983 resultados para Feed: Gain ratio


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this research was to evaluate the effect of the citric acid concentration, pulp/sugar ratio, and albedo concentration of the passion fruit peel on physical, physiochemical, and sensorial characteristics of the 'Silver' banana preserves. A 2³ factorial design and 3 repetitions in the central point were used. The albedo concentration between 0 and 3% had significant influence on the reduction of the reducing sugars and on the decrease in titratable acidity. The increase in the pulp/sugar ratio exerted a negative effect on the pH and positive on the titratable acidity; the acid addition reduced the non-reducing sugar level. The sensorial evaluation and purchase intention indicated that the incorporation of a maximum of 1.5% albedo in formulations containing 50% pulp and 0.5% citric acid resulted in products with good acceptability in comparison with the formulation in which 60% pulp and an absence of acid or albedo is utilized.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The objective of this work was to study the effect of blanching and the influence of temperature, solution concentration, and the initial fruit:solution ratio on the osmotic dehydration of star-fruit slices. For blanching, different concentrations of citric and ascorbic acids were studied. The samples immersed in 0.75% citric acid presented little variation in color in relation to the fresh star-fruit. Osmotic dehydration was carried out in an incubator with orbital shaking, controlled temperature, and constant shaking at 120 rpm. The influence of process variables was studied in trials defined by a complete 23 central composite design. In general, water loss and solids gain were positively influenced by temperature and by solution concentration. Nevertheless, lower temperatures reduced water loss throughout the osmotic dehydration process. An increase in the amount of dehydrating solution (initial fruit:solution ratio) slightly influenced the evaluated responses. The process carried out at 50 ºC with a solution concentration of 50% resulted in a product with lower solids gain and greater water loss. Under these conditions, blanching minimized the effect of the osmotic treatment on star-fruit browning, and therefore the blanched fruits showed little variation in color in relation to the fresh fruit.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Antioxidants have the ability to neutralize free radicals produced in the body during lipid oxidation. The objective in this article was to study the effect of the barley extract on lipid oxidation in rats subjected to a high-fat diet. The experiment lasted 67 days. The animals were separated into three experimental groups: standard (P), high-fat diet group (L), and group with high-fat diet supplemented with barley extract (C). The feed intake of L and C groups was the lowest (p < 0.05). The treatments did not influence weight gain, organ weight, and the blood parameters measured. However, the levels of malondialdehyde present in the liver tissue were higher in the L group and lower in the P and C groups. Therefore, the results indicated an increased level of lipid peroxidation in the liver of rats subjected to high-fat diet, which was reduced by the consumption of barley.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this study, the morphological characteristics of cocoa beverage powder granules under minimal, average, and maximal process conditions of a steam agglomerator were studied. a stereoscopic microscope coupled to a digital camera was used for the morphological analysis. The images were analyzed to obtain shape and size descriptors. aiming to evaluate the descriptors, 150 particles were analyzed. The results showed that there was no difference between the shape descriptors - compacity, circularity, roughness, and aspect ratio - in the operating conditions evaluated. It was observed that the cocoa beverage powder granules are elongated in shape. The size descriptors, area, perimeter, perimeter of convex bounding polygon, minimal and maximal Feret diameter, were different in the process conditions for the granules of size above 600 μm. as for the minimal process conditions, especially due to low solid feed rates, there is an increase in the size descriptor values. In addition, under the minimum process conditions, in which there is low solid feed rate (400g/min) for a steam pressure of 1.0 bar, it was obtained a good granular condition with retention of 81.1% of granules on sieves with aperture size between 300 and 1190 μm.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The need for reduced intrinsic weight of structures and vehicles in the transportation industry has made aluminium research of interest. Aluminium has properties that are favourable for structural engineering, including good strength-to-weight ratio, corrosion resistance and machinability. It can be easily recycled saving energy used in smelting as compared to steel. Its alloys can have ultimate tensile strength of up to 750 MPa, which is comparable to steel. Aluminium alloys are generally weldable, however welding of high strength alloys like the 7xxx series pose considerable challenges. This paper presents research on the weldability of high strength aluminium alloys, principally the 7xxx series. The weldability with various weld processes including MIG, TIG, and FSW, is discussed in addition to consideration of joint types, weld defects and recommendations for minimizing or preventing weld defects. Experimental research was carried out on 7025-T6 and AW-7020 alloys. Samples were welded, and weld cross sections utilized in weld metallurgy studies. Mechanical tests were carried out including hardness tests and tensile tests. In addition, testing was done for the presence of Al2O3 on exposed aluminium alloy. It was observed that at constant weld heat input using a pulsed MIG system, the welding speed had little or no effect on the weld hardness. However, the grain size increased as the filler wire feed rate, welding current and welding speed increased. High heat input resulted in lower hardness of the weld profile. Weld preheating was detrimental to AW- 7020 welds; however, artificial aging was beneficial. Acceptable welds were attained with pulsed MIG without the removal of the Al2O3 layer prior to welding. The Al2O3 oxide layer was found to have different compositions in different aluminium alloys. These findings contribute useful additional information to the knowledge base of aluminium welding. The application of the findings of this study in welding will help reduce weld cost and improve high strength aluminium structure productivity by removing the need for pre-weld cleaning. Better understanding of aluminium weld metallurgy equips weld engineers with information for better aluminium weld design.