The occurrence and dissemination of methicillin and vancomycin-resistant Staphylococcus in samples from patients and health professionals of a university hospital in Recife, State of Pernambuco, Brazil

Introduction Methicillin-resistant Staphylococcus aureus (MRSA) strains have been responsible for many nosocomial outbreaks. Within hospitals, colonized employees often act as reservoirs for the spread of this organism. This study collected clinical samples of 91 patients admitted to the intensive care unit (ICU), hemodialysis/nephrology service and surgical clinic, and biological samples from the nasal cavities of 120 professionals working in those environments, of a University Hospital in Recife, in the State of Pernambuco, Brazil. The main objective of this study was to determine the occurrence and dissemination of methicillin- and vancomycin-resistant Staphylococcus spp. Methods The isolates obtained were tested for susceptibility to oxacillin and vancomycin and detection of the mecA gene. In addition, the isolates were evaluated for the presence of clones by ribotyping-polymerase chain reaction (PCR). Results MRSA occurrence, as detected by the presence of the mecA gene, was more prevalent among nursing technicians; 48.1% (13/27) and 40.7% (11/27) of the isolates were from health professionals of the surgical clinic. In patients, the most frequent occurrence of mecA-positive isolates was among the samples from catheter tips (33.3%; 3/9), obtained mostly from the hemodialysis/nephrology service. Eight vancomycin-resistant strains were found among the MRSA isolates through vancomycin screening. Based on the amplification patterns, 17 ribotypes were identified, with some distributed between patients and professionals. Conclusions Despite the great diversity of clones, which makes it difficult to trace the source of the infection, knowledge of the molecular and phenotypic profiles of Staphylococcus samples can contribute towards guiding therapeutic approaches in the treatment and control of nosocomial infections.

Impact of insecticide resistance on the field control of Aedes aegypti in the State of São Paulo

IntroductionThe need to control dengue transmission by means of insecticides has led to the development of resistance to most of the products used worldwide against mosquitoes. In the State of São Paulo, the Superintendência de Controle de Endemias(SUCEN) has annually monitored the susceptibility of Aedes aegypti to insecticides since 1996; since 1999, surveys were conducted in collaboration with the National Network of Laboratories (MoReNAa Network) and were coordinated by the Ministry of Health. In this study, in addition to the biological characterization of insecticide resistance in the laboratory, the impact of resistance on field control was evaluated for vector populations that showed resistance in laboratory assays.MethodsField efficacy tests with larvicides and adulticides were performed over a 13-year period, using World Health Organization protocols.ResultsData from the field tests showed a reduction in the residual effect of temephos on populations with a resistance ratio of 3. For adults, field control was less effective in populations characterized as resistant in laboratory qualitative assays, and this was confirmed using qualitative assays and field evaluation.ConclusionsOur results indicated that management of resistance development needs to be adopted when insect populations show reduced susceptibility. The use of insecticides is a self-limiting tool that needs to be applied cautiously, and dengue control requires more sustainable strategies.

Evaluation of constitutive and inducible resistance to clindamycin in clinical samples of Staphylococcus aureus from a tertiary hospital

IntroductionInfections caused by methicillin-resistant Staphylococcus aureus (MRSA) have become common in hospitals and the community environment, and this wide resistance has limited patient treatment. Clindamycin (CL) represents an important alternative therapy for infections caused by S. aureus. Antimicrobial susceptibility testing using standard methods may not detect inducible CL resistance. This study was performed to detect the phenotypes of resistance to macrolides-lincosamides-streptogramin B (MLSB) antibiotics, including CL, in clinical samples of S. aureusfrom patients at a tertiary hospital in Santa Maria, State of Rio Grande do Sul, Brazil.MethodsOne hundred and forty clinical isolates were submitted to the disk diffusion induction test (D-test) with an erythromycin (ER) disk positioned at a distance of 20mm from a CL disk. The results were interpreted according to the recommendations of the Clinical and Laboratory Standards Institute (CLSI).ResultsIn this study, 29 (20.7%) of the 140 S. aureus samples were resistant to methicillin (MRSA), and 111 (79.3%) were susceptible to methicillin (MSSA). The constitutive resistance phenotype (cMLSB) was observed in 20 (14.3%) MRSA samples and in 5 (3.6%) MSSA samples, whereas the inducible resistance phenotype (iMLSB) was observed in 3 (2.1%) MRSA samples and in 8 (5.8%) MSSA samples.ConclusionsThe D-test is essential for detecting the iMLSBphenotype because the early identification of this phenotype allows clinicians to choose an appropriate treatment for patients. Furthermore, this test is simple, easy to perform and inexpensive.

