A review of the crayfish fishery of Nigeria with special reference to the Cross River State

The fishery for crayfish is of considerable importance in the maritime region of the Cross River State, Nigeria, where it forms an important occupation of a host of fishermen. Crayfish landings from this State contributed 11% to the national marine fish landings within the period 1980 to 1984 and also in the same period the volume of crayfish alone formed 26% of the marine fish landings within the State. The species exploited as crayfish include Palaemon hastatus; Hippolysmata hastatoides, and Macrobrachium sp; mixed with the larval, and juveniles of pink shrimp Panaeus dourarum. They are generally small in size ranging from 7 cm (maximum) to 2.5 cm. Crayfish are caught all year round along the Niger Delta, but particularly along the river estuaries and littoral waters of the Cross River State with the highest production occurring in March to May. Crayfish are usually smoked, and occasionally sun-dried, and they form an indispensable food item in the diet of the people of the entire southern States in particular and Nigeria in general. It appears that crayfish landings could be substantially increased without depleting the stock, if a proper exploratory survey is undertaken of the Niger delta, and the Cross River estuaries to chart potentially rich grounds of this resource

A Simple Model For Predicting The Void Fraction Of Gas/Non-Newtonian Fluid Intermittent Flows In Upward Inclined Pipes

In this work, a simple correlation, which incorporates the mixture velocity, drift velocity, and the correction factor of Farooqi and Richardson, was proposed to predict the void fraction of gas/non-Newtonian intermittent flow in upward inclined pipes. The correlation was based on 352 data points covering a wide range of flow rates for different CMC solutions at diverse angles. A good agreement was obtained between the predicted and experimental results. These results substantiated the general validity of the model presented for gas/non-Newtonian two-phase intermittent flows.

Fishing gears survey of Lake Chad

The paper reports on a survey on gear assessment for the three intensive fishing seasons in Lake Chad (Nigeria). These seasons coincide with the flood period (Nov-Feb), the receding (March-June)and the recession period (July-September 2001). During this year the questionnaires were requested to ten fishers in each of the selected fishing islands. In the flood season, identified fishing gears on the lake included baited and un-baited Malian traps which constituted about 35% of the total gears recorded. While Ndurutu and Heri (Kung)traps represented, each, 3.2% of the total. About 15.9% of fishers employed hook lines of various length and sizes: Another 15.9% of fishers mounted fish fences (Dumba) during the season. Those that employ seine net accounted for about 11.1% while 9.5% use gill nets.The species belonging to the Cichilidae, Claridae and Osteoglossidae families dominated fish catches. During the receding period, hook lines and fences (Dumba) (6.20%) were found to be predominantly used on the lake due to reducing water level, followed by gill net and draw net which accounted for 17.9% and 16.1 % respectively. During the lake recession only two groups of active gears were recorded. Sixty percent of fishers use combined seine net with cutlass and scoop net, while 40% use to combine only cutlass with kabara net. Fish fences (Dumma)during the flood season were mounted with giant Malian traps of abut 1.5m by 0.5m diameter, covered with net of mesh size (6.3mm-25mm).Each Dumba contained between 150 and 2000 of such traps. Larger number of species was recorded from seine net followed by gill nets and the l kilometre multi mesh fleet drift net. The use of seine net and cutlass known as Genima was predominant during the lake recession

Über die Herkunft des starken Kabeljau-Jahrgangs 1996 in der Nordsee

Cod in the North Sea is expected to reach „Safe biological limit“ due to a strong 1996 year-class. The cod fry was seen first as 5 cm fingerlings in the catches during a hydroacoustic survey in the southeastern North Sea. Back-calculations of the water drift show with high probability that the respective spawning ground was situated in the southwestern North Sea.

