Local energy, the pre-envelope, and filter resolution

We examine the construction of new filters for computing local energy, and compare these filters with the Gabor filters and the three-point-filter of Venkatesh [l]. Further, we demonstrate that the effect of convolution with complex Gabor filters is to band-pass (with some differentiating effect) and compute the local energy of the result. The magnitude of the resulting local energy is then used to detect features [2], [3] (step features, texture etc.), and the phase is used to classify the detected features [l], [4] or provide disparity information for stereo [5] and motion work [6], [7]. Each of these types of information can be obtained at multiple resolutions, enabling the use of course to fine strategies for computing disparity, and allowing the discrimination of image textures on the basis of which parts of the Fourier domain they dominate [8], [9].

Acute rheumatic fever associated with household crowding in a developed country

Background: Acute rheumatic fever (ARF) and its sequelae, chronic rheumatic heart disease, remain important causes of morbidity and mortality worldwide, but there is little recent information about risk factors. The aim of this study was to examine the association between ARF and household crowding in New Zealand between 1996 and 2005.

Methods: This ecologic study used hospitalization data and census data to calculate incidence rates by census area unit (CAU). Rates of ARF were examined in relation to individual factors (age, ethnicity) and area factors based on the CAU of home address (household crowding, New Zealand deprivation index, household income, and proportion of children aged 5–14 years). The multivariate relationship between ARF incidence and CAU-based variables was assessed using a zero-inflated negative binomial model.

Results: This study included 1249 new cases of ARF between 1996 and 2005. At the univariate level, ARF rates were associated with household crowding across all age groups and ethnicities. ARF rates were significantly and positively related to household crowding after controlling for age, ethnicity, household income, and the density of children in the neighborhood. The incidence rate ratio was 1.065 (95% confidence interval, 1.052–1.079) for the total population.

Conclusions: In New Zealand, ARF rates are associated with household crowding at the CAU level. This finding supports action to reduce household crowding to improve health and reduce health inequalities. Our conclusion could be further investigated using a case-control study.

Role assessment of GIS analysis and its reliability while ranking urban sustainability using scenarios specific to regional climate, community and culture

Urban Sustainability expresses the level of conservation of a city while living a town or consuming its urban resources, but the measurement of urban sustainability depends on what are considered important indicators of conservation besides the permitted levels of consumption in accordance with adopted criteria. This criterion should have common factors that are shared for all the members tested or cities to be evaluated as in this particular case for Abu Dhabi, but also have specific factors that are related to the geographic place, community and culture, that is the measures of urban sustainability specific to a middle east climate, community and culture where GIS Vector and Raster analysis have a role or add a value in urban sustainability measurements or grading are considered herein. Scenarios were tested using various GIS data types to replicate urban history (ten years period), current status and expected future of Abu Dhabi City setting factors to climate, community needs and culture. The useful Vector or Raster GIS data sets that are related to every scenario where selected and analysed in the sense of how and how much it can benefit the urban sustainability ranking in quantity and quality tests, this besides assessing the suitable data nature, type and format, the important topology rules to be considered, the useful attributes to be added, the relationships which should be maintained between data types of a geo- database, and specify its usage in a specific scenario test, then setting weights to each and every data type representing some elements of a phenomenon related to urban suitability factor. The results of assessing the role of GIS analysis provided data collection specifications such as the measures of accuracy reliable to a certain type of GIS functional analysis used in an urban sustainability ranking scenario tests. This paper reflects the prior results of the research that is conducted to test the multidiscipline evaluation of urban sustainability using different indicator metrics, that implement vector GIS Analysis and Raster GIS analysis as basic tools to assist the evaluation and increase of its reliability besides assessing and decomposing it, after which a hypothetical implementation of the chosen evaluation model represented by various scenarios was implemented on the planned urban sustainability factors for a certain period of time to appraise the expected future grade of urban sustainability and come out with advises associated with scenarios for assuring gap filling and relative high urban future sustainability. The results this paper is reflecting are concentrating on the elements of vector and raster GIS analysis that assists the proper urban sustainability grading within the chosen model, the reliability of spatial data collected; analysis selected and resulted spatial information. Starting from selecting some important indicators to comprise the model which include regional culture, climate and community needs an example of what was used is Energy Demand & Consumption (Cooling systems). Thus, this factor is related to the climate and it‟s regional specific as the temperature varies around 30-45 degrees centigrade in city areas, GIS 3D Polygons of building data used to analyse the volume of buildings, attributes „building heights‟, estimate the number of floors from the equation, following energy demand was calculated and consumption for the unit volume, and compared it in scenario with possible sustainable energy supply or using different environmental friendly cooling systems this is followed by calculating the cooling system effects on an area unit selected to be 1 sq. km, combined with the level of greenery area, and open space, as represented by parks polygons, trees polygons, empty areas, pedestrian polygons and road surface area polygons. (initial measures showed that cooling system consumption can be reduced by around 15 -20 % with a well-planned building distributions, proper spaces and with using environmental friendly products and building material, temperature levels were also combined in the scenario extracted from satellite images as interpreted from thermal bands 3 times during the period of assessment. Other examples of the assessment of GIS analysis to urban sustainability took place included Waste Productivity, some effects of greenhouse gases measured by the intensity of road polygons and closeness to dwelling areas, industry areas as defined from land use land cover thematic maps produced from classified satellite images then vectors were created to take part in defining their role within the scenarios. City Noise and light intensity assessment was also investigated, as the region experiences rapid development and noise is magnified due to construction activities, closeness of the airports, and highways. The assessment investigated the measures taken by urban planners to reduce degradation or properly manage it. Finally as a conclusion tables were presented to reflect the scenario results in combination with GIS data types, analysis types, and the level of GIS data reliability to measure the sustainability level of a city related to cultural and regional demands.

