Towards a more holistic approach to quality improvements in aluminium die casting

This work evaluates the feasibility of using a holistic approach, based on dynamical system theory,
to reduce porosity defects in high pressure aluminum die casting. Quality improvements, from a
dynamical system perspective mean the ability to move the die casting process out of its natural
equilibrium to a more beneficial state and the ability to maintain this new process state. This more beneficial state may be achieved in several ways. One way is to increase the amount of forcing to overcome natural process resistance. This forcing approach is represented by typical continuous intervention policy, with modifications in die/part design and/or process parameters. An alternative approach is to reduce the amount of natural process resistance, in particular the amount of process disturbance, allowing the process to move out of its natural equilibrium with much less forcing. This alternative uses the self-regulating ability of dynamical systems thus decreasing the amount of human intervention required. In this respect, the influence of vacuum on time on chattering at the first stage of the casting shot was identified as a good process candidate for testing using dynamical system theory. A significant reduction in porosity defects was achieved, which also set the process on a path of slow but consistent self-improvement.

Formability and forming of advanced steels

The thesis identified how advanced high strength steels perform compared to conventional steels in terms of weight reduction and crash performance for automotive bodies. The novel production method of low pressure tube hydroforming was applied to form these advanced steels to reduce the press tonnage and fluid pressure compared to the conventional high pressure process. In addition analytical models were developed to predict the force and pressure in the low pressure process.

Seasonal winds drive water temperature cycle and migration patterns of Southern Australian giant crab Pseudocarcinus gigas

The giant crab Pseudocarcinus gigas occurs along the continental shelf break of southern Australia. During the summer alongshore winds cause cooler water to upwell onto the shelf, and the crabs move from deeper water onto the shelf where there is more food. The combination of a preferred thermal niche and a depth-stratified food supply defines the favorable foraging environments that enhance the growth of P. gigas. Climate change is expected to cause a southerly shift of the austral subtropical high-pressure belt, and modelers have predicted more upwelling-favorable winds. The associated increase in the circulation of cooler water across the shelf is likely to provide P. gigas with an increased access to benthic food resources and their growth rate may increase in some regions.

Involvement of rootstocks and their hydraulic conductance in the drought resistance of grafted rubber trees

Improving drought resistance of rubber trees has become a pressing issue with the extension of rubber plantations and the prevalence of seasonal drought. Root system is vital to water and nutrients uptake of all plants, therefore, rootstocks could play decisive roles in drought resistance of grafted rubber trees on a specific scion clone. To investigate the responses of different clone rootstocks and their grafted trees to water stress and find applicable methods for selecting drought resistant rootstocks, seven related parameters and root hydraulic properties of both seeds originated and grafted saplings of PB86, PR107, RRIM600 and GT1 were measured to assess their drought resistance. It was shown that the rootstock drought resistance and root hydraulic conductance may improve the drought resistance of the grafted rubber trees. Among the four clone rootstocks, GT1, which demonstrated more resistant to drought and higher root hydraulic conductance, was comparatively resistant to drought both for the seed propagation seedlings and grafted saplings. In addition, studies on the grafted saplings with different root hydraulic conductance further validated the possibility of selecting drought resistant rootstocks on the basis of rootstock hydraulic conductance using a high-pressure flow meter.

Comparative studies of structural transition between AlN nanocrystals and nanowires

The structural transition of AIN nanocrystals and nanowires were investigated simultaneously under pressures up to 37.2 GPa by in situ angle dispersive high-pressure x-ray diffraction using synchrotron radiation source and a single diamond anvil cell. The size of hexagonal AIN nanocrystals and the diameter of nanowires are 45 nm on average. A pressure-induced wurtzite to rocksalt phase transition starts at 21.5 GPa and completes at 27.8 GPa for the nanocrystals and nanowires, respectively. The high-pressure behaviors of AlN nanocrystals the same as the AIN nanowires might arise from the similar size and diameter in nanocrystals and nanowires. Hexagonal AIN nanocrystals (45 nm) display an apparent volumetric contraction as compared to the AlN nanocrystals (10 nm) which might induce the difference of transition pressure.

