Toward a rational design of combination therapy in cancer.

By merging computational systems modeling and experimental approaches, we have uncovered treatments reprogramming pro-angiogenic monocytes present in breast tumor into immunologically potent cells capable of mediating an anti-tumor immune response. The unraveled pathways and ligands which underlie monocyte pro-angiogenic activity have a strong predictive value for breast cancer patient relapse - free survival.

Brightness of multilayer boards

A good appearance of a package enhances the sale of the product. The packing gives information about the content and instructions for the usage. In this master’s thesis, the optical properties of multilayer packaging board is studied. Especially means of increasing brightness of the multilayer board are evaluated. In the literature part, the effect of different factors on optical properties of a multilayer board are evaluated with the help of light scattering and absorption coefficients. The Kubelka-Munk theory can be used also in modelling brightness of the multilayer board. A large variety of different process factors, chemical aids and machine variables affect optical properties of board. In the experimental part, different methods to increase brightness of a 3-layer board were evaluated. It was discovered that brightness variation of broke (30 % share of the center layer pulp) have only minor influence on brightness of the board. The brightness variation must be high, roughly 9 % in order to alter brightness of the board by 1 %. Higher brightness can be achieved by bleaching the pulp, which holds the largest share of the center layer pulp. Here, 2,6 % increase in brightness of the pulp (60 % share of the center layer pulp) increased brightness of the board by 1 %. In a trial run at a board machine, there was no indication of decreased bulk of the board due to extended bleaching of the pulp. With pulp dyeing appearance and optical properties of a multilayer board can be influenced. By using bluish dyes the natural yellowness of pulps can be decreased and impression of whiteness is then increased. Brightness may deteriorate though, because of increasing light absorption of the dyed pulps. When the yellowness comes from the center layer pulp, the dye should be introduced there. Then the brightness decreasing effect of the dye decreases brightness of the board less. It was noticed that it is more important to maintain brightness of the top layer than brightness of the center layer, because the top layer pulp affects on brightness of the board the most. By introducing fillers into the top layer of a multilayer board it is possible to increase brightness of the board. Fillers with the highest light scattering increased the brightness of the board the most. Increasing light scattering increases brightness and also opacity. Higher opacity in the top layer decreases also the darkening effect of the center layer. Calcinated kaolin and PCC was found to increase the light scattering of the top layer the most at the filler comparison. Introducing fillers into the top layer of multilayer board may decrease bulk and modulus of elasticity of the top layer. This could lead to deteriorated bending stiffness.

Effect of humeral stem design on humeral position and range of motion in reverse shoulder arthroplasty.

PURPOSE: The impacts of humeral offset and stem design after reverse shoulder arthroplasty (RSA) have not been well-studied, particularly with regard to newer stems which have a lower humeral inclination. The purpose of this study was to analyze the effect of different humeral stem designs on range of motion and humeral position following RSA. METHODS: Using a three-dimensional computer model of RSA, a traditional inlay Grammont stem was compared to a short curved onlay stem with different inclinations (155°, 145°, 135°) and offset (lateralised vs medialised). Humeral offset, the acromiohumeral distance (AHD), and range of motion were evaluated for each configuration. RESULTS: Altering stem design led to a nearly 7-mm change in humeral offset and 4 mm in the AHD. Different inclinations of the onlay stems had little influence on humeral offset and larger influence on decreasing the AHD. There was a 10° decrease in abduction and a 5° increase in adduction between an inlay Grammont design and an onlay design with the same inclination. Compared to the 155° model, the 135° model improved adduction by 28°, extension by 24° and external rotation of the elbow at the side by 15°, but led to a decrease in abduction of 9°. When the tray was placed medially, on the 145° model, a 9° loss of abduction was observed. CONCLUSIONS: With varus inclination prostheses (135° and 145°), elevation remains unchanged, abduction slightly decreases, but a dramatic improvement in adduction, extension and external rotation with the elbow at the side are observed.

Design and physicochemical stability studies of paediatric oral formulations of sildenafil

Abstract Personalized medicine is a challenging research area in paediatric treatments. Elaborating new paediatric formulations when no commercial forms are available is a common practice in pharmacy laboratories; among these, oral liquid formulations are the most common. But due to the lack of specialized equipment, frequently studies to assure the efficiency and safety of the final medicine cannot be carried out. Thus the purpose of this work was the development, characterization and stability evaluation of two oral formulations of sildenafil for the treatment of neonatal persistent pulmonary hypertension. After the establishment of a standard operating procedure (SOP) and elaboration, the physicochemical stability parameters appearance, pH, particle size, rheological behaviour and drug content of formulations were evaluated at three different temperatures for 90 days. Equally, prediction of long term stability, as well as, microbiological stability was performed. Formulations resulted in a suspension and a solution slightly coloured exhibiting fruity odour. Formulation I (suspension) exhibited the best physicochemical properties including Newtonian behaviour and uniformity of API content above 90% to assure an exact dosification process.

