Estudo comparativo entre subestações ao tempo e subestações isoladas a gás

In this paper are compared two methods of deploying electrical substations, conventional type, when installed at open areas (Air Insulated Switchgear - AIS), and compact gas-insulated (Gas Insulated Switchgear - GIS) when installed inside buildings. With the expansion of urban centers, areas available for deployment of conventional substations become increasingly difficult to find in these locations. Also due to speculation in urban areas, it becomes feasible to install Gas Insulated Switchgear. This paper presents and evaluates criteria with advantages and disadvantages for application of the two methodologies, aiming to assist in decisionmaking moment of choice in deployment of Electric Power Substations in two scenarios. It is expected that at the end of this work, the criteria evaluated assist in this decision making

Produção de cerveja, utilizando méis de diferentes origens botânicas como adjuntos

This study aimed to produce beer, using different botanical origins of honeys (orange, eucalyptus and wild), as malt adjuncts, and their Physical-chemical and sensorial characterizations. The production was made with malt, water, hops and honey. All musts were adjusted to 12 Brix, and the concentration of honey in the formulation was 45% (based on the extract), except for the control (0%). The physical and chemical analysis were performed on malt (extract content), honey (pH, free acidity, lactonic acidity, total acidity, color, turbidity, extract content, moisture content, reducing sugar, total reducing sugar and sucrose) in wort (content extract, pH, color, turbidity, fermentability ,bitterness and total acidity) and beer apparent extract, apparent fermentability, real extract, real fermentability, alcohol content, pH, total acidity, total foam, foam density , bitterness, carbon dioxide, color and turbidity). Sensory analysis was performed by nine-points hedonic scale testing. The attributes evaluated were appearance, aroma, flavor and overall. The results were submitted to ANOVA and means compared by Tukey testing at a 5% of probability. Beer with honey as adjuncts’ had high fermentability and low content of fat, compared to the pure malt beer. The addition of honey as an adjunct did not affect the majority of the physical-chemical parameters, except for turbidity, whereas beer with honey showed the highest value for this feature, in addition, it has also presented their biterness differences the values for beer with honey were lower. The different types of honeys did not affect the acceptability of beer, however, the beer with honey showed greater acceptance between beer with malt and honey

Um estudo sobre aspectos da gestão dos resíduos sólidos no município de Ribeirão Preto (SP)

Since the beginning of it’s existence the humankind coexists with the production of waste, both organics and inorganics. Over the years the world population is raising, and consequently the different kinds of waste, causing significant problems not only for the public authorities, but also for the population, not only those related with its final or temporary destination but also with its crescent production. Considering it, the cities are not able to handle there volumes, and its landfills and dumps are working over their capacities, leading to a serie of environmental problems due to the lost of environmental quality and the natural and social vulnerabilities arising. This paper plans to working over visits, photographic registration and a review on the theme literature, study the perception and valuation of the landscape on the Ribeirão Preto landfill, São Paulo state (SP), that today is disabled but still an area of risk and environmental vulnerability, well as the perception of environmental quality in the surrounding population

O advento de novas matrizes energéticas no Brasil: experiências da implantação do PNPB em Mirante do Paranapanema e a produção de biodiesel em Mauá, Estado de São Paulo

Faced with the global discussion about the development of new alternative energy sources, this work tries to contribute to the understanding of the introduction of biodiesel in the energy market, identifying the barriers in the social logic, economic and productive in different spaces, rural and urban. Based on the guidelines of the National Biodiesel Production and Use Program (PNPB), it intended to accompany the implementation of public policies in relation to family farmers settled in the Pontal, located in the western region of São Paulo. In parallel, we will analyze the organizational structure and logistics of the production of biodiesel in the city, although it does not dependent on agricultural production and it is not a target of public policies, it takes advantage of the demand created by PNPB when it comes to increasing the amount of biodiesel blended with mineral origin diesel. The activity examined in the urban space is the collection of used frying oil held by Ecosanta Biofuels, a company located in the town of Maua, São Paulo metropolitan region. The monograph aims to broaden our understanding despite the urban-rural issue regarding the obstacles and opportunities in expanding renewable energy