Problems in seawater industrial desalination processes and potential sustainable solutions: a review

Seawater desalination has significantly developed towards membrane technology than phase change process during last decade. Seawater reverse osmosis (SWRO) in general is the most familiar process due to higher water recovery and lower energy consumption compared to other available desalination processes. Despite major advancements in SWRO technology, desalination industry is still facing significant amount of practical issues. Therefore, the potentials and problems faced by current SWRO industries and essential study areas are discussed in this review for the benefit of desalination industry. It is important to consider all the following five components in SWRO process i.e. (1) intake (2) pre-treatment (3) high pressure pumping (4) membrane separation (performance of membranes and brine disposal) and (5) product quality. Development of higher corrosion resistant piping materials or coating materials, valves, and pumps is believed to be in higher research demand. Furthermore, brine management, that includes brine disposal and resource recovery need further attention. Pre-treatment sludge management and reduced cleaning in place flush volume will reduce the capital costs associated with evaporation ponds and the maintenance costs associated with disposal and transportation reducing the unit cost of water. © 2013 Springer Science+Business Media Dordrecht.

Machining of titanium alloy (Ti-6Al-4V)-theory to application

This article correlates laboratory-based understanding in machining of titanium alloys with the industry based outputs and finds possible solutions to improve machining efficiency of titanium alloy Ti-6Al-4V. The machining outputs are explained based on different aspects of chip formation mechanism and practical issues faced by industries during titanium machining. This study also analyzed and linked the methods that effectively improve the machinability of titanium alloys. It is found that the deformation mechanism during machining of titanium alloys is complex and causes basic challenges, such as sawtooth chips, high temperature, high stress on cutting tool, high tool wear and undercut parts. These challenges are correlated and affected by each other. Sawtooth chips cause variation in cutting forces which results in high cyclic stress on cutting tools. On the other hand, low thermal conductivity of titanium alloy causes high temperature. These cause a favorable environment for high tool wear. Thus, improvements in machining titanium alloy depend mainly on overcoming the complexities associated with the inherent properties of this alloy. Vibration analysis kit, high pressure coolant, cryogenic cooling, thermally enhanced machining, hybrid machining and, use of high conductive cutting tool and tool holders improve the machinability of titanium alloy.

