Influence of Interface Surface Geometries In The Tensile Characteristics Of Friction Welded Joints From Aluminium Alloys

Friction welding is a solid state joining process that produces coalescence in materials, using the heat developed between surfaces through a combination of mechanical induced rubbing motion and applied load. In rotary friction welding technique heat is generated by the conversion of mechanical energy into thermal energy at the interface of the work pieces during rotation under pressure. Traditionally friction welding is carried out on a dedicated machine because of its adaptability to mass production. In the present work, steps were made to modify a conventional lathe to rotary friction welding set up to obtain friction welding with different interface surface geometries at two different speeds and to carry out tensile characteristic studies. The surface geometries welded include flat-flat, flat-tapered, tapered-tapered, concave-convex and convex-convex. A comparison of maximum load, breaking load and percentage elongation of different welded geometries has been realized through this project. The maximum load and breaking load were found to be highest for weld formed between rotating flat and stationary tapered at 500RPM and the values were 19.219kN and 14.28 kN respectively. The percentage elongation was found to be highest for weld formed between rotating flat and stationary flat at 500RPM and the value was 21.4%. Hence from the studies it is cleared that process parameter like “interfacing surface geometries” of weld specimens have strong influence on tensile characteristics of friction welded joints

A crack on the interface of piezo-electric bodies

Singularities of elastic and electric fields are investigated at the tip of a crack on the interface of two anisotropic piezo-electric media under various boundary conditions on the crack surfaces. The Griffith formulae are obtained for increments of energy functionals due to growth of the crack and the notion of the energy release matrix is introduced. Normalization conditions for bases of singular solution are proposed to adapt them to the energy, stress, and deformation fracture criteria. Connections between these bases are determined and additional properties of the deformation basis related to the notion of electric surface enthalpy are established.

Ein XML-basiertes Modell für synchrone Gruppenarbeit auf gemeinsamen Informationsräumen

In dieser Arbeit wird ein generisches Modell fuer synchrone Gruppenarbeit auf gemeinsamen Informationsraeumen entwickelt. Fuer die Entwicklung dieses Modells muessen die Grundfunktionen fuer Anwendungen der synchronen Gruppenarbeit realisiert werden. Neben der Modellierung des Datenraumes (Datenmodell) und der operationellen Schnittstelle (Interaktionsmodell), muessen Mechanismen fuer die Darstellung der Aktivitaeten der Gruppenmitglieder auf dem Informationsraum (Awareness), sowie fuer die Synchronisierung gleichzeitiger Zugriffe verschiedener Benutzer auf dem Datenraum realisiert werden (Nebenlaeufgkeitskontrolle). Das Grundproblem bei der Loesung der Nebenlaeufigkeit liegt bei der Aufgabe der Isolation aus den klassischen ACID-Transaktionen zu gunsten von Awareness. Die rapide Entwicklung von Techniken der mobilen Kommunikation ermoeglicht den Einsatz dieser Geraete fuer den Zugriff auf Daten im Internet. Durch UMTSund WLAN-Technologien koennen Mobilgeraete fuer Anwendungen ueber die reine Kommunikation hinaus eingesetzt werden. Eine natuerliche Folge dieser Entwicklung sind Anwendungen fuer die Zusammenarbeit mehrerer Benutzer. In der Arbeit wird daher auf die Unterstuetzung mobiler Geraete besonderen Wert gelegt. Die Interaktion der Benutzer auf den gemeinsamen Datenraum wird durch einfache Navigationsoperationen mit einem Cursor (Finger) realisiert, wobei der Datenraum durch XML-Dokumente dargestellt wird. Die Visualisierung basiert auf der Transformierung von XML-Dokumenten in andere XML-basierte Sprachen wie HTML oder SVG durch XSLT-Stylesheets. Awareness-Informationen werden, aehnlich dem Fokus/Nimbus-Modell, von der Interaktion der Benutzer und der Ermittlung der sichtbaren Objekte bei dem Benutzer hergeleitet. Fuer eine geeignete Kontrolle der Nebenlaeufigkeit wurde der Begriff der visuellen Transaktion eingefuehrt, wo die Auswirkungen einer Transaktion von anderen Benutzern (Transaktionen) beobachtet werden koennen. Die Synchronisierung basiert auf einem Sperrverfahren und der Einfuehrung der neuen W-Sperre und der Grundoperationen readV und writeV. Das Modell (Groupware-Server) wird in der Arbeit in einem Prototyp implementiert. Weiterhin wird eine Java-Anwendung sowohl auf einem Desktop PC als auch auf einem Pocket PC (iPAQ 3970) implementiert, welche die Einsetzbarkeit dieses Prototyps demonstriert.

An Experimental Multimedia Process Control Room

The centralised control rooms of large industrial plants have separated people from the processes they should control. Perception is restricted mainly to the visual sense. Only telephone or radio links provide narrow-band voice communication with maintenance personnel down in the plant. Multimedia equipment can perceptionally bring back the operator into the plant while bodily keeping him the comfortable and safe control room. This involves video and audio transmission from process components as well as sights and sounds artificially generated from measurements. Groupware systems support inter-action between operators, engineers, and managers in different plants. With support from the German government, the state of Hessen, and industrial companies the Laboratory for Systems Engineering and Human-Machine Systems at the University of Kassel establishes an Experimental Multimedia Process Control Room. Core of this set-up are two high-performance graphics workstations linked to one of several process or vehicle simulators. Multimedia periphery includes video and teleconferencing equipment and a vibration and sound generation system.