Estudos de degradação de filmes de polietileno

A produção de lixo pela humanidade é inevitável, porém, o destino dos residuos sólidos e seu acondicionamento inadequado têm trazido graves problemas ambientais. Dentre os resíduos sólidos, os plásticos merecem destaque, pois cresceram significativamente em uso e descarte, totalizando 20% do volume mundial de lixo. Isto decorre de algumas das propriedades destes materiais, como durabilidade, resistência, leveza e baixo custo de produção. Nas grandes cidades brasileiras, 7% do lixo produzido correspondem a produtos de plástico em filme, geralmente usado em aplicações de curta duração, como o polietileno. Este material persiste no ambiente por décadas, sendo, portanto, resistente à degradação. Diversos destinos podem ser tomados pelo resíduo de polietileno descartado, como a deposição em lixões e aterros sanitários, incineração, reciclagem e biodegradação. A biodegradação pode ser definida como a degradação catalisada por atividade biológica, levando, no final do processo, à mineralização e/ou formação de biomassa. Na natureza, a destruição destes materiais se dá, na verdade, por meio da “degradação ambiental”, na qual atuam sinergeticamente a biodegradação, a fotooxidação, a termo-oxidação e a hidrólise. Neste sentido, desde os anos 1970, diferentes formulações foram propostas para otimizar a susceptibilidade do PE à degradação ambiental. Sabe-se que o PE está sujeito a sofrer mudanças quando exposto à luz ultravioleta e/ou ao calor, e que estas modificações podem alterar a resposta dos microrganismos no processo de biodegradação. Desta forma, este estudo analisou as modificações ocasionadas por tratamentos com luz ultravioleta, calor e exposição ao sol, bem como a resposta da microbiota natural do solo a estes tratamentos, através de análises de espectroscopia... (Resumo completo, clicar acesso eletrônico abaixo)

Produção de hidrogênio por reforma a vapor de biogás

A new approach to generating clean energy has been studied by several researchers, among which one can highlight the steam reforming of biogas. The Biogas is result of decomposition of organic matter and it hasn’t been availed in the global level, instead, the biogas has been burned in flare or discarded into the atmosphere providing damage to the environment. The generation of vector biogas energy can be realized through its steam reforming and this work examines briefly the types of digesters used for biogas generation, studying the process of steam reforming to generate hydrogen as energy vector, analyzing each step in detail, seeking to adapt its main features an ethanol reformer for a biogas reformer. Besides this it is estimated the yield of the reform process and the boiler efficiency for efficiency of the process

Análise das emissões de gases do efeito estufa na produção do milho através da fertilização por resíduos de biocombustível. Estudo de caso : Dedelow - Brandemburgo - Alemanha

The focus of this research study were gas exchange between soil and atmosphere of nitrous oxide (N2O) between different fertilization treatments Corn The research, conducted in the experimental field Dedelow - Brandenburg / Germany, analyzed three different fertilization treatments, aiming to quantify GHE emissions, to identify the influence of the residue of biogas in the release of these gases process in agricultural soils in search for a solution fertilization less harmful to the environment and the greenhouse effect , based on the comparison of three treatments: organic fertilization, mineral fertilization and no fertilization. It was found through the analysis of the measurements that the first was the one which issued N2O, showing that even though coming from the residue of biogas , when returned to the soil, it becomes harmful to the environment and global warming . The cultivation of energy crops can lower or raise the emissions of greenhouse gases, so it is necessary for further research on this question not only in Germany , where such research is in continuity, but also in Brazil, a pioneer in the introduction to his energy matrix of a biofuel produced from cane sugar

Aspectos técnicos e ambientais da incorporação de novas tecnologias no setor sucroalcooleiro: produção de hidrogênio e gaseificação do bagaço

The purpose of this work is to study the incorporation of hydrogen production (Case A) and the process of gasification of sugarcane bagasse associated with combined cycle gas turbine and steam turbine (Case B) for Distillery Pioneers process. These technologies can be used to improve the energy supply in the sugarcane mill. Initially the processes for obtaining sugar and ethanol from sugarcane is discussed, with a theoretical introduction to hydrogen, the process of steam reforming and gasification of biomass (bagasse) by inserting a turbine associated with the recovery boiler gas. Subsequently makes up the energy and exergy analysis of the incorporation of the above technologies. In end stage makes it an ecological analysis considering or not the carbon cycle (photosynthesis), to determine the levels of emissions of pollutants, carbon dioxide equivalent, indicators of pollution and ecological efficiencies associated with technological developments proposed. It is concluded that hydrogen production by steam reforming of ethanol and gasification of bagasse are viable alternatives from the point of view of technical and environmental applications in the biofuels industry, contributing to the development of the sector in the country

Seletividade de herbicidas em mudas pré-brotadas de cana-de-açúcar

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Campylobacter sp como perigo biológico na produção de peito de frango maturado

Pós-graduação em Microbiologia Agropecuária - FCAV

Enzimas de biotransformação em tilápia (Oreochromis niloticus) exposta ao hormônio natural 17b-estradiol