In-situ studies of X-ray diffraction line profiles from strained copper foils

The development of an in-situ tensometer is described along with preliminary results of x-ray line profiles from copper foils under tensile stress. The tensometer was designed and constructed on the high resolution diffraction instrument, Station 2.3 at the synchrotron radiation source (SRS) Daresbury Laboratory, and is capable of collecting data in either symmetric or asymmetric geometry including transmission and reflection modes. Experiments were carried out using 18 J..Lm thick copper foil up to strain levels of 5 % using both symmetric reflection and symmetric transmission diffraction. All profiles displayed diffraction broadening and asymmetry which increased with strain. In addition, the asymmetry observed in symmetric transmission was associated with extended tails on the low angle side of the profiles, but in symmetric reflection data the opposite asymmetry was observed. In the analysis, the measured profiles were fitted using the software TOPAS, a fundamental parameters approach to profile fitting. The instrumental profile function was characterised and modelled using annealed LaB6 powder. The diffraction broadening was then determined by refining the convolution of a Voigt function, an asymmetric exponential function and a fixed instrument function to reproduce the observed broadened profiles. The integral breadth and asymmetry results display a strong order dependence and increase almost linearly with strain. The results were interpreted by assuming crystallite size broadening in combination with dislocation broadening arising from fcc a/2( 110) {Ill } dislocations.

The role of technology on the dynamics of coal consumption-economic growth: new evidence from China

Coal comprises 70% of primary energy sources and 80% of electricity generation in China. This paper investigates the coal consumption-economic growth nexus in an integrated demand-supply framework over the period from 1978 to 2010. We incorporate the role of coal technology to explain the growth process. Using the Autoregressive Distributed Lag bounds testing approach, we find improvement in the coal-to-electricity efficiency indicator, a proxy for coal technology, causing almost a 35% increase in real GDP in the long run. The Toda-Yamamoto causality test indicates unidirectional causality from coal consumption to economic growth, feedback effects both for coal-to-electricity efficiency indicator to economic growth and coal demand and openness to coal consumption. For a robustness check, we forecast the validity of the causal relationships beyond the sample horizon using the generalised forecast error variance decomposition method. Our analysis suggests that improving overall efficiency in coal sector will continue to play a significant role in maintaining sustainable growth in China in the long run.