Distribution of extended-spectrum β-lactamase types in a Brazilian tertiary hospital

INTRODUCTION: Epidemiological data on the prevalence of extended-spectrum β-lactamases (ESBLs) are scarce in Brazil despite the fact that these data are essential for empirical treatment and control measures. The objective of this study was to evaluate the prevalence of different ESBLs by type and distribution in a tertiary hospital in southern Brazil. METHODS: We evaluated 1,827 enterobacterial isolates between August 2003 and March 2008 isolated from patients at a tertiary hospital. Samples were identified using a Vitek automated system and were confirmed by biochemical testing. The identified ESBL strains were characterized by phenotypic methods, polymerase chain reaction (PCR), and sequencing. Genetic similarities were evaluated by pulsed-field gel electrophoresis. RESULTS: It was 390 (21.3%) ESBL-producing strains, which expressed the ESBLs CTX-M (292), SHV (84), CTX and SHV (10), TEM (2), and PER (2). CONCLUSIONS: The prevalence of ESBL-expressing strains was high, especially in Klebsiella pneumoniae and Enterobacter spp. CTX-M was the predominant type of ESBL observed, and its genetic variability indicates a polyclonal distribution.

Susceptibility of Triatoma sordida Stal, 1859 (Hemiptera: Reduviidae) to alpha-cypermethrin under natural climatic conditions

Abstract:INTRODUCTION:Despite the recommendations by interpretation of resistance ratios obtained in laboratory bioassays, little is known about the actual impact of these results in the effectiveness of vector control activities in the field. In this context, our objective was to determine the mean value of different resistance ratios obtained by laboratory bioassays performed as part of the chemical control strategies of Triatoma sordida in the field.METHODS:Field bioassays were developed in Monte Azul and Coração de Jesus (Southeast, Brazil). In each location, samples were formed with three domestic units treated with alpha-cypermethrin 20.0% (Alfatek (r) 200 SC). One day after spraying, 10 fifth-instar nymphs remained in contact with the surfaces treated (adobe with plaster, adobe without plaster, or wood) with insecticide in plastic cones for 72h. Three cones were exposed inside the intradomicile and the peridomicile. The insects in the control group were exposed to an insecticide-free piece of cardboard. Mortality was measured 72h after removal of the insects from the treated surfaces. The tests were realized in triplicate.RESULTS:Mortality was 100.0% in all locations, except for Monte Azul; Landinho (96.6%) and Coração de Jesus; Barriguda (96.6%).CONCLUSIONS:Although the resistant populations in laboratory tests proved to be susceptible in the field, this observation is not sufficient to suggest that the cut-off points used to justify the resistance ratio should be changed. In this sense, we recommend that laboratory and field bioassays are carried out with a greater number of Triatominae populations to allow more in-depth consideration of the subject.

Molecular identification and antifungal susceptibility profiles of Candida parapsilosis complex species isolated from culture collection of clinical samples

AbstractINTRODUCTION:Candida parapsilosis is a common yeast species found in cases of onychomycosis and candidemia associated with infected intravascular devices. In this study, we differentiated Candida parapsilosis sensu stricto, Candida orthopsilosis , and Candida metapsilosis from a culture collection containing blood and subungual scraping samples. Furthermore, we assessed the in vitro antifungal susceptibility of these species to fluconazole, itraconazole, voriconazole, posaconazole, amphotericin B, and caspofungin.METHODS:Differentiation of C. parapsilosis complex species was performed by amplification of the secondary alcohol dehydrogenase (SADH) gene and digestion by the restriction enzyme Ban I. All isolates were evaluated for the determination of minimal inhibitory concentrations using Etest, a method for antifungal susceptibility testing.RESULTS:Among the 87 isolates, 78 (89.7%) were identified as C. parapsilosis sensu stricto , five (5.7%) were identified as C. orthopsilosis , and four (4.6%) were identified as C. metapsilosis . Analysis of antifungal susceptibility showed that C. parapsilosis sensu strictoisolates were less susceptible to amphotericin B and itraconazole. One C. parapsilosis sensu stricto isolate was resistant to amphotericin B and itraconazole. Moreover, 10.2% of C. parapsilosis sensu stricto isolates were resistant to caspofungin. Two C. parapsilosis sensu strictoisolates and one C. metapsilosis isolate were susceptible to fluconazole in a dose-dependent manner.CONCLUSIONS:We reported the first molecular identification of C. parapsilosiscomplex species in State of Goiás, Brazil. Additionally, we showed that although the three species exhibited differences in antifungal susceptibility profiles, the primary susceptibility of this species was to caspofungin.