Handbook of life design : from practice to theory and from theory to practice

Our lives and careers are becoming ever more unpredictable. The "life-design paradigm" described in detail in this ground-breaking handbook helps counselors and others meet people's increasing need to develop and manage their own lives and careers. Life-design interventions, suited to a wide variety of cultural settings, help individuals become actors in their own lives and careers by activating, stimulating, and developing their personal resources. This handbook first addresses life-design theory, then shows how to apply life designing to different age groups and with more at-risk people, and looks at how to train life-design counselors

The octagon, the hendecagon and the approximation of pi: the geometric design of the clypeus in the enclosure of Imperial cult in Tarraco

The ancient temple dedicated to the Roman Emperor Augustus on the hilltop of Tarraco (today’s Tarragona), was the main element of the sacred precinct of the Imperial cult. It was a two hectare square, bordered by a portico with an attic decorated with a sequence of clypeus (i.e. monumental shields) made with marble plates from the Luni-Carrara’s quarries. This contribution presents the results of the analysis of a three-dimensional photogrammetric survey of one of these clipeus, partially restored and exhibited at the National Archaeological Museum of Tarragona. The perimeter ring was bounded by a sequence of meanders inscribed in a polygon of 11 sides, a hendecagon. Moreover, a closer geometric analysis suggests that the relationship between the outer meander rim and the oval pearl ring that delimited the divinity of Jupiter Ammon can be accurately determined by the diagonals of an octagon inscribed in the perimeter of the clypeus. This double evidence suggests a combined layout, in the same design, of an octagon and a hendecagon. Hypothetically, this could be achieved by combining the octagon with the approximation to Pi used in antiquity: 22/7 of the circle’s diameter. This method allows the drawing of a hendecagon with a clearly higher precision than with other ancient methods. Even the modelling of the motifs that separate the different decorative stripes corroborates the geometric scheme that we propose.

An analysis of protocols and publications suggested that most discontinuations of clinical trials were not based on preplanned interim analyses or stopping rules.

OBJECTIVES: To investigate the frequency of interim analyses, stopping rules, and data safety and monitoring boards (DSMBs) in protocols of randomized controlled trials (RCTs); to examine these features across different reasons for trial discontinuation; and to identify discrepancies in reporting between protocols and publications. STUDY DESIGN AND SETTING: We used data from a cohort of RCT protocols approved between 2000 and 2003 by six research ethics committees in Switzerland, Germany, and Canada. RESULTS: Of 894 RCT protocols, 289 prespecified interim analyses (32.3%), 153 stopping rules (17.1%), and 257 DSMBs (28.7%). Overall, 249 of 894 RCTs (27.9%) were prematurely discontinued; mostly due to reasons such as poor recruitment, administrative reasons, or unexpected harm. Forty-six of 249 RCTs (18.4%) were discontinued due to early benefit or futility; of those, 37 (80.4%) were stopped outside a formal interim analysis or stopping rule. Of 515 published RCTs, there were discrepancies between protocols and publications for interim analyses (21.1%), stopping rules (14.4%), and DSMBs (19.6%). CONCLUSION: Two-thirds of RCT protocols did not consider interim analyses, stopping rules, or DSMBs. Most RCTs discontinued for early benefit or futility were stopped without a prespecified mechanism. When assessing trial manuscripts, journals should require access to the protocol.

Premature Discontinuation of Randomized Trials in Critical and Emergency Care: A Retrospective Cohort Study.

