Pineapple Leaf Fibers for Composites and Cellulose

Pineapple leaf fiber (PALF) which is rich in cellulose, abundantly available, relatively inexpensive, low density, nonabrasive nature, high filling level possible, low energy consumption, high specific properties, biodegradability and has the potential for polymer reinforcement. The utilization of pineapple leaf fiber (PALF) as reinforcements in thermoplastic and thermosetting resins in micro and nano form for developing low cost and lightweight composites is an emerging field of research in polymer science and technology. In this paper we examines the industrial applicabiliy of PALF, mainly for production of composite materials and special papers, chemical feedstocks (bromelin enzyme) and fabrics.

Mechanical, thermal and morphological characterization of polypropylene/biodegradable polyester blends with additives

The (bio)degradation of polyolefins can be accelerated by modifying the level of crystallinity or by incorporation of carbonyl groups by adding pro-oxidants to masterbatches or through exposure to ultraviolet irradiation. In this work we sought to improve the degradation of PP by adding cobalt, calcium or magnesium stearate to Ecoflex(R), PP or Ecoflex(R)/PP blends. The effect of the pro-oxidants on biodegradability was assessed by examining the mechanical properties and fluidity of the polymers. PP had higher values for tensile strength at break and Young`s modulus than Ecoflex(R), and the latter had little influence on the properties of PP in Ecoflex(R)/PP blends. However, the presence of pro-oxidants (except for calcium) reduced these properties. All of the pro-oxidants enhanced the fluidity of PP, a phenomenon that facilitated polymer degradation at high temperatures. (C) 2009 Elsevier Ltd. All rights reserved.

Extrusion and characterization of functionalized cellulose whiskers reinforced polyethylene nanocomposites

The surface of ramie cellulose whiskers has been chemically modified by grafting organic acid chlorides presenting different lengths of the aliphatic chain by an esterification reaction. The occurrence of the chemical modification was evaluated by FTIR and X-ray photoelectron spectroscopies, elemental analysis and contact angle measurements. The crystallinity of the particles was not altered by the chain grafting, but it was shown that covalently grafted chains were able to crystallize at the cellulose surface when using C18. Both unmodified and functionalized nanoparticles were extruded with low density polyethylene to prepare nanocomposite materials. The homogeneity of the ensuing nanocomposites was found to increase with the length of the grafted chains. The thermomechanical properties of processed nanocomposites were studied by differential scanning calorimetry (DSC), dynamical mechanical analysis (DMA) and tensile tests. A significant improvement in terms of elongation at break was observed when sufficiently long chains were grafted on the surface of the nanoparticles. It was ascribed to improved dispersion of the nanoparticles within the LDPE matrix. (C) 2009 Elsevier Ltd. All rights reserved.

Variabilidade molecular na região 3'UTR do gene do receptor da lipoproteína de baixa densidade - diversidade intra e intercontinental

As origens das populações e o processo de povoamento das Américas são questões bastante controversas e, por isso, têm sido amplamente estudadas. O gene LDLR (low density lipoprotein receptor), que está localizado no braço curto do cromossomo 19 (p13.1-p13.3) e possui 18 éxons, bem como uma porção 3’UTR onde ocorrem dois elementos Alu completos (chamados de U e D) e um parcial, foi escolhido para esclarecer esses e outros problemas de evolução e variação genética humana. O objetivo geral deste trabalho foi verificar o que esta região hipervariável, especificamente na sua porção U, nos indicaria sobre a história evolutiva das populações ameríndias. Para este trabalho foram analisadas amostras de DNA de indivíduos nativos da Mongólia (n=24), da Sibéria (n=26), das Américas do Norte (n=11), Central (n=26) e do Sul (n=16), totalizando 14 populações e 103 indivíduos. Essas amostras foram amplificadas pela técnica de PCR (polymerase chain reaction), utilizando-se primers específicos para o segmento hipervariável U e, posteriormente, foram elas seqüenciadas automaticamente. Quatorze sítios polimórficos foram encontrados, classificáveis em sete haplótipos, sendo que o sítio 3809 apresentou uma transversão de C para G não descrita na literatura. A estimativa geral de diversidade nucleotídica (π) foi de 0.62%, considerada alta para um marcador autossômico. Verificou-se uma certa uniformidade haplotípica entre a Ásia e a América, mas com a diferenciação maior ocorrendo entre a Mongólia e a América+Sibéria. Não foi detectada diferenciação significativa entre nativos sul e centro-americanos. De um modo geral, o estudo desse marcador confirmou uma provável origem asiática para as populações ameríndias e apoiou a hipótese de uma única onda de migração no processo de povoamento pré-histórico das Américas.

