Estrutura de guildas de polinizacao de Solanum aculeatissimum Jacq. e S. variabile Mart. (Solanaceae)

Some aspects of the reproductive biology of Solanum aculeatissimum and S. variabile (Solanaceae) were considered in this study with special reference to floral visitants and their behavior. The most frequent Solanum visitors are bees of the genus Centris, Epicharis, Bombus, Oxaea and Xylocopa that collect pollen from the anthers by means of body vibration. The behavior of those bees on the flowers and their flight distances makes them important pollinators mainly to Solanum aculeatissimum that bears cross-pollination. The guild of pollination of Solanum aculeatissimum and S. variable is composed by bees of the cited genus and by bees of the genus Thygather, Pseudaugochloropsis and Euglossa.

Novel high-power-factor isolated electronic ballast for multiple tubular fluorescent lamps

This paper presents a novel isolated electronic ballast for multiple fluorescent lamps, featuring high power-factor, and high efficiency. Two stages compose this new electronic ballast, namely, a new voltage step-down isolated Sepic rectifier, and a classical resonant Half-Bridge inverter. The new isolated Sepic rectifier is obtained from a Zero-Current-Switching (ZCS) Pulse-Width-Modulated (PWM) soft-commutation cell. The average-current control technique is used in this preregulator stage in order to provide low phase displacement and low Total-Harmonic-Distortion (THD) at input current, resulting in high power-factor, and attending properly IEC 61000-3-2 standards. The resonant Half-Bridge inverter performs Zero-Voltage-Switching (ZVS), providing conditions for the obtaining of overall high efficiency. It is developed a design example for the new isolated electronic ballast rated at 200W output power, 220Vrms input voltage, 115Vdc dc link voltage, with rectifier and inverter stages operating at 50kHz. Finally, experimental results are presented in order to verify the developed analysis. The THD at input current is equal to 5.25%, for an input voltage THD equal to 1.63%, and the measured overall efficiency is about 88.25%, at rated load.

Fadiga em dormentes de concreto reforçados com fibras de aço

A prestressed concrete monoblock railroad tie was designed to attend the characteristics of a Brazilian railroad track with 1,600 mm gauge and 320 kN axle load. Concrete ties specimens were manufactured without and with steel fibers in a volume fraction of 60 kg/m3 (0.76 % by volume), and three different initial prestress forces. Static and fatigue tests were carried out on the ties. Static tests showed that steel fibers increase the first crack and ultimate bending moments, increase significantly the slip force of the prestressing tendons, reduce crack width, add higher ductility to the ties and decrease the stress in the prestressing tendons. Under dynamic loading the steel fibers decreased the stress in the prestressing tendons by about 50%, which improved significantly the fatigue strength of the tie. A tie without fibers failed after only 150,000 cycles. However, a similar tie, with fibers, resisted 3,000,000 cycles without suffering fatigue failure.

A high efficiency HPF-ZCS-PWM Sepic for electronic ballast with multiple tubular fluorescent lamps

This paper presents a high efficiency Sepic rectifier for an electronic ballast application with multiple fluorescent lamps. The proposed Sepic rectifier is based on a Zero-Current-Switching (ZCS) Pulse-Width-Modulated (PWM) soft-commutation cell. The high power-factor of this structure is obtained using the instantaneous average-current control technique, in order to attend properly IEC61000-3-2 standards. The inverting stage of this new electronic ballast is a classical Zero-Voltage-Switching (ZVS) Half-Bridge inverter. A proper design methodology is developed for this new electronic ballast, and a design example is presented for an application with five fluorescent lamps 40W-T12 (200W output power), 220Vrms input voltage, 130Vdc dc link voltage, with rectifier and inverter stages operating at 50kHz. Experimental results are also presented. The THD at input current is equal to 6.41%, for an input voltage THD equal to 2.14%, and the measured overall efficiency is about 92.8%, at rated load.