Snakes on an island: independent introductions have different potentials for invasion

Snakes introduced to islands can be devastating to naïve native fauna. However, introduced populations must establish before range expansion (invasion) can occur. The factors that can determine successful invasion are those associated with the introduction event (e.g., characteristics of the founding population), the location (e.g., suitable environment and prey availability) and the species (e.g. life history characteristics). Here, we collected morphometric, ecological and genetic data on the recently introduced California Kingsnake (Lampropeltis californiae) in Gran Canaria. We found that snakes occurring at two locations a few 10 s of km apart do not represent the same population. Genetic analyses confirmed significant genetic difference (FST = 0.184; Dest = 0.341), and that despite being inbred (Fis = 0.245–0.257) the populations had high levels of diversity (Ho = 0.485–0.490; allelic richness = 4.875–6.364). Snakes at the different Gran Canaria locations were significantly different in morphology (colouration, mass, length and age), fitness (egg production) and diet (rodents, skinks, lizards and geckos), supporting a hypothesis of separate founding groups in combination with local environmental heterogeneity leading to variation between these populations. We concluded that one population was more successful than the other in reproduction and recruitment, and may be having a greater impact on endemic reptiles. We recommend greater eradication effort for this population, as well as monitoring of local fauna at all locations to access the impact of predation.

Degradation of organic dyes by P25-reduced graphene oxide: influence of inorganic salts and surfactants

Treatment of coloured effluent treatment is a major issue for the textile industry. In this study, catalyst P25-graphene was prepared and applied for degrading dye from an aqueous solution. Three types of dyes were selected to determine the feasibility of the catalyst for the dye degradation, including sulphonic, azoic, and fluorescent dyes. P25-graphene catalyst showed good ability to degrade all selected dyes. The influence of inorganic salts and surfactants on the photocatalytic degradation of rhodamine B using catalyst P25-graphene was also investigated. The degradation of rhodamine B was suppressed by the presence of NaCl, but the effect of Na2SO4 was negligible. The degradation of rhodamine B was significantly suppressed by all three types of surfactant, namely anionic, cationic and non-ionic surfactants. NMR technique was used to investigate the mechanisms associated with this suppression.

Epoxy nanocomposites containing magnetite-carbon nanofibers aligned using a weak magnetic field

Abstract Novel magnetite-carbon nanofiber hybrids (denoted by Fe3O4@CNFs) have been developed by coating carbon nanofibers (CNFs) with magnetite nanoparticles in order to align CNFs in epoxy using a relatively weak magnetic field. Experimental results have shown that a weak magnetic field (∼mT) can align these newly-developed nanofiber hybrids to form a chain-like structure in the epoxy resin. Upon curing, the epoxy nanocomposites containing the aligned Fe3O4@CNFs show (i) greatly improved electrical conductivity in the alignment direction and (ii) significantly higher fracture toughness when the Fe3O4@CNFs are aligned normal to the crack surface, compared to the nanocomposites containing randomly-oriented Fe3O4@CNFs. The mechanisms underpinning the significant improvements in the fracture toughness have been identified, including interfacial debonding, pull-out, crack bridging and rupture of the Fe3O4@CNFs, and plastic void growth in the polymer matrix.

Improving the toughness and electrical conductivity of epoxy nanocomposites by using aligned carbon nanofibres

There is an increasing demand for high performance composites with enhanced mechanical and electrical properties. Carbon nanofibres offer a promising solution but their effectiveness has been limited by difficulty in achieving directional alignment. Here we report the use of an alternating current (AC) electric field to align carbon nanofibres in an epoxy. During the cure process of an epoxy resin, carbon nanofibres (CNFs) are observed to rotate and align with the applied electric field, forming a chain-like structure. The fracture energies of the resultant epoxy nanocomposites containing different concentrations of CNFs (up to 1.6wt%) are measured using double cantilever beam specimens. The results show that the addition of 1.6wt% of aligned CNFs increases the electrical conductivity of such nanocomposites by about seven orders of magnitudes to 10^-2S/m and increases the fracture energy, G<inf>Ic</inf>, by about 1600% from 134 to 2345J/m². A modelling technique is presented to quantify this major increase in the fracture energy with aligned CNFs. The results of this research open up new opportunities to create multi-scale composites with greatly enhanced multifunctional properties.