Early and post transition metal complexes as a single of combined components in the ethylene and isoprene polynerization

In this work is reported, in a first step, the effect of different experimental parameters and their relation with polymer properties using the homogeneous binary catalyst system composed by Ni(α-diimine)Cl2 (α-diimine = 1,4-bis(2,6-diisopropylphenyl)- acenaphthenediimine) and {TpMs*}V(Ntbu)Cl2 (TpMs* = hydridobis(3-mesitylpyrazol-1- yl)(5-mesitylpyrazol-1-yl)) activated with MAO. This complexes combination produces, in a single reactor, polyethylene blends with different and controlled properties dependent on the polymerization temperature, solvent and Nickel molar fraction (xNi). In second, the control of linear low density polyethylene (LLDPE) production was possible, using a combination of catalyst precursors {TpMs}NiCl (TpMs = hydridotris(3- mesitylpyrazol-1-yl)) and Cp2ZrCl2, activated with MAO/TMA, as Tandem catalytic system. The catalytic activities as well as the polymer properties are dependent on xNi. Polyethylene with different Mw and controlled branches is produced only with ethylene monomer. Last, the application group 3 metals catalysts based, M(allyl)2Cl(MgCl2)2.4THF (M = Nd, La and Y), in isoprene polymerization with different cocatalysts systems and experimental parameters is reported. High yields and polyisoprene with good and controlled properties were produced. The metal center, cocatalysts and the experimental parameters are determinant for the polymers properties and their control. High conversions in cis-1,4- or trans-1,4-polyisoprene were obtained and the polymer microstructure depending of cocatalyst and metal type. Combinations of Y and La precursors were effective systems for the cis/transpolyisoprene blends production, and the control of cis-trans-1,4-microstructures by Yttrium molar fraction (xY) variation was possible.

As relações da tríplice hélice no setor da carcinicultura do Rio Grande do Norte: uma análise a partir das abordagens da imersão social e da dependência de recursos

This work consists in a study of the Shrimp Industry in the state of Rio Grande do Norte, whose central issue relates to the understanding of how the Triple Helix (University, Government and the productive sector) interrelationship limits or expands the industry s innovation process. The study aims to understand how the Triple Helix relationship interferes in the innovation process of shrimp in Rio Grande do Norte. As the knowledge becomes the resource key for production methods, the generation of new technologies, new products and processes which demands joint and integrated action of the institutions comprising the Triple Helix: University, Government and productive sector, which possess the essential resources to innovate the process and can be maximized from cooperative relationships between the referred Institutions. Thus, in this work, it was sharply used the pioneering studies of Sabato and Botana (1968) regarding the cooperation relationship between the scientific-technological sphere, the governmental and the productive base, and studies on the Triple Helix approach, proposed by Etzkowitz and Leydesdorff (2000), in which the university has a key role in the process of technological and innovative development of countries and regions, and under which it is assigned to the very University - the character of the entrepreneurial institution, through the concept of entrepreneurial University. Aiming to overcome the criticism of Cooke (2005), regarding the limitations of the Triple Helix approach, in this study it was used - as analytical perspectives - the perspective of social immersion (Granovetter, 1985, 2005) and the theory of resources dependence (PFEFFER; SALANCIK, 1978). The analytical perspectives presented in here, despite of the different assumptions, are essential to eliminate the bias that one only approach can lead (ASTLEY; VAN DE VEM; 2007). The authors arguments focus on the fact that the integration is possible if the researcher acknowledged that different perspectives may have different descriptions of the same phenomenon. As a research strategy, this study is characterized as a study case, along with the proposed objectives - the qualitative method was used as an approach and, depending on the gathering of the sector s historical, a sectional longitudinal view approach was applied (VIEIRA, 2004). The primary and secondary data were used in order to understand the sector s evolutionary process and its inter-institutional relations - regarding the shrimp culture in Rio Grande do Norte - to promote the development, as the content was used for the technical analysis (BARDIN, 1977). The approach of social immersion and resources addiction dependence made it possible to understand that relationships are established within and between each sphere (university, government and productive sector) characterizing a network of low density relationships and strongly internal and external dependence. Based on the speech of Etzkowitz and Mello (2006), a successful Triple Helix strategy of innovation requires not only the involvement and commitment of the parts, within the institutional sphere and among them, but also the development of mechanisms to coordinate the multiple and complex interactions and interfaces, focusing on promoting both environment and context for innovation and learning; it can be acknowledge from study results that the shrimp in the State of the RN, although there are several institutional mechanisms to promote greater integration and technological development, has been presented disjointed - both internally and between the spheres - and under no legitimate practice when facing the innovational promotion and integration institutions. Due to those factors, the central institutions of the network are crucial to the promotion of innovations, spreading through their direct contacts the importance factor of the sustainable competitive activity in the world market and on the national level. However, it may be concluded, from the data, that the Triple Helix relations are interfering in a negative way on what concerns the promotion of innovations in the shrimp industry in RN

