Phylogenetic conservatism in plant phenology

Phenological events - defined points in the life cycle of a plant or animal - have been regarded as highly plastic traits, reflecting flexible responses to various environmental cues. The ability of a species to track, via shifts in phenological events, the abiotic environment through time might dictate its vulnerability to future climate change. Understanding the predictors and drivers of phenological change is therefore critical. Here, we evaluated evidence for phylogenetic conservatism - the tendency for closely related species to share similar ecological and biological attributes - in phenological traits across flowering plants. We aggregated published and unpublished data on timing of first flower and first leaf, encompassing 4000 species at 23 sites across the Northern Hemisphere. We reconstructed the phylogeny for the set of included species, first, using the software program Phylomatic, and second, from DNA data. We then quantified phylogenetic conservatism in plant phenology within and across sites. We show that more closely related species tend to flower and leaf at similar times. By contrasting mean flowering times within and across sites, however, we illustrate that it is not the time of year that is conserved, but rather the phenological responses to a common set of abiotic cues. Our findings suggest that species cannot be treated as statistically independent when modelling phenological responses.Synthesis. Closely related species tend to resemble each other in the timing of their life-history events, a likely product of evolutionarily conserved responses to environmental cues. The search for the underlying drivers of phenology must therefore account for species' shared evolutionary histories.

Pathology of the spleen in hepatosplenic schistosomiasis. Morphometric evaluation and extracellular matrix changes

Histological, ultrastructural, morphometric and immunohistochemical data obtained from the study of spleens removed by splenectomy from 34 patients with advanced hepatosplenic schistosomiasis revealed that the main alterations were congestive dilatation of the venous sinuses and diffuse thickening of the splenic cords. Splenic cord thickening was due to an increase of its matrix components, especially type IV collagen and laminin, with the conspicuous absence of interstitial collagens, either of type I or type III. Deposition of interstitial collagens (types I and III) occurred in scattered, small focal areas of the red pulp, but in the outside of the walls of the venous sinuses, in lymph follicles, marginal zone, in the vicinity of fibrous trabeculae and in sidero-sclerotic nodules. However, fibrosis was not a prominent change in schistosomal splenomegaly and thus the designation "fibro-congestive splenomegaly" seems inadequate. Lymph follicles exhibited variable degrees of atrophy, hyperplasia and fibrous replacement, sometimes all of them seen in different follicles of the same spleen and even in the same examined section. Changes in white pulp did not seem to greatly contribute to increasing spleen size and weight, when compared to the much more significant red pulp enlargement.

Novel loci for adiponectin levels and their influence on type 2 diabetes and metabolic traits: a multi-ethnic meta-analysis of 45,891 individuals.

Circulating levels of adiponectin, a hormone produced predominantly by adipocytes, are highly heritable and are inversely associated with type 2 diabetes mellitus (T2D) and other metabolic traits. We conducted a meta-analysis of genome-wide association studies in 39,883 individuals of European ancestry to identify genes associated with metabolic disease. We identified 8 novel loci associated with adiponectin levels and confirmed 2 previously reported loci (P = 4.5×10(-8)-1.2×10(-43)). Using a novel method to combine data across ethnicities (N = 4,232 African Americans, N = 1,776 Asians, and N = 29,347 Europeans), we identified two additional novel loci. Expression analyses of 436 human adipocyte samples revealed that mRNA levels of 18 genes at candidate regions were associated with adiponectin concentrations after accounting for multiple testing (p<3×10(-4)). We next developed a multi-SNP genotypic risk score to test the association of adiponectin decreasing risk alleles on metabolic traits and diseases using consortia-level meta-analytic data. This risk score was associated with increased risk of T2D (p = 4.3×10(-3), n = 22,044), increased triglycerides (p = 2.6×10(-14), n = 93,440), increased waist-to-hip ratio (p = 1.8×10(-5), n = 77,167), increased glucose two hours post oral glucose tolerance testing (p = 4.4×10(-3), n = 15,234), increased fasting insulin (p = 0.015, n = 48,238), but with lower in HDL-cholesterol concentrations (p = 4.5×10(-13), n = 96,748) and decreased BMI (p = 1.4×10(-4), n = 121,335). These findings identify novel genetic determinants of adiponectin levels, which, taken together, influence risk of T2D and markers of insulin resistance.

