Controlling market power of vertically integrated firms in electricity networks: demand response of aggregator agents

This article reports the results of an experiment that examined how demand aggregators can discipline vertically-integrated firms - generator and distributor-retailer holdings-, which have a high share in wholesale electricity market with uniform price double auction (UPDA). We initially develop a treatment where holding members redistribute the profit based on the imposition of supra-competitive prices, in equal proportions (50%-50%). Subsequently, we introduce a vertical disintegration (unbundling) treatment with holding-s information sharing, where profits are distributed according to market outcomes. Finally, a third treatment is performed to introduce two active demand aggregators, with flexible interruptible loads in real time. We found that the introduction of responsive demand aggregators neutralizes the power market and increases market efficiency, even beyond what is achieved through vertical disintegration.

Conscience, discretion and the creation of property rights

This paper considers the utility of the concept of conscience or unconscionable conduct as a contemporary rationale for intervention in two principles applied where a person seeks to renege on an informal agreement relating to land: the principle in Rochefoucauld v Boustead; and transfers 'subject to' rights in favour of a claimant. By analysing the concept in light of our current understanding of the nature of judicial discretion and the use of general principles, it responds to arguments that unconscionability is too general a concept on which to base intervention. In doing so, it considers the nature of the discretion that is actually in issue when the court intervenes through conscience in these principles. However, the paper questions the use of constructive trusts as a response to unconscionability. It argues that there is a need, in limited circumstances, to separate the finding of unconscionability from the imposition of a constructive trust. In these limited circumstances, once unconscionability is found, the courts should have a discretion as to the remedy, modelled on that developed in the context of proprietary estoppel. The message underlying this paper is that many of the concerns expressed about unconscionability that have led to suggestions of alternative rationales for intervention can in fact be addressed whilst retaining an unconscionability analysis. Unconscionability remains a preferable rationale for intervention as it provides a common thread that links apparently separate principles and can assist our understanding of their scope.

Molecular design of a discrete chain-folding polyimide for controlled inkjet deposition of supramolecular polymers

A supramolecular polymer based upon two complementary polymer components is formed by sequential deposition from solution in THF, using a piezoelectric drop-on-demand inkjet printer. Highly efficient cycloaddition or ‘click’ chemistry afforded a well-defined poly(ethylene glycol) featuring chain-folding diimide end groups, which possesses greatly enhanced solubility in THF relative to earlier materials featuring random diimide sequences. Blending the new polyimide with a complementary poly(ethylene glycol) system bearing pyrene end groups (which bind to the chain-folding diimide units) overcomes the limited solubility encountered previously with chain-folding polyimides in inkjet printing applications. The solution state properties of the resulting polymer blend were assessed via viscometry to confirm the presence of a supramolecular polymer before depositing the two electronically complementary polymers by inkjet printing techniques. The novel materials so produced offer an insight into ways of controlling the properties of printed materials through tuning the structure of the polymer at the (supra)molecular level.

Paul Renner: the art of typography

The first study, in any language, of this German typographer and type designer. Renner’s work exemplifies central themes in German culture in the first half of the twentieth century. Starting as an artist and book designer in the Munich cultural renaissance, he was an early and prominent member of the Deutscher Werkbund. In the 1920s Renner worked in Frankfurt, one of the centres of socially-engaged modernism; around this time he began work on his enduring typeface, Futura. Moving to Munich, he ran the printing school that included Jan Tschichold among its teachers. In the crisis of 1933 he was detained and then dismissed from his post. Living through the Nazi years in inner emigration, Renner emer­ged as a voice of experience and reason in postwar debates.

History of the monotype corporation

This important new publication charts the history of the British Monotype Corporation in its significant years from 1897 to 1992. Its three sections cover the Corporation’s business history, typeface design history, and the technical history of Monotype’s composing machines. Written and edited by leading business and type industry experts, this is an indispensable reference for typographers and type designers, and for technology and business historians.