Negociação e liderança: papel da chefia direta na gestão da pressão

Este estudo tem por finalidade identificar perspectiva dos profissionais de Recursos Humanos a correlação entre as competências gerenciais e a relação construída entre líderes de diferentes níveis hierárquicos e suas equipes diretas, bem como o impacto na percepção da pressão e do estresse pelas suas respectivas equipes. Um dos desafios que gerentes e outros líderes encontram é como manter um time motivado e mobilizado em um ambiente de pressão crescente, seja decorrente de uma expansão ou uma retração do seu mercado. No primeiro capítulo e no segundo capítulos fazemos a introdução e a definição do Problema, os objetivos e delimitações do estudo. No terceiro capítulo caminhamos pela história do trabalho, da organização e do homem, buscando fundamentar no tempo a jornada em busca do equilíbrio trabalho e trabalhador, o lugar do homem na construção desta história e alguns importantes pensadores da gestão de pessoas. Este capítulo abre portas para entendermos o capítulo seguinte, no qual estudamos o estresse e, em particular, o estresse ocupacional. Mostramos, ainda, a diferença entre pressão – que está no ambiente externo- e estresse, que deriva da percepção do indivíduo. O interesse neste tema é decorrente da constatação prática de que a pressão aumenta em tempos de retração do mercado, mas também aumenta em períodos em o mercado está aquecido. Logo, se houver uma correlação entre como uma equipe ou um liderado ‘percebe’ o seu líder, essa informação poderá ser útil para a Gestão de Pessoas. Aprofundamos o conceito de Suporte Social, a rede que protege o colaborador nem contextos de alta pressão e demos maior ênfase ao papel do líder como importante fonte deste suporte. No quinto capítulo analisamos o tema conflito por ser um dos temas que mais impactam o estresse ocupacional. As relações de trabalho são, por sua natureza, relações de longo prazo, o que faz do manejo adequado do conflito no ambiente de trabalho um assunto relevante na agenda do gerente. Entretanto, seu manejo adequado depende tanto do diagnóstico correto, bem como da relação de confiança construída pelo líder. Embora cientes de que parte significativa dos conflitos está relacionada às estruturas e estratégias corporativas, propositalmente dirigimos nossa atenção aos gerentes e líderes que compõem a massa de liderança dessas organizações visando provocar idéias que possam contribuir para a melhoria das relações e dos resultados. No sexto capitulo apresentamos a Metodologia e no último capítulo apresentamos e discutimos o resultado da pesquisa realizada com profissionais de Recursos Humanos de grandes empresas, buscando, através do olhar do RH, uma percepção sobre as lideranças de cada empresa e a comparação entre líderes com maior ou menor capacidade de negociação junto à sua equipe. O estudo usou uma grade flexível suportada por um questionário semi-estruturado e os dados foram tratados usando a metodologia da Análise de Conteúdo sem que fosse necessário um tratamento estatístico devido ao tamanho da amostra. O estudo apontou para a necessidade de uma exploração mais profunda do tema uma vez que a literatura e os resultados iniciais demonstraram um importante papel da chefia direta na percepção grupal do estresse e no clima organizacional. Ao concluir o trabalho a pesquisa oferece algumas ponderações sobre o papel das lideranças e o papel das corporações na equalização de equipes que vivem sob pressão constante.

Avaliação do efeito da megadose de vitamina A no colostro humano

The mothers supplementation of vitamin A in the postpartum comes being a measure of intervention sufficiently used in the combat to the vitamin deficiency. The objective of this work was to evaluate the effect of the mother megadose of vitamin A under the levels of retinol in colostrum of postpartum mothers receiving care at the Januário Cicco Maternity School (MEJC), Natal, RN, as well as analyzing the influence of the maternal nutritional status in the reply to this supplementation. The study it was transversal type, with participation of 91 women in labor divided in group had participated of the study have controlled (44 women) and supplemented group (47 women). In the period of the morning blood and milk had been collected (milk 0h). After that a capsule of retinil palmitate of (200 000 UI or 60 mg) was supplied to the supplemented group. Another aliquot of colostro was after gotten 24h of the first collection (milk 24h). Retinol in milk and serum was quantified through the High Pressure Liquid Chromatography. The vitamin ingestion was evaluated by the questionnaire of frequency of alimentary consumption. The levels of serum retinol were 40.6 ± 10.6 and 35.9 ± 10.9 µg/dL in the groups controlled and supplemented, respectively. The women had presented a satisfactory average ingestion of vitamin (1492,4 µgRAE/dia), however with high prevalence of inadequate consumption (23%). Average values of retinol in milk 0h had been found and 24h of 93.5 ± 50.3 µg/dL and 99.1 ± 49.3 µg/dL has the group controlled group, respectively (p>0.05). After the supplementation had a significant increase in the levels of retinol of the supplemented group, being found values of 102.0 ± 56.0 µg/dL and 196.1 ± 74.0 µg/dL for milk 0h and 24h, respectively (p<0.0001). The women in labor presented different answers to the supplementation influenced for the basal levels of retinol in colostrum. It was possible to verify that women with deficient levels of retinol in milk had transferred more retinol to milk 24h than ones with adjusted levels, showing a percentage of reply equivalent to 326.1% and 86.5% of increase, respectively (p< 0.0001). Although the apparent normality found in the serum, the studied women are considered of risk to the development of the vitamin deficiency, and megadose was efficient in first 24h after the supplementation and wakes up with the mechanisms considered for transference of vitamin A to the milk

Nova técnica para obtenção de fraturas com altíssima condutividade em poços de petróleo