Association of adiposity genetic variants with menarche timing in 92,105 women of European descent.

Obesity is of global health concern. There are well-described inverse relationships between female pubertal timing and obesity. Recent genome-wide association studies of age at menarche identified several obesity-related variants. Using data from the ReproGen Consortium, we employed meta-analytical techniques to estimate the associations of 95 a priori and recently identified obesity-related (body mass index (weight (kg)/height (m)(2)), waist circumference, and waist:hip ratio) single-nucleotide polymorphisms (SNPs) with age at menarche in 92,116 women of European descent from 38 studies (1970-2010), in order to estimate associations between genetic variants associated with central or overall adiposity and pubertal timing in girls. Investigators in each study performed a separate analysis of associations between the selected SNPs and age at menarche (ages 9-17 years) using linear regression models and adjusting for birth year, site (as appropriate), and population stratification. Heterogeneity of effect-measure estimates was investigated using meta-regression. Six novel associations of body mass index loci with age at menarche were identified, and 11 adiposity loci previously reported to be associated with age at menarche were confirmed, but none of the central adiposity variants individually showed significant associations. These findings suggest complex genetic relationships between menarche and overall obesity, and to a lesser extent central obesity, in normal processes of growth and development.

Incompletely resolved phylogenetic trees inflate estimates of phylogenetic conservatism.

The tendency for more closely related species to share similar traits and ecological strategies can be explained by their longer shared evolutionary histories and represents phylogenetic conservatism. How strongly species traits co-vary with phylogeny can significantly impact how we analyze cross-species data and can influence our interpretation of assembly rules in the rapidly expanding field of community phylogenetics. Phylogenetic conservatism is typically quantified by analyzing the distribution of species values on the phylogenetic tree that connects them. Many phylogenetic approaches, however, assume a completely sampled phylogeny: while we have good estimates of deeper phylogenetic relationships for many species-rich groups, such as birds and flowering plants, we often lack information on more recent interspecific relationships (i.e., within a genus). A common solution has been to represent these relationships as polytomies on trees using taxonomy as a guide. Here we show that such trees can dramatically inflate estimates of phylogenetic conservatism quantified using S. P. Blomberg et al.'s K statistic. Using simulations, we show that even randomly generated traits can appear to be phylogenetically conserved on poorly resolved trees. We provide a simple rarefaction-based solution that can reliably retrieve unbiased estimates of K, and we illustrate our method using data on first flowering times from Thoreau's woods (Concord, Massachusetts, USA).

Der Erfolg der Spiritualität. Gesellschaftsentwicklung und Transzendenzerfahrung am Beispiel der Schweiz

(Résumé de l'ouvrage) Viele Menschen sind heute auf der Suche nach Sinn und Orientierung in einer Gesellschaft, die geprägt ist von Säkularisierung und Individualisierung. Die kirchlichen Glaubenssysteme scheinen ihre bindende Kraft verloren zu haben. Sie werden zunehmend von individuellen Wegen und kleinen Weggemeinschaften abgelöst. Der vorliegende Sammelband reflektiert diesen Wandel aus den Blickwinkeln der Wissenschaft und der spirituellen Praxis. Spiritualität und Wissenschaft sind zwei unterschiedliche Ansätze, die Welt zu erfahren und zu erklären. Die gegenseitige Skepsis macht jedoch den Dialog schwierig. Das Projekt "Spiritualität und Wissenschaft" hat Sachverständige beider Bereiche zum Gespräch zusammengeführt: In ihren Beiträgen wagen Manager, Soziologen, Theologinnen, Philosophen, Mediziner, Mönche und spirituelle Lehrerinnen Definitionen und berichten über ihre Untersuchungen und Erfahrungen. Indem sie die Beziehungen zwischen Spiritualität und Religion, Medizin, Wirtschaft und Wissenschaft ausleuchten, skizzieren sie ein differenziertes Bild der beiden Wirklichkeitsbeschreibungen und ihres Wechselspiels bei der Erfassung der "Realität". Der Band beruht auf einer gleichnamigen Veranstaltungsreihe des Forums für Universität und Gesellschaft der Universität Bern. Er wird ergänzt durch eine CD mit einer Sendung von Radio "chrüz u quer" zu den projektbegleitenden Workshops über spirituelle Wege.

