Application of a building cost estimation model to the appraisal of the churches damaged by earthquakes in Lorca (Spain)

The objective of this paper is the development of a building cost estimation model whose purpose is to quickly and precisely evaluate rebuilding costs for historic heritage buildings affected by catastrophic events. Specifically, this study will be applied to the monumental buildings owned by the Catholic Church that were affected by two earthquakes on May 11, 2011 in the town of Lorca. To estimate the initial total replacement cost new, calculation model will be applied which, on the one hand, will use two-dimensional metric exterior parameters and, on the other, three-dimensional interior cubic parameters. Based on the total of the analyzed buildings, and considering damage caused by the seismic event, the final reconstruction cost for the building units ruined by the earthquakes can be estimated. The proposed calculation model can also be applied to other emergency scenarios and situations for the quick estimation of construction costs necessary for rebuilding historic heritage buildings which have been affected by catastrophic events that deteriorate or ruin their structural or constructive configuration.

First steps of Roman Cement in Spain

Natural cement was patented in 1796 but it didn’t arrive in Spain until 1835. No one knows exactly where the production started in Spain, because it emerged independently at the same time in many places. Most of these outbreaks are concentrated in the north and northwest of Spain: Basque Country (Zumaya and Rezola) and Catalonia (San Celoní and San Juan de las Abadesas).Natural cement was extensively used to decorate historical buildings during the nineteenth and beginning of twentieth century in Madrid. It was the building material which realised the architects and builders dreams of mass-produced cast elements in a wide variety of styles. Its arrival replaced traditional materials that were used previously (lime, gypsum and hydraulic limes). However, its use was not extended in time, and soon it was replaced by the use of artificial Portland cements. During 20th century this building material disappeared from use. What remains is it’s memory, in thousands and thousands of “stone witnesses” in our cities. Final properties of the cement largely depend on raw materials used and its combustion temperature. However, it was characterised by an easily implementation on facade masonry, fast-setting (about 15 minutes), good resistance , an agreeable structural consistency and colour.This article aims to show first steps, evolution and decay of Natural Cement Industry in Spain and its application in Madrid.

Performance of buildings with masonry infill walls during the 2011 Lorca earthquake

On Wednesday 11th May 2011 at 6:47 pm (local time) a magnitude 5.1 Mw earthquake occurred 6 km northeast of Lorca with a depth of around 5 km. As a consequence of the shallow depth and the small epicentral distance, important damage was produced in several masonry constructions and even led to the collapse of one of them. Pieces of the facades of several buildings fell down onto the sidewalk, being one of the reasons for the killing of a total of 9 people. The objective of this paper is to describe and analyze the failure patterns observed in reinforced concrete frame buildings with masonry infill walls ranging from 3 to 8 floors in height. Structural as well as non-structural masonry walls suffered important damage that led to redistributions of forces causing in some cases the failure of columns. The importance of the interaction between the structural frames and the infill panels is analyzed by means of non-linear Finite Element Models. The resulting load levels are compared with the member capacities and the changes of the mechanical properties during the seismic event are described and discussed. In the light of the results obtained the observed failure patterns are explained. Some comments are stated concerning the adequacy of the numerical models that are usually used during the design phase for the seismic analysis.

Space structures for sports buildings: Tien T. Lan and Yuan Zhilian (eds). Elsevier Applied Science Publishers, The Netherlands, 1987

This book review states that parts of this interesting volume may prove useful as a reference for designers and researchers in the field, though it lacks somewhat in unity and various important topics are not covered.

Assessment of expected damage on buildings subjected to Lorca earthquake through an energy-based seismic index method and nonlinear dynamic response analyses

The city of Lorca (Spain) was hit on May 11th, 2011, by two consecutive earth-quakes of magnitudes 4.6 and 5.2 Mw, causing casualties and important damage in buildings. Many of the damaged structures were reinforced concrete frames with wide beams. This study quantifies the expected level of damage on this structural type in the case of the Lorca earth-quake by means of a seismic index Iv that compares the energy input by the earthquake with the energy absorption/dissipation capacity of the structure. The prototype frames investigated represent structures designed in two time periods (1994–2002 and 2003–2008), in which the applicable codes were different. The influence of the masonry infill walls and the proneness of the frames to concentrate damage in a given story were further investigated through nonlinear dynamic response analyses. It is found that (1) the seismic index method predicts levels of damage that range from moderate/severe to complete collapse; this prediction is consistent with the observed damage; (2) the presence of masonry infill walls makes the structure very prone to damage concentration and reduces the overall seismic capacity of the building; and (3) a proper hierarchy of strength between beams and columns that guarantees the formation of a strong column-weak beam mechanism (as prescribed by seismic codes), as well as the adoption of counter-measures to avoid the negative interaction between non-structural infill walls and the main frame, would have reduced the level of damage from Iv=1 (collapse) to about Iv=0.5 (moderate/severe damage)

