Controle de qualidade em raios-x convencional

The progress in radiology is related with the development of new systems of image formation with the lesser dose in the pacient. The improve of the dose in the pacient, without compromising the quality of the image, is one of the responsibilities of a medical physicist in a sector of diagnosis for image. This research has as objective to evaluate the conditions of use of an equipment of x-rays, from tests of quality control. The results gotten in this work have been part of data of an Effective Program of Quality Control (PECQ) of the sector of diagnosis for image of the Hospital das Clínicas da Faculdade de Medicina de Botucatu - UNESP (HCFMB-UNESP)

Controle de qualidade e levantamento radiométrico em aparelho de Raios-X médico convencional

Along with the advance of technology, in terms of the expansion of medical exams that uses the ionizing radiation for diagnosis, there is also the concern about quality control for maintaining quality in radiographic imaging and for delivering low dose to the patient. Based on the Federal Order 453 of the Secretariat of Health Surveillance, which takes account of the practical and justification of individual medical exposures, the optimization of radiological protection, limitation of individual dose, and the prevention of accidents, were done through this paper radiodiagnostic tests on medical equipment in order to accept it or not, according to SVS-453. Along with the help and support of P&R Consulting and Medical Physics Marilia, SP, were made Quality Control and Radiometric Control in equipment from various cities across the state of São Paulo. The equipment discussed in this work is classified as conventional X-ray. According to the Federal Order SVS-453, the quality control in the program of quality assurance should include the following minimum set of constancy tests, with following minimum frequency: biennial tests for representative values of dose given to the patients of radiography and CT performed in the service; annual tests for accuracy of the indicator tube voltage (kVp), accuracy of exposure time, half-value layer, aligning the central axis of the beam of x-ray tube, performance (mGy / mA.min.m²), linearity of the rate of kerma on air with the mAs, reproducibility of the kerma on air rates, reproducibility of the automatic exposure, focal spot size, integrity of accessories and clothing for individual protection; semiannually for collimation system accuracy; weekly for temperature