Fishing gear survey of Kainji Lake, northern Nigeria, 1996

A survey was carried out in September 1996 alongside the annual frame survey of Kainji Lake, Nigeria. As in the previous surveys, there were 6 main fishing gear types in use on the lake, which included gill nets, drift nets, beach seines, cast nets, longlines (baited and foul hooking) acid fishing traps. A total of 813 canoes were sampled. The canoe lengths were similar to the previous gear surveys. Altogether 466 gill nets were measured. They had an average length of 149 m, and were mostly bottom set. Of the gill nets measured 68% had a mesh size below 3 inches the minimum mesh size allowable according to the Niger and Kebbi State Fisheries Edict, 1996. Of concern was the large increase in the number of 1 inch meshed nets recorded on the lake. Drift nets had a mean length of 74 m. A total of 88% of all drift nets measured had a mesh size below 2.5 inches, the minimum mesh size stipulated in the State Edict. A total number of 102 beach seines were sampled with a mean length of 110 m, the mesh size in use on the lake remained as 0.1 inches under the Edict beach seines are banned from fishing in Kainji Lake. The decline in the lengths of the beach seines (and therefore catch rates) recorded since l995 was encouraging in the light of the destructive nature of these nets. A total of 30 cast nets were sampled, they had a mean diameter of 9.8 and a mean mesh size of 1.9 inches. All the nets had a hanging ratio of 0.5. Of the cast nets measured 40% had a mesh size below the minimum size of 2 inches recommended by the State Fisheries Edicts. Of concern was the continued rise in the number of gill nets with mesh sizes less than 2 inches. There were 2 types of longlines in operation on the lake. The baited and the foul hooking longlines. They were mostly bottom set and the hook size nos. 12-14 (Kirby sea hook) were predominant. Two types of fishing traps were identified, one was covered with a mesh of thin cane, one with netting material. The fishing traps had a mean height of 0.8 m and a mean width at the vase of 0.53 m. The mean mesh size used was 0.86 inches. Citharinus was reported as the most targeted of all fish species on the lake. Synodontis membranaceous was also targeted by most gears especially the smaller meshed nets. Labeo and Tilapia were low on the list of targeted species but their incidence remains high in the catches. (PDF contains 27 pages)