Determination of the influence of specific building regulations in smart buildings

The automation of domestic services began to be implemented in buildings since the late nineteenth century, and today we are used to terms like ‘intelligent buildings’, ‘digital home’ or ‘domotic buildings’. These concepts tell us about constructions which integrate new technologies in order to improve comfort, optimize energy consumption or enhance the security of users. In conjunction, building regulations have been updated to suit the needs of society and to regulate these new facilities in such structures. However, we are not always sure about how far, from the quantitative or qualitative point of view, legislation should regulate certain aspects of the building activity. Consequently, content analysis is adopted in this research to determine the influence of building regulations in the implementation of new technologies in the construction process. This study includes the analysis of different European regulations, the collection and documentation of such guidelines that have been established and a study of the impact that all of these have had in the way we start thinking an architectural project. The achievements of the research could be explained in terms of the regulatory requirements that must be taken into account in order to achieve a successful implementation of a home automation system, and the key finding has been the confirmation of how the design of smart buildings may be promoted through specific regulatory requirements while other factors, such as the global economic situation, do not seem to affect directly the rate of penetration of home automation in construction.

Paisajes de la sal en Andalucía

Los paisajes protagonistas de esta investigación han sido creados gracias a la actividad de las salinas, explotaciones “donde se beneficia la sal de las aguas del mar o de ciertos manantiales, cuando se ha evaporado el agua.” (RAE). Son lugares de características únicas, tanto por sus valores naturales y medioambientales, como por los valores culturales, patrimoniales, históricos, sociales e identitarios, “resultado de la acción e interacción de factores naturales y humanos en el territorio” (CEP, 2000). Existen salinas en muchos lugares del mundo, pero es en la Península Ibérica donde se encuentra la mayor concentración de estas explotaciones en toda Europa y, por consiguiente, de los singulares paisajes asociados y generados por ellas. Es también la única región europea donde existen salinas de interior que utilizan métodos de evaporación para la obtención de sal: las energías y circunstancias naturales aprovechadas en ellas, sol, viento, gravedad y humedad relativa, propician la evaporación del agua salada, una de las estrategias fundamentales para su funcionamiento. Esta circunstancia determina su posición geográfica en el territorio y su dependencia de los ciclos climáticos estacionales, del régimen hidrológico, la estructura geológica del subsuelo, la geomorfología y la acción humana para potenciar la eficiencia de los procesos productivos, creando para ello un extenso e interesante patrimonio natural y cultural en torno a ellas. Por tanto, son también paisajes culturales, resultado de un proceso artesanal de producción y comercialización de la sal, que se articula a través de la construcción de una serie de instalaciones preindustriales diseminadas y conectadas en puntos estratégicos del territorio costero e interior. La presente tesis aborda la grave situación a la que se enfrentan en la actualidad los paisajes ibéricos de la sal, concretamente los ubicados en la Comunidad Autónoma de Andalucía, que están sufriendo un ávido proceso de abandono y desaparición desde mediados del s. XX, con la consiguiente pérdida para la sociedad de este valioso patrimonio cultural y natural, que se ha ido construyendo durante siglos, prácticamente desde el inicio de la humanidad. De las diversas tipologías de salinas que existen, se han seleccionado las explotaciones, tanto marítimas como de interior, que utilizan o han utilizado en su origen técnicas de explotación artesanal basadas en la evaporación. El interés de esta acotación tipológica se ha basado en las relaciones de dependencia que estas explotaciones de sal establecen con el entorno físico y climático donde se ubican para poder existir y funcionar. El objetivo principal de esta investigación ha perseguido el establecimiento y definición de un marco territorial, global e integrador, para los paisajes culturales salineros andaluces, a través de la observación directa realizada durante el trabajo de campo, el análisis de textos, imágenes, documentos, gráficos, palabras y entrevistas abiertas. Lo anterior ha permitido identificar, clasificar, analizar y valorar sus principales características y su evolución en el tiempo, identificando las causas del deterioro y desaparición del patrimonio salinero, evaluando la efectividad de las iniciativas, públicas y/o privadas, y de las figuras de protección, así como analizar las relaciones que establecen con su entorno próximo, con los núcleos