Differential birefringence in Bragg gratings in multicore fiber under transverse stress

We present experimental measurements of the peak splitting of the reflection spectra of fiber Bragg gratings as a result of birefringence induced by transverse loading of a multicore fiber. Measurements show that the splitting is a function of the applied load and the direction of the load relative to the azimuth of the fiber. A model for calculating the stress in the fiber that is due to an applied load is in good agreement with our experimental observations.

Quadratic behaviour of fibre Bragg grating temperature coefficients

We describe the characterization of the temperature and strain responses of fiber Bragg grating sensors by use of an interferometric interrogation technique to provide an absolute measurement of the grating wavelength. The fiber Bragg grating temperature response was found to be nonlinear over the temperature range -70 °C to 80 °C. The nonlinearity was observed to be a quadratic function of temperature, arising from the linear dependence on temperature of the thermo-optic coefficient of silica glass over this range, and is in good agreement with a theoretical model.

Radial deformation measurement of a cylinder under compression using multicore fibre

A multicore fibre (MCF) sensor to measure the radial deformation of a compliant cylinder under compression is presented. The sensor is connectorised and need not be permanently bonded to the test object. A differential measurement technique using FBGs written into the MCF makes the sensor temperature insensitive. FBG measurement of axial strain of a cylinder under compression is also reported.

Two-axis accelerometer based on multicore fibre Bragg gratings

We report an accelerometer based upon a simple fibre cantilever constructed from a short length of multicore fibre(MCF) containing fibre Bragg gratings (FBGs). Two-axis measurement is demonstrated up to 3 kHz.

Sensing properties of germanate and tellurite glass optical fibres

Strain and thermal sensitivities of germanate and tellurite glass fibres were measured using a fibre Fabry-Perot (FFP) interferometer and fibre Bragg gratings (FBG). The strain phase sensitivity for germanate and tellurite fibre were 5900×103 rad/m and 5600×103 rad/m respectively at a central wavelength of 1540nm using FFP interferometer, which is consistent with the value of 1.22pm/µepsilon obtained for a germanate fibre FBG. The Young's modulus for germanate and tellurite fibre were also measured to be 58GPa and 37GPa. The thermal responses of germanate fibre were examined as 24.71 and 16.80 pm/°C at 1540nm and 1033nm wavelength using the FBG.

Fiber Bragg gratings of type I in SMF-28 and B/Ge fibre and type IIA B/Ge fibre under gamma radiation up to 0.54 MGy

The sensitivities of type I and IIA fibre Bragg gratings written to different reflectivities in SMF-28 and B/Ge fibres to ionizing radiation up to 0.54MGy are investigated. The Bragg wavelength shows a small and rapid increase at the start of irradiation followed by either a plateau (type I) or a decrease (type IIA).

Vectorial bending characteristics of long-period grating written in D-shaped fibre

The curvature- or bend-sensing response of long-period gratings (LPG) UV-inscribed in D-shaped fiber has been investigated experimentally. Strong fiber orientation dependence of the spectral response when such LPGs are subjected to dynamic bending has been observed and is shown to form the basis for new vector sensors.

Strain and temperature sensitivity of a single-mode polymer optical fiber

We have measured the optical phase sensitivity of fiber based on poly(methyl methacrylate) under near-single-mode conditions at 632.8 nm wavelength. The elongation sensitivity is 131±3 × 105 rad m-1 and the temperature sensitivity is -212±26 rad m -1 K-1. These values are somewhat larger than those for silica fiber and are consistent with the values expected on the basis of the bulk polymer properties. © 2005 Optical Society of America.

Integrating service user and practitioner expertise within a web-based system for collaborative mental-health risk and safety management

Objectives: To develop a decision support system (DSS), myGRaCE, that integrates service user (SU) and practitioner expertise about mental health and associated risks of suicide, self-harm, harm to others, self-neglect, and vulnerability. The intention is to help SUs assess and manage their own mental health collaboratively with practitioners. Methods: An iterative process involving interviews, focus groups, and agile software development with 115 SUs, to elicit and implement myGRaCE requirements. Results: Findings highlight shared understanding of mental health risk between SUs and practitioners that can be integrated within a single model. However, important differences were revealed in SUs' preferred process of assessing risks and safety, which are reflected in the distinctive interface, navigation, tool functionality and language developed for myGRaCE. A challenge was how to provide flexible access without overwhelming and confusing users. Conclusion: The methods show that practitioner expertise can be reformulated in a format that simultaneously captures SU expertise, to provide a tool highly valued by SUs. A stepped process adds necessary structure to the assessment, each step with its own feedback and guidance. Practice Implications: The GRiST web-based DSS (www.egrist.org) links and integrates myGRaCE self-assessments with GRiST practitioner assessments for supporting collaborative and self-managed healthcare.

The PHAR-QA project: competency framework for pharmacy practice—first steps, the results of the European Network Delphi round 1

PHAR-QA, funded by the European Commission, is producing a framework of competences for pharmacy practice. The framework is in line with the EU directive on sectoral professions and takes into account the diversity of the pharmacy profession and the on-going changes in healthcare systems (with an increasingly important role for pharmacists), and in the pharmaceutical industry. PHAR-QA is asking academia, students and practicing pharmacists to rank competences required for practice. The results show that competences in the areas of drug interactions, need for drug treatment and provision of information and service were ranked highest whereas those in the areas of ability to design and conduct research and development and production of medicines were ranked lower. For the latter two categories, industrial pharmacists ranked them higher than did the other five groups

Does the subject content of the pharmacy degree course influence the community pharmacist’s views on competencies for practice?