Ultra-estrutura de glândulas abdominais tegumentares em Oxaea flavescens (Hymenoptera, Andrenidae, Oxaeinae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Spectrophotometric flow-injection determination of sulphite in white wines involving gas diffusion through a concentric tubular membrane

A flow-injection system is proposed for the spectrophotometric determination of sulphite in white wines. The method involves analyte conversion to SO2, gas diffusion through a Teflon® semi-permeable membrane, collection into an alkaline stream (pH 8), reaction with Malachite green (MG) and monitoring at 620 nm. With a concentric tubular membrane, the system design was simplified. Influence of reagent concentrations, pH of donor and acceptor streams, temperature, timing, surfactant addition and presence of potential interfering species of the wine matrix were investigated. A pronounced (ca. 100%) enhancement in sensitivity was noted by adding cetylpyridinium chloride (CPC). The proposed system is robust and baseline drift is not observed during 4 h operating periods. Only 400 μL of sample and 0.32 mg MG are required per determination. The system handles 30 samples per hour, yielding precise results (r.s.d. < 0.015 for 1.0 - 20.0 mg L-1 SO2) in agreement with those obtained by an alternative procedure.

Microemulsões: Estrutura e aplicações como sistema de liberação de fármacos

Depending on formula composition, microemulsions may be used as a vehicle for drug administration. In this work the main applicable parameters used in the development of pharmaceutical microemulsions (ME) are analyzed. The conceptual description of the system, theoretical parameters related to formation of internal phases and some aspects of ME stability are described. The pseudo ternary phase diagram is used to characterize ME boundaries and to describe different structures in several regions of the diagram. Some applications of ME as drug delivery systems for different administration routes are also analyzed. ME offer advantages as drug delivery systems, because they favor drug absorption, being in most cases faster and more efficient than other methods in delivering the same amount of drug.

Estrutura genética de populações de Trichilia pallida Swartz (Meliaceae) por marcadores RAPD

Trichilia pallida Swartz is an Atlantic Forest shady climax tree of Meliaceae family that presents insecticide properties against chewing insects like as some family trees, making it interesting for forestry uses. Forty plants of Oito Pontas Farm population were collected in Bofete County, Santa Genebra Ecological Station in Campinas County, and Caetetus Ecological Station in Gélia County, all in the Sao Paulo State, Brazil. Leaf DNA analysis was used by RAPD method, that showed 10 highly polymorphic primers, with 72 dominant markers, used to estimate genetic diversity within and among populations. The polymorphism within populations varied from 90.3 to 97.2%, and the effective allele number varied from 1.46 ± 0.33 to 1.57 ± 0.33, while the average of genetic differentiation of populations varied from 0.27 ± 0.18 to 0, 33 ± 0.15. The gene diversity in the total population (H T) was 0.334 ± 0.02, while the average gene diversity within populations (H s) was 0.292 ± 0.017, and the coefficient of gene differentiation (G ST) was 0.125, Bofete and Campinas populations had the smallest Nei's genetic distance (0.049) and the distances of both with Gália were 0.117 and 0.107, respectively.

Dimmable electronic ballast with high power-factor SEPIC preregulator, for multiple tubular fluorescent lamps

An electronic ballast for multiple tubular fluorescent lamps is presented in this paper. The proposed structure features high power-factor, dimming capability, and soft-switching to the semiconductor devices operated in high frequencies. A Zero-Current-Switching - Pulse-Width-Modulated (ZCS-PWM) SEPIC converter composes the rectifying stage, controlled by the instantaneous average input current technique, performing soft-commutations and high input power factor. Regarding the inverting stage, it is composed by a classical resonant Half-Bridge converter, associated to Series Parallel-Loaded Resonant (SPLR) filters. The dimming control technique employed in this Half-Bridge inverter is based on the phase-shift in the current processed through the sets of filter + lamp. In addition, experimental results are shown in order to validate the developed analysis.

Geração de modelos digitais de superfície por meio de plataformas computacionais com estrutura vetorial e raster

Geographic Information Systems (GIS) integrate the technologies related to Geoprocessing, with the ability to manipulate georeferenced information through data storage, management and analysis. One of the GIS applications is the generation of Digital Elevation Models (DEM) as a result of rebuilding the elevation of a region using computation tools and artificial representation. This paper presents the DEM created from a point base in two computational frameworks with different structures (vector and raster), comparing the contour lines generated from these models with the original contour lines from analog cartographic base. It was observed that one of the generated models presented some discrepancies related to real space for both GIS structures. However, using constrained Delaunay's triangulation in raster GIS a digital elevation model was generated with contour lines quite close to the original ones, with satisfactory results. A 3-D terrain representation was also created offering a very useful tool for analysis.