de población y habitantes a los que sirven, la red de carreteas y caminos que las conectan y los ríos y mares que las proveen de materia prima. Finalmente, se ha establecido una sistemática integral de análisis, con el fin de poder actuar, a partir del conocimiento, a favor de la gestión, salvaguarda y pervivencia de los excepcionales valores culturales y naturales, que definen el carácter e identidad de estos singulares paisajes. ----------------------ABSTRACT----------------- The landscapes of this research have been created by the activity of saltworks, sites “where salt from sea water or certain springs is obtained, when water evaporates.” (RAE). They are places with unique characteristics, because of their natural and environmental values, as well as their cultural, historic and social values, their heritage and identity, “the result of the action and interaction of natural and human factors on the territory” (European Landscape Convention, 2000). There are many saltworks in many places around the world, but it is in the Iberian Peninsula where we find the highest concentration of salt industries within Europe and, therefore, the particular landscapes associated and created by them. It is as well the only European region where we can find inland saltworks with evaporation methods to obtain salt: the energies and natural circumstances used in them are sun, wind, gravity and relative humidity, favouring salt water evaporation, one of the main strategies of their functioning. This circumstance determines their geographic position in the territory and its dependence on seasonal climatic cycles, hydrological regimes, geological subsoil structure, geomorphology and human action to strengthen productive processes efficiency, creating an extensive and interesting natural and cultural heritage around them. Therefore, they are also cultural landscapes, result of a traditional salt production process and marketing, organized through the construction of certain preindustrial buildings scattered and connected in strategic inland and seaside spots. This thesis deals with the plight today’s salt landscapes are facing, particularly those within the Andalucian Region, since the middle of the 20th century undergoing an avid process of abandonment and disappearance, meaning a great loss for society of a cultural and natural heritage constructed along centuries, almost since the beginning of mankind. Among the diverse typologies of saltworks, the selection made consists on those inland and seaside ones, which use or have originally used traditional production techniques based on evaporation. The interest in this particular saltwork typology is based on the dependency relationships these industries establish with the environment and climate where they are located, in order to be able to exist and function. The main goal of this research has pursued to establish and define a global and inclusive territorial framework for Andalucian cultural saltworks landscapes, through direct observation carried out during fieldwork, analysis of texts, images, documents, graphs, words and open interviews. All of it has allowed to identify, classify, analyze and evaluate their main characteristics and evolution over time, identifying the causes of deterioration and disappearance of the saltworks heritage, assessing the effectiveness of public and private initiatives, and protection projects, as well as analyzing the relationships with their surroundings, population centers and residents they serve, road networks connecting them and rivers and seas supplying the raw material. Finally, a comprehensive analysis systematic has been established, in order to be able to take action, with knowledge as starting point, for the management, preservation and survival of the unique cultural and natural values that define the character and identity of these singular landscapes.

Energy and Lighting Performance of Buildings in the Neighbourhood Ciudad de los Angeles, Before and After Refurbishing.

The Spanish Ministry of Economy and Competitiveness is funding the SHERIF Research Project, which falls under the INNPACTO pr ogram. This project aims to increase the rate of the existing building refurbishment fro m the energy efficiency point of view by designing a facade system that must be an economica l, flexible and integrated solution 1 . Under this project has been performing several task s regarding the constructive characterization and energy evaluation of the therm al behaviour of facades on existing buildings . In order to perform the latter task, in which this article will focus, has been developing a survey of various buildings in the nei ghbourhood Ciudad de los Angeles, which has as main objective the comparison between the ac tual energy and light behaviour of different buildings, prior and posterior to any ref urbishment works have been undertaken. The evaluation of the actual performance of buildin gs before and after being refurbished is aimed to determine the impact of the work developed as well as learn from the work performed for future interventions.

