Évaluation de l’effet de faux souvenirs en vieillissement normal : validation de scores composites des fonctions temporale médiane et frontale et contribution aux hypothèses théoriques

L’avancement en âge est associé à plusieurs modifications cognitives, dont un déclin des capacités à mémoriser et/ou à rappeler les événements vécus personnellement. Il amène parallèlement une augmentation des faux souvenirs, c.-à-d. le rappel d’événements qui ne se sont pas réellement déroulés. Les faux souvenirs peuvent avoir d’importantes répercussions dans la vie quotidienne des personnes âgées et il importe donc de mieux comprendre ce phénomène en vieillissement normal. Des études ont démontré l’importance de la fonction des lobes temporaux médians (FTM)/mémoire et de la fonction des lobes frontaux (FF)/fonctions exécutives dans l’effet de faux souvenirs. Ainsi, la première étude de la thèse visait à valider en français une version adaptée d’une méthode proposée par Glisky, Polster, & Routhieaux (1995), permettant de mesurer ces fonctions cognitives (Chapitre 2). L’analyse factorielle de cette étude démontre que les scores neuropsychologiques associés à la mémoire se regroupent en un facteur, le facteur FTM/mémoire, alors que ceux associés aux fonctions exécutives se regroupent en un deuxième facteur, le facteur FF/fonctions exécutives. Des analyses « bootstrap » effectuées avec 1 000 ré-échantillons démontrent la stabilité des résultats pour la majorité des scores. La deuxième étude de cette thèse visait à éclairer les mécanismes cognitifs (FTM/mémoire et FF/fonctions exécutives) ainsi que théoriques de l’effet de faux souvenirs accru en vieillissement normal (Chapitre 3). La Théorie des Traces Floues (TTF; Brainerd & Reyna, 1990) propose des explications de l’effet de faux souvenirs pour lesquelles la FTM/mémoire semble davantage importante, alors que celles proposées par la Théorie de l’Activation et du Monitorage (TAM; Roediger, Balota, & Watson, 2001) sont davantage reliées à la FF/fonctions exécutives. Les tests neuropsychologiques mesurant la FTM/mémoire ainsi que ceux mesurant la FF/fonctions exécutives ont été administrés à 52 participants âgés (moyenne de 67,81 ans). Basé sur l’étude de validation précédente, un score composite de la FTM/mémoire et un score composite de la FF/fonctions exécutives ont été calculés pour chaque participant. Ces derniers ont d’abord été séparés en deux sous-groupes, un premier au score FTM/mémoire élevé (n = 29, âge moyen de 67,45 ans) et un deuxième au score FTM/mémoire faible (n = 23, âge moyen de 68,26 ans) en s’assurant de contrôler statistiquement plusieurs variables, dont le score de la FF/fonctions exécutives. Enfin, ces participants ont été séparés en deux sous-groupes, un premier au score FF/fonctions exécutives élevé (n = 26, âge moyen 68,08 ans) et un deuxième au score FF/fonctions exécutives faible (n = 25, âge moyen de 67,36 ans), en contrôlant les variables confondantes, dont le score de la FTM/mémoire. Les proportions de vraie et de fausse mémoire (cibles et leurres associatifs) ont été mesurées à l’aide d’un paradigme Deese-Roediger et McDermott (DRM; Deese, 1959; Roediger & McDermott, 1995), avec rappel et reconnaissance jumelée à une procédure « Je me souviens / Je sais » (Tulving, 1985) chez les 52 participants âgés ainsi que chez 22 jeunes (âge moyen de 24,59 ans), apparié pour les années de scolarité. D’abord, afin de tester l’hypothèse de la TTF (Brainerd & Reyna, 1990), ces proportions ont été comparées entre les jeunes adultes et les deux sous-groupes de personnes âgées catégorisées selon le score de la FTM/mémoire. Ensuite, afin de tester l’hypothèse de la TAM (Roediger et al., 2001), ces proportions ont été comparées entre les jeunes adultes et les deux sous-groupes de personnes âgées catégorisées selon le score de la FF/fonctions exécutives. Il s’agit de la première étude qui compare directement ces hypothèses à travers de nombreuses mesures de vraie et de fausse mémoire. Les résultats démontrent que seule la FTM/mémoire modulait l’effet d’âge en vraie mémoire, et de manière quelque peu indirecte, en fausse mémoire et dans la relation entre la vraie et la fausse remémoration. Ensuite, les résultats démontrent que seule la FF/fonctions exécutives jouerait un rôle dans la fausse reconnaissance des leurres associatifs. Par ailleurs, en des effets d’âge sont présents en faux rappel et fausse remémorations de leurres associatifs, entre les jeunes adultes et les personnes âgées au fonctionnement cognitif élevé, peu importe la fonction cognitive étudiée. Ces résultats suggèrent que des facteurs autres que la FTM/mémoire et la FF/fonctions exécutives doivent être identifiés afin d’expliquer la vulnérabilité des personnes âgées aux faux souvenirs. Les résultats de cette thèse sont discutés à la lumière des hypothèses théoriques et cognitives en faux souvenirs (Chapitre 4).