Frame survey of Kainji Lake, northern Nigeria, 1996

Since 1993, annual frame surveys have been conducted by the Nigerian-German Kainji Lake Fisheries Promotion Project to determine the distribution and number of fishing localities, fishing canoes and fishing gears around Kainji Lake, Nigeria. The total number of fishing localities has increased from 221 in 1993 to 286 in 1996. The fishing localities included 245 permanent fishing villages, 29 permanent fishing camps, 8 temporary fishing camps (with fishermen from Kainji Lake) and 4 temporary fishing camps (with fishermen from outside Kainji Lake area). There was an increase in the total number of fishing entrepreneurs, fishing assistants and fishing canoes over the years. A total number of 5,499 fishing entrepreneurs, 12,449 fishing assistants and 9,278 fishing canoes were recorded during the 1996 frame survey. From 1995 there was a decrease in the number of shoreline fisherfolk and a decrease in the number of transport canoes, the number of engines remained the same. During the 1996 survey, a total number of 18,655 gill nets, 1,560 drift nets, 753 beach seines, 5,548 cast nets, 7,400 longlines and 36,979 traps were recorded. The concentration of the gears (number per km shoreline) was highest in substrata 06 and 08. The total number of gill nets increased from 17,680 in 1995 to 18,655 in 1996. For the remaining 5 gear types a decrease in number was observed. Despite increasing numbers of gears on the lake, of concern is the decline recorded in all the fishing methods of the number of gears owned by individual entrepreneurs. This was most notable in the gill net and longline fisheries. These two fisheries have the lowest daily catch values and coupled with the problem of gear theft on the lake, ownership in future, may be expected to fall further. The number of larger fishing units also declined as did the number of gears new entrants enter the fishery with. The decline is particularly worrying for the beach seine fishery where diversification into other fishing methods would be beneficial in light of the present ban on seines. The group of not active fishing entrepreneurs (those who do not themselves participate in fishing activities) had the highest ownership of gears whilst the new entrants into the fishery had the lowest. There was evidence that these new entrants into the fishery were using cast nets which is worrying given the trend of using smaller mesh size of this gearSince 1993, annual frame surveys have been conducted by the Nigerian-German Kainji Lake Fisheries Promotion Project to determine the distribution and number of fishing localities, fishing canoes and fishing gears around Kainji Lake, Nigeria. The total number of fishing localities has increased from 221 in 1993 to 286 in 1996. The fishing localities included 245 permanent fishing villages, 29 permanent fishing camps, 8 temporary fishing camps (with fishermen from Kainji Lake) and 4 temporary fishing camps (with fishermen from outside Kainji Lake area). There was an increase in the total number of fishing entrepreneurs, fishing assistants and fishing canoes over the years. A total number of 5,499 fishing entrepreneurs, 12,449 fishing assistants and 9,278 fishing canoes were recorded during the 1996 frame survey. From 1995 there was a decrease in the number of shoreline fisherfolk and a decrease in the number of transport canoes, the number of engines remained the same. During the 1996 survey, a total number of 18,655 gill nets, 1,560 drift nets, 753 beach seines, 5,548 cast nets, 7,400 longlines and 36,979 traps were recorded. The concentration of the gears (number per km shoreline) was highest in substrata 06 and 08. The total number of gill nets increased from 17,680 in 1995 to 18,655 in 1996. For the remaining 5 gear types a decrease in number was observed. Despite increasing numbers of gears on the lake, of concern is the decline recorded in all the fishing methods of the number of gears owned by individual entrepreneurs. This was most notable in the gill net and longline fisheries. These two fisheries have the lowest daily catch values and coupled with the problem of gear theft on the lake, ownership in future, may be expected to fall further. The number of larger fishing units also declined as did the number of gears new entrants enter the fishery with. The decline is particularly worrying for the beach seine fishery where diversification into other fishing methods would be beneficial in light of the present ban on seines. The group of not active fishing entrepreneurs (those who do not themselves participate in fishing activities) had the highest ownership of gears whilst the new entrants into the fishery had the lowest. There was evidence that these new entrants into the fishery were using cast nets which is worrying given the trend of using smaller mesh size of this gear. (PDF contains 44 pages)

Fisheries statistics of Kainji Lake, northern Nigeria, Nov. 1994 - Dec. 1998

Results are presented for the first 4 years data (1994-1998) of the Kainji Lake catch assessment survey, collected and analysed by the Nigerian-German Kainji Lake Fisheries Promotion Project. The following areas are covered: Methodology and alterations of the original sampling concept; Frame survey results - factors relating to the CAS; Catch assessment survey results - general; Gill net fishery; Drift net fishery; Beach seine fishery; Cast net fishery; Longline fishery; Trap fishery; and, Catch statistics from fisherwomen. (PDF contains 143 pages)