Designer-driven 3D buildings generated using variable neighborhood search

This paper presents a mechanism to generate virtual buildings considering designer constraints and guidelines. This mechanism is implemented as a pipeline of different Variable Neighborhood Search (VNS) optimization processes in which several subproblems are tackled (1) rooms locations, (2) connectivity graph, and (3) element placement. The core VNS algorithm includes some variants to improve its performance, such as, for example constraint handling and biased operator selection. The optimization process uses a toolkit of construction primitives implemented as "smart objects" providing basic elements such as rooms, doors, staircases and other connectors. The paper also shows experimental results of the application of different designer constraints to a wide range of buildings from small houses to a large castle with several underground levels.

Modal analysis of buildings : quantification of uncertainties and model updating

Una estructura vibra con la suma de sus infinitos modos de vibración, definidos por sus parámetros modales (frecuencias naturales, formas modales y coeficientes de amortiguamiento). Estos parámetros se pueden identificar a través del Análisis Modal Operacional (OMA). Así, un equipo de investigación de la Universidad Politécnica de Madrid ha identificado las propiedades modales de un edificio de hormigón armado en Madrid con el método Identificación de los sub-espacios estocásticos (SSI). Para completar el estudio dinámico de este edificio, se ha desarrollado un modelo de elementos finitos (FE) de este edificio de 19 plantas. Este modelo se ha calibrado a partir de su comportamiento dinámico obtenido experimentalmente a través del OMA. Los objetivos de esta tesis son; (i) identificar la estructura con varios métodos de SSI y el uso de diferentes ventanas de tiempo de tal manera que se cuantifican incertidumbres de los parámetros modales debidos al proceso de estimación, (ii) desarrollar FEM de este edificio y calibrar este modelo a partir de su comportamiento dinámico, y (iii) valorar la bondad del modelo. Los parámetros modales utilizados en esta calibración han sido; espesor de las losas, densidades de los materiales, módulos de elasticidad, dimensiones de las columnas y las condiciones de contorno de la cimentación. Se ha visto que el modelo actualizado representa el comportamiento dinámico de la estructura con una buena precisión. Por lo tanto, este modelo puede utilizarse dentro de un sistema de monitorización estructural (SHM) y para la detección de daños. En el futuro, podrá estudiar la influencia de los agentes medioambientales, tales como la temperatura o el viento, en los parámetros modales. A structure vibrates according to the sum of its vibration modes, defined by their modal parameters (natural frequencies, damping ratios and modal shapes). These parameters can be identified through Operational Modal Analysis (OMA). Thus, a research team of the Technical University of Madrid has identified the modal properties of a reinforced-concrete-frame building in Madrid using the Stochastic Subspace Identification (SSI) method and a time domain technique for the OMA. To complete the dynamic study of this building, a finite element model (FE) of this 19-floor building has been developed throughout this thesis. This model has been updated from its dynamic behavior identified by the OMA. The objectives of this thesis are to; (i) identify the structure with several SSI methods and using different time blocks in such a way that uncertainties due to the modal parameter estimation are quantified, (ii) develop a FEM of this building and tune this model from its dynamic behavior, and (iii) Assess the quality of the model, the modal parameters used in this updating process have been; thickness of slabs, material densities, modulus of elasticity, column dimensions and foundation boundary conditions. It has been shown that the final updated model represents the structure with a very good accuracy. Thus, this model might be used within a structural health monitoring framework (SHM). The study of the influence of changing environmental factors (such as temperature or wind) on the model parameters might be considered as a future work.

