Prevalence of risk factors for undiagnosed obstructive sleep apnoea is high in truck drivers on UK roads

Objectives To determine the prevalence of symptoms and risk factors of obstructive sleep apnoea (OSA) in truck drivers at a UK large truck stop. Methods Over a 5 day period, truck drivers completed a short questionnaire at a major UK ‘truck stop’. The questionnaire asked about OSA rist factors and symptoms, and included the Epworth Sleepiness Scale (ESS). Additionally, measurements of height, weight and collar size were taken. 148 truck drivers participated and within this random group the risk factors of OSA that were looked for were:men age over 40 y, obesity, parge neck circumference, smoking, high ESS and bed partner reporting snoring with witnessed apnoeas. Results Our sample were all men, with 82% aged over 40 y. 47% were obese (compared with 23% for UK men in general) and average neck circumference was 42 cm (compared with 38 cm for UK men in general – Martin et al 1997). 31% smoked (vs 21% for general population), and ESS averaged 2.1 points higher than expected for a healthy population (Johns et al 1997). Snoring was quite evident at 57% (compared wth 40% for men in general) and witnessed apnoeas were almost double (7%) compared with 3.8% given by Ohayon et al (1997) generally for men. Conclusion 8 key symptoms and risk factors of OSA have been found to be prevalent in a sample of truck drivers on UK roads, and to greater extent that for estimates in the general male population. Bed partners of truck drivers reporting witnessed apnoeas strongly suggests this group has a high potential for undiagnosed OSA. OSA sufferers are known to be at high risk of causing road traffi c accidents. This, together with the large size of trucks, then the potential for serious road crashes is great. Truck drivers, especially those who are obese, ought to be a high priority population for OSA screening.

Impact of high PV penetration on distribution transformer insulation life

The reliable operation of distribution systems is critically dependent on detailed understanding of load impacts on distribution transformer insulation systems. This paper estimates the impact of rooftop photovoltaic (PV) generation on a typical 200-kVA, 22/0.415-kV distribution transformer life under different operating conditions. This transformer supplies a suburban area with a high penetration of roof top photovoltaic systems. The transformer loads and the phase distribution of the PV systems are significantly unbalanced. Oil and hot-spot temperature and remnant life of distribution transformer under different PV and balance scenarios are calculated. It is shown that PV can significantly extend the transformer life.

Predicting voltage unbalance impacts of plug-in electric vehicles penetration in residential low-voltage distribution networks

Plug-in electric vehicles will soon be connected to residential distribution networks in high quantities and will add to already overburdened residential feeders. However, as battery technology improves, plug-in electric vehicles will also be able to support networks as small distributed generation units by transferring the energy stored in their battery into the grid. Even though the increase in the plug-in electric vehicle connection is gradual, their connection points and charging/discharging levels are random. Therefore, such single-phase bidirectional power flows can have an adverse effect on the voltage unbalance of a three-phase distribution network. In this article, a voltage unbalance sensitivity analysis based on charging/discharging levels and the connection point of plug-in electric vehicles in a residential low-voltage distribution network is presented. Due to the many uncertainties in plug-in electric vehicle ratings and connection points and the network load, a Monte Carlo-based stochastic analysis is developed to predict voltage unbalance in the network in the presence of plug-in electric vehicles. A failure index is introduced to demonstrate the probability of non-standard voltage unbalance in the network due to plug-in electric vehicles.

Small signal stability analysis of power systems with high penetration of wind power

The integration of large amount of wind power into a power system imposes a new challenge for the secure and economic operation of the system. It is necessary to investigate the impacts of wind power generation on the dynamic behavior of the power system concerned. This paper investigates the impacts of large amount of wind power on small signal stability and the corresponding control strategies to mitigate the negative effects. The concepts of different types of wind turbine generators (WTGs) and the principles of the grid-connected structures of wind power generation systems are first briefly introduced. Then, the state-of-the-art of the studies on the impacts of WTGs on small signal stability as well as potential problems to be studied are clarified. Finally, the control strategies on WTGs to enhance power system damping characteristics are presented.

An analysis of regression models for predicting the speed of a wave glider autonomous surface vehicle

An important aspect of robotic path planning for is ensuring that the vehicle is in the best location to collect the data necessary for the problem at hand. Given that features of interest are dynamic and move with oceanic currents, vehicle speed is an important factor in any planning exercises to ensure vehicles are at the right place at the right time. Here, we examine different Gaussian process models to find a suitable predictive kinematic model that enable the speed of an underactuated, autonomous surface vehicle to be accurately predicted given a set of input environmental parameters.

A high performance feedback active noise control system

In many active noise control (ANC) applications, an online secondary path modelling method that uses a white noise as a training signal is required. This paper proposes a new feedback ANC system. Here we modified both the FxLMS and the VSS-LMS algorithms to raised noise attenuation and modelling accuracy for the overall system. The proposed algorithm stops injection of the white noise at the optimum point and reactivate the injection during the operation, if needed, to maintain performance of the system. Preventing continuous injection of the white noise increases the performance of the proposed method significantly and makes it more desirable for practical ANC systems. Computer simulation results shown in this paper indicate effectiveness of the proposed method.

