956 resultados para Fetal Viability


Relevância:

20.00% 20.00%

Publicador:

Resumo:

In conservation agriculture, mainly under direct seeding, maintaining the vegetation ground cover is essential, since this serves as a reservoir of nutrients which are slowly released to plants by microorganisms. Some authors have sought to study increases in the amount of straw in the soil, in addition to slowing down the process of decomposition, with hormesis being one of the techniques used. This technique states that all chemical substances are both poisonous and nonpoisonous, with only the dosage determining whether they are lethal or not. This study aimed to evaluate the dry weight and agronomic characteristics of a crop of black oat subjected to hormesis. The experimental design was of randomised blocks, with 12 treatments and 4 replications, giving a total of 48 experimental lots. The treatments were: Haloxyfop-R Methyl Ester at dosages of 0.625, 1.25 and 2.50 g ha(-1); Glyphosate at dosages of 12.50, 25.00 and 50.00 g ha-1; 2,4-D dimethylamine salt at dosages of 100.00, 200.00 and 300.00 g ha(-1); Alterbane at a dosage of 500.00 g ha(-1); Salicylic acid at a dose of 100 g ha(-1); and a control. It was concluded that for the subdosages under test, the herbicides 2,4-D at medium dosage and Verdict at low dosage were shown to be the best treatments for conserving straw as ground cover under direct seeding.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pregnancy establishment, followed by birth of live offspring, is essential to all mammals. The biological processes leading up to pregnancy establishment, maintenance, and birth are complex and dependent on the coordinated timing of a series of events at the molecular, cellular, and physiological level. The ability to ovulate a competent oocyte, which is capable of undergoing fertilization, is only the initial step in achieving a successful pregnancy. Once fertilization has occurred and early embryonic development is initiated, early pregnancy detection is critical to provide proper prenatal care (humans) or appropriate management (domestic livestock). However, the simple presence of an embryo, early in gestation, does not guarantee the birth of a live offspring. Pregnancy loss (embryonic mortality, spontaneous abortions, etc.) has been well documented in all mammals, especially in humans and domestic livestock species, and is a major cause of reproductive loss. It has been estimated that only about 25-30 % of all fertilized oocytes in humans result in birth of a live offspring; however, identifying the embryos that will not survive to parturition has not been an easy task. Therefore, investigators have focused the identification of products in maternal circulation that permit the detection of an embryo and assessment of its well-being. This review will focus on the advances in predicting embryonic presence and viability, in vivo.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Broilers are known as an efficient source of lean meat. Genetic selection resulted in broiler strains with large body size and fast growth, but a concomitant increase in fat deposition also occurred. Other than reducing nutrient intake, there is a lack of alternative methods to control body fat composition of broilers. The present study assessed whether incubation temperature (machine temperatures: 36ºC, 37.5ºC, and 39ºC; eggshell temperatures: 37.4 ± 0.08°C, 37.8 ± 0.15ºC, and 38.8 ± 0.33°C, respectively.) from d 13 affects broiler hatchling fat deposition. We analyzed adipocyte hypertrophy and proliferation in 3 body regions; weight and chemical composition of yolk-free chicks and yolk sacs; and serum lipid profile. Increased incubation temperature reduced abdominal and cervical adipocyte size. Independently of temperature, cervical adipocytes were smaller and showed higher proliferation than adipocytes in the abdominal and thigh regions. Smaller cervical adipocytes were observed in birds from eggs incubated at 36ºC and 39ºC. With regard to weight and composition of chicks, ash content as a percentage of dry matter was the only variable affected by temperature; it was higher in chicks from eggs incubated at 36ºC than at 39ºC and showed no significant difference between chicks incubated at 39ºC and 37.5ºC. Absolute and relative weights of yolk sacs were higher from eggs incubated at 39ºC than at 36ºC, and these two treatments did not differ from the 37.5ºC control. Absolute measures of yolk sac lipids, moisture, dry matter, and crude protein content were lower in chicks from eggs incubated at 36ºC, and no significant differences were found for these variables between chicks from eggs incubated at 37.5ºC and 39ºC. Hatchlings from eggs incubated at 36°C had significantly higher cholesterol levels than chicks incubated at the other 2 temperatures, but no additional effects on blood lipids were detected. Incubation temperature manipulation during fetal development altered cervical and abdominal adipocyte size in broiler hatchlings and could become a tool in hatcheries to manipulate chick quality, although further studies are needed to evaluate its long-term effects.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The effect of inulin and/or okara flour on Lactobacillus acidophilus La-5 and Bifidobacterium animalis Bb-12 viability in a fermented soy product (FSP) and on probiotic survival under in vitro simulated gastrointestinal conditions were investigated throughout 28 days of storage at 4 °C. Employing a 22 design, four FSP trials were produced from soymilk fermented with ABT-4 culture (La-5, Bb-12, and Streptococcus thermophilus): FSP (control); FSP-I (with inulin, 3 g/100 mL of soymilk); FSP-O (with okara, 5 g/100 mL); FSP-IO (with inulin + okara, ratio 3:5 g/100 mL). Probiotic viabilities ranged from 8 to 9 log cfu/g during the 28 days of storage, and inulin and/or okara flour did not affect the viability of La-5 and Bb-12. Bb-12 resistance to the artificial gastrointestinal juices was higher than for La-5, since the Bb-12 and La-5 populations decreased approximately 0.6 log cfu/g and 3.8 log cfu/g, respectively, throughout storage period. Even though the protective effect of inulin and/or okara flour on probiotic microorganisms was not significant, when compared to a fresh culture, the FSP matrix improved Bb-12 survival on day 1 of storage and may be considered a good vehicle for Bb-12 and could play an important role in probiotic protection against gastrointestinal juices. © 2013 Elsevier Ltd.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work aimed to analyze clinically and histologically the allogen bone graft behavior at 6 and 9 months. A leukoderm, female, 55 years old patient sought dental care for oral rehabilitation with dental implants and implant supported fixed prosthesis in the maxilla. Bilateral sinus lifting procedure were performed in a same patient, the analysis were made after 6 and 9 months, respectively. At 6 months, there was lack of a better bone remodeling in the region, associated to the presence of fibrous connective tissue within the collected tissue, showing us that this is not the best stage of tissue maturation to place dental implants. The 9 months period showed an improvement, with a more organized bone tissue surrounding particles of homogenous bone, what possibly had increased implant stability at the time of surgery. There is no doubt about the increase of clinical applications of FFBA, but there are no studies available regarding the standardization of time to load implants inserted in allografts. So papers with long-term monitoring are necessary to eliminate questions that still remain to be answered.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

With the currently strict environmental law in present days, researchers and industries are seeking to reduce the amount of cutting fluid used in machining. Minimum quantity lubrication is a potential alternative to reduce environmental impacts and overall process costs. This technique can substantially reduce cutting fluids in grinding, as well as provide better performance in relation to conventional cutting fluid application (abundant fluid flow). The present work aims to test the viability of minimum quantity lubrication (with and without water) in grinding of advanced ceramics, when compared to conventional method (abundant fluid flow). Measured output variables were grinding power, surface roughness, roundness errors and wheel wear, as well as scanning electron micrographs. The results show that minimum quantity lubrication with water (1:1) was superior to conventional lubrication-cooling in terms of surface quality, also reducing wheel wear, when compared to the other methods tested.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Trabalho apresentado na São Paulo Advanced School of Comparative Oncology, Águas de São Pedro, SP, 2012.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Elétrica - FEIS

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)