Local ownership and UN peacebuilding: discourse versus operationalization

The UN asserts that local ownership boosts the legitimacy and sustainabil- ity of peacebuilding by preserving the principles of self-determination and nonimposition in an activity that can contravene them. At the same time, it also perceives local ownership to imperil the achievement of its operational goals, thus bringing its normative and operational obligations into conflict. This article evaluates the UN’s discourse and operationalization of local ownership, showing that despite the UN’s invocation of ownership dis- course, it operationalizes ownership in restrictive ways that are intended to protect the achievement of operational goals but that consequently limit self-determination and increase imposition. Moreover, because of contra- dictions in the UN’s practices of ownership, it also undercuts its ability to re- alize the very operational goals that it is trying to protect. KEYWORDS: UN peacebuilding, local ownership, discourse vs. practice.

Design (provisional chapter title)

The move of parts of OUP's publishing operation from London to Oxford in the 1970s allowed the creation of a centralised art and design department. Drawing on material in the OUP archives this chapter traces the kinds of work that this department undertook and the subsequent devolution of design activities to publishing divisions. Book design at Oxford is considered both stylistically and in response to technological changes. The relationship with the Printing House and its design standards, the search for standardisation and the need for economy, and the specialist design skills demanded by OUP's publications are recurring themes. Innovations in using overseas suppliers and in the introduction of desktop publishing technology are located in relation the the organization of the design function at OUP and its relationship to editorial policies.The chapter concludes with a consideration of the corporate identity system introduced in 1998, and its relationship to previous manifestations of 'Oxford style'.

A reappraisal of Baskerville's Greek types

Ιn the eighteenth century the printing of Greek texts continued to be central to scholarship and discourse. The typography of Greek texts could be characterised as a continuation of French models from the sixteenth century, with a gradual dilution of the complexity of ligatures and abbreviations, mostly through printers in the Low Countries. In Britain, Greek printing was dominated by the university presses, which reproduced conservatively the continental models – exemplified by Oxford's Fell types, which were Dutch adaptations of earlier French models. Hindsight allows us to identify a meaningful development in the Greek types cut by Alexander Wilson for the Foulis Press in Glasgow, but we can argue that in the middle of the eighteenth century Baskerville was considering Greek printing the typographic environment was ripe for a new style of Greek types. The opportunity to cut the types for a New Testament (in an twin edition that included a generous octavo and a large quarto version) would seem perfect for showcasing Baskerville's capacity for innovation. His Greek type maintained the cursive ductus of earlier models, but abandoned complex ligatures and any hint of scribal flourish. He homogenised the modulation of the letter strokes and the treatment of terminals, and normalised the horizontal alignments of all letters. Although the strokes are in some letters too delicate, the narrow set of the style composes a consistent, uniform texture that is a clean break from contemporaneous models. The argument is made that this is the first Greek typeface that can be described as fully typographic in the context of the technology of the time. It sets a pattern that was to be followed, without acknowledgement, by Richard Porson nearly a century and a half later. The typeface received little praise by typographic historians, and was condemned by Victor Scholderer in his retrospective of Greek typography. A survey of typeface reviews in the surrounding decades establishes that the commentators were mostly reproducing the views of an arbitrary typographic orthodoxy, for which only types with direct references to Renaissance models were acceptable. In these comments we detect a bias against someone considered an arriviste in the scholarly printing establishment, as well as a conservative attitude to typographic innovation.

Fabrication and integration of planar electrodes for contactless conductivity detection on polyester-toner electrophoresis microchips

In this report, we describe the microfabrication and integration of planar electrodes for contactless conductivity detection on polyester-toner (PT) electrophoresis microchips using toner masks. Planar electrodes were fabricated by three simple steps: (i) drawing and laser-printing the electrode geometry on polyester films, (ii) sputtering deposition onto substrates, and (iii) removal of toner layer by a lift-off process. The polyester film with anchored electrodes was integrated to PT electrophoresis microchannels by lamination at 120 degrees C in less than 1 min. The electrodes were designed in an antiparallel configuration with 750 mu m width and 750 gm gap between them. The best results were recorded with a frequency of 400 kHz and 10 V-PP using a sinusoidal wave. The analytical performance of the proposed microchip was evaluated by electrophoretic separation of potassium, sodium and lithium in 150 mu m wide x 6 mu m deep microchannels. Under an electric field of 250 V/cm the analytes were successfully separated in less than 90 s with efficiencies ranging from 7000 to 13 000 plates. The detection limits (S/N = 3) found for K+, Na+, and Li+ were 3.1, 4.3, and 7.2 mu mol/L, respectively. Besides the low-cost and instrumental simplicity, the integrated PT chip eliminates the problem of manual alignment and gluing of the electrodes, permitting more robustness and better reproducibility, therefore, more suitable for mass production of electrophoresis microchips.