San Francisco Bay regional sediment management strategy development

The San Francisco Bay Conservation and Development Commission (BCDC), in continued partnership with the San Francisco Bay Long Term Management Strategies (LTMS) Agencies, is undertaking the development of a Regional Sediment Management Plan for the San Francisco Bay estuary and its watershed (estuary). Regional sediment management (RSM) is the integrated management of littoral, estuarine, and riverine sediments to achieve balanced and sustainable solutions to sediment related needs. Regional sediment management recognizes sediment as a resource. Sediment processes are important components of coastal and riverine systems that are integral to environmental and economic vitality. It relies on the context of the sediment system and forecasting the long-range effects of management actions when making local project decisions. In the San Francisco Bay estuary, the sediment system includes the Sacramento and San Joaquin delta, the bay, its local tributaries and the near shore coastal littoral cell. Sediment flows from the top of the watershed, much like water, to the coast, passing through rivers, marshes, and embayments on its way to the ocean. Like water, sediment is vital to these habitats and their inhabitants, providing nutrients and the building material for the habitat itself. When sediment erodes excessively or is impounded behind structures, the sediment system becomes imbalanced, and rivers become clogged or conversely, shorelines, wetlands and subtidal habitats erode. The sediment system continues to change in response both to natural processes and human activities such as climate change and shoreline development. Human activities that influence the sediment system include flood protection programs, watershed management, navigational dredging, aggregate mining, shoreline development, terrestrial, riverine, wetland, and subtidal habitat restoration, and beach nourishment. As observed by recent scientific analysis, the San Francisco Bay estuary system is changing from one that was sediment rich to one that is erosional. Such changes, in conjunction with increasing sea level rise due to climate change, require that the estuary sediment and sediment transport system be managed as a single unit. To better manage the system, its components, and human uses of the system, additional research and knowledge of the system is needed. Fortunately, new sediment science and modeling tools provide opportunities for a vastly improved understanding of the sediment system, predictive capabilities and analysis of potential individual and cumulative impacts of projects. As science informs management decisions, human activities and management strategies may need to be modified to protect and provide for existing and future infrastructure and ecosystem needs. (PDF contains 3 pages)

Grain growth in protoplanetary disks

The majority of young, low-mass stars are surrounded by optically thick accretion disks. These circumstellar disks provide large reservoirs of gas and dust that will eventually be transformed into planetary systems. Theory and observations suggest that the earliest stage toward planet formation in a protoplanetary disk is the growth of particles, from sub-micron-sized grains to centimeter- sized pebbles. Theory indicates that small interstellar grains are well coupled into the gas and are incorporated to the disk during the proto-stellar collapse. These dust particles settle toward the disk mid-plane and simultaneously grow through collisional coagulation in a very short timescale. Observationally, grain growth can be inferred by measuring the spectral energy distribution at long wavelengths, which traces the continuum dust emission spectrum and hence the dust opacity. Several observational studies have indicated that the dust component in protoplanetary disks has evolved as compared to interstellar medium dust particles, suggesting at least 4 orders of magnitude in particle- size growth. However, the limited angular resolution and poor sensitivity of previous observations has not allowed for further exploration of this astrophysical process.

As part of my thesis, I embarked in an observational program to search for evidence of radial variations in the dust properties across a protoplanetary disk, which may be indicative of grain growth. By making use of high angular resolution observations obtained with CARMA, VLA, and SMA, I searched for radial variations in the dust opacity inside protoplanetary disks. These observations span more than an order of magnitude in wavelength (from sub-millimeter to centimeter wavelengths) and attain spatial resolutions down to 20 AU. I characterized the radial distribution of the circumstellar material and constrained radial variations of the dust opacity spectral index, which may originate from particle growth in these circumstellar disks. Furthermore, I compared these observational constraints with simple physical models of grain evolution that include collisional coagulation, fragmentation, and the interaction of these grains with the gaseous disk (the radial drift problem). For the parameters explored, these observational constraints are in agreement with a population of grains limited in size by radial drift. Finally, I also discuss future endeavors with forthcoming ALMA observations.

Earthquake response of steel braces and braced steel frames

This thesis consists of three parts. Chapter 2 deals with the dynamic buckling behavior of steel braces under cyclic axial end displacement. Braces under such a loading condition belong to a class of "acceleration magnifying" structural components, in which a small motion at the loading points can cause large internal acceleration and inertia. This member-level inertia is frequently ignored in current studies of braces and braced structures. This chapter shows that, under certain conditions, the inclusion of the member-level inertia can lead to brace behavior fundamentally different from that predicted by the quasi-static method. This result is to have significance in the correct use of the quasi-static, pseudo-dynamic and static condensation methods in the simulation of braces or braced structures under dynamic loading. The strain magnitude and distribution in the braces are also studied in this chapter.