Increase hydrocarbons production is the main goal of the oilwell industry worldwide. Hydraulic fracturing is often applied to achieve this goal due to a combination of attractive aspects including easiness and low operational costs associated with fast and highly economical response. Conventional fracturing usually involves high-flowing high-pressure pumping of a viscous fluid responsible for opening the fracture in the hydrocarbon producing rock. The thickness of the fracture should be enough to assure the penetration of the particles of a solid proppant into the rock. The proppant is driven into the target formation by a carrier fluid. After pumping, all fluids are filtered through the faces of the fracture and penetrate the rock. The proppant remains in the fracture holding it open and assuring high hydraulic conductivity. The present study proposes a different approach for hydraulic fracturing. Fractures with infinity conductivity are formed and used to further improve the production of highly permeable formations as well as to produce long fractures in naturally fractured formations. Naturally open fractures with infinite conductivity are usually encountered. They can be observed in rock outcrops and core plugs, or noticed by the total loss of circulation during drilling (even with low density fluids), image profiles, pumping tests (Mini-Frac and Mini Fall Off), and injection tests below fracturing pressure, whose flow is higher than expected for radial Darcian ones. Naturally occurring fractures are kept open by randomly shaped and placed supporting points, able to hold the faces of the fracture separate even under typical closing pressures. The approach presented herein generates infinite conductivity canal held open by artificially created parallel supporting areas positioned both horizontally and vertically. The size of these areas is designed to hold the permeable zones open supported by the impermeable areas. The England & Green equation was used to theoretically prove that the fracture can be held open by such artificially created set of horizontal parallel supporting areas. To assess the benefits of fractures characterized by infinite conductivity, an overall comparison with finite conductivity fractures was carried out using a series of parameters including fracture pressure loss and dimensionless conductivity as a function of flow production, FOI folds of increase, flow production and cumulative production as a function of time, and finally plots of net present value and productivity index

A Produção mais Limpa como ferramenta em busca da sustentabilidade empresarial: um estudo de múltiplos casos em empresas do Estado do Rio Grande do Norte

This study aimed to assess the Cleaner Production CP as corporate sustainable tool, through the multiple case studies within companies from Rio Grande do Norte State. In order to achieve this goal a research methodology approach was set. The initial stage of the research methodology was based on a literature review on which it was observed that the CP can be linked with corporate sustainable once it prevents pollution and reduces the operational risks among employees, community and environment. In addition, CP can useful for companies position within competitive position as well as being applied to process, products and services. In order to observe these factors, CP was used within food industry (Company 1), textile industry (Company 2) and in a car dealer (Company 3). Regarding the results, Company 1 changed its raw material as well as implementing housekeeping (control use of water, energy and condensed milk). In Company 2, it was observed the three levels of CP. In other words, housekeeping (e.g. cutting process and manipulation of chemical products), changing technology (high pressure washing machine) and internal and external recycling. In addition, Company 3 considered only level 3 external recycling. As consequence, it was observed that can be applied either within industry as well as service sector. Unfortunately, it was not possible to observe any social gains on a monetary basis. This is due to limitations of the CP methodology and study complexity. Therefore, it was observed improvements regarding to social, environmental and economic areas. Nevertheless, it is necessary more commitment from top level management in order to consider CP like effective sustainable tool

Cellulose nanocomposites with nanofibres isolated from pineapple leaf fibers for medical applications

Nanocellulose is the crystalline domains obtained from renewable cellulosic sources, used to increase mechanical properties and biodegrability in polymer composites. This work has been to study how high pressure defibrillation and chemical purification affect the PALF fibre morphology from micro to nanoscale. Microscopy techniques and X-ray diffraction were used to study the structure and properties of the prepared nanofibers and composites. Microscopy studies showed that the used individualization processes lead to a unique morphology of interconnected web-like structure of PALF fibers. The produced nanofibers were bundles of cellulose fibers of widths ranging between 5 and 15 nm and estimated lengths of several micrometers. Percentage yield and aspect ratio of the nanofiber obtained by this technique is found to be very high in comparison with other conventional methods. The nanocomposites were prepared by means of compression moulding, by stacking the nanocellulose fibre mats between polyurethane films. The results showed that the nanofibrils reinforced the polyurethane efficiently. The addition of 5 wt% of cellulose nanofibrils to PU increased the strength nearly 300% and the stiffness by 2600%. The developed composites were utilized to fabricate various versatile medical implants. (C) 2011 Elsevier Ltd. All rights reserved.