OBJECTIVES: Randomized clinical trials that enroll patients in critical or emergency care (acute care) setting are challenging because of narrow time windows for recruitment and the inability of many patients to provide informed consent. To assess the extent that recruitment challenges lead to randomized clinical trial discontinuation, we compared the discontinuation of acute care and nonacute care randomized clinical trials. DESIGN: Retrospective cohort of 894 randomized clinical trials approved by six institutional review boards in Switzerland, Germany, and Canada between 2000 and 2003. SETTING: Randomized clinical trials involving patients in an acute or nonacute care setting. SUBJECTS AND INTERVENTIONS: We recorded trial characteristics, self-reported trial discontinuation, and self-reported reasons for discontinuation from protocols, corresponding publications, institutional review board files, and a survey of investigators. MEASUREMENTS AND MAIN RESULTS: Of 894 randomized clinical trials, 64 (7%) were acute care randomized clinical trials (29 critical care and 35 emergency care). Compared with the 830 nonacute care randomized clinical trials, acute care randomized clinical trials were more frequently discontinued (28 of 64, 44% vs 221 of 830, 27%; p = 0.004). Slow recruitment was the most frequent reason for discontinuation, both in acute care (13 of 64, 20%) and in nonacute care randomized clinical trials (7 of 64, 11%). Logistic regression analyses suggested the acute care setting as an independent risk factor for randomized clinical trial discontinuation specifically as a result of slow recruitment (odds ratio, 4.00; 95% CI, 1.72-9.31) after adjusting for other established risk factors, including nonindustry sponsorship and small sample size. CONCLUSIONS: Acute care randomized clinical trials are more vulnerable to premature discontinuation than nonacute care randomized clinical trials and have an approximately four-fold higher risk of discontinuation due to slow recruitment. These results highlight the need for strategies to reliably prevent and resolve slow patient recruitment in randomized clinical trials conducted in the critical and emergency care setting.

Structure-Based, Rational Design of T Cell Receptors.

Adoptive cell transfer using engineered T cells is emerging as a promising treatment for metastatic melanoma. Such an approach allows one to introduce T cell receptor (TCR) modifications that, while maintaining the specificity for the targeted antigen, can enhance the binding and kinetic parameters for the interaction with peptides (p) bound to major histocompatibility complexes (MHC). Using the well-characterized 2C TCR/SIYR/H-2K(b) structure as a model system, we demonstrated that a binding free energy decomposition based on the MM-GBSA approach provides a detailed and reliable description of the TCR/pMHC interactions at the structural and thermodynamic levels. Starting from this result, we developed a new structure-based approach, to rationally design new TCR sequences, and applied it to the BC1 TCR targeting the HLA-A2 restricted NY-ESO-1157-165 cancer-testis epitope. Fifty-four percent of the designed sequence replacements exhibited improved pMHC binding as compared to the native TCR, with up to 150-fold increase in affinity, while preserving specificity. Genetically engineered CD8(+) T cells expressing these modified TCRs showed an improved functional activity compared to those expressing BC1 TCR. We measured maximum levels of activities for TCRs within the upper limit of natural affinity, K D = ∼1 - 5 μM. Beyond the affinity threshold at K D < 1 μM we observed an attenuation in cellular function, in line with the "half-life" model of T cell activation. Our computer-aided protein-engineering approach requires the 3D-structure of the TCR-pMHC complex of interest, which can be obtained from X-ray crystallography. We have also developed a homology modeling-based approach, TCRep 3D, to obtain accurate structural models of any TCR-pMHC complexes when experimental data is not available. Since the accuracy of the models depends on the prediction of the TCR orientation over pMHC, we have complemented the approach with a simplified rigid method to predict this orientation and successfully assessed it using all non-redundant TCR-pMHC crystal structures available. These methods potentially extend the use of our TCR engineering method to entire TCR repertoires for which no X-ray structure is available. We have also performed a steered molecular dynamics study of the unbinding of the TCR-pMHC complex to get a better understanding of how TCRs interact with pMHCs. This entire rational TCR design pipeline is now being used to produce rationally optimized TCRs for adoptive cell therapies of stage IV melanoma.

Design of flywheel generator for a diesel hybrid working machine

The aim of this work is to design a flywheel generator for a diesel hybrid working machine. In this work we perform detailed design of a generator. Mobile machines are commonly used in industry: road building machines, three harvesting machines, boring machines, trucks and other equipment. These machines work with a hydraulic drive system. This system provides good service property and high technical level. Manufacturers of mobile machines tend to satisfy all requirements of customers and modernized drive system. In this work also a description of the frequency inverter is present. Power electronics system is one of the basic parts for structures perform in the project.

Randomised, multicentre, phase III, open-label study of alectinib vs crizotinib in treatment-naïve anaplastic lymphoma kinase (ALK)-positive advanced NSCLC (ALEX study).