Chapter 3 examines the effect of column uplift on the earthquake response of braced steel frames and explores the feasibility of flexible column-base anchoring. It is found that fully anchored braced-bay columns can induce extremely large internal forces in the braced-bay members and their connections, thus increasing the risk of failures observed in recent earthquakes. Flexible braced-bay column anchoring can significantly reduce the braced bay member force, but at the same time also introduces large story drift and column uplift. The pounding of an uplifting column with its support can result in very high compressive axial force.

Chapter 4 conducts a comparative study on the effectiveness of a proposed non-buckling bracing system and several conventional bracing systems. The non-buckling bracing system eliminates buckling and thus can be composed of small individual braces distributed widely in a structure to reduce bracing force concentration and increase redundancy. The elimination of buckling results in a significantly more effective bracing system compared with the conventional bracing systems. Among the conventional bracing systems, bracing configurations and end conditions for the bracing members affect the effectiveness.

The studies in Chapter 3 and Chapter 4 also indicate that code-designed conventionally braced steel frames can experience unacceptably severe response under the strong ground motions recorded during the recent Northridge and Kobe earthquakes.

Active interaction control for civil structures

This thesis presents a civil engineering approach to active control for civil structures. The proposed control technique, termed Active Interaction Control (AIC), utilizes dynamic interactions between different structures, or components of the same structure, to reduce the resonance response of the controlled or primary structure under earthquake excitations. The primary control objective of AIC is to minimize the maximum story drift of the primary structure. This is accomplished by timing the controlled interactions so as to withdraw the maximum possible vibrational energy from the primary structure to an auxiliary structure, where the energy is stored and eventually dissipated as the external excitation decreases. One of the important advantages of AIC over most conventional active control approaches is the very low external power required.

In this thesis, the AIC concept is introduced and a new AIC algorithm, termed Optimal Connection Strategy (OCS) algorithm, is proposed. The efficiency of the OCS algorithm is demonstrated and compared with two previously existing AIC algorithms, the Active Interface Damping (AID) and Active Variable Stiffness (AVS) algorithms, through idealized examples and numerical simulations of Single- and Multi-Degree-of Freedom systems under earthquake excitations. It is found that the OCS algorithm is capable of significantly reducing the story drift response of the primary structure. The effects of the mass, damping, and stiffness of the auxiliary structure on the system performance are investigated in parametric studies. Practical issues such as the sampling interval and time delay are also examined. A simple but effective predictive time delay compensation scheme is developed.

Temperature, organic matter and the sustainability of aquatic systems

Changes in sustainability of aquatic ecosystems are likely to be brought about by the global warming that has been widely predicted. In this article, the effects of water temperature on water-bodies (lakes, oceans and rivers) are reviewed followed by the effects of temperature on aquatic organisms. Almost all aquatic organisms require exogenous heat before they can metabolise efficiently. An organism that is adapted to warm temperatures will have a higher rate of metabolism of food organisms and this increases feeding rate. In addition, an increase in temperature raises the metabolism of food organisms, so food quality can be altered. Where populations have a different tolerance to temperature the result is habitat partitioning. One effect of prolonged high temperature is that it causes water to evaporate readily. In the marine littoral this is not an important problem as tides will replenish water in pools. Small rain pools are found in many tropical countries during the rainy season and these become incompletely dried at intervals. The biota of such pools must have resistant stages within the life cycle that enable them to cope with periods of drying. The most important potential effects of global warming include (i) the alteration of existing coastlines, (ii) the development of more deserts on some land masses, (iii) higher productivity producing higher crop production but a greater threat of algal blooms and (iv) the processing of organic matter at surface microlayers.

Fluctuations in a tokamak plasma

An experimental investigation of low frequency floating potential fluctuations (f ≤ 200 kHz) in a research tokamak plasma using two spatially separated electrostatic probes has been performed. The spectra, correlation length, and the phase velocity of the fluctuations in both the radial and azimuthal direction have been determined. The propagation velocity in the toroidal direction was also measured and was found to be in the direction of electron current flow. The waves traveled azimuthally in the ion diamagnetic drift direction, even after the usual E x B rotation was taken into account. The electron density fluctuations associated with these oscillations were large, δn/n ≃ 0.35 - 0.50.