Among the sexual hormones the estrogens are receiving major attention due to their biological activity. Such biological response is atributed to the best conformation recognized by their receptors, resulting in maximum responses. The estrogens are also considered responsible for most of disruptor´s effects caused by their presence in aquatic ecosystems. The 17β-estradiol hormone is produced by vertebrates during the reproductive phase of their lives and its presence has been detected in superficial waters. The objective of this study was to evaluate the cause-effect of tilapia exposition to the hormone 17β-estradiol through the analysis of biotransformation enzymes in liver and gills, complemented with the quantification of 17β-estradiol and estrone in water samples collected from fish ponds integrated to swine production. The present study was conducted under laboratory conditions, in a randomized experimental design with three levels of 17β-estradiol (E2) (0, 5, 15 µg L-1), with three replicates. After 7 days of exposure time, liver and gills were extracted to analyze three isoforms of cytochrome P450: EROD, BROD, PROD and the activity of Glutathione S-Transferase (GST). The results showed that the EROD activity (CYP1A), normally induced by the metabolism of aromatic compounds, did not present statistical differences among the treatments exposed to E2, what means that the hormone did not induce isoform 1A in fish under these particular experimental conditions. PROD activity was significantly altered in both concentrations, by means of 5 and 15 µg L-1, when compared to control. This result can indicate an important role of PROD on the metabolism of E2 present in water. Regarding to the BROD activity, it could be observed differences statistically significant between control and both groups of treatments. Two or more CYP isoforms can contribute to the metabolism of the same compound, what makes BROD a candidate as a next bioindicator of the exposure to E2 in aquatic ecosystems. Analysis of variance could confirm the effect of E2 statistically significant on the GST activity in liver tissues with >90% of significance (Prob>F = 0.0753). Furthermore, it was possible to observe that the values of GSTs activities in liver and gills in both, control and treatments, follow a tendency, that means, enzymatic activity in gills increase as the increasing of the activity in the liver tissues. In this study, the 17β–estradiol was found in measurable concentrations in three sampled points, and these values were similar to the findings of other authors at different locations in Brazil. In addition, those values are much higher than the minimum concentration that presented observable effects (10 ng L-1).

Incorporação de novas tecnologias no setor sucroalcooleiro: produção de hidrogênio e aumento da oferta de eletricidade

This work studies the incorporation of new technologies in the sugarcane sector. Are considered the ethanol steam reforming and the gasification of sugarcane bagasse(by-product) processes associated with combined cycle systems (Gas Turbine + Steam Turbine), aggregating hydrogen production and increased electricity supply in the sector, respectively. To verify the technical feasibility of the incorporation processes was performed a thermodynamic analysis, considering data from a typical Brazilian Sugar Cane Industry. In another step the economic viability study of the hydrogen production process was made, with consideration on hydrated and anhydrous ethanol steam reform, comparing the cost of hydrogen production. Also considered studies of economic engineering of the gasification process and the generation of electricity associated. As conclusions, it follows that the ethanol steam reforming is a great alternative for hydrogen production, presenting production cost relatively low, especially when is considered the steam reforming of hydrated ethanol. For the gasification process associated with combined cycle, can be observed an increase of 8.56 times of the electricity production in the sugar cane industry, indicating a positive annual saving when the sales price of the supply electricity is greater than 0.070 US$/kWh. Finally it can be concluded that the incorporation of these new processes allow greater profitability and operational flexibility of Brazilian sugarcane mills

Consumo da sustentabilidade: a mercantilização da crise ambiental e a apropriação do discurso ecológico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Uma análise das estratégias de manufatura adotadas por seis montadoras da indústria automobilística mundial

The Brazilian automotive industry has undergone profound changes during the 90’s decade, as a consequence of the market opening up through the liberation of automobile imports. The exposure of the Brazilian domestic market to competition with imported products of high quality and lower prices indicated the need for significant changes in those auto industries operating in this country, with the intention of making them competitive. To achieve these objectives management and production concepts were adopted, such as: the just-in-time philosophy; lean manufacturing; outsourcing; reengineering and increasing the rate of automation in both production and management systems. These changes helped to increase productivity and, in turn, reduced the level of employment in the sector, especially in activities where the required qualification levels were low. Despite this modernization, the Brazilian companies have committed themselves to meet the specific needs of the Brazilian market. The objective of this paper is to analyze and present manufacturing strategies from six manufacturers of automotive vehicles: Toyota in Japan, Fiat in Italy, Volkswagen in Brazil and Germany and General Motors in the U.S. and Brazil. The predominant method of research was from reviewing relevant literature, whereas the empirical data was analyzed qualitatively. The article seeks to identify the manufacturing strategies adopted by manufacturers located in the above countries, electing one automotive manufacturer to represent each country. The research demonstrated that the processes for production of automobiles in four plants located in, the U.S. (GM); Italy (Fiat); Japan (Toyota) and Germany (VW) are similar to those adopted in Brazilian industrial plants of the same companies (GM and VW), with differences of operations only in the business strategies adopted by each of them.

Ergonomia e design de vestimentas ocupacionais no Brasil: foco em equipamentos de proteção individual no setor de petróleo e gás

Pós-graduação em Design - FAAC