A large study of androgen receptor germline variants and their relation to sex hormone levels and prostate cancer risk. Results from the National Cancer Institute Breast and Prostate Cancer Cohort Consortium

Background: Androgens are key regulators of prostate gland maintenance and prostate cancer growth, and androgen deprivation therapy has been the mainstay of treatment for advanced prostate cancer for many years. A long-standing hypothesis has been that inherited variation in the androgen receptor (AR) gene plays a role in prostate cancer initiation. However, studies to date have been inconclusive and often suffered from small sample sizes. Objective and Methods: We investigated the association of AR sequence variants with circulating sex hormone levels and prostate cancer risk in 6058 prostate cancer cases and 6725 controls of Caucasian origin within the Breast and Prostate Cancer Cohort Consortium. We genotyped a highly polymorphic CAG microsatellite in exon 1 and six haplotype tagging single nucleotide polymorphisms and tested each genetic variant for association with prostate cancer risk and with sex steroid levels. Results: We observed no association between AR genetic variants and prostate cancer risk. However, there was a strong association between longer CAG repeats and higher levels of testosterone (P = 4.73 × 10−5) and estradiol (P = 0.0002), although the amount of variance explained was small (0.4 and 0.7%, respectively). Conclusions: This study is the largest to date investigating AR sequence variants, sex steroid levels, and prostate cancer risk. Although we observed no association between AR sequence variants and prostate cancer risk, our results support earlier findings of a relation between the number of CAG repeats and circulating levels of testosterone and estradiol.

A genome-wide association search for type 2 diabetes genes in African Americans.

African Americans are disproportionately affected by type 2 diabetes (T2DM) yet few studies have examined T2DM using genome-wide association approaches in this ethnicity. The aim of this study was to identify genes associated with T2DM in the African American population. We performed a Genome Wide Association Study (GWAS) using the Affymetrix 6.0 array in 965 African-American cases with T2DM and end-stage renal disease (T2DM-ESRD) and 1029 population-based controls. The most significant SNPs (n = 550 independent loci) were genotyped in a replication cohort and 122 SNPs (n = 98 independent loci) were further tested through genotyping three additional validation cohorts followed by meta-analysis in all five cohorts totaling 3,132 cases and 3,317 controls. Twelve SNPs had evidence of association in the GWAS (P<0.0071), were directionally consistent in the Replication cohort and were associated with T2DM in subjects without nephropathy (P<0.05). Meta-analysis in all cases and controls revealed a single SNP reaching genome-wide significance (P<2.5×10(-8)). SNP rs7560163 (P = 7.0×10(-9), OR (95% CI) = 0.75 (0.67-0.84)) is located intergenically between RND3 and RBM43. Four additional loci (rs7542900, rs4659485, rs2722769 and rs7107217) were associated with T2DM (P<0.05) and reached more nominal levels of significance (P<2.5×10(-5)) in the overall analysis and may represent novel loci that contribute to T2DM. We have identified novel T2DM-susceptibility variants in the African-American population. Notably, T2DM risk was associated with the major allele and implies an interesting genetic architecture in this population. These results suggest that multiple loci underlie T2DM susceptibility in the African-American population and that these loci are distinct from those identified in other ethnic populations.

Calbindin D-28k- and substance P-immunoreactive primary sensory neurons: peripheral projections in chick hindlimbs.

The peripheral projections of two distinct subpopulations of primary sensory neurons, expressing either calbindin D-28k or substance P, were studied in chick hindlimbs by immunodetecting calbindin D-28k with a rabbit antiserum and substance P with a mouse monoclonal antibody. Calbindin D-28k-immunoreactive axons provided an innervation restricted to specific mechanoreceptors such as muscle spindles, Herbst and Merkel corpuscles, or collars of feather follicles but were absent from Golgi tendon organs. In contrast, substance P-positive axons spread out diffusely in muscles and skin, formed loose plexuses, and extended free branches to the endomysium, arteries, superficial dermis, or dermal pulp of feather follicles. The present results show that calbindin D-28k- and substance P-immunoreactive primary sensory neurons provide distinct modes of innervation to selective targets in peripheral tissues. The results suggest a possible correlation between CaBP-expressing nerve endings and rapidly adapting mechanoreceptors.

