Agronomic and chemical characteristics of hybrid corn to ensiling

Our aim was to evaluate agronomic and chemical characteristics of corn hybrids to ensiling. It were evaluated nine corn hybrids (MX 300, RB 9308, 2B655, XB 6012, GNZ 2500, PL6890, PRE 32D10, PRE 22T10 e AG 1051), with three replicates. The higher fresh matter yield were observed in the hybrids PL6890 and PRE 32D10, while the dry matter yield was observed in the hybrid PRE 32D10 (13.43 t ha(-1)). The hybrids PRE 32D10 and PRE 22T10 stood out to present higher percent of leaf in relation to whole plant, while the lower percent of stems was found in the hybrids MX 300, 2B655 and XB 6012, however the higher leaves: stems relation was found in XB 6012 (0.49). There was higher CP content in the hybrid PRE 32D10 (9.10% of DM), while the lower NDF (57.78% of DM) and cellulose content (24.27% of DM) were observed in the hybrid GNZ 2500. The hybrid PL6890 presented higher ADF and lignin contents, the others hybrids had values lower. The lower NDIN content was observed in the hybrid RB 9308, while the lower AIDN content occurred on the hybrid 2B655. The lower buffer capacity was observed in the hybrid 2B655 (0.29). There are some differences on chemical composition among the corn hybrids used in this study, however, it is recommended to use the hybrids MX 300, PL6890 and PRE 32D10 for showing higher dry matter yield, which may reflect in the amortization of silage production costs.

Development of Cutaneous Bioadhesive Ureasil-Polyether Hybrid Films

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Degradabilidade e digestibilidade de híbridos de milho em função do estádio de colheita, tamanho de partícula e processamento por meio do esmagamento na ensilagem

During the process of silage corn, should take into consideration some aspects that will result in better utilization. The aim of this study was to evaluate the degradability of dry matter (DM), crude protein (CP), neutral detergent fiber (NDF) and starch digestibility and in vitro dry matter (DM) of silage corn hybrids due two textures, three stages of harvest, three particle sizes and processing by crushing. After harvesting and chipping, part of the material was crushed and then ensiled and sealed for 45 days. After opening the silos, analyzed the degradability in the incubation time of 20 hours using the technique in situ macro bag. The experimental design was a randomized split plot. The DM degradability was influenced only by the effect of stages of sampling used. The degradability of CP showed interaction between processing and particle size (Tp), noting that increased degradation due to processing. For NDF degradation significant interaction of factors, hybrid and processing, similar to the degradation of starch. The IVDMD was influenced by the effects of hybrid, stadium, Tp and processing. It can be concluded that benefits were higher with the use of processing associated with more advanced stages of harvest, in larger particle sizes.

Estimativas dos parâmetros genéticos para seleção de árvores de Eucalyptus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Genetic identification of interspecific hybrid of Neotropical catfish species (Pseudoplatystoma corruscans vs. Pseudoplatystoma reticulatum) in rivers of Mato Grosso do Sul State, Brazil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Correlation and path analysis as an indirect selection criterion for sunflower achene productivity

The study was conducted in two different locations in South Brazil, in tillage in the 2009/2010 season on eight sunflower hybrids, aiming to determine the path correlations and coefficients between primary and secondary characters on the main variable of achene productivity. The correlations were similar between environments. The characters of the head diameter and mass of a thousand achenes had a significant influence on sunflower productivity. Based on the magnitude of the direct and indirect effects, we highlighted all primary components on the main variable, beside the good determination coefficient and low residual effect. The secondary component, the number of achenes, despite the significant direct effect on productivity, was indirectly influenced by the primary components, making it an undesirable character for selection.

Pulsing With Low Concentration Gibberellin Plus Benzyladenine or Commercial Floral Preservatives Affect Postharvest Longevity, Quality, and Leaf Chlorosis of Cut Lilies and Gladioli

Effects of pulsing with different concentrations of gibberellin plus benzyladenine (GA(4+7) + BA), a proprietary mixture of GA(4+7) plus BA in a commercial floral preservative (GA(4+7) + BA + preservative), or a propriety mixture of sugar plus acidifier developed for bulbous flowers (floral bulb preservative) were studied on postharvest performance and quality of cut lily (Lilium hybrids) and gladiolus ( Gladiolus hybrids) flowers. Pulsing of cut stems of lily with GA(4+7) + BA at 5 or 2 mL.L-1 GA(4+7) + BA + preservative for 20 hours at 3 +/- 1 degrees C extended the vase life and controlled leaf chlorosis of 'Cobra'oriental lily and 'Cappuccino'and Pot Corn'asiatic lily. Cut 'Orange Art'asiatic lily performed best when pulsed with GA(4+7) + BA at 10 mg.L-1. For cut gladiolus, pulsing with GA(4+7) + BA at 10 mg.L-1 extended the vase life of 'Alice', 'Mammoth', and 'Passion', while 'Scarlet'had the longest vase life when pulsed with 5 mg.L-1 GA(4+7) + BA. GA(4+7) + BA + preservative also extended the vase life and controlled leaf chlorosis, but the floral bulb preservative had no effect on vase life extension or preventing leaf chlorosis of lilies. Gladiolus cultivars had no or minor leaf chlorosis during vase period. Overall, overnight pulsing with GA(4+7) + BA + or GA(4+7) + BA + preservative extended the vase life and prevented leaf chlorosis