Efeito sacietogênico de um novo inibidor de tripsina da paçoca do amendoim com aumento plasmático de colecistocinina (cck)

Obesity is increasing, reaching epidemic levels in many regions of the world. Studies have shown that consumption of peanuts influences on weight control and this influence may be due to the action of trypsin inhibitors sacietogênica that condition increased plasma colescistocinina (CCK). Moreover, the peanut has other health benefits, and these assignments are guaranteed to increase their production and consumption of several of its products, including the paçoca peanut. The aim of this study was to identify the presence of a trypsin inhibitor in paçoca peanut and evaluate its effect on food intake, weight gain and histomorphological changes in swiss mice (n = 8) and Wistar rats (n = 6). Experimental diets were prepared based on the AIN-93G and supplemented with tack or peanut trypsin inhibitor partially purified paçoca peanut (AHTI). After each treatment, the animals were anesthetized and euthanized, their bloods were collected by cardiac puncture for the determination of CCK and other biochemical parameters (glucose, triglycerides, total cholesterol, high density lipoprotein, low density lipoprotein, glutamic-pyruvic transaminase, glutamic oxaloacetic transaminase and albumin) and their pancreas removed for histologic and morphometric analysis. The supplementation with paçoca peanut and the AHTI showed a decrease of body weight gain and food intake in both mice and rats, due to the satiety, since the animals showed no evidence of impairment of nutritional status conditioned by consumption the AHTI. There were also observed biochemical or morphological important when compared with controls. However, AHTI led to increased secretion of CCK, a peptide sacietogênico. Thus, these results indicate that AHTI present in paçoca peanut, is able to enhance the secretion of plasma CCK and thereby reduce the weight gain associated with lower food intake of experimenta animals

Ação Sacietogênica de um inibidor de tripsina da semente de tamarindo (Tamarindus indica L.)