InsulLiving house post-occupancy energy performance report

This research was commissioned by Metecno Pty Ltd, trading as Bondor®. The InsulLiving house was designed and constructed by Bondor®. The house instrumentation (electricity circuits, indoor environment, weather station) was provided by Bondor and supplied and installed by independent contractors. This report contains analysis of data collected from the InsulLiving house at Burpengary during 1 year of occupancy by a family of four for the period 1 April 2012 – 31 March 2013. The data shows a daily average electricity consumption 48% less than the regional average. The analysis confirms that the 9 star house performed thermally slightly better than the simulated performance. The home was 'near zero energy', with its modest 2.1kW solar power system meeting all of the needs for space heating and cooling, lighting and most water heating.

Assessment of freestanding membranes prepared from Antheraea pernyi silk fibroin as a potential vehicle for corneal epithelial cell transplantation

Freestanding membranes created from Bombyx mori silk fibroin (BMSF) offer a potential vehicle for corneal cell transplantation since they are transparent and support the growth of human corneal epithelial cells (HCE). Fibroin derived from the wild silkworm Antheraea pernyi (APSF) might provide a superior material by virtue of containing putative cell- attachment sites that are absent from BMSF. Thus we have investigated the feasibility of producing transparent, freestanding membranes from APSF and have analysed the behaviour of HCE cells on this material. No significant differences in cell numbers or phenotype were observed in short term HCE cell cultures established on either fibroin. Production of transparent freestanding APSF membranes, however, proved to be problematic as cast solutions of APSF were more prone to becoming opaque, displayed significantly lower permeability and were more brittle than BMSF-membranes. Cultures of HCE cells established on either membrane developed a normal stratified morphology with cytokeratin pair 3/12 being immuno-localized to the superficial layers. We conclude that while it is feasible to produce transparent freestanding membranes from APSF, the technical difficulties associated with this biomaterial, along with an absence of enhanced cell growth, currently favours the continued development of BMSF as a preferred vehicle for corneal cell transplantation. Nevertheless, it remains possible that refinement of techniques for processing APSF might yet lead to improvements in the handling properties and performance of this material.

Modelling as a vehicle for philosophical inquiry in the mathematics curriculum

Philosophical inquiry in the teaching and learning of mathematics has received continued, albeit limited, attention over many years (e.g., Daniel, 2000; English, 1994; Lafortune, Daniel, Fallascio, & Schleider, 2000; Kennedy, 2012a). The rich contributions these communities can offer school mathematics, however, have not received the deserved recognition, especially from the mathematics education community. This is a perplexing situation given the close relationship between the two disciplines and their shared values for empowering students to solve a range of challenging problems, often unanticipated, and often requiring broadened reasoning. In this article, I first present my understanding of philosophical inquiry as it pertains to the mathematics classroom, taking into consideration the significant work that has been undertaken on socio-political contexts in mathematics education (e.g., Skovsmose & Greer, 2012). I then consider one approach to advancing philosophical inquiry in the mathematics classroom, namely, through modelling activities that require interpretation, questioning, and multiple approaches to solution. The design of these problem activities, set within life-based contexts, provides an ideal vehicle for stimulating philosophical inquiry.

Optimisation of lateral load-resisting systems in composite high-rise buildings

This research is carried out by using finite element modelling of building prototypes with three different layouts (rectangular, octagonal and L-shaped) for three different heights (98.0 m, 147.0 m and 199.5 m) for the optimization of lateral load-resisting systems in composite high-rise buildings. Variations of lateral bracings (different number and varied placement along model height of belt-truss and outrigger floors) with RCC (reinforced cement concrete) core wall are used in composite high-rise building models. Prototypes of composite buildings are analysed for dynamic wind and seismic loads. The effects on serviceability (deflection and frequency) of models are studied and conclusions are deduced.

High dietary diversity is associated with obesity in Sri Lankan adults : an evaluation of three dietary scores

Background Dietary diversity is recognized as a key element of a high quality diet. However, diets that offer a greater variety of energy-dense foods could increase food intake and body weight. The aim of this study was to explore association of diet diversity with obesity in Sri Lankan adults. Methods Six hundred adults aged > 18 years were randomly selected by using multi-stage stratified sample. Dietary intake assessment was undertaken by a 24 hour dietary recall. Three dietary scores, Dietary Diversity Score (DDS), Dietary Diversity Score with Portions (DDSP) and Food Variety Score (FVS) were calculated. Body mass index (BMI) ≥ 25 kg.m-2 is defined as obese and Asian waist circumference cut-offs were used diagnosed abdominal obesity. Results Mean of DDS for men and women were 6.23 and 6.50 (p=0.06), while DDSP was 3.26 and 3.17 respectively (p=0.24). FVS values were significantly different between men and women 9.55 and 10.24 (p=0.002). Dietary diversity among Sri Lankan adults was significantly associated with gender, residency, ethnicity, education level but not with diabetes status. As dietary scores increased, the percentage consumption was increased in most of food groups except starches. Obese and abdominal obese adults had the highest DDS compared to non obese groups (p<0.05). With increased dietary diversity the level of BMI, waist circumference and energy consumption was significantly increased in this population. Conclusion Our data suggests that dietary diversity is positively associated with several socio-demographic characteristics and obesity among Sri Lankan adults. Although high dietary diversity is widely recommended, public health messages should emphasize to improve dietary diversity in selective food items.