Moulting behavior in leaf-frogs of the genus phyllomedusa (Anura : hylidae)

The species belonging to the subfamily Phyllomedusinae presents physiological and behavioral adaptations to economise water such as secretion of lipids coupled with its spreading onto the skin surface through a complex behavior, adoption of diurnal torpor and secretion of uric acid. Here we describe other adaptation probably involved with water economy, registered in Phyllomedusa distincta, P. tarsius, P. tetraploidea and natural hybrids of P. distincta and P. tetraploidea - at dusk, these amphibians perform an elaborate moulting behavior that encompasses the cleaning of the body with the limbs plus gaping and body contractions. Our data show the daily moulting in P. distincta and suggest that the same mechanism occurs for the other species studied. We suppose that daily moulting improves the skin permeability to water being a characteristic of the phyllomedusines which spread lipids onto the skin surface.

Repetitive DNA sequences and evolution of ZZ/ZW sex chromosomes in characidium (teleostei: characiformes)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Materiais híbridos de sílica/orgânico dopados com rodamina-B: estudo da luminescência e preparação de filmes finos para aplicações em fotônica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Capacidade de combinação para seleção de genótipos de milho

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Filmes híbridos PMMA-siloxano modificados com nanotubos de carbono para proteção de materiais metálicos contra corrosão

Using the sol-gel process, organic-inorganic hybrid coatings were synthesized by incorporation of different concentrations of functionalized carbon nanotubes, to improve their mechanical strength and thermal resistance without changing its passivation character. The siloxane-PMMA hybrids were prepared by radical polymerization of methyl methacrylate (MMA) with 3-methacryloxipropiltrimethoxisilane (MPTS) using the thermal initiator benzoyl peroxide (BPO), followed by acid catalyzed hydrolysis and condensation of tetraethoxysilane (TEOS). The analysis of pristine and functionalized carbon nanotubes was carried out using Scanning Electron Microscopy, X-ray Photoelectron Spectroscopy and Raman Spectroscopy. Structural analysis of hybrids was performed by Nuclear Magnetic Resonance, Atomic Force Microscopy and Raman Spectroscopy. For analysis of mechanical strength and thermal stability were performed mechanical compression tests and thermogravimetric analysis, respectively. Electrochemical Impedance Spectroscopy was used to evaluate the corrosion resistance in saline environment. The results showed an effective functionalization of carbon nanotubes with carboxyl groups and conservation of its structure. The hybrids showed high siloxane network connectivity and roughness of approximately 0.3 nm. The incorporation of carbon nanotubes in the hybrid matrix did not change significantly their thermal stability. Samples containing carbon nanotubes exhibit good corrosion resistance (on the order of MΩ in saline environment), but the lack of complete dispersion of carbon nanotubes in the hybrid, resulted in a loss of mechanical and corrosion resistance compared to hybrid matrix.

Preparação e caracterização de novos híbridos orgânicos-inorgânicos baseados em carboximetilcelulose/polifosfato de sódio dopados com 'Eu'Cl IND.3

Organic- inorganic hybrid (HOI) are materials prepared with the combination of inorganic and organic components. The properties of a hybrid material are unique, not being the sum of each individual component added. This occurs because there is a synergism that depends of the chemical nature of organic and inorganic components, of the size and morphology of their domains. The sodium carboxymethylcellulose (CMC) it's an anionic polymer obtained of the cellulose, very soluble in water in which forms both solutions themselves and gels. The sodium polyphosphate (NaPO3)n, known commercially as Graham Salt is the only polyphosphate soluble in water, and it's the polyphosphate with the longest chain. At the present work it was prepared and characterized new phosphate organic- inorganic hybrids films of carboxymethylcellulose / sodium phosphate and luminescent films of CMC/NaPO3 doped with europium chloride (EuCl3). The films where prepared in several proportions. At first, it was set the amount of water to be used and the amount of carboxymethylcellulose, changing the concentrations of sodium polyphosphate and europium chloride. After pre-establishing concentrations, for each film, the components were submitted to constant agitation and subsequent drying. The inorganic-organic hybrid films were characterized by, TG, DR-X, DMA, FT-IR, UV-Vis-NIR, RMN 31P e 13C and at last, a study of luminescence was made. The hybrid films obtained are transparent and macroscopically homogeneous, however, the MET measures showed the formation of micro-islands of polyphosphate along the material, this fact indicates a bigger fragmentation of the films and this is verified by DMA analysis which shows a smaller resistance of the film with the increase of the concentration of phosphate. Both spectrum FT-IR and RMN analysis of the films, don't show the formation of new bands of their precursors, CMC e NaPO3,....

Interação entre Sorgo Sacarino e plantas daninhas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Preparação e caracterização óptica de filmes de ORMOSIL obtidos via processo sol-gel dopados com azocorantes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)