Aedes aegypti eggs oviposited on water surface collected from field ovitraps in Nova Iguaçu City, Brazil

ABSTRACT INTRODUCTION: Aedes aegypti eggs can be collected from the water surface. METHODS: Aedes aegypti oviposition from 97 field ovitraps was studied. RESULTS: Of the 16,016 eggs collected, 11,439 were obtained from paddles in ovitraps and 4,577 from water. Further, 89 (91.8%) traps contained eggs on water and 22 (22.7%) traps contained eggs only on water. CONCLUSIONS: In field traps, Aedes aegypti females usually oviposit some eggs on water surface suggesting that they might also oviposit on water of some natural breeding, and this possibility needs to be investigated. Eggs oviposited on water need to be considered for collecting trap data.

Field-effect transistors based on Zinc oxide nanoparticles

This work reports the development of field-effect transistors (FETs), whose channel is based on zinc oxide (ZnO) nanoparticles (NPs). Using screen-printing as the primary deposition technique, different inks were developed, where the semiconducting ink is based on a ZnO NPs dispersion in ethyl cellulose (EC). These inks were used to print electrolyte-gated transistors (EGTs) in a staggered-top gate structure on glass substrates, using a lithium-based polymeric electrolyte. In another approach, FETs with a staggered-bottom gate structure on paper were developed using a sol-gel method to functionalize the paper’s surface with ZnO NPs, using zinc acetate dihydrate (ZnC4H6O4·2H2O) and sodium hydroxide (NaOH) as precursors. In this case, the paper itself was used as dielectric. The various layers of the two devices were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier Transform Infrared spectroscopy (FTIR), thermogravimetric and differential scanning calorimetric analyses (TG-DSC). Electrochemical impedance spectroscopy (EIS) was used in order to evaluate the electric double-layer (EDL) formation, in the case of the EGTs. The ZnO NPs EGTs present electrical modulation for annealing temperatures equal or superior to 300 ºC and in terms of electrical properties they showed On/Off ratios in the order of 103, saturation mobilities (μSat) of 1.49x10-1 cm2(Vs)-1 and transconductance (gm) of 10-5 S. On the other hand, the ZnO NPs FETs on paper exhibited On/Off ratios in the order of 102, μSat of 4.83x10- 3 cm2(Vs)-1and gm around 10-8 S.

Sperm tail flexibility test: a simple test for selecting viable spermatozoa for intracytoplasmic sperm injection from semen samples without motile spermatozoa

PURPOSE: The objective was to describe the results of the injection of immotile spermatozoa with flexible tails when only immotile spermatozoa are present in the semen sample. METHODS: A retrospective study was conducted to analyze the procedure results for 10 couples who participated in our intracytoplasmic sperm injection program. The sperm tail was considered flexible when it moved up and down independently of the head movement, and it was considered inflexible when the movement occurred together (tail plus head). The fertilization and pregnancy rate were analyzed. RESULTS: The normal fertilization rate (presence of 2 pronuclei) was 30.3% (40/132), and the abnormal fertilization rate (presence of less than or more than 2 pronuclei) was 6.81% (9/132). A total of 52 embryos were obtained with 9 transfer procedures performed (pregnancy rate: 11.12%). CONCLUSIONS: The sperm tail flexibility test (STFT) is an easy and cost-effective way for selecting viable immotile spermatozoa and can be used as an alternative method for determining the viability of spermatozoa. This test seems to be a simple and risk-free method when compared to the swelling test.