Photosensitivity of Laser Dye Mixtures in Polymer Matrix – A Photoacoustic Study

Laser induced photoacoustic (PA) technique is used in the study of photostability of polymethyl methacrylate (PMMA) films doped with Rhodamine 6G -Rhodamine B dye system. Energy transfer from a donor molecule to an acceptor molecule in a dye mixture affects the output of the dye system. Details of investigations on the role of laser power, modulation frequency and the irradiation wavelength on the photosensitivity of the dye mixture doped PMMA films are presented.

Studies on the Toughening of Epoxy Resins

This thesis aims to develop new toughened systems for epoxy resin via physical and chemical modifications. Initially the synthesis of DGEBA was carried out and the properties compared with that of the commercial sample. Subsequently the modifier resins to be employed were synthesized. The synthesized resin were characterized by spectroscopic method (FTIR and H NMR), epoxide equivalent and gel permeation chromatography. Chemical modification involves the incorporation of thermoset resins such a phenolics, epoxy novolacs, cardanol epoxides and unsaturated polyester into the epoxy resin by reactive belnding. The mechanical and thermal properties of the blends were studied. In the physical modification route, elastomers, maleated elastomers and functional elastomers were dispersed as micro-sized rubber phase into the continuous epoxy phase by a solution blending technique as against the conventional mechanical blending technique. The effect of matrix toughening on the properties of glass reinforced composites and the effect of fillers on the properties of commercial epoxy resin were also investigated. The blends were characterized by thermo gravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis, scanning electron microscopy and mechanical property measurements. Among the thermoset blends, substantial toughening was observed in the case of epoxy phenolic novolacs especially epoxy para cresol novolac (ECN). In the case of elastomer blending , the toughest blends were obtained in the case of maleic anhydride grafted NBR. Among functional elastomers the best results were obtained with CTBN. Studies on filled and glass reinforced composites employing modified epoxy as matrix revealed an overall improvement in mechanical properties

Conducting Polyaniline Composites as Microwave Absorbers

Conducting polymers are excellent microwave absorbers and they show technological advantage when compared with inorganic electromagnetic absorbing materials, being light weight , easily processable, and the ability of changing the electromagnetic properties with nature and amount of dopants, synthesis conditions, etc. In this paper we report the synthesis, dielectric properties, and expected application of conducting composites based on polyaniline (PAN). Cyclohexanone soluble conducting PAN composites of microwave conductivity 12.5 S/m was synthesized by the in situ polymerization of aniline in the presence of emulsion grade polyvinyl chloride. The dielectric properties of the composites, especially the dielectric loss, conductivity, dielectric heating coefficient , absorption coefficient, and penetration depth, were studied using a HP8510 vector network analyzer. The microwave absorption of the composites were studied at different frequency bands i.e, S, C, and X bands (2-12 GHz). The absorption coefficient was found to be higher than 200 m -' and it can be used for making microwave absorbers in space applications .