Efeitos do parasitismo sobre a estrutura branquial de Leporinus macrocephalus Garavello e Britsk, 1988 (Anastomidae) e Piaractus mesopotamicus Holmberg, 1887 (Osteichthyes:Characidae).

This work described the lesions caused in different species of fish by gill parasites from fee-fishing at Guariba, State of São Paulo. The research was developed from april, 1997 to march to 1999, seeking to verified the kind tissues lesions from fish. Of these, forty and seven were Leporinus macrocephalus and fifty and five Piaractus mesopotamicus. About 87.2% of the L. macrocephalus, and 58.1% of the P. mesopotamicus were sponged by several species of parasites. The parasite most abundant in L. macrocephalus was Piscinoodinium pillulare, while monogenean, Trichodina sp and myxosporidian infected P. mesopotamicus. Severe gill lesions have been observed in L. macrocephalus and P. mesopotamicus caused by monogenean, P. pillulare e Trichodina sp. parasitism, such as intersticial hemorrhage, sub-epithelium edema, inflammation, epitelial hiperplasy in filaments and lamina, proliferation of mucosal cells and laminar fusion.

Aspectos físico-químicos e microbianos do queijo maturado por mofo obtido da coagulação mista com leite de cabra congelado e coalhada congelada

Milk goats are indicated as an economic alternative for small farmers and cheese making could improve their profits. Goat's milk has a seasonal production characteristic and shows periods of abundance and others of scarcity. The use of frozen milk or frozen curd to make cheese can be used to solve the problem. The aim of this work was to evaluate the preparation of cheese made from mixed curd and ripened by Penicillium candidum mould using slow frozen milk (in a domestic freezer) or fast frozen milk (by liquid nitrogen). The slow frozen curd and fast frozen curd without whey were used. It was observed that the cheese from the slow and fast frozen milk and from the slow and fast frozen curd did not differ from the control cheese for the yield, chemicophysical characteristics, chemical composition, extention ripened rate, depth ripened rate and microbiological aspects, even when it was expressed as a dry matter content of cheeses.

Resistência à compressão do concreto autoadensável: Influência da atividade pozolânica do calcário e do basalto

This research studies the influence of the pozzolanic activity of the calcareous and basalt in the resistence behavior of the compressive strength of high performance self-compacting concrete (HPSCC). The selected aditives are the calcareous filler and basalt filler, for they are industrial residues helping that way the sustainable development. The paste of this concrete type is constituted of cement, silica fume, calcareous filler or basalt filler, water and superplasticizer additive. In this research the relationships water/cement are fixed in 0,40 kg/kg, silica fume/cement of 0,10 kg/kg and the relationships filler/cement and superplasticizer/cement are determined through of Marsh́s cone and mini-slump tests. The granular skeleton is gotten from a composition between quartzous sand and brita of basalt that presents the lesser index of emptinesses. The results show that the HPSCC with the addition of calcareous filler has greater compressive strength than what the HPSCC with addition of basalt filler in the ages of 7, 28 and 63 days. It is explained by the fact that the calcareous filler presents greater index of pozzolanic activity than the basalt filler. Besides that the relation water/fine for the HPSCC with calcareous filler is 0,27 l/kg whereas the HPSCC with basalt filler is of 0,29 l/kg.

Tijolos prensados de solo-cimento confeccionados com resíduos de concreto

In this work results are presented of laboratory tests aiming to evaluate the possibility of using concrete wastes in manufactured soil-cement pressed bricks. Tests of characterization of used soil of the composite of this soil with concrete wastes and of the mixtures of soil cement made with this composite were evaluated. According to results of tests carried out with cylindrical specimens and with soil cement pressed bricks, it was verified that the addition of the concrete wastes improved soil cement mechanical properties, favoring the a reduction of the cement consumption, obtaining pressed bricks with a better quality.