Redundant nerve roots of the cauda equina: review of the literature

In imaging diagnosis, redundant nerve roots of the cauda equina are characterized by the presence of elongated, enlarged and tortuous nerve roots in close relationship with a high-grade lumbar spinal canal stenosis. This is not an independent entity, but it is believed to be a consequence of the chronic compression at the level of the lumbar canal stenosis and thus may be part of the natural history of lumbar spinal stenosis. The present paper is aimed at reviewing the histopathological, electrophysiological and imaging findings, particularly at magnetic resonance imaging, as well as the clinical meaning of this entity. As the current assessment of canal stenosis and root compression is preferably performed by means of magnetic resonance imaging, this is the imaging method by which the condition is identified. The recognition of redundant nerve roots at magnetic resonance imaging is important, particularly to avoid misdiagnosing other conditions such as intradural arteriovenous malformations. The literature approaching the clinical relevance of the presence of redundant nerve roots is controversial. There are articles suggesting that the pathological changes of the nerve roots are irreversible at the moment of diagnosis and therefore neurological symptoms are less likely to improve with surgical decompression, but such concept is not a consensus.

Pelvic lipomatosis: a case report and literature review

Pelvic lipomatosis is a rare disorder where fat tissue deposition is observed in spaces of the pelvic area, causing extrinsic compression of the bladder, rectum and blood vessels. In the present report, the authors describe the case of a 48-year-old male patient presenting low back pain, dysuria and pollakiuria. Findings at excretory urography, computed tomography and magnetic resonance imaging are described.

Pyogenic and tuberculous discitis: magnetic resonance imaging findings for differential diagnosis

Spondylodiscitis represents 2%–4% of all bone infections cases. The correct diagnosis and appropriate treatment can prevent complications such as vertebral collapse and spinal cord compression, avoiding surgical procedures. The diagnosis is based on characteristic clinical and radiographic findings and confirmed by blood culture and biopsy of the disc or the vertebra. The present study was developed with Clementino Fraga Filho University Hospital patients with histopathologically and microbiologically confirmed diagnosis of spondylodiscitis, submitted to magnetic resonance imaging of the affected regions. In most cases, pyogenic spondylodiscitis affects the lumbar spine. The following findings are suggestive of the diagnosis: segmental involvement; ill-defined abscesses; early intervertebral disc involvement; homogeneous vertebral bodies and intervertebral discs involvement. Tuberculous spondylodiscitis affects preferentially the thoracic spine. Most suggestive signs include: presence of well-defined and thin-walled abscess; multisegmental, subligamentous involvement; heterogeneous involvement of vertebral bodies; and relative sparing of intervertebral discs. The present pictorial essay is aimed at showing the main magnetic resonance imaging findings of pyogenic and tuberculous discitis.

Re-disseny d’utillatge i anàlisi de vinclament per l’assaig de compressió en laminats prims

El grup de recerca AMADE de la Universitat de Girona està especialitzat en la caracteritzacióde materials compòsits. Per avaluar la resistència i la tolerància al dany d'aquestes estructures,típicament es realitzen dos assajos: impacte a baixa velocitat i compressió després d'impacte(CAI per les sigles en anglès de Compression After Impact), respectivament. L'objectiu del'assaig CAI és obtenir la resistència residual a compressió de l'estructura.L'objectiu d'aquest treball és el de crear una adaptació per l'utillatge capaç d'assajar plaquesamb baix gruix . La modelització amb el mètode dels elements finits serveix per avaluar quantitativament el valorde les càrregues crítiques de vinclament per diferents gruixos de placa.Les plaques d'assaig són plaques de material compòsit amb làmines unidireccionals amb apilamentsimètric i balancejat

Evolution of mammographic image quality in the state of Rio de Janeiro

Objective:To evaluate the evolution of mammographic image quality in the state of Rio de Janeiro on the basis of parameters measured and analyzed during health surveillance inspections in the period from 2006 to 2011.Materials and Methods:Descriptive study analyzing parameters connected with imaging quality of 52 mammography apparatuses inspected at least twice with a one-year interval.Results:Amongst the 16 analyzed parameters, 7 presented more than 70% of conformity, namely: compression paddle pressure intensity (85.1%), films development (72.7%), film response (72.7%), low contrast fine detail (92.2%), tumor mass visualization (76.5%), absence of image artifacts (94.1%), mammography-specific developers availability (88.2%). On the other hand, relevant parameters were below 50% conformity, namely: monthly image quality control testing (28.8%) and high contrast details with respect to microcalcifications visualization (47.1%).Conclusion:The analysis revealed critical situations in terms of compliance with the health surveillance standards. Priority should be given to those mammography apparatuses that remained non-compliant at the second inspection performed within the one-year interval.