Methodology for WSN communication technologies automated field tests

Wireless Sensor Networks(WSN) are networks of devices used to sense and act that applies wireless radios to communicate. To achieve a successful implementation of a wireless device it is necessary to take in consideration the existence of a wide variety of radios available, a large number of communication parameters (payload, duty cycle, etc.) and environmental conditions that may affect the device’s behaviour. However, to evaluate a specific radio towards a unique application it might be necessary to conduct trial experiments, with such a vast amount of devices, communication parameters and environmental conditions to take into consideration the number of trial cases generated can be surprisingly high. Thus, making trial experiments to achieve manual validation of wireless communication technologies becomes unsuitable due to the existence of a high number of trial cases on the field. To overcome this technological issue an automated test methodology was introduced, presenting the possibility to acquire data regarding the device’s behaviour when testing several technologies and parameters that care for a specific analysis. Therefore, this method advances the validation and analysis process of the wireless radios and allows the validation to be done without the need of specific and in depth knowledge about wireless devices.

FPGA field oriented control of an axial flux motor-in-wheel

This paper presents the design and the prototype implementation of a three-phase power inverter developed to drive a motor-in-wheel. The control system is implemented in a FPGA (Field Programmable Gate Array) device. The paper describes the Field Oriented Control (FOC) algorithm and the Space Vector Modulation (SVM) technique that were implemented. The control platform uses a Spartan-3E FPGA board, programmed with Verilog language. Simulation and experimental results are presented to validate the developed system operation under different load conditions. Finally are presented conclusions based on the experimental results.

Field oriented control of an axial flux permanent magnet synchronous motor for traction solutions

Electric Vehicles (EVs) are increasingly used nowadays, and different powertrain solutions can be adopted. This paper describes the control system of an axial flux Permanent Magnet Synchronous Motor (PMSM) for EVs powertrain. It is described the implemented Field Oriented Control (FOC) algorithm and the Space Vector Modulation (SVM) technique. Also, the mathematical model of the PMSM is presented. Both, simulation and experimental, results with different types of mechanical load are presented. The experimental results were obtained using a laboratory test bench. The obtained results are discussed.

The potential field method and the nonlinear attractor dynamics approach: what are the differences?

One of the most popular approaches to path planning and control is the potential field method. This method is particularly attractive because it is suitable for on-line feedback control. In this approach the gradient of a potential field is used to generate the robot's trajectory. Thus, the path is generated by the transient solutions of a dynamical system. On the other hand, in the nonlinear attractor dynamic approach the path is generated by a sequence of attractor solutions. This way the transient solutions of the potential field method are replaced by a sequence of attractor solutions (i.e., asymptotically stable states) of a dynamical system. We discuss at a theoretical level some of the main differences of these two approaches.

Diurnal variability of rainfall in southwest Amazonia during the LBA-TRMM field campaign of the austral summer of 1999

The TRMM-LBA field campaign was held during the austral summer of 1999 in southwestern Amazonia. Among the major objectives, was the identification and description of the diurnal variability of rainfall in the region, associated with the different rain producing weather systems that occurred during the January-February season. By using a network of 40 digital rain gauges implemented in the state of Rondônia, and together with observations and analyses of circulation and convection, it was possible to identify details of the diurnal cycle of rainfall and the associated rainfall mechanisms. Rainfall episodes were characterized by regimes of "low-level easterly" and "westerly" winds in the context of the large-scale circulation. The westerly regime is related to an enhanced South Atlantic Convergence Zone (SACZ) and an intense and/or wide Low Level Jet (LLJ) east of the Andes, which can extend eastward towards Rondônia, even though some westerly regime episodes also show a LLJ that remains close to the foothill of the Andes. The easterly regime is related to easterly propagating systems (e.g. squall-lines) with possible weakened or less frequent LLJs and a suppressed SACZ. Diurnal variability of rainfall during westerly surface wind regime shows a characteristic maximum at late afternoon followed by a relatively weaker second maximum at early evening (2100 Local Standard Time LST). The easterly regime composite shows an early morning maximum followed by an even stronger maximum in the afternoon.