The seeds are excellent sources of proteinase inhibitors and have been highlighted owing to various applications. Among these applications are those in effect on food intake and weight gain that stand out because of the increasing number of obese individuals. This study evaluated the effects of trypsin inhibitor present in the seed of tamarind (Tamarindus indica L.) reduction in weight gain, biochemical and morphological alterations in Wistar rats. For this, we partially purified a trypsin inhibitor tamarind seed. This inhibitor, ITT2 at a concentration of 25 mg / kg body weight, over a period of 14 days was able to reduce food intake in rats (n = 6) by approximately 47%, causing a reduction in weight gain approximately 70% when compared with the control group. With the evaluation of the in vivo digestibility was demonstrated that the animals lost weight due to satiety, presented by the reduction of food intake, since there were significant differences between true digestibility for the control group (90.7%) and the group treated with inhibitor (89.88%). Additionally, we checked the deeds of ITT2 on biochemical parameters (glucose, triglycerides, total cholesterol, high-density lipoprotein, low-density lipoprotein, glutamic-pyruvic transaminase, glutamic oxaloacetic transaminase, gamma glutamyl transferase albumin, globulin, total protein and C-reactive protein) and these, when assessed in the study groups showed no statistically significant variations. We also evaluate the histology of some organs, liver, stomach, intestine, and pancreas, and showed no changes. And to evaluate the effect of trypsin inhibitor on food intake due to the satiety is regulated by cholecystokinin (CCK) were measured plasma levels, and it was observed that the levels of CCK in animals receiving ITT2 were significantly higher ( 20 + 1.22) than in animals receiving only solution with casein (10.14 + 2.9) or water (5.92 + 1.15). Thus, the results indicate that the effect caused ITT2 satiety, reducing food intake, which in turn caused a reduction in weight gain in animals without causing morphological and biochemical changes, this effect caused by the elevation of plasma levels CCK

Adição de vermiculita expandida mícron em pastas de baixa densidade para cimentação de poços de petróleo

The northeastern region of Brazil has a large number of wells producing oil using a method of secondary recovery steam injection, since the oil produced in this region is essentially viscous. This recovery method puts the cement / coating on thermal cycling, due to the difference in coefficient of thermal expansion between cement and metal coating causes the appearance of cracks at this interface, allowing the passage of the annular fluid, which is associated with serious risk socioeconomic and environmental. In view of these cracks, a correction operation is required, resulting in more costs and temporary halt of production of the well. Alternatively, the oil industry has developed technology for adding new materials in cement pastes, oil well, providing high ductility and low density in order to withstand the thermo-mechanical loads generated by the injection of water vapor. In this context, vermiculite, a clay mineral found in abundance in Brazil has been applied in its expanded form in the construction industry for the manufacture of lightweight concrete with excellent insulation and noise due to its high melting point and the presence of air in their layers lamellar. Therefore, the vermiculite is used for the purpose of providing low-density cement paste and withstand high temperatures caused by steam injection. Thus, the present study compared the default folder containing cement and water with the folders with 6%, 8% and 10% vermiculite micron conducting tests of free water, rheology and compressive strength where it obtained the concentration of 8 % with the best results. Subsequently, the selected concentration, was compared with the results recommended by the API standard tests of filtered and stability. And finally, analyzed the results from tests of specific gravity and time of thickening. Before the study we were able to make a folder with a low density that can be used in cementing oil well in order to withstand the thermo-mechanical loads generated by steam injection

Concreto celular polimérico: influência na adição de resíduo de poliéster insaturado termofixo

This work addresses the production of lightweight concrete building elements, such as plates, prefabricated slabs for pre-molded and panels of fencing, presenting a singular concrete: the Lightweight Concrete, with special properties such low density and good strength, by means of the joint use of industrial waste of thermosetting unsaturated polyesters and biodegradable foaming agent, named Polymeric Lightweight Concrete. This study covered various features of the materials used in the composition of the Polymeric Lightweight Concrete, using a planning of factorial design 23, aiming at studying of the strength, production, dosage processes, characterization of mechanical properties and microstructural analysis of the transition zone between the light artificial aggregate and the matrix of cement. The results of the mechanical strength tests were analyzed using a computational statistics tool (Statistica software) to understand the behavior and obtain the ideal quantity of each material used in the formula of the Polymeric Lightweight Concrete. The definition of the ideal formula has the purpose of obtaining a material with the lowest possible dry density and resistance to compression in accordance with NBR 12.646/92 (≥ 2.5 MPa after 28 days). In the microstructural characterization by scanning electron microscopy it was observed an influence of the materials in the process of cement hydration, showing good interaction between the wrinkled face of the residue of unsaturated polyesters thermosetting and putty and, consequently, the final strength. The attaining of an ideal formula, given the Brazilian standards, the experimental results obtained in the characterization and comparison of these results with conventional materials, confirmed that the developed Polymeric Lightweight Concrete is suitable for the production of building elements that are advantageous for construction