Dynamic Solid Phase DNA Extraction and PCR Amplification in Polyester-Toner Based Microchip

A variety of substrates have been used for fabrication of microchips for DNA extraction, PCR amplification, and DNA fragment separation, including the more conventional glass and silicon as well as alternative polymer-based materials. Polyester represents one such polymer, and the laser-printing of toner onto polyester films has been shown to be effective for generating polyester-toner (PeT) microfluidic devices with channel depths on the order of tens of micrometers. Here, we describe a novel and simple process that allows for the production of multilayer, high aspect-ratio PeT microdevices with substantially larger channel depths. This innovative process utilizes a CO(2) laser to create the microchannel in polyester sheets containing a uniform layer of printed toner, and multilayer devices can easily be constructed by sandwiching the channel layer between uncoated cover sheets of polyester containing precut access holes. The process allows the fabrication of deep channels, with similar to 270 mu m, and we demonstrate the effectiveness of multilayer PeT microchips for dynamic solid phase extraction (dSPE) and PCR amplification. With the former, we found that (i) more than 65% of DNA from 0.6 mu L of blood was recovered, (ii) the resultant DNA was concentrated to greater than 3 ng/mu L., (which was better than other chip-based extraction methods), and (iii) the DNA recovered was compatible with downstream microchip-based PCR amplification. Illustrative of the compatibility of PeT microchips with the PCR process, the successful amplification of a 520 bp fragment of lambda-phage DNA in a conventional thermocycler is shown. The ability to handle the diverse chemistries associated with DNA purification and extraction is a testimony to the potential utility of PeT microchips beyond separations and presents a promising new disposable platform for genetic analysis that is low cost and easy to fabricate.

Comparison of the analytical performance of electrophoresis microchannels fabricated in PDMS, glass, and polyester-toner

This paper compares the analytical performance of microchannels fabricated in PDMS, glass, and polyester-toner for electrophoretic separations. Glass and PDMS chips were fabricated using well-established photolithographic and replica-molding procedures, respectively. PDMS channels were sealed against three different types of materials: native PDMS, plasma-oxidized PDMS, and glass. Polyester-toner chips were micromachined by a direct-printing process using an office laser printer. All microchannels were fabricated with similar dimensions according to the limitations of the direct-printing process (width/depth 150 mu m/12 mu m). LIF was employed for detection to rule out any losses in separation efficiency due to the detector configuration. Two fluorescent dyes, coumarin and fluorescein, were used as model analytes. Devices were evaluated for the following parameters related to electrophoretic separations: EOF, heat dissipation, injection reproducibility, separation efficiency, and adsorption to channel wall.

Members of the Stripping Class in the Lithography Department

In this photo, members of the Stripping Class in the Lithography Department of the New York Trade School are shown at work. Original caption reads, "Members of the Stripping Class. Equipment loaned by the United States Printing & Litho. Company and Local #1." Black and white photograph.

The stability of AM and FM screenings in different water conditions – with the mottle under consideration

This project was performed at Rochester Institute of Technology to get more understanding and knowledge about AM and FM screenings similarities and differences with considerations of the mottle. By designing a test form conformed to the specific measurements and printing it on Heidelberg's Sunday 2000 press, the project group has evaluated the questions that already existed and the ones that occurred during the project. Hence the first press run left some unexpected phenomenon therefore another press run was performed. Measurements were performed and graphs produced in Excel. The project group evaluated the results and from that able to establish facts and draw conclusions. It has been a great experience for the project group and they have learnt a lot.