Numerical Feasibility Study for Treated Wastewater Recharge as a Tool to Impede Saltwater Intrusion in the Coastal Aquifer of Gaza – Palestine

The ongoing depletion of the coastal aquifer in the Gaza strip due to groundwater overexploitation has led to the process of seawater intrusion, which is continually becoming a serious problem in Gaza, as the seawater has further invaded into many sections along the coastal shoreline. As a first step to get a hold on the problem, the artificial neural network (ANN)-model has been applied as a new approach and an attractive tool to study and predict groundwater levels without applying physically based hydrologic parameters, and also for the purpose to improve the understanding of complex groundwater systems and which is able to show the effects of hydrologic, meteorological and anthropogenic impacts on the groundwater conditions. Prediction of the future behaviour of the seawater intrusion process in the Gaza aquifer is thus of crucial importance to safeguard the already scarce groundwater resources in the region. In this study the coupled three-dimensional groundwater flow and density-dependent solute transport model SEAWAT, as implemented in Visual MODFLOW, is applied to the Gaza coastal aquifer system to simulate the location and the dynamics of the saltwater–freshwater interface in the aquifer in the time period 2000-2010. A very good agreement between simulated and observed TDS salinities with a correlation coefficient of 0.902 and 0.883 for both steady-state and transient calibration is obtained. After successful calibration of the solute transport model, simulation of future management scenarios for the Gaza aquifer have been carried out, in order to get a more comprehensive view of the effects of the artificial recharge planned in the Gaza strip for some time on forestall, or even to remedy, the presently existing adverse aquifer conditions, namely, low groundwater heads and high salinity by the end of the target simulation period, year 2040. To that avail, numerous management scenarios schemes are examined to maintain the ground water system and to control the salinity distributions within the target period 2011-2040. In the first, pessimistic scenario, it is assumed that pumping from the aquifer continues to increase in the near future to meet the rising water demand, and that there is not further recharge to the aquifer than what is provided by natural precipitation. The second, optimistic scenario assumes that treated surficial wastewater can be used as a source of additional artificial recharge to the aquifer which, in principle, should not only lead to an increased sustainable yield of the latter, but could, in the best of all cases, revert even some of the adverse present-day conditions in the aquifer, i.e., seawater intrusion. This scenario has been done with three different cases which differ by the locations and the extensions of the injection-fields for the treated wastewater. The results obtained with the first (do-nothing) scenario indicate that there will be ongoing negative impacts on the aquifer, such as a higher propensity for strong seawater intrusion into the Gaza aquifer. This scenario illustrates that, compared with 2010 situation of the baseline model, at the end of simulation period, year 2040, the amount of saltwater intrusion into the coastal aquifer will be increased by about 35 %, whereas the salinity will be increased by 34 %. In contrast, all three cases of the second (artificial recharge) scenario group can partly revert the present seawater intrusion. From the water budget point of view, compared with the first (do nothing) scenario, for year 2040, the water added to the aquifer by artificial recharge will reduces the amount of water entering the aquifer by seawater intrusion by 81, 77and 72 %, for the three recharge cases, respectively. Meanwhile, the salinity in the Gaza aquifer will be decreased by 15, 32 and 26% for the three cases, respectively.

Guía visual para el acceso y la utilización de Internet.

El trabajo es fruto de las actividades elaboradas para la fase presencial del 'Curso básico de Internet a distancia' organizado por el CPR de Cartagena-La Unión

Las estaciones de la imaginación : antología de materiales para la enseñanza práctica de la lengua oral y escrita en la Educación Secundaria a través de la experiencia literaria, visual y musical comparadas.

Corresponde a la segunda edición de la obra. Además de la antología, la obra contiene unos anexos explicativos y un glosario de términos detalladamente definidos

Valores en la educaci??n pl??stica y visual - I : reflexiones acerca del ??rea

En portada: Otra acepci??n del ??rea en la Ense??anza Secundaria Obligatoria. - En portada: abril 2006

Valores en la educación plástica y visual - II : ejemplificaciones.

En portada: actividades Un enfoque alternativo para el área en la ESO. - En portada: septiembre de 2006. - Bibliografía comentada (p. 88-90)

Educaci??n pl??stica y visual : contenidos digitales del curr??culo para primero de ESO Regi??n de Murcia

Unidades did??cticas digitales adaptadas al curr??culo educativo de la Regi??n de Murcia que sirven de apoyo al profesor en el aula, al tiempo que fomentan la interacci??n con los alumnos a trav??s de la tecnolog??a. Est??n concebidas como recursos complementarios al libro de texto tradicional. La publicaci??n forma parte del proyecto AULA XXI cuyo objetivo es avanzar en la integraci??n plena de las TIC en el ??mbito educativo regional. Se incluyen actividades de aprendizaje din??micas que favorecen una actitud m??s activa del alumno en clase, a la vez que le proporciona una gu??a para seguir los contenidos de repaso o ampliaci??n a trav??s de sistemas de autoevaluaci??n.

The Use of Grouping in Visual Object Recognition.

The report describes a recognition system called GROPER, which performs grouping by using distance and relative orientation constraints that estimate the likelihood of different edges in an image coming from the same object. The thesis presents both a theoretical analysis of the grouping problem and a practical implementation of a grouping system. GROPER also uses an indexing module to allow it to make use of knowledge of different objects, any of which might appear in an image. We test GROPER by comparing it to a similar recognition system that does not use grouping.

Pi: A Parallel Architecture Interface for Multi-Model Execution

This thesis defines Pi, a parallel architecture interface that separates model and machine issues, allowing them to be addressed independently. This provides greater flexibility for both the model and machine builder. Pi addresses a set of common parallel model requirements including low latency communication, fast task switching, low cost synchronization, efficient storage management, the ability to exploit locality, and efficient support for sequential code. Since Pi provides generic parallel operations, it can efficiently support many parallel programming models including hybrids of existing models. Pi also forms a basis of comparison for architectural components.