Robust watermarking scheme based on the JPEG2000 standard

Peer reviewed

Identification and conservation of remnant genetic resources of brown trout in relict populations from Western Mediterranean streams

Brown trout is a cold-adapted freshwater species with restricted distribution to headwater streams in rivers of the South European peninsulas, where populations are highly vulnerable because Mediterranean regions are highly sensitive to the global climatic warming. Moreover, these populations are endangered due to the introgressive hybridization with cultured stocks. Individuals from six remnant populations in Western Mediterranean rivers were sequenced for the complete mitochondrial DNA control region and genotyped for 11 nuclear markers. Three different brown trout lineages were present in the studied region. Significant genetic divergence was observed among locations and a strong effect of genetic drift was suggested. An important stocking impact (close to 25%) was detected in the zone. Significant correlations between mitochondrial-based rates of hatchery introgression and water flow variation suggested a higher impact of stocked females in unstable habitats. In spite of hatchery introgression, all populations remained highly differentiated, suggesting that native genetic resources are still abundant. However, climatic predictions indicated that suitable habitats for the species in these rivers will be reduced and hence trout populations are highly endangered and vulnerable. Thus, management policies should take into account these predictions to design upstream refuge areas to protect remnant native trout in the region

Syrjäytystilavuuspumpun toiminnallisen välyksen säätömekanismin kehitys

Syrjäytystilavuuspumppua käytetään kuluttavien, syövyttävien, jähmeiden ja kiteytyvien väliaineiden pumppaukseen. Sähkömoottorin pyörittämä akseli puristaa rullan välityksellä letkun tiiviisti rungon sisäpintaa vasten työntäen samalla väliainetta edellään kulkiessaan letkua pitkin. Puristuksen jälkeen letku palautuu pyöreään muotoonsa muodostaen alipaineen pumpun imupuolelle. Nykyisen konstruktion iskunsäätö on toteutettu ruuvi-epäkeskomekanismilla, jolle haetaan vaihtoehtoja. Tässä työssä on tavoitteena kehittää syrjäytystilavuuspumpun iskunsäätömekanismista nykyistä konstruktiota yksinkertaisempi ja halvempi vaihtoehto. Työssä ideoidaan koneensuunnittelun perinteisin keinoin uusia ratkaisuvaihtoehtoja, joista kaksi valitaan jatkokehitykseen. Näistä kahdesta valitaan nykyiseen konstruktioon tehdyn vertailun jälkeen toinen lopulliseksi vaihtoehdoksi.

Trigger and data link system for CMS Resistive Plate Chambers at the LHC accelerator

The purpose of the work was to realize a high-speed digital data transfer system for RPC muon chambers in the CMS experiment on CERN’s new LHC accelerator. This large scale system took many years and many stages of prototyping to develop, and required the participation of tens of people. The system interfaces to Frontend Boards (FEB) at the 200,000-channel detector and to the trigger and readout electronics in the control room of the experiment. The distance between these two is about 80 metres and the speed required for the optic links was pushing the limits of available technology when the project was started. Here, as in many other aspects of the design, it was assumed that the features of readily available commercial components would develop in the course of the design work, just as they did. By choosing a high speed it was possible to multiplex the data from some the chambers into the same fibres to reduce the number of links needed. Further reduction was achieved by employing zero suppression and data compression, and a total of only 660 optical links were needed. Another requirement, which conflicted somewhat with choosing the components a late as possible was that the design needed to be radiation tolerant to an ionizing dose of 100 Gy and to a have a moderate tolerance to Single Event Effects (SEEs). This required some radiation test campaigns, and eventually led to ASICs being chosen for some of the critical parts. The system was made to be as reconfigurable as possible. The reconfiguration needs to be done from a distance as the electronics is not accessible except for some short and rare service breaks once the accelerator starts running. Therefore reconfigurable logic is extensively used, and the firmware development for the FPGAs constituted a sizable part of the work. Some special techniques needed to be used there too, to achieve the required radiation tolerance. The system has been demonstrated to work in several laboratory and beam tests, and now we are waiting to see it in action when the LHC will start running in the autumn 2008.

