Análise e aferição de uma fresadora CNC através da utilização das tecnologias assistidas por computador, no escaneamento 3D de amostras e processamento de imagens

The use of computer-assisted technologies such as CAD - Computed Aided Design, CAM - Computed Aided Manufacturing, CAE - Computed Aided Engineering and CNC - Computed Numerical Control, are priorities in engineering and product designers. However, the dimensional measurement between the virtual and the real product design requires research, and dissemination procedures among its users. This work aims to use these technologies, through analysis and measurement of a CNC milling machine, designed and assembled in the university. Through the use of 3D scanning, and analyzing images of the machined samples, and its original virtual files, it was possible to compare the sizes of these samples in counterposition to the original virtual dimensions, we can state that the distortions between the real and virtual, are within acceptable limits for this type of equipment. As a secondary objective, this work seeks to disseminate and make more accessible the use of these technologies.

Design universal e acessibilidade: análise ergonomica de equipamentos de ginástica em espaços públicos

In recent years the availability of equipment for exercise in public places increased demand on the principles of universal design, ergonomics and accessibility, since they are intended for use by many different users. This paper presents an analysis of ergonomic equipment and discusses the main problems observed, as well as projective presents parameters for the development of new products.

Viabilidade econômica da implantação de compensadores série dinâmicos em redes de distribuição de energia elétrica

Pós-graduação em Engenharia Elétrica - FEIS

Sequência didática como instrumento para a aprendizagem significativa do efeito fotoelétrico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo hierárquico do sistema de reprodução entre e dentro de frutos, fluxo de pólen e estrutura genética espacial em um fragmento e em árvores isoladas na pastagem de hymenaea stigonocarpa mart. ex hayne na região de cerrado

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise espacial do potencial fotovoltaico em telhados de residências usando modelagem hierárquica bayesiana

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Conflitos e possibilidades entre atividade minerária e geoconservação na área do Geoparque Costões e Lagunas - RJ

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação energética do ciclo de refrigeração por absorção utilizando biogás de aterros sanitários e gás natural

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Imagens digitais na análise do uso da terra de uma microbacia como subsídio ao desenvolvimento sustentável

The present work sought to discriminate, to map and to quantify the areas of soil use of the Stream Monte Belo watershed - Botucatu (SP), obtained by digitale images. The cartographic bases were the shart planialtimetric, edited by IBGE (1969) and the satellite images LANDSAT - 7, passages of 21/01/1999, 08/01/2003 and 23/10/2006. The Software Idrisi Andes 15.0 were used for conversion of the analogical information for digital and for determination of the vegetable coverings areas. The results allowed to verify that the SIG - IDRISI Andes 15.0 were efficient in the quantification of the areas with soil use and that the analysis of the data showed a cash progress of the areas of reforestations to the detriment of the areas of pastures, especially from 1999, 2003 to 2006, when the field areas were substituted by the forestry in his totality. In spite of that progress, the forest areas that you correspond to the Permanent Preservation Areas, They are considerably preserved. That result comes to the encounter of the tendency of expansion of the forestry, especially after the installation of cellulose industries in the area, what worsened the environmental problems originating from of the practice of the monoculture.

Avaliação do desempenho das máquinas agrícolas na implantação da cultura do girassol

The sunflower oleaginous is the fourth of recognized importance in the oil production and few studies related to agricultural operations adopted for this crop. The objective of the present work was to study the performance of agricultural machines in the conventional tillage and reduced in the plantation of the sunflower crop. The experiment was installed at the Experimental Farm of Lageado, belonging to the Faculty of Agricultural Sciences of UNESP, located in Botucatu-SP. It consisted of two types of tillage (conventional tillage-CC and reduced tillage-CR), with experimental design in randomized blocks and four replications. The treatment CC promoted less coverage of the soil surface protected with waste when compared to CR treatment. The chisel plow was the tillage of equipment that required the tractor higher average traction force, average power traction and slippage, consequently, promoted lower average speed of work. The theoretical field capacity and area of land involved in the treatment CR were superior when compared to treatment CC, thereby lower consumption of fuel per hour worked was lower in CR treatment.

Mobilização do solo, velocidade de infiltração de água e taxa de cobertura do solo na grama esmeralda, sob manejos mecanizados

The excessive compaction of the soil observed in sod production systems, affects the physical attributes of the soil, which can influence the water infiltration into the soil and hence the rate of soil cover by turfgrasses and time of the sod production. To minimize the effects of soil compacting, some producers use soil preparation equipment that raises the soil on the surface but does not cause excessive roughness which may harm the quality of the sod. Thus, the aim of the present study was to evaluate the infiltration rate and soil cover rate due to different management mechanized in the zoysiagrass sod production. The experimental design had random plots and four replications. The treatments consisted of five mechanized managements of soil: witness (without the use of equipment); coulter blade disc harrow used once (1CB), coulter blade disc harrow used twice (2CB), surface chisel used once (1C), surface chisel and coulter blade disc harrow used once (1C + 1CB). The treatments with 2CB and 1C + 1CB provided greater basic water infiltration speed in the soil and higher rate of soil cover by the turfgrass. The rate of soil cover by turfgrass is positively correlated with water infiltration rate at 133 and 226 DAP, demonstrating the influence of managements used in zoysiagrass sod production and the increment in the infiltration rate of water. Soil preparation utilizing coulter blade disc harrow used twice or surface chisel and coulter blade disc harrow used once is recommended under the conditions this study was done.

Cuidados paliativos para pacientes em estado terminal em Unidades de Terapia Intensiva: revisão sistemática e metanálise

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito distrator do telefone celular sobre a condução simulada de automóveis: situações de uso manual e viva-voz

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise termoeconômica e eficiência ecológica de uma termoelétrica com absorção química de CO2

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Interpretação racional do ensaio DPL

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)