Dielectric Behavior of Natural Rubber Composites in Microwave Fields

In this article, we report the preparation of conducting natural rubber (NR) with polyaniline (Pani). NR was made into a conductive material by the compounding of NR with Pani in powder form. NR latex was made into a conductive material by the in situ polymerization of aniline in the presence of NR latex. Different compositions of Pani- NR semi-interpenetrating networks were prepared, and the dielectric properties of all of the samples were determined in microwave frequencies. The cavity perturbation techpique was used for this study. A HP8510 vector network analyzer with a rectangular cavity resonator was used for this study. S bands 2-4 GHz in frequency were used. Thermal studies were also carried out with thermogravimetric analysis and differential scanning calorimetry.

Dielectric Behavior of Natural Rubber Composites in Microwave Fields

In this article, we report the preparation of conducting natural rubber (NR) with polyaniline (Pani). NR was made into a conductive material by the compounding of NR with Pani in powder form. NR latex was made into a conductive material by the in situ polymerization of aniline in the presence of NR latex. Different compositions of Pani- NR semi-interpenetrating networks were prepared, and the dielectric properties of all of the samples were determined in microwave frequencies. The cavity perturbation techpique was used for this study. A HP8510 vector network analyzer with a rectangular cavity resonator was used for this study. S bands 2-4 GHz in frequency were used. Thermal studies were also carried out with thermogravimetric analysis and differential scanning calorimetry.

Effect of Different Forms of Poly o-Toluidine /Poly Vinyl Chloride Composites on Dielectric Propertiesin the Microwave Field

In this paper we report the preparation and dielectric properties of poly o-toluidine:poly vinyl chloride composites in pellet and film forms. The composites were prepared using ammonium persulfate initiator and HCl dopant. The characterization is done by TGA and DSC. The dielectric properties including dielectric loss, conductivity, dielectric constant, dielectric heating coefficient, absorption coefficient, and penetration depth were studied in the microwave field. An HP8510 vector network analyzer with rectangular cavity resonator was used for the study. Sbands (2-4 GHz), C band (5-8 GHz), and X band (8-12 GHz) frequencies were used in the microwave field. Comparisons between the pellet and film forms of composites were also included. The result shows that the dielectric properties in the microwave field are dependent on the frequency and on the method of preparation.

STUDIES ON THE DIELECTRIC BEHAVIOUR OF POLYPYRROLE AND ITS COMPOSITES WITH POLY (VINYL CHLORIDE)

Polypyrrole/poly (vinyl chloride) semi-interpenenzrtirtg networks of different compositions are prepared using anunonitun per sulfate initiator at room temperature in pellet.form and lilrrt form and their dielectric properties are studied at different microwave frequencies. An HP 8510 Vector network analyzer interfaced with a computer is used. The cavity-perturbation technique is employed for the study

Swelling behaviour of isora/natural rubber composites in oils used in automobiles

Natural rubber/isora fibre composites were cured at various temperatures. The solvent swelling characteristics of natural rubber composites containing both untreated and alkali treated fibres were investigated in aromatic and aliphatic solvents like toluene, and n-hexane. The diffusion experiments were conducted by the sorption gravimetric method. The restrictions on elastomer swelling exerted by isora fibre as well as the anisotropy of swelling of the composite have been confirmed by this study. Composite cured at 100°C shows the lowest percentage swelling. The uptake of aromatic solvent is higher than that of aliphatic solvent for the composites cured at all temperatures. The effect of fibre loading on the swelling behaviour of the composite was also investigated in oils like petrol, diesel, lubricating oil etc. The % swelling index and swelling coefficient of the composite were found to decrease with increase in fibre loading. This is due to the increased hindrance exerted by the fibres at higher fibre loadings and also due to the good fibre-rubber interactions. Maximum uptake of solvent was observed with petrol followed by diesel and then lubricating oil. The presence of bonding agent in the composites restrict the swelling considerably due to the strong interfacial adhesion. At a fixed fibre loading, the alkali treated fibre composite showed lower percentage swelling compared to the untreated one.