Paisajes de la sal en Andalucía

Los paisajes protagonistas de esta investigación han sido creados gracias a la actividad de las salinas, explotaciones “donde se beneficia la sal de las aguas del mar o de ciertos manantiales, cuando se ha evaporado el agua.” (RAE). Son lugares de características únicas, tanto por sus valores naturales y medioambientales, como por los valores culturales, patrimoniales, históricos, sociales e identitarios, “resultado de la acción e interacción de factores naturales y humanos en el territorio” (CEP, 2000). Existen salinas en muchos lugares del mundo, pero es en la Península Ibérica donde se encuentra la mayor concentración de estas explotaciones en toda Europa y, por consiguiente, de los singulares paisajes asociados y generados por ellas. Es también la única región europea donde existen salinas de interior que utilizan métodos de evaporación para la obtención de sal: las energías y circunstancias naturales aprovechadas en ellas, sol, viento, gravedad y humedad relativa, propician la evaporación del agua salada, una de las estrategias fundamentales para su funcionamiento. Esta circunstancia determina su posición geográfica en el territorio y su dependencia de los ciclos climáticos estacionales, del régimen hidrológico, la estructura geológica del subsuelo, la geomorfología y la acción humana para potenciar la eficiencia de los procesos productivos, creando para ello un extenso e interesante patrimonio natural y cultural en torno a ellas. Por tanto, son también paisajes culturales, resultado de un proceso artesanal de producción y comercialización de la sal, que se articula a través de la construcción de una serie de instalaciones preindustriales diseminadas y conectadas en puntos estratégicos del territorio costero e interior. La presente tesis aborda la grave situación a la que se enfrentan en la actualidad los paisajes ibéricos de la sal, concretamente los ubicados en la Comunidad Autónoma de Andalucía, que están sufriendo un ávido proceso de abandono y desaparición desde mediados del s. XX, con la consiguiente pérdida para la sociedad de este valioso patrimonio cultural y natural, que se ha ido construyendo durante siglos, prácticamente desde el inicio de la humanidad. De las diversas tipologías de salinas que existen, se han seleccionado las explotaciones, tanto marítimas como de interior, que utilizan o han utilizado en su origen técnicas de explotación artesanal basadas en la evaporación. El interés de esta acotación tipológica se ha basado en las relaciones de dependencia que estas explotaciones de sal establecen con el entorno físico y climático donde se ubican para poder existir y funcionar. El objetivo principal de esta investigación ha perseguido el establecimiento y definición de un marco territorial, global e integrador, para los paisajes culturales salineros andaluces, a través de la observación directa realizada durante el trabajo de campo, el análisis de textos, imágenes, documentos, gráficos, palabras y entrevistas abiertas. Lo anterior ha permitido identificar, clasificar, analizar y valorar sus principales características y su evolución en el tiempo, identificando las causas del deterioro y desaparición del patrimonio salinero, evaluando la efectividad de las iniciativas, públicas y/o privadas, y de las figuras de protección, así como analizar las relaciones que establecen con su entorno próximo, con los núcleos de población y habitantes a los que sirven, la red de carreteas y caminos que las conectan y los ríos y mares que las proveen de materia prima. Finalmente, se ha establecido una sistemática integral de análisis, con el fin de poder actuar, a partir del conocimiento, a favor de la gestión, salvaguarda y pervivencia de los excepcionales valores culturales y naturales, que definen el carácter e identidad de estos singulares paisajes. ----------------------ABSTRACT----------------- The landscapes of this research have been created by the activity of saltworks, sites “where salt from sea water or certain springs is obtained, when water evaporates.” (RAE). They are places with unique characteristics, because of their natural and environmental values, as well as their cultural, historic and social values, their heritage and identity, “the result of the action and interaction of natural and human factors on the territory” (European Landscape Convention, 2000). There are many saltworks in many places around the world, but it is in the Iberian Peninsula where we find the highest concentration of salt industries within Europe and, therefore, the particular landscapes associated and created by them. It is as well the only European region where we can find inland saltworks with evaporation methods to obtain salt: the energies and natural circumstances used in them are sun, wind, gravity and relative humidity, favouring salt water evaporation, one of the main strategies of their functioning. This circumstance determines their geographic position in the territory and its dependence on seasonal climatic cycles, hydrological regimes, geological subsoil structure, geomorphology and human action to strengthen productive processes efficiency, creating an extensive and interesting natural and cultural heritage around them. Therefore, they are also cultural landscapes, result of a traditional salt production process and marketing, organized through the construction of certain preindustrial buildings scattered and connected in strategic inland and seaside spots. This thesis deals with the plight today’s salt landscapes are facing, particularly those within the Andalucian Region, since the middle of the 20th century undergoing an avid process of abandonment and disappearance, meaning a great loss for society of a cultural and natural heritage constructed along centuries, almost since the beginning of mankind. Among the diverse typologies of saltworks, the selection made consists on those inland and seaside ones, which use or have originally used traditional production techniques based on evaporation. The interest in this particular saltwork typology is based on the dependency relationships these industries establish with the environment and climate where they are located, in order to be able to exist and function. The main goal of this research has pursued to establish and define a global and inclusive territorial framework for Andalucian cultural saltworks landscapes, through direct observation carried out during fieldwork, analysis of texts, images, documents, graphs, words and open interviews. All of it has allowed to identify, classify, analyze and evaluate their main characteristics and evolution over time, identifying the causes of deterioration and disappearance of the saltworks heritage, assessing the effectiveness of public and private initiatives, and protection projects, as well as analyzing the relationships with their surroundings, population centers and residents they serve, road networks connecting them and rivers and seas supplying the raw material. Finally, a comprehensive analysis systematic has been established, in order to be able to take action, with knowledge as starting point, for the management, preservation and survival of the unique cultural and natural values that define the character and identity of these singular landscapes.