ZnO nanocones with high-index {101̅1} facets for enhanced energy conversion efficiency of dye-sensitized solar cells

ZnO is a promising photoanode material for dye-sensitized solar cells (DSCs) due to its high bulk electron mobility and because different geometrical structures can easily be tailored. Although various strategies have been taken to improve ZnO-based DSC efficiencies, their performances are still far lower than TiO2 counterparts, mainly because low conductivity Zn2+–dye complexes form on the ZnO surfaces. Here, cone-shaped ZnO nanocrystals with exposed reactive O-terminated {101̅1} facets were synthesized and applied in DSC devices. The devices were compared with DSCs made from more commonly used rod-shaped ZnO nanocrystals where {101̅0} facets are predominantly exposed. When cone-shaped ZnO nanocrystals were used, DSCs sensitized with C218, N719, and D205 dyes universally displayed better power conversion efficiency, with the highest photoconversion efficiency of 4.36% observed with the C218 dye. First-principles calculations indicated that the enhanced DSCs performance with ZnO nanocone photoanodes could be attributed to the strength of binding between the dye molecules and reactive O-terminated {101̅1} ZnO facets and that more effective use of dye molecules occurred due to a significantly less dye aggregation on these ZnO surfaces compared to other ZnO facets.

High coexpression of both EGFR and IGF1R correlates with poor patient prognosis in resected non-small-cell lung cancer

Background Recent experimental and biomarker evidence indicates that the epidermal growth factor receptor (EGFR) and insulin-like growth factor receptor 1 (IGF1R) interact in the pathogenesis of malignant epithelial tumors, including lung cancer. This study examines the expression of both receptors and their prognostic significance in surgically resected non-small-cell lung cancer (NSCLC). Methods EGFR and IGF1R expression were evaluated in 184 patients with NSCLC (83 squamous cell carcinomas [SCCs], 83 adenocarcinomas [ADCs], and 18 other types) using immunohistochemical (IHC) analysis. Expression of both receptors was examined in matched fresh frozen normal and tumor tissues from 40 patients with NSCLC (20 SCCs and 20 ADCs) by Western blot analysis. Results High EGFR expression was detected in 51% of patients, and SCCs had higher EGFR expression than did non-SCCs (57.4% vs. 42.5%; P =.028). High IGF1R expression was observed in 53.8% of patients, with SCC having higher expression than non-SCC (62.6% vs. 37.3%; P =.0004). A significant association was shown between EGFR and IGF1R protein overexpression (P <.005). Patients with high expression of both receptors had a poorer overall survival (OS) (P =.04). Higher EGFR and IGF1R expression was detected in resected tumors relative to matched normal tissues (P =.0004 and P =.0009), with SCC having higher expression levels than ADC. Conclusion Our findings indicate a close interrelationship between EGFR and IGF1R. Coexpression of both receptors correlates with poor survival. This subset of patients may benefit from treatments cotargeting EGFR and IGF1R. © 2014 Elsevier Inc. All rights reserved.

Comparison of high level FPGA hardware design for solving tri-diagonal linear systems

Reconfigurable computing devices can increase the performance of compute intensive algorithms by implementing application specific co-processor architectures. The power cost for this performance gain is often an order of magnitude less than that of modern CPUs and GPUs. Exploiting the potential of reconfigurable devices such as Field-Programmable Gate Arrays (FPGAs) is typically a complex and tedious hardware engineering task. Re- cently the major FPGA vendors (Altera, and Xilinx) have released their own high-level design tools, which have great potential for rapid development of FPGA based custom accelerators. In this paper, we will evaluate Altera’s OpenCL Software Development Kit, and Xilinx’s Vivado High Level Sythesis tool. These tools will be compared for their per- formance, logic utilisation, and ease of development for the test case of a Tri-diagonal linear system solver.

Conceptions of ‘community’ among older adults living in high-density urban areas : an Australian case study

Aim The aim of this study was to explore the social networks of community and its connection to location for older people living in inner city high density (ICHD). Method Using a case study approach employing qualitative (diaries, in-depth interviews) and quantitative (global positioning systems and geographical information systems mapping) methods, this paper explores the everyday interaction and social networks and where they manifest spatially for a group of older ICHD Australians. Results Social networks in two community territories were found to be of particular importance to participants in terms of influencing feelings of well-being, support, social inclusion and cohesion. These two territories include the building where older people reside and the area immediately surrounding the building. Conclusion This study highlights the importance of recognising the spatial aspect to better understand the social networks of community and their effects on well-being and social cohesion for ICHD older people.