Do community pharmacists coming from different educational backgrounds rank the importance of competences for practice differently-or is the way in which they see their profession more influenced by practice than university education? A survey was carried out on 68 competences for pharmacy practice in seven countries with different pharmacy education systems in terms of the relative importance of the subject areas chemical and medicinal sciences. Community pharmacists were asked to rank the competences in terms of relative importance for practice; competences were divided into personal and patient-care competences. The ranking was very similar in the seven countries suggesting that evaluation of competences for practice is based more on professional experience than on prior university education. There were some differences for instance in research-related competences and these may be influenced, by education.

The production of a framework of competences for pharmacy practice in the European Union:the PHAR-QA project

Background and objectives: The goal of the PHAR-QA (Qualityassurance in European pharmacy education and training) project isthe production of a European framework of competences for pharmacypractice. This PHAR-QA framework (www.phar-qa.eu) will beEuropean and consultative i.e. it will be used for harmonization—butwill not to replace existing national QA systems.Methods: Using the proposals for competences produced by the previousPHARMINE(Pharmacy education in Europe; www.pharmine.eu) project, together with those of other sources, the authors produced a listof 68 personal and patient care competencies. Using internet surveytools the stakeholders—European pharmacy community (universitydepartment staff and students, community, hospital and industrialpharmacists, as well as pharmacists working in clinical biology andother branches, together with representatives of chambers and associations)—were invited to rank the proposals and add comments.Results and conclusions: Pharmacology and pharmacotherapy togetherwith competences such as ‘‘supply of appropriate medicinestaking into account dose, correct formulation, concentration, administrationroute and timing’’ ranked high. Other topics such as ‘‘currentknowledge of design, synthesis, isolation, characterisation and biologicalevaluation of active substances’’ ranked lower.Implications for practice: In the short term, it is anticipated that thissurvey will stimulate a productive discussion on pharmacy educationand practice by the various stakeholders. In the long term, thisframework could serve as a European model framework of competencesfor pharmacy practice.Acknowledgements: With the support of the Lifelong Learningprogramme of the European Union: 527194-LLP-1-2012-1-BEERASMUS-EMCR. This publication reflects the views only of theauthors; the Commission cannot be held responsible for any usewhich may be made of the information contained therein.

Diatom-based paleolimnological reconstruction of Quaternary environments in a Florida sinkhole lake

Despite lake sensitivity to climate change, few Florida paleolimnological studies have focused on changes in hydrology. Evidence from Florida vegetation histories raise questions about long-term hydrologic history of Florida lakes, and a 25-year limnological dataset revealed recent climate-driven effects on Lake Annie. The objectives of this research are (1) to use modern diatom assemblages to develop methods for reconstruction of climatic and anthropogenic change (2) to reconstruct both long-term and recent histories of Lake Annie using diatom microfossils. Paleoenvironmental reconstruction models were developed from diatom assemblages of various habitat types from modern lakes. Plankton and sediment assemblages were similar, but epiphytes were distinct, suggesting differences in sediment delivery from different parts of the lakes. Relationships between a variety of physical and chemical data and the diatoms from each habitat type were explored. Total phosphorus (TP), pH, and color were found to be the most relevant variables for reconstruction, with sediment and epiphyte assemblages having the strongest relationships to those variables, six calibration models were constructed from the combination of these habitat types and environmental variables. Reconstructions utilizing the weighted averaging models in this study may be used to directly reveal TP, color, and pH changes from a sediment record, which might be suggestive of hydrologic change as well. These variables were reconstructed from the diatom record from both a long-term (11,000 year) and short-term (100 year) record and showed an interaction between climate-driven and local land-use impacts on Lake Annie. The long-term record begins with Lake Annie as a wetland, then the lake filled to a high stand around 4000 years ago. A period of relative stability after that point was interrupted near the turn of the last century by subtle changes in diatom communities that indicate acidification. Abrupt changes in the diatom communities around 1970 AD suggest recovery from acidification, but concurrent hydrologic change intensified anthropogenic effects on the lake. Diatom evidence for alkalization and phosphorus loading correspond to changes seen in the limnological record.

Diatom-based paleolimnological reconstruction of regional climate and local land-use change from a protected sinkhole lake in southern Florida, USA

Despite their sensitivity to climate variability, few of the abundant sinkhole lakes of Florida have been the subject of paleolimnological studies to discern patterns of change in aquatic communities and link them to climate drivers. However, deep sinkhole lakes can contain highly resolved paleolimnological records that can be used to track long-term climate variability and its interaction with effects of land-use change. In order to understand how limnological changes were regulated by regional climate variability and further modified by local land-use change in south Florida, we explored diatom assemblage variability over centennial and semi-decadal time scales in an ~11,000-yr and a ~150-yr sediment core extracted from a 21-m deep sinkhole lake, Lake Annie, on the protected property of Archbold Biological Station. We linked variance in diatom assemblage structure to changes in water total phosphorus, color, and pH using diatom-based transfer functions. Reconstructions suggest the sinkhole depression contained a small, acidic, oligotrophic pond ~11000–7000 cal yr BP that gradually deepened to form a humic lake by ~4000 cal yr BP, coinciding with the onset of modern precipitation regimes and the stabilization of sea-level indicated by corresponding palynological records. The lake then contained stable, acidophilous planktonic and benthic algal communities for several thousand years. In the early AD 1900s, that community shifted to one diagnostic of an even lower pH (~5.6), likely resulting from acid precipitation. Further transitions over the past 25 yr reflect recovery from acidification and intensified sensitivity to climate variability caused by enhanced watershed runoff from small drainage ditches dug during the mid-twentieth Century on the surrounding property.