Features extraction based on the Discrete Hartley Transform for closed contour

In this paper the authors propose a new closed contour descriptor that could be seen as a Feature Extractor of closed contours based on the Discrete Hartley Transform (DHT), its main characteristic is that uses only half of the coefficients required by Elliptical Fourier Descriptors (EFD) to obtain a contour approximation with similar error measure. The proposed closed contour descriptor provides an excellent capability of information compression useful for a great number of AI applications. Moreover it can provide scale, position and rotation invariance, and last but not least it has the advantage that both the parameterization and the reconstructed shape from the compressed set can be computed very efficiently by the fast Discrete Hartley Transform (DHT) algorithm. This Feature Extractor could be useful when the application claims for reversible features and when the user needs and easy measure of the quality for a given level of compression, scalable from low to very high quality.

The performance and the characteristic field of a centrifugal compressor

Tässä työssä tarkastellaan radiaalikompressorin puristusprosessiin liittyvä peruslaskenta. Ilmankosteuden vaikutukset laskentaan huomioidaan ja kompressorin tunnuskenttä esitellään tässä työssä. Esimerkkinä lasketaan pisteitä kompressorin tunnuskentästä.

Secure logarithmic audio watermarking scheme based on the human auditory system

Peer-reviewed

Akateemiset urapolut. Humanistisen, yhteiskuntatieteellisen ja kasvatustieteellisen alan generalistien urapolkujen alkuvaiheet 1980- ja 1990-luvuilla

Academic Career Paths. The early career phases of generalists in the fields of humanities, social science and education in the 1980’s and 1990’s This doctoral thesis analyses how generalist graduates of master’s degree have attached to the labour market in two different time periods, and how their career paths in the first eight years following graduation have shaped up. The thesis also analyses the channels of employment through which the generalists have got employed in their early career path. By generalists I am referring to graduates of studies in academic fields which have not qualified the person in a specific profession but rather offered a more general readiness for working life. I address two groups of generalist master’s degree graduates of The University of Turku; one including graduates of the year 1985 and the other consisting of graduates of 1995. All subjects have graduated in the field of humanities, social studies or education. 71 respondents from the group of 1985 and 80 respondents from the group of 1995 answered a survey, which provided the data for the thesis. I interpret the data through the theoretical approaches of changing working life, model of normal employment, transitional labour markets, linear life path, overlapping life courses, hidden labour market and social capital. The conclusion of the thesis is that societal era is connected with employment and career paths of academic generalists. Between the two groups there were differences especially in attachment to labor market, in forms of employment (permanent full-time job vs. temporary job) and in employment channels. Compared to the situation the 1985 group had been in after their graduation, the 1995 group - after getting their degree - became more often unemployed and/or employed in duties below their level of education. Their mobility was also greater and their contracts were often temporary, whereas the graduates of 1985 had been employed in more permanent positions. I demonstrate that the career paths of generalists can be categorized in five career types: steady state, transitory, linear, unsteady and diverging career. Graduates of 1985 have been treading on more stable paths than the latter group. The channels of employment they used were roughly equally divided between formal (e.g. newspaper advertisement and employment office) and informal (e.g. personal contacts and unprompted search for work) channels, whereas amongst the 1995 group employment happened through more varied channels and mostly through informal channels. Regardless of their year of graduation the generalists’ careers had begun to evolve already while they were still in the university and had started working at the same time. The thesis displays how the model of normal employment has weakened and career paths have become unsteady as a consequence of temporary positions. What is also evident in employment when turning from the 1980’s towards the succeeding decade is the rise of significance of the hidden labour market and social capital.

Introducción técnica a la implementación de compresores y descompresores basados en los sistemas Huffman y Lempev-Ziv

Peer-reviewed

Cost Optimisation of Mobile Advertising Client Data Transfer

Data traffic caused by mobile advertising client software when it is communicating with the network server can be a pain point for many application developers who are considering advertising-funded application distribution, since the cost of the data transfer might scare their users away from using the applications. For the thesis project, a simulation environment was built to mimic the real client-server solution for measuring the data transfer over varying types of connections with different usage scenarios. For optimising data transfer, a few general-purpose compressors and XML-specific compressors were tried for compressing the XML data, and a few protocol optimisations were implemented. For optimising the cost, cache usage was improved and pre-loading was enhanced to use free connections to load the data. The data traffic structure and the various optimisations were analysed, and it was found that the cache usage and pre-loading should be enhanced and that the protocol should be changed, with report aggregation and compression using WBXML or gzip.