Time-in-area represents foraging activity in a wide-ranging pelagic forager

Successful Marine Spatial Planning depends upon the identification of areas with high importance for particular species, ecosystems or processes. For seabirds, advancements in biologging devices have enabled us to identify these areas through the detailed study of at-sea behaviour. However, in many cases, only positional data are available and the presence of local biological productivity and hence seabird foraging behaviour is inferred from these data alone, under the untested assumption that foraging activity is more likely to occur in areas where seabirds spend more time. We fitted GPS devices and accelerometers to northern gannets Morus bassanus and categorised the behaviour of individuals outside the breeding colony as plunge diving, surface foraging, floating and flying. We then used the locations of foraging events to test the efficiency of 2 approaches: time-in-area and kernel density (KD) analyses, which are widely employed to detect highly-used areas and interpret foraging behaviour from positional data. For KD analyses, the smoothing parameter (h) was calculated using the ad hoc method (KDad hoc), and KDh=9.1, where h = 9.1 km, to designate core foraging areas from location data. A high proportion of foraging events occurred in core foraging areas designated using KDad hoc, KDh=9.1, and time-in-area. Our findings demonstrate that foraging activity occurs in areas where seabirds spend more time, and that both KD analysis and the time-in-area approach are equally efficient methods for this type of analysis. However, the time-in-area approach is advantageous in its simplicity, and in its ability to provide the shapes commonly used in planning. Therefore, the time-in-area approach can be used as a simple way of using seabirds to identify ecologically important locations from both tracking and survey data.

Heat affected zone microstructures and their influence on toughness in two microalloyed HSLA steels

Microstructures and Charpy impact properties have been examined in two microalloyed steels following heat treatments to simulate weld heat affected zone (HAZ) structures over a range of heat input conditions, characterised by the cooling time from 800 to 500°C (Δt8/5). The base materials were low carbon structural steel plates microalloyed with vanadium and nitrogen (V-N) and niobium (Nb), respectively. The toughnesses of the HAZs displayed remarkably different behaviours as shown by their impact transition temperatures. For the V-N steel, the toughness improved with increasingly rapid cooling (low heat input conditions) whereas the Nb steel showed an opposite trend. Some of this behaviour could be explained by the presence of coarse ferrite grains in the slowly cooled V-N steel. However, other conditions where all the structures were bainitic and rather similar in optical micrographs gave widely different toughness values. The recently developed method of five dimensional boundary analysis based on electron backscattering diffraction has been applied to these cases for the first time. This showed that the lath boundaries in the bainite were predominantly on {1 1 0} planes of the ferrite and that the average spacing of these boundaries varied depending on steel composition and cooling rate. Since {1 1 0} is also the slip plane in ferrite, it is considered that close spacing between the lath boundaries inhibits general plasticity at stress concentrations and favours initiation of fracture. The differences between the two steels are believed to be due to their transformation behaviours on cooling where precipitation of vanadium nitride in austenite accelerates ferrite formation and raises the temperature of the phase transformation in V-N steels.

Growth of single-walled carbon nanotubes from well-defined POSS nanoclusters structure

High-quality single-walled carbon nanotubes (SWNTs) with narrow diameter distribution can be generated from well-defined Si8O12 nanoclusters structure which form from thermal decomposition of chemically modified polyhedral oligomeric silsesquioxane (POSS). The nanosized SixOy particles were proved to be responsible for the SWNT growth and believed to be the reason for the narrow diameter distribution of the as-grown SWNTs. This could be extended to other POSS. The SWNTs grown from the nanosized SixOy particles were found to be semiconducting enriched SWNTs (s-SWNTs). A facile patterning technology, direct photolithography, was developed for generating SWNT pattern, which is compatible to industrial-level fabrication of SWNTs pattern for device applications. The metal-free growth together with preferential growth of s-SWNTs and patterning in large scale from the structure-defined silicon oxide nanoclusters not only represent a big step toward the control growth of SWNTs and fabrication of devices for applications particularly in nanoelectronics and biomedicine but also provide a system for further studying and understanding the growth mechanism of SWNTs from nanosized materials and the relationship between the structure of SWNT and nonmetal catalysts.

