Estudo teórico da contribuição do espalhamento nuclear não elástico na trajetória de prótons de energias entre 50 e 250 MeV em materiais de interesse em radiologia: aplicação em tomografia com prótons

The goal of this work is to study the process of interaction of protons with matter through Monte Carlo simulation. For this purpose, it was employed the SRIM program (Stopping and Range of Ions in Matter ) and MCNPX (Monte Carlo N-Particle eXtended) v2.50. This work is going to support the development of a tomography system with protons. It was studied the interaction of proton with the follow materials: Polimethyl Mehacralate (PMMA), MS20 Tissue Substitute and water. This work employed energies in range of 50 MeV and 250 MeV, that is the range of clinical interest. The energy loss of proton after cross a material layer, the decreasing of its intensity, the angular and lateral de ection of incident beam, including and excluding nuclear interactions. This work is related with Medical Physics and Material Physics, like interaction of radiation with matter, particle transport phenomena, and the experimental methods in Nuclear Physics like simulation and computational by Monte Carlo method

Stability of a Lipase Extracted from Seeds of Pachira aquatica in Commercial Detergents and Application Tests in Poultry Wastewater Pretreatment and Fat Particle Hydrolysis

A protein extract containing a plant lipase from oleaginous seeds of Pachira aquatica was tested using soybean oil, wastewater from a poultry processing plant, and beef fat particles as substrate. The hydrolysis experiments were carried out at a temperature of 40°C, an incubation time of 90 minutes, and pH 8.0-9.0. The enzyme had the best stability at pH 9.0 and showed good stability in the alkaline range. It was found that P. aquatica lipase was stable in the presence of some commercial laundry detergent formulations, and it retained full activity up to 0.35% in hydrogen peroxide, despite losing activity at higher concentrations. Concerning wastewater, the lipase increased free fatty acids release by 7.4 times and promoted the hydrolysis of approximately 10% of the fats, suggesting that it could be included in a pretreatment stage, especially for vegetable oil degradation.

Particle Physics in the teaching practice of the participants of the School of Physics CERN

A atualização dos currículos escolares e, em especial, a inserção de assuntos de física moderna e contemporânea já foram defendidos com justificativas satisfatórias, tanto por professores em atividade escolar como por pesquisadores da área de ensino de física. Entre os assuntos que deveriam ser discutidos encontramos a Física das Partículas Elementares. O ensino deste tópico é justificado pelo fato dele permitir a discussão: a) de uma nova visão de mundo; b) de uma visão mais adequada da ciência; c) da reinterpretação da Física Clássica; d) da dinâmica da Ciência e seu desenvolvimento; e) da contribuição dos diversos cientistas; f) do papel da experimentação; g) do investimento financeiro e cooperativo de diversos países e pesquisadores. No entanto, para que a inserção de assuntos de física moderna e contemporânea ocorra de maneira eficiente é necessária a atualização dos professores que já estão em docência escolar, bem como uma formação adequada daqueles que estão em processo de formação inicial. Neste sentido, desde 2010 a Sociedade Brasileira de Física realiza anualmente a Escola de Física do CERN, na qual participam professores brasileiros de física de escolas públicas do Ensino Médio. Nesta escola são desenvolvidas aulas sobre física de partículas, sessões experimentais e visitas aos laboratórios do CERN. Perante isso, investigamos como os professores participantes da Escola de Física do CERN abordam a física de partículas em suas aulas após participarem dela.

Moderating effect of ammonia on particle growth and stability of quasi-monodisperse silver nanoparticles synthesized by the Turkevich method

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Maxillary molar intrusion with zygomatic anchorage in open bite treatment: lateral and oblique cephalometric evaluation

Purpose We aimed to use lateral and oblique radiographs to evaluate dental and skeletal changes arising from maxillary molar intrusion with zygomatic anchorage in open bite patients. Methods We conducted a pilot study including nine patients (six females and three males; mean age, 18.7±5.1 years) with skeletal open bite treated with titanium miniplates for posterior dentoalveolar intrusion. Lateral and oblique (right and left, 45°) radiographs were obtained before (T1) and 6 months after intrusion (T2). A paired t test was used for statistical evaluation. Results The maxillary posterior teeth were intruded 2.03± 0.87 mm (p<0.01) with 450×g of force, which resulted in counterclockwise rotation of the mandible (1.57°, p=0.02) and clockwise rotation of the occlusal plane (4.27±2.66°, p=0.01). Anterior facial height decreased by a mean of 1.79±1.51 mm (p<0.01). No significant change in the palatal plane or in anteroposterior molar movement was observed. Conclusion The oblique radiograph at 45° was useful for the assessment of molar intrusion and anteroposterior displacement. The treatment of anterior open bite with skeletal anchorage provided intrusion of molars and counterclockwise rotation of the mandible, resulting in open bite closure.