Nuevo Modelo de Distribución de Corriente Contínua en Baja Tensión en Smart Buildings

En este trabajo se revisan una serie de conceptos, todos ellos relacionados con las microrredes de baja tensión de tipo de en corriente continua. Se exponen varias de las características propias de estas microrredes, diferentes tipos de cargas que alimentarían la microrred y posibles formas de conectar ésta al suministro. Se realiza un estudio de los niveles de potencia demandada más comunes, así como de las pérdidas en la red y las formas de evitar éstas, y cómo se generaría la corriente de la red de continua. Además, se exponen varios casos de estudios ya operativos sobre el modelo de continua.

Promotion of intangible heritage as a tool to strengthen revitalisation of historic centres: the case of de Monumenta Programme in the City of Porto Alegre (Rio Grande do Sul State) Brazil

The preservation of tangible cultural heritage does not guarantee effective revitalisation of urban historic areas as a whole. The legacy of our history consists not only of paintings, sculptures, architectural monuments and public spaces, but also the safeguarding of immaterial aspects of social life, such as oral traditions, rituals, practices, knowledge and craft skills. From 1999 to 2013, 26 Brazilian cities benefited from the Monumenta Programme - a national cultural policy that involved institutions, the private sector and the local community. The purpose of the programme was to stimulate economic growth and increase cultural and social development of the historic centres. Moreover, it sought to increase the number of residents in the benefited areas as defined in its agenda (IDB, 1999; MinC & Programa Monumenta, 2006). Using the Historic Centre of Porto Alegre as a case study, this paper examines how this cultural programme enables demographic change through the promotion of intangible cultural heritage, e.g. by supporting educational projects. The demographic flow was analysed using the microdata of the Populations Censuses (years 2000 and 2010) available from the Brazilian Institute of Geography and Statistics. The results showed an increase in low-income residents the areas that participated in the programme. This increase may have been motivated by a set of cultural-educational projects under the auspices of the Monumenta Programme. The retraining of artisans of Alfândega Square, the training of low-income youth for restoration work and the implementation of the "Black Route Museum in Porto Alegre" (Bicca, 2010) are just some examples of what was done to improve the local community's economy, to encourage social cohesion and to enhance the awareness of cultural diversity as a positive and essential value in society.

El lenguaje de la estructura: Mies van der Rohe y la construcción con acero y hormigón