Disseny i muntatge d'un sistema de depuració ciclònica per reciclatge de paper

El projecte s’emmarca dins de l’àmbit de la indústria paperera, i dins el procés defabricació del paper es centra concretament amb l’etapa de la depuració ciclònica, una etapa en la qual es pretenen eliminar aquelles partícules sòlides que acompanyen la pasta de paper i que no són desitjables ja que afecten les característiques del paper i el funcionament de la resta d’equips del procés de fabricació. Es presenta una demanda de projecte per part del grup LEPAMAP (Laboratori d’Enginyeria Paperera i Materials Polímers) sobre el disseny d’una instal•lació de depuració ciclònica, mitjançant un hidrocicló, per realitzar activitats de recerca. Un hidrocicló és un equip que separa gràcies a la força centrífuga del flux d’entrada i pel seu disseny amb forma de con invertit. Així doncs, els objectius bàsics d’aquest projecte són dissenyar una instal•lació de depuració adequada per depurar una pasta de paper de possibles contaminants sòlids, la qual cosa implica el disseny d’una bomba centrífuga per impulsar el flux cap a l’interior de l’hidrocicló, dipòsits per emmagatzemar i preparar la suspensió, un agitador per mantenir en tot moment la homogeneïtat de la suspensió i uns dispositius de mesura i control per mesurar i controlar variables com el cabal, la pressió o el volum.El segon objectiu tracta de posar en marxa la instal•lació i comprovar si aquest equip,l’hidrocicló, separa correctament les partícules sòlides del flux de pasta.Paral•lelament s’ha estudiat quins són els equips de depuració més importants a laindústria paperera així com les etapes més importants que formen part del procés de fabricació del paper

Materials nanocomposits a partir de whiskers de cel•lulosa i matriu polimèrica de cautxú

De acuerdo con los objetivos generales del proyecto y plan de trabajo previsto, para esta anualidad, se obtuvieron fibras y microfibras de celulosa a partir de dos fuentes: celulosa vegetal de pino y eucalipto y celulosa bacterial. Las microfibrillas han sido utilizadas como material de refuerzo para la fabricación de materiales compuestos a partir de caucho natural, policaprolactona y polivinil alcohol. Las muestras se fabricaron mediante la técnica de "casting" en medio acuoso y temperatura ambiente. Las muestras fueron caracterizados en sus propiedades mecánicas, físicas y térmicas. Se observó que, en general, la adición de las microfibrillas de celulosa en las matrices poliméricas provoca una mejora sustancial en las propiedades mecánicas del material en comparación con el polímero sin reforzar. Los resultados pueden resumirse de la siguiente manera: 1.Fabricación de materiales compuestos a base de caucho natural y fibras de celulosa. Se obtuvieron fibras y nanofibras de celulosa que fueron modificadas químicamente y usadas como refuerzo en matriz de caucho. Los resultados mostraron mejora de propiedades mecánicas del material, principalmente en los materiales compuestos reforzados con nanofibras. 2. Obtención de whiskers de celulosa y su utilización como material de refuerzo en una matriz de policaprolactona. Se obtuvieron whiskers de celulosa a partir de pasta blanqueada. La adición en una matriz de policaprolactona produjo materiales compuestos con propiedades mecánicas superiores a la matriz, con buena dispersión de los whiskers. 3. Obtención de fibras de celulosa bacterial y nanofibras de celulosa, aislamiento y utilización sobre una matriz de polivinil alcohol. Se obtuvo celulosa bacterial a partir de la bacteria Gluconacetobacter xylinum. Además se fabricaron nanofibras de celulosa a partir eucalipto blanqueado. La celulosa bacterial como material de refuerzo no produjo importantes mejoras en las propiedades mecánicas de la matriz; en cambio se observaron mejoras destacables con la nanofibra como refuerzo.