Comparison of various NMR methods for the indirect detection of nitrogen-14 nuclei via protons in solids

We present an experimental comparison of several through-space Hetero-nuclear Multiple-Quantum Correlation experiments, which allow the indirect observation of homo-nuclear single- (SQ) or double-quantum (DQ) ¹⁴N coherences via spy ¹H nuclei. These ¹H-{¹⁴N} D-HMQC sequences differ not only by the order of ¹⁴N coherences evolving during the indirect evolution, t1, but also by the radio-frequency (rf) scheme used to excite and reconvert these coherences under Magic-Angle Spinning (MAS). Here, the SQ coherences are created by the application of center-band frequency-selective pulses, i.e. long and low-power rectangular pulses at the ¹⁴N Larmor frequency, ν0(¹⁴N), whereas the DQ coherences are excited and reconverted using rf irradiation either at ν0(¹⁴N) or at the ¹⁴N overtone frequency, 2ν0(¹⁴N). The overtone excitation is achieved either by constant frequency rectangular pulses or by frequency-swept pulses, specifically Wide-band, Uniform-Rate, and Smooth-Truncation (WURST) pulse shapes. The present article compares the performances of four different ¹H-{¹⁴N} D-HMQC sequences, including those with ¹⁴N rectangular pulses at ν0(¹⁴N) for the indirect detection of homo-nuclear (i) ¹⁴N SQ or (ii) DQ coherences, as well as their overtone variants using (iii) rectangular or (iv) WURST pulses. The compared properties include: (i) the sensitivity, (ii) the spectral resolution in the ¹⁴N dimension, (iii) the rf requirements (power and pulse length), as well as the robustness to (iv) rf offset and (v) MAS frequency instabilities. Such experimental comparisons are carried out for γ-glycine and l-histidine.HCl monohydrate, which contain ¹⁴N sites subject to moderate quadrupole interactions. We demonstrate that the optimum choice of the ¹H-{¹⁴N} D-HMQC method depends on the experimental goal. When the sensitivity and/or the robustness to offset are the major concerns, the D-HMQC sequence allowing the indirect detection of ¹⁴N SQ coherences should be employed. Conversely, when the highest resolution and/or adjusted indirect spectral width are needed, overtone experiments are the method of choice. The overtone scheme using WURST pulses results in broader excitation bandwidths than that using rectangular pulses, at the expense of reduced sensitivity. Numerically exact simulations also show that the sensitivity of the overtone ¹H-{¹⁴N} D-HMQC experiment increases for larger quadrupole interactions.

Isotherm, kinetic, and thermodynamic equations for cefalexin removal from liquids using activated carbon synthesized from loofah sponge

Activated carbon (AC) developed from loofah sponge with phosphoric acid activation was applied to absorb cefalexin (CEX) in aqueous solution. AC was characterized by N2 adsorption–desorption isotherms and Fourier transform infrared spectroscopy (FTIR). Factors influencing the adsorption process were investigated. The equilibrium adsorption isotherms and kinetics of CEX were also studied. The results showed that AC prepared from loofah sponge had rough surface and abundant pores. The determination results of specific surface area (810.12 m²/g) and average pore size (5.28 nm) suggested the high adsorption capability. At low concentration, the AC could adsorb about 95% of CEX. The adsorption effect was independent of the temperature and pH. The maximum adsorption amount of CEX was about 55.11 mg/g at 308 K. The equilibrium data agreed well with Freundlich isotherm equation (R² = 0.9957) at 308 K, which indicated multilayer adsorption. FTIR analysis suggested the existence of phosphorus-containing functional groups, C–O bond, and C=C bond on the surface of AC of which the peak intensity of AC after adsorption was slightly lower after adsorption, indicating that the AC surface groups interacted with or were covered by the CEX species.