of magnitude in the peak amplitude of magnetic susceptibility from background values, (ii) a general coarsening of the magnetic grain size in a mineral assemblage dominated by titano-magnetites, (iii) FORC distributions pushing towards the coarse MD or PSD component, and (iv) thermomagnetic curves depicting the occurrence of several magnetite phases. These four features are very different from the fine-grained biogenic magnetic assemblages characterized by the combination of lower MS and higher coercivity values that dominate the predominant mixtures of the non-interacting SSD and PSD components in the non-IRD influenced background sedimentation. Our results show that the last 70.000 yr of sedimentation in the GIB were controlled by the relative contribution of local detrital material derived from the Iberian Variscan Chain and IRD alien material from the iceberg melting during the Heinrich Events. They also show two main IRD provenance fields: Europe and Canada. And that the later is more important for for HL1, HL2, HL4 and HL5. FORCs analysis complemented the isotopic information and provided a very unique information, indicating that glacial flour may not always have the same provenance as IRD and that ice-melted derived suspended sediment has its own dynamics and may reach further and/or persists longer than IRD.

Incorporation of Hysteretic Effects in Model-Order Reduction Analysis of Magnetic Devices

The ability to predict the properties of magnetic materials in a device is essential to ensuring the correct operation and optimization of the design as well as the device behavior over a wide range of input frequencies. Typically, development and simulation of wide-bandwidth models requires detailed, physics-based simulations that utilize significant computational resources. Balancing the trade-offs between model computational overhead and accuracy can be cumbersome, especially when the nonlinear effects of saturation and hysteresis are included in the model. This study focuses on the development of a system for analyzing magnetic devices in cases where model accuracy and computational intensity must be carefully and easily balanced by the engineer. A method for adjusting model complexity and corresponding level of detail while incorporating the nonlinear effects of hysteresis is presented that builds upon recent work in loss analysis and magnetic equivalent circuit (MEC) modeling. The approach utilizes MEC models in conjunction with linearization and model-order reduction techniques to process magnetic devices based on geometry and core type. The validity of steady-state permeability approximations is also discussed.

Magnetic and Acoustic Investigations of Turbulent Spherical Couette Flow

Title of dissertation: MAGNETIC AND ACOUSTIC INVESTIGATIONS OF TURBULENT SPHERICAL COUETTE FLOW Matthew M. Adams, Doctor of Philosophy, 2016 Dissertation directed by: Professor Daniel Lathrop Department of Physics This dissertation describes experiments in spherical Couette devices, using both gas and liquid sodium. The experimental geometry is motivated by the Earth's outer core, the seat of the geodynamo, and consists of an outer spherical shell and an inner sphere, both of which can be rotated independently to drive a shear flow in the fluid lying between them. In the case of experiments with liquid sodium, we apply DC axial magnetic fields, with a dominant dipole or quadrupole component, to the system. We measure the magnetic field induced by the flow of liquid sodium using an external array of Hall effect magnetic field probes, as well as two probes inserted into the fluid volume. This gives information about possible velocity patterns present, and we extend previous work categorizing flow states, noting further information that can be extracted from the induced field measurements. The limitations due to a lack of direct velocity measurements prompted us to work on developing the technique of using acoustic modes to measure zonal flows. Using gas as the working fluid in our 60~cm diameter spherical Couette experiment, we identified acoustic modes of the container, and obtained excellent agreement with theoretical predictions. For the case of uniform rotation of the system, we compared the acoustic mode frequency splittings with theoretical predictions for solid body flow, and obtained excellent agreement. This gave us confidence in extending this work to the case of differential rotation, with a turbulent flow state. Using the measured splittings for this case, our colleagues performed an inversion to infer the pattern of zonal velocities within the flow, the first such inversion in a rotating laboratory experiment. This technique holds promise for use in liquid sodium experiments, for which zonal flow measurements have historically been challenging.

Magnetic multilayer fabrication technology with selective activation of SU-8 films

Developing magnetic multilayers are essential for reducing the core eddy current losses in the integrated power magnetic components (inductors/transformers). PVD based processes are typically used to achieve the multilayers with thin dielectric spacers. However, those processes are costly, and can be difficult to integrate. It is evident that cost effective alternative is needed. In recent years, electrochemical processes have been investigated to address these issues. One such method would be to successive metallization of insulating photoresists acting as spacer layer (such as SU-8) with soft magnetic films (such as Ni-Fe-Co alloys). This paper describes an experimental procedure to fabricate magnetic multilayers with a thin variant of SU-8 2 (< 1.5 µm) as inter-layers for integrated micro-inductors/transformers for power conversion applications.