Acoustic properties of polypropylene composites reinforced with stone groundwood

Currently, acoustic isolation is one of the problems raised with building construction in Spain. The publication of the Basic Document for the protection against noise of the Technical Building Code has increased the demand of comfort for citizens. This has created the need to seek new composite materials that meet the new required acoustical building codes. In this paper we report the results of the newly developed composites that are able to improve the acoustic isolation of airborne noise. These composites were prepared from polypropylene (PP) reinforced with mechanical pulp fibers from softwood (Pinus radiata). Mechanical and acoustical properties of the composites from mechanical pulp (MP) and polypropylene (PP) have been investigated and compared to fiberglass (FG) composites. MP composites had lower tensile properties compared with FG composites, although these properties can be improved by incorporation of a coupling agent. The results of acoustical properties of MP composites were reported and compared with the conventional composites based on fiberglass and gypsum plasterboards. Finally, we suggest the application of MP composites as a light-weight building material to reduce acoustic transmitions

Estudi de reactius químics alternatius per al blanqueig de pastes termomecàniques : efecte en les propietats òptiques de les pastes i en la qualitat dels efluents del procés

Aquest estudi s’emmarca en un projecte titulat “Noves possibilitats en el blanqueig en lespastes destintades: Alternatives al blanqueig amb sosa càustica i peròxid d’hidrogen” i estàsubvencionat per diverses empreses europees del sector. La seva realització s’ha dut a termeen el Centre Technique du Papier, a Grenoble, França. L’estudi contempla la realitzaciód’una part del projecte, i té per objecte analitzar els Na2SiO3 modificats, el hidròxid demagnesi (Mg(OH)2) i el hidròxid de calci (Ca(OH)2) per veure si poden actuar com asubstituts del NaOH. Cal intentar aconseguir valors de blancor similars als assolits amb elblanqueig estàndard i millorar substancialment la qualitat de les aigües. Segons el centre derecerca es pot considerar una millora projectable a nivell industrial una reducció de la DQO ide la demanda catiònica a partir d’un 10% a nivell experimental.La pasta que es blanqueja és TMP verge. Els resultats obtinguts a nivell de blancor tambépoden ser considerats aplicables en paper recuperat, prèviament destintat, provenintd’aquest tipus de pasta

The suitability of steam exploded vitis vinifera and alkaline lignin for the manufacture of fiberboard

The main objective of this study was to explore the suitability of Vitis vinifera as a raw material and alkaline lignin as a natural binder for fiberboard manufacturing. In the first step, Vitis vinifera was steam- exploded through a thermo-mechanical vapor process in a batch reactor, and the obtained pulp was dried, ground, and pressed to produce the boards. The effects of pretreatment factors and pressing conditions on the chemical composition of the fibers and the physico-mechanical properties of binderless fiberboards were evaluated, and the conditions that optimize these properties were found. A response surface method based on a central composite design and multiple-response optimization was used. The variables studied and their respective variation ranges were: pretreatment temperature (Tr: 190-210ºC), pretreatment time (tr: 5-10 min), pressing temperature (Tp: 190-210ºC), pressing pressure (Pp: 8-16MPa), and pressing time (tp: 3-7min). The results of the optimization step show that binderless fiberboards have good water resistance and weaker mechanical properties. In the second step, fiberboards based on alkaline lignin and Vitis vinifera pulp produced at the optimal conditions determined for binderless fiberboards were prepared and their physico-mechanical properties were tested. Our results show that the addition of about 15% alkaline lignin leads to the production of fiberboards that fully meet the requirements of the relevant standard specifications

Characterization of alkaline lignins for use in penol-formaldehyde and epoxy resins

Besides polyurethanes and polyesters, phenolic and epoxy resins are the most prominent applications for technical lignins in thermosetting materials. To evaluate the potential application of lignin raw materials in phenol formaldehyde and epoxy resins, three types of alkaline lignins were characterized in terms of their structures and thermal properties. The lignin samples analyzed were kraft lignin (LIG-1), soda–rice straw lignin (LIG-2), and soda-wheat straw lignin (LIG-3). FTIR and 1H-NMR methods were used to determine their structure. Gel permeation chromatography (GPC) was used to determine the molecular weight distribution (MWD). Differential scanning calorimetry (DSC) was used to measure the glass transition temperature (Tg), and thermogravimetric analysis (TGA) to determine the thermal stability of lignin samples. Results showed that kraft lignin (LIG-1) has moderate hydroxyl-group content, is rich in G-type units, and has good thermal stability. These properties make it more suitable for direct use in phenol formaldehyde resins, and it is therefore a good raw material for this purpose. The alkaline soda-rice straw lignin (LIG-2) with a high hydroxyl-group content and excellent thermal stability is most suited to preparing lignin-based epoxy resin