Tratamento ortodôntico da agenesia de incisivo lateral superior com envolvimento de fratura radicular de incisivo central superior

Patients with agenesis of maxillary lateral incisor must have in your planning functional and aesthetic considerations, important to the success of the treatment, regardless of whether the choice of treatment is closing or opening and maintenance of space for rehabilitation with prosthesis. This choice will depend on factors such as skeletal and tooth structure and profile. Children and adolescents are the group of individuals most exposed to trauma and fracture of the maxillary lateral incisor due to the activities they perform. Proper diagnosis and good treatment are essential to the success of the treatment. This article aims to report a case of agenesis of the maxillary lateral incisor along with the involvement of a root fracture of the maxillary central incisor. The orthodontic treatment was successfully finished with a favorable prognosis for the fractured incisor to stay in a esthetic and functional position.

Avaliação radiográficada fusão das corticias lateral e medial do ramo mandibular: estudo em mandíbulas secas

Purpose: to radiographically evaluate the distance between mandibular lingula and the exact spot where buccal and lingual cortical bone plates merge in the mandibular ramus. Materials and Methods: 54 dry mandibles, divided into 3 subgroups (SG1: dentate, SG2: partially dentate and SG3: edentulous) were used in this study. Lingula position was marked with a metallic sphere and radiographs were taken. The distance between mandibular notch and lingula (I/L) and the distance between mandibular lingula and cortical bone plates fusion (L/FC) were measured. Statistical analysis was applied to the values obtained. Results: mean values for L/FC were 8,18mm, 7,30mm and 8,98mm for SG1, SG2 e SG3 respectively. Moreover, mean values for I/L were 14,02mm, 13,90mm and 12,34mm for SG1, SG 2 and SG3 respectively. The results also showed that cortical bone plates fusion took place in half I/L distance in 28,57% of the mandibles in SG1, in 46,67% of the mandibles in SG2 and in 9,09% of the pieces in SG3. Conclusions: there were no statistically significant differences in the height where cortical bone plates took place in all 3 subgroups. In SG3, the correlation between the mean value for L/FC and the mean value for I/L suggests a reduction in bone density and bone mass, which can correlate to the evaluation of older mandibles in this subgroup.

Gabaergic and opioid receptors mediate the facilitation of NaCl intake induced by α₂-adrenergic activation in the lateral parabrachial nucleus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Moxonidine into the lateral parabrachial nucleus modifies postingestive signals involved in sodium intake control

The activation of a2-adrenoceptors with bilateral injections of moxonidine (a2-adrenoceptor and imidazoline receptor agonist) into the lateral parabrachial nucleus (LPBN) increases 1.8% NaCl intake induced by treatment with furosemide (FURO) + captopril (CAP) subcutaneously. In the present study, we analyzed licking microstructure during water and 1.8% NaCl intake to investigate the changes in orosensory and postingestive signals produced by moxonidine injected into the LPBN. Male Sprague–Dawley rats were treated with FURO + CAP combined with bilateral injections of vehicle or moxonidine (0.5 nmol/0.2 ll) into the LPBN. Bilateral injections of moxonidine into the LPBN increased FURO + CAP-induced 1.8% NaCl intake, without changing water intake. Microstructural analysis of licking behavior found that this increase in NaCl intake was a function of increased number of licking bursts from 15 to 75 min of the test (maximum of 49 ± 9 bursts/bin, vs. vehicle: 2 ± 2 bursts/bin). Analysis of the first 15 min of the test, when most of the licking behavior occurred, found no effect of moxonidine on the number of licks/burst for sodium intake (24 ± 5 licks/burst, vs. vehicle: 27 ± 8 licks/burst). This finding suggests that activation of a2-adrenoceptors in the LPBN affects postingestive signals that are important to inhibit and limit sodium intake by FURO + CAP-treated rats.

Sodium intake combining cholinergic activation and noradrenaline into the lateral parabrachial nucleus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of particle size on the flexural strength and phase transformation of an airborne-particle abraded yttria-stabilized tetragonal zirconia polycrystal ceramic.