Simulação de reservatórios não convencionais para armazenamento de gás natural veicular

The investigation of viability to use containers for Natural Gas Vehicle (NGV) storage, with different geometries of commercial standards, come from necessity to join the ambient, financial and technological benefits offered by the gas combustion, to the convenience of not modify the original proposal of the automobile. The use of these current cylindrical models for storage in the converted vehicles is justified by the excellent behavior that this geometry presents about the imposed tensions for the high pressure that the related reservoirs are submitted. However, recent research directed toward application of adsorbent materials in the natural gas reservoirs had proven a substantial redusction of pressure and, consequently, a relief of the tensions in the reservoirs. However, this study considers alternative geometries for NGV reservoirs, searching the minimization of dimensions and weight, remaining capacity to resist the tensions imposed by the new pressure situation. The proposed reservoirs parameters are calculated through a mathematical study of the internal pressure according to Brazilian standards (NBR) for pressure vessels. Finally simulations of the new geometries behavior are carried through using a commercially avaible Finite Element Method (FEM) software package ALGOR® to verify of the reservoirs efficincy under the gas pressure load

Estudo da influência de pré-tratamentos de dois resíduos lignocelulósicos (bagaço do pedúnculo de caju e casca de coco) utilizados como substrato na indução à síntese de enzimas celulolíticas

Nowadays generation ethanol second, that t is obtained from fermentation of sugars of hydrolyses of cellulose, is gaining attention worldwide as a viable alternative to petroleum mainly for being a renewable resource. The increase of first generation ethanol production i.e. that obtained from sugar-cane molasses could lead to a reduction of lands sustainable for crops and food production. However, second generation ethanol needs technologic pathway for reduce the bottlenecks as production of enzymes to hydrolysis the cellulose to glucose i.e. the cellulases as well as the development of efficient biomass pretreatment and of low-cost. In this work Trichoderma reesei ATCC 2768 was cultivated under submerged fermentation to produce cellulases using as substrates waste of lignocellulosic material such as cashew apple bagasse as well as coconut bagasse with and without pretreatment. For pretreatment the bagasses were treated with 1 M NaOH and by explosion at high pressure. Enzyme production was carried out in shaker (temperature of 27ºC, 150 rpm and initial medium pH of 4.8). Results showed that T.reesei ATCC 2768 showed the higher cellulase production when the cashew apple bagasse was treated with 1M NaOH (2.160 UI/mL of CMCase and 0.215 UI/mL of FPase), in which the conversion of cellulose, in terms of total reducing sugars, was of 98.38%, when compared to pretreatment by explosion at high pressure (0.853 UI/mL of CMCase and 0.172 UI/mL of Fpase) showing a conversion of 47.39% of total reducing sugars. Cellulase production is lower for the medium containing coconut bagasse treated with 1M NaOH (0.480 UI/mL of CMcase and 0.073 UI/mL of FPase), giving a conversion of 49.5% in terms of total reducing sugars. Cashew apple bagasse without pretreatment showed cellulase activities lower (0.535 UI/mL of CMCase and 0,152 UI/mL of FPase) then pretreated bagasse while the coconut bagasse without pretreatment did not show any enzymatic activity. Maximum cell concentration was obtained using cashew nut bagasse as well as coconut shell bagasse treated with 1M NaOH, with 2.92 g/L and 1.97 g/L, respectively. These were higher than for the experiments in which the substrates were treated by explosion at high pressure, 1.93 g/L and 1.17 g/L. Cashew apple is a potential inducer for cellulolytic enzymes synthysis showing better results than coconut bagasse. Pretreatment improves the process for the cellulolytic enzyme production