John Summerson, en El Lenguaje Clásico de la Arquitectura, defiende que los órdenes clásicos que empleaban los arquitectos romanos para decorar sus edificios, no tienen una función estructural pero hacen expresivos a los edificios. Les hacen hablar. Arthur Schopenhauer afirma que “el destino de la Bella Arquitectura es poner de manifiesto la lucha entre el peso y la rigidez de los elementos estructurales”. Y Auguste Perret define la Arquitectura como “el arte de hacer cantar al punto de apoyo”. El objetivo de esta Tesis Doctoral es profundizar en la capacidad de expresión de la estructura. A través del estudio de las estructuras históricas, que se realiza en la primera parte de la Tesis, podemos concluir que existen tres categorías, tres maneras de expresión de la Estructura. Estructuras Vistas, que hablan, Estructuras Ocultas, que se esconden y Estructuras Ilusorias, que fingen. El Partenón y la Sainte Chapelle de París se estudian en el apartado de Estructuras Vistas. El Panteón, el Palacio de Carlos V, la Catedral de San Pablo en Londres, y otras arquitecturas renacentistas y romanas, en el apartado de Estructuras Ocultas. Y como Estructuras Ilusorias, la Alhambra (Dos Hermanas, Comares, el Patio de los Leones), Santa Sofía, y otras arquitecturas del barroco italiano. En la segunda parte de la Tesis se analiza la obra completa de Mies van der Rohe desde el punto de vista de esas tres categorías. Lo visto, lo oculto y lo ilusorio en las estructuras de Mies. Se estudia la evolución en la estructura de la casa, desde las primeras casas con Estructura Oculta de muro de ladrillo, hasta las últimas casas con Estructura Vista y columnas adelantadas, pasando por una etapa intermedia de casas con estructura mixta de muro de ladrillo en la que el acero comienza a hacer su aparición. Se analizan también seis soluciones estructurales en los Bloques y en las Torres: Estructura Vista reverberante, expresiva o inexpresiva vs Estructura Oculta con vestido horizontal, vestido reticular o vestido vertical. Y por último, se estudian las tres soluciones de Estructura Ilusoria que emplea Mies en sus Pabellones. La metodología de trabajo que se ha empleado se divide en cuatro apartados: El análisis bibliográfico; el análisis in situ de los edificios, que nos permite comprobar, por ejemplo, los efectos lumínicos de la columna acanalada del Partenón, o el efecto reverberante de las columnas de la Weissenhofsiedlung; el análisis crítico de planos y detalles constructivos, que nos lleva a concluir que la disposición de pantallas del Pabellón de Barcelona anula la lectura de la crujía estructural, y que la columna del restaurante Cantor se dispone con su alma perpendicular a la cercha, y no paralela, como cabría suponer si se quisiera aprovechar toda la capacidad portante del perfil en H; y por último, el análisis numérico y estructural, que nos lleva a confirmar el sobredimensionado de la Estructura del Patio de los Leones de la Alhambra o el sobredimensionado de la Estructura de la Casa Farnsworth. Lo que se confirma con esta Tesis Doctoral es que la Estructura es algo más, mucho más, que sólo transmisión de las cargas. ABSTRACT John Summerson, in The Classic Language of Architecture, argues that the classic orders used by Roman architects in the decoration of their buildings did not have a structural function, but made buildings expressive. They make them speak. Arthur Schopenhauer affirms that “the goal of Great Architecture is to highlight the struggle between the gravity and rigidity of structural elements”. And Auguste Perret defines Architecture as “the art of making the points of support sing”. The objective of this Doctoral Thesis is to examine the expressive capacity of structure. Following a study of historic structures in the first part of the thesis, we conclude that three categories exist, three ways of expressing Structure. Visible Structures that speak, Concealed Structures that are hidden and Illusory Structures that pretend. The Parthenon and the Sainte Chapelle in Paris are studied in the section on Visible Structures. The Pantheon, the Palace of Charles V, Saint Paul’s Cathedral in London, and other Renaissance and Roman architectures are dealt with in the Concealed Structures section. And, as examples of Illusory Structures, we focus on the Alhambra (The Hall of the Two Sisters, the Comares and the Court of the Lions), Saint Sophia, and other Italian Baroque architectures. In the second part of the Thesis the complete work of Mies van der Rohe is analysed from the perspective of these three categories. The visible, the concealed and the illusory, in the structures of Mies. We study how the structure of the house evolves, from the first houses with the Hidden Structure of the brick wall, to the later houses with Visible Structures and columns, via an intermediate phase of mixed-structure houses with brick walls, where steel first began to make its appearance. We also analyse six structural solutions in the Blocks and Towers: reverberant, expressive or inexpressive Visible Structure vs Concealed Structure with horizontal cladding, reticular cladding or vertical cladding. And finally, we look at the three Illusory Structure solutions that Mies employs in his Pavilions. The methodology employed is divided into four sections: a bibliographic analysis; an analysis in situ of the buildings, which allows us to test, for example, the lighting effects of the fluted column in the Parthenon, or the reverberant effect of the Weissenhofsiedlung columns; a critical analysis of plans and constructive details, which leads us to conclude that the arrangement of panels in the Barcelona Pavilion cancels out the structural centreline, and that the column in the Cantor restaurant is placed with its web perpendicular to the truss, and not parallel to it, as one might expect if one wanted to avail of all the load-bearing capacity of the H beam; and lastly, a numeric and structural analysis, which confirms the oversizing of the Court of the Lions structure in the Alhambra or the oversized structure of Farnsworth House. All of which confirms in this Doctoral Thesis that structure is something more, much more, than a mere conveyor of loads.