Mechanical Properties of Short-Isora-Fiber-Reinforced Natural Rubber Composites: Effects of Fiber Length, Orientation, and Loading; Alkali Treatment;and Bonding Agent

A series of short-isora-fiber-reinforced natural rubber composites were prepared by the incorporation of fibers of different lengths (6, 10, and 14 mm) at 15 phr loading and at different concentrations (10, 20, 30, and 40 phr) with a 10 mm fiber length. Mixes were also prepared with 10 mm long fibers treated with a 5% NaOH solution. The vulcanization parameters, processability, and stress-strain properties of these composites were analyzed. Properties such as tensile strength, tear strength, and tensile modulus were found to be at maximum for composites containing longitudinally oriented fibers 10 mm in length. Mixes containing fiber loadings of 30 phr with bonding agent (resorcinol-formaldehyde [RF] resin) showed mechanical properties superior to all other composites. Scanning electron microscopy (SEM) studies were carried out to investigate the fiber surface morphology, fiber pullout, and fiber-rubber interface. SEM studies showed that the bonding between the fiber and rubber was improved with treated fibers and with the use of bonding agent.

Complex methylene-blue-sensitized polyvinyl chloride: a polymer matrix for hologram recording

A new polymer matrix sensitized with methylene blue for use as an optical recording material is described here. The characterization is done to determine the optimal recording conditions. These films need no chemical development and are found to be stable for several months. The matrix has excellent shelf life and needs an exposure only as short as 20 s. Direct imaging was done on this material.

Conducting Polyaniline Composites as Microwave Absorbers

Conducting polymers are excellent microwave absorbers and they show technological advantage when compared with inorganic electromagnetic absorbing materials, being light weight , easily processable, and the ability of changing the electromagnetic properties with nature and amount of dopants, synthesis conditions, etc. In this paper we report the synthesis, dielectric properties, and expected application of conducting composites based on polyaniline (PAN). Cyclohexanone soluble conducting PAN composites of microwave conductivity 12.5 S/m was synthesized by the in situ polymerization of aniline in the presence of emulsion grade polyvinyl chloride. The dielectric properties of the composites, especially the dielectric loss, conductivity, dielectric heating coefficient , absorption coefficient, and penetration depth, were studied using a HP8510 vector network analyzer. The microwave absorption of the composites were studied at different frequency bands i.e, S, C, and X bands (2-12 GHz). The absorption coefficient was found to be higher than 200 m -' and it can be used for making microwave absorbers in space applications

Studies on the Effect of an External Flaw on the Tensile Strength of Short Kevlar Fiber-Thermoplastic Polyurethane Composites

The effect of an external flaw on the tensile strength of short kevlar fiber-thermoplastic composites has been studied with respect to fiber content, fiber orientation, location of the external flaw, and the temperature of test. The composites showed a three-step reduction in tensile strength with increasing flaw size. The critical flaw-length region was shifted to higher flaw-size levels with increasing fiber content. With increasing temperature, the critical flaw length was increased in the case of unfilled TPU, whereas it remained more or less constant in the case of short kevlar fiber-filled-TPU composite.

Cure Characteristics of Short Polyester Fiber-PolyurethaneElastomer Composite with Interfacial Bonding Agents Based on Polymeric 4,4'-Diphenylmethanediisocyanate

Cure characteristics of short polyester fiber-polyurethane composites with respect to different bonding agents (MD resins) based on 4, 4' diphenylmethanediisocyanate (MDI) and various diols like propyleneglycol (PG), polypropyleneglycol (PPG) and glycerol (GL) were studied. Tmax. - Tmin. of composites having MD resin were found to be higher than the composite without MD resin. Minimum torque and Tmax. - Tmin., scorch time and optimum cure time were increased with the increase of MDI equivalence. Optimum ratio of MDI / -of in the resin was found to be within the range of 1-1.5. It was observed from the cure characteristics that for getting better adhesion between short polyester fiber and the polyurethane matrix the best choice of MD resin was one based on MDI and 1:1 equivalent mixture of polypropyleneglycol and glycerol.

Studies on the curing of short polyester fiber-polyurethane elastomer composite with different interfacial bonding agents

The cure characteristics of short fiber-polyurethane elastomer were studied with respect to different fiber-matrix bonding agents. A hexamethylenetetramine- resorcinol -hydrated silica based bonding agent was found to affect the stability of the composite. A new bonding agent, TP resin, based on polymeric toluenediisocyanate and polypropylene glycol has been developed. Cure characteristics of the composite with and without TP resin at different fiber loadings were also compared. Minimum torque, scorch time and optimum cure time increased with fiber content. Maximum torque was consistently higher with TP resin at all fiber loadings.