The spectra were found to have regularly spaced peaks which seemed to be related to specific azimuthal modes (m =1,2,3,...,etc. ) A parametric study was made to determine what effect plasma parameters had on these peaks. During periods of high electron density in the first 2 msec of the plasma lifetime, strong sawtooth type oscillations were observed. These oscillations typically had frequencies of approximately 10 kHz and were also present when large amounts of neutral gas were added during the discharge by a process called "gas puffing."

The results are compared with experimental observations made on other plasma devices with electric and magnetic probes and with microwave and CO₂ laser scattering techniques. (The scattering measurements are complimentary to the probe measurements since, in the former case, the wavelength is fixed by the scattering angle, but the oscillations could not be spatially localized.) The oscillations in the Caltech torus were probably related to a drift-tearing type instability which is thought to play a major role in the anomalous particle and energy flux observed in tokamaks. Comparisons are made between current theory and the experimental results. However, the theory for the observed oscillations is still in a rudimentary stage of development, and it is hoped that the present investigation will stimulate future analytical work.

Space-charge-limited current in fast neutron irradiated silicon

DC and transient measurements of space-charge-limited currents through alloyed and symmetrical n^+ν n^+ structures made of nominally 75 kΩcm ν-type silicon are studied before and after the introduction of defects by 14 MeV neutron radiation. In the transient measurements, the current response to a large turn-on voltage step is analyzed. Right after the voltage step is applied, the current transient reaches a value which we shall call "initial current" value. At longer times, the transient current decays from the initial current value if traps are present.

Before the irradiation, the initial current density-voltage characteristics J(V) agree quantitatively with the theory of trap-free space-charge-limited current in solids. We obtain for the electron mobility a temperature dependence which indicates that scattering due to impurities is weak. This is expected for the high purity silicon used. The drift velocity-field relationships for electrons at room temperature and 77°K, derived from the initial current density-voltage characteristics, are shown to fit the relationships obtained with other methods by other workers. The transient current response for t > 0 remains practically constant at the initial value, thus indicating negligible trapping.

Measurement of the initial (trap-free) current density-voltage characteristics after the irradiation indicates that the drift velocity-field relationship of electrons in silicon is affected by the radiation only at low temperature in the low field range. The effect is not sufficiently pronounced to be readily analyzed and no formal description of it is offered. In the transient response after irradiation for t > 0, the current decays from its initial value, thus revealing the presence of traps. To study these traps, in addition to transient measurements, the DC current characteristics were measured and shown to follow the theory of trap-dominated space-charge-limited current in solids. This theory was applied to a model consisting of two discrete levels in the forbidden band gap. Calculations and experiments agreed and the capture cross-sections of the trapping levels were obtained. This is the first experimental case known to us through which the flow of space-charge-limited current is so simply representable.

These results demonstrate the sensitivity of space-charge-limited current flow as a tool to detect traps and changes in the drift velocity-field relationship of carriers caused by radiation. They also establish that devices based on the mode of space-charge-limited current flow will be affected considerably by any type of radiation capable of introducing traps. This point has generally been overlooked so far, but is obviously quite significant.

Occurrence of the Macrocyclops distinctus (Richard) (Copepoda, cyclopoidida) in Rybinsk reservoir. [Translation of: Materialy po biologii i gidrologii Volzhskikh Vodokhranilishch. Moscow, Leningrad 1963, pp. 13-16]

This brief chapter describes the occurrence Macrocyclops distinctus in the littoral zone of the Rybinsk Reservoir. Sampling was undertaken in summer and autumn 1961. In order to facilitate distinction of M. distinctus and Macrocyclops fuscus the author presents drawings of the whole species and certain characteristic parts of the body, and also gives a description of M. distinctus, comparing it with M. fuscus.