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The cyanobacterium Synechococcus sp. PCC 7942 (Anacystis nidulans R2) adjusts its photosynthetic function by changing one of the polypeptides of photosystem II. This polypeptide, called Dl, is found in two forms in Synechococcus sp. PCC 7942. Changing the growth light conditions by increasing the light intensity to higher levels results in replacement of the original form of D 1 polypeptide, D 1: 1, with another form, D 1 :2. We investigated the role of these two polypeptides in two mutant strains, R2S2C3 (only Dl:l present) and R2Kl (only Dl:2 present) In cells with either high or low PSI/PSII. R2S2C3 cells had a lower amplitude for 77 K fluorescence emission at 695 nm than R2Kl cells. Picosecond fluorescence decay kinetics showed that R2S2C3 cells had shorter lifetimes than R2Kl cells. The lower yields and shorter lifetimes observed in the D 1 and Dl:2 containing cells. containing cells suggest that the presence of D 1: 1 results in more photochemical or non-photochemical quenching of excitation energy In PSII. One of the most likely mechanisms for the increased quenching in R2S2C3 cells could be an increased efficiency in the transfer of excitation energy from PSII to PSI. However, photophysical studies including 77 K fluorescence measurements and picosecond time resolved decay kinetics comparing low and high PSI/PSII cells did not support the hypothesis that D 1: 1 facilitates the dissipation of excess energy by energy transfer from PSII to PSI. In addition physiological studies of oxygen evolution measurements after photoinhibition treatments showed that the two mutant cells had no difference in their susceptibility to photoinhibition with either high PSI/PSII ratio or low PSI/PSII ratio. Again suggesting that, the energy transfer efficiency from PSII to PSI is likely not a factor in the differences between Dl:l and Dl:2 containing cells.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A review of the literature reveals that there are a number of children in the educational system who are characterized by Attention Deficit Disorder. Further review of the literature reveals that there are information processing programs which have had some success in increasing the learning of these children. Currently, an information processing program which is based on schema theory is being implemented in Lincoln County. Since schema theory based programs build structural, conditional, factual, and procedural schemata which assist the learner in attending to salient factors, learning should be increased. Thirty-four children were selected from a random sampling of Grade Seven classes in Lincoln County. Seventeen of these children were identified by the researcher and classroom teacher as being characterized by Attention Deficit Disorder. From the remaining population, 17 children who were not characterized by Attention Deficit Disorder were randomly selected. The data collected were compared using independent t-tests, paired t-tests, and correlation analysis. Significant differences were found in all cases. The Non-Attention Deficit Disorder children scored significantly higher on all the tests but the Attention Defici t Disorder children had a significantly higher ratio of gain between the pretests and posttests.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The original objective of this work was to provide a simple generator w.hich would produce hydrogen torLfuel-cell feed and which could be operated under remote or northern conditions. A secondary objective was to maximize the yield of hydrogen and carbon monoxide from available feed-stocks. A search of the patent literature has indicated that the concept of a small Wulff-type generator is essentially sound and that hydrogen may be recovered from a wide variety of hydrocarbon feed-stocks. A simple experimental set-up has been devised, patterned after ~~t originally used by R. G. Wulff for producing acetylene. This provides a supply of feed-stock, with or Without a carrier gas, which may be passed directly through a heated tube, which may contain a catalyst. A suitable procedure has been devised for analysi~ effluent gases for hydrogen, oxygen, nitrogen, methane and carbon monoxide by gas chromatography with the column packed with .Molecular .:>ieve .5 4. Athanol with air a.s carrier gas and at the same time as oxidant o was thermolyzed at temperatures in the ra~e 700-1100 C, with or Wi~lout catalyst. Methanol with or without nitrogen as a carrier gas was also cracked with • the same type of reactor refractory tube, but the temperature range was lower t down to ,300 " C when a catalyst was used. The problems of converting methane to hydrogen and carbon monoxide effiCiently, using air and/or water as oxidants were also studied.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The operational sex ratio has long been considered an important constraint on the structure of mating systems. The effects of an experimentally manipulated sex ratio on mating behavior and selection were investigated in a polygynous species, Gryllus pennsylvanicus, where the potential exists for spatial/temporal fluctuations in sex ratio of field populations. Four different sex ratios (males: females, 5:0, 5:2, 5:5, 5:10) were investigated. Observations were conducted in late summer over two field seasons, from 2400 h , to 1000 h EST. Several male characters thought to be associated with male reproduc.tive success were studied: calling duration, searching distance, weight, fighting behavior, courtship frequency, and mating success. Variance in male mating success was used as the indicator for the opportunity for sexual selection. Total selection was estimated as the univariate regression coefficient between relative fitness and the character of interest, while direct selection was estimated as standardized partial regression coefficients generated from a multiple regression of relative fitness on each character. The opportunity for sexual selection was highest at 5:2 and lowest at 5:10. The frequency of fighting behavior was highest at 5:2 and 5:5. Fighting ability (% wins) was determined to be an important correlate of male body weight. Direct selection for increased male body weight was detected at 5:2, while total selection for body weight was seen at 5:5. Selection on male body weight was not detected at 5: 10. Calling duration decreased as sex ratio became more female-biased. Total and direct selection were detected for increased calling at 5:2, only total selection for calling was seen at 5:5, whereas direct selection against calling was detected at 5: 10. Searching distance also decreased as sex ratio became more female-biased, however no form of selection was detected for searching at any of the sex ratios. Data are discussed in terms of sexual selection on male reproductive tactics, the mating system and maintenance of genetic variation in male reproductive behavior.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Affiliation: Département de microbiologie et immunologie, Faculté de médecine, Université de Montréal & Institut de Recherches Cliniques de Montréal