Statement of problem Because airborne-particle abrasion is an efficient method of improving the bond at the zirconia-cement interface, understanding its effect on the strength of yttria-stabilized tetragonal zirconia polycrystal is important. Purpose The purpose of this study was to evaluate the effect of the particle size used for airborne-particle abrasion on the flexural strength and phase transformation of a commercially available yttria-stabilized tetragonal zirconia polycrystal ceramic. Material and Methods For both flexural strength (20.0 × 4.0 × 1.2 mm) (n=14) and phase transformation (14.0-mm diameter × 1.3-mm thickness) (n=4), the zirconia specimens were made from Lava, and their surfaces were treated in the following ways: as-sintered (control); with 50-μm aluminum oxide (Al2O3) particles; with 120-μm Al2O3 particles; with 250-μm Al2O3 particles; with 30-μm silica-modified Al2O3 particles (Cojet Sand); with 120-μm Al2O3 particles, followed by 110-μm silica-modified Al2O3 particles (Rocatec Plus); and with Rocatec Plus. The phase transformation (%) was assessed by x-ray diffraction analysis. The 3-point flexural strength test was conducted in artificial saliva at 37°C in a mechanical testing machine. The data were analyzed by 1-way ANOVA and the Tukey honestly significant difference post hoc test (α=.05). Results Except for the Cojet Sand group, which exhibited statistically similar flexural strength to that of the as-sintered group and for the group abraded with 250-μm Al2O3 particles, which presented the lowest strength, airborne-particle abrasion with the other particle sizes provided the highest values, with no significant difference among them. The as-sintered specimens presented no monoclinic phase. The groups abraded with smaller particles (30 μm and 50 μm) and those treated with the larger ones (110 μm and/or 120 μm particles and 250 μm) exhibited percentages of monoclinic phase that varied from 4% to 5% and from 8.7% to 10%. Conclusions Except for abrasion with Cojet Sand, depending on the particle size, zirconia exhibited an increase or a decrease in its flexural strength. Airborne-particle abrasion promoted phase transformation (tetragonal to monoclinic), and the percentage of monoclinic phase varied according to the particle size.

Incomplete vertical root fracture associated with lateral compaction technique: a microscopic analysis

Objective: This study evaluated the effects of root canal obturation employing lateral compaction technique and spreader load of 1.5 kg on the incidence of complete (CVRF) or incomplete vertical root fractures (IVRF). Material and Methods: Twenty-seven distal roots of extracted human mandibular molars were used. All root canals were prepared by biomechanical step-back technique and obturated by lateral compaction technique. The prepared roots were distributed into two groups: G1- experimental (n = 17) and G2- control (n = 10). During obturation, load of 1.5 kg was applied to a size # 30 finger spreader. Pre- and post-obturation images of the coronal portion of the roots were captured by inverted digital microscopy and analyzed by one trained examiner. Data were evaluated by Fisher’s test (p < 0.05) using GrapH Pad Prism 5.0. Results: No roots exhibited CVRF. All fractures observed before and after obturation were IVRF or “other defects”. In G2 (control group), there was no increase of IVRF number. Interestingly, G1 presented an increase in the IVRF number to 70.59% in the 12 teeth out of 17 teeth studied. The statistical analysis showed that the mean of IVRF increased significantly in G1 when compared to G2 (p < 0.05). Conclusion: The application of a 1.5 kg spreader load during lateral compaction technique does not produce complete vertical root fractures, but may produce incomplete fractures or “other defects”.

Filling of simulated lateral canals with gutta percha or resilon when using thermomechanical compaction

Aims: To evaluate the filling of simulated lateral canals with gutta-percha or Resilon when using thermomechanical compaction. Setting and Design: Forty-five human single-rooted teeth were subjected to tooth decalcification and clearing. Materials and Methods: After root canal preparation, artificial lateral canals were made at 2, 5, and 8 mm from the working length (WL), corresponding to the apical, middle, and cervical thirds, respectively. The specimens were divided (n = 15) according to the filling material: Dentsply gutta-percha (GD), Odous gutta-percha (GO), and Resilon cones (RE). Root canals were obturated by thermomechanical compaction using a #45 compactor and no sealer. Lateral canals were analyzed by digital radiography and digital images after tooth decalcification and clearing using the Image Tool software. Statistical Analysis Used: Data were subjected to the Kruskal-Wallis and Dunn tests at 5% significance. Results: In the coronal third, RE and GO presented more filling ability than GD (P < 0.05). In the middle and apical thirds, RE presented the best results. Conclusions: Resilon demonstrated filling ability as material for root canal obturation by using thermomechanical compaction.

Influence of spacing in the upper lateral incisor area on the perception of smile esthetics among orthodontists and laypersons

Background: The aim of this study was to determine the perception of smile esthetics among orthodontists and laypeople with respect to the presence of diastemas in the upper lateral incisor in the mesial, distal, and both surfaces using an oblique smile analysis. Methods: Two standardized oblique photos of pleasant smiles from two white women were selected. Images were digitally altered to create diastemas in the lateral incisor, in 0.5-mm increments, in the mesial, distal, or both surfaces. Final images were randomly assembled in a photo album, which was given to 120 judgesd60 orthodontists and 60 laypersons. Each rater was asked to evaluate the attractiveness of the images on a visual analog scale. The data collected were submitted to statistical analysis by the means of one-way ANOVA with the Tukey post hoc test and the unpaired Student’s t test. Results: The most attractive smile was the one without spacing, and the presence of diastemas was considered unattractive by both groups of raters, following a pattern: the greater and the more mesially located, the more unattractive was the smile. Conclusions: The results of this study suggest that diastemas in the upper lateral incisor area were considered unattractive, following a pattern: the greater and the more mesially located, the more unattractive was the smile.