Background: In ∼5% of advanced NSCLC tumours, ALK tyrosine kinase is constitutively activated after translocation of ALK. ALK+ NSCLC was shown to be highly sensitive to the first approved ALK inhibitor, crizotinib. However, all pts eventually relapse on crizotinib mainly due to secondary ALK mutations/amplification or CNS metastases. Alectinib is a highly selective, potent, oral next-generation ALK inhibitor. Clinical phase II alectinib data in 46 crizotinib-naïve pts with ALK+ NSCLC reported an objective response rate (ORR) of 93.5% and a 1-year progression-free rate of 83% (95% CI: 68-92) (Inoue et al. J Thorac Oncol 2013). CNS activity was seen: of 14 pts with baseline brain metastasis, 11 had prior CNS radiation, 9 of these experienced CNS and systemic PFS of >12 months; of the 3 pts without prior CNS radiation, 2 were >15 months progression free. Trial design: Randomised, multicentre, phase III, open-label study in pts with treatment-naïve ALK+ advanced, recurrent, or metastatic NSCLC. All pts must provide pretreatment tumour tissue to confirm ALK rearrangement (by IHC). Pts (∼286 from ∼180 centres, ∼30 countries worldwide) will be randomised to alectinib (600mg oral bid, with food) or crizotinib (250mg oral bid, with/without food) until disease progression (PD), unacceptable toxicity, withdrawal of consent, or death. Stratification factors are: ECOG PS (0/1 vs 2), race (Asian vs non-Asian), baseline CNS metastases (yes vs no). Primary endpoint: PFS by investigators (RECIST v1.1). Secondary endpoints: PFS by Independent Review Committee (IRC); ORR; duration of response; OS; safety; pharmacokinetics; quality of life. Additionally, time to CNS progression will be evaluated (MRI) for the first time in a prospective randomised NSCLC trial as a secondary endpoint. Pts with isolated asymptomatic CNS progression will be allowed to continue treatment beyond documented progression until systemic PD and/or symptomatic CNS progression, according to investigator opinion. Time to CNS progression will be retrospectively assessed by the IRC using two separate criteria, RECIST and RANO. Further details: ClinicalTrials.gov (NCT02075840). Disclosure: T.S.K. Mok: Advisory boards: AZ, Roche, Eli Lilly, Merck Serono, Eisai, BMS, AVEO, Pfizer, Taiho, Boehringer Ingelheim, Novartis, GSK Biologicals, Clovis Oncology, Amgen, Janssen, BioMarin; board of directors: IASLC; corporate sponsored research: AZ; M. Perol: Advisory boards: Roche; S.I. Ou: Consulting: Pfizer, Chugai, Genentech Speaker Bureau: Pfizer, Genentech, Boehringer Ingelheim; I. Bara: Employee: F. Hoffmann-La Roche Ltd; V. Henschel: Employee and stock: F. Hoffmann-La Roche Ltd.; D.R. Camidge: Honoraria: Roche/Genentech. All other authors have declared no conflicts of interest.

Design and Validation of a Novel Generic Platform for the Production of Tetravalent IgG1-like Bispecific Antibodies.

We have designed and validated a novel generic platform for production of tetravalent IgG1-like chimeric bispecific Abs. The VH-CH1-hinge domains of mAb2 are fused through a peptidic linker to the N terminus of mAb1 H chain, and paired mutations at the CH1-CL interface mAb1 are introduced that force the correct pairing of the two different free L chains. Two different sets of these CH1-CL interface mutations, called CR3 and MUT4, were designed and tested, and prototypic bispecific Abs directed against CD5 and HLA-DR were produced (CD5xDR). Two different hinge sequences between mAb1 and mAb2 were also tested in the CD5xDR-CR3 or -MUT4 background, leading to bispecific Ab (BsAbs) with a more rigid or flexible structure. All four Abs produced bound with good specificity and affinity to CD5 and HLA-DR present either on the same target or on different cells. Indeed, the BsAbs were able to efficiently redirect killing of HLA-DR(+) leukemic cells by human CD5(+) cytokine-induced killer T cells. Finally, all BsAbs had a functional Fc, as shown by their capacity to activate human complement and NK cells and to mediate phagocytosis. CD5xDR-CR3 was chosen as the best format because it had overall the highest functional activity and was very stable in vitro in both neutral buffer and in serum. In vivo, CD5xDR-CR3 was shown to have significant therapeutic activity in a xenograft model of human leukemia.

Design of highly focused fields that remain unpolarized on axis

Research on the properties of highly focused fields mainly involved fully polarized light, whereas partially polarized waves received less attention. The aim of this Letter is to provide an appropriate framework, for designing some features of the focused field, when dealing with incoming partially polarized beams. In particular, in this Letter, we describe how to get an unpolarized field on the axis of a high numerical aperture objective lens. Some numerical results that corroborate theoretical predictions are provided.

Exploring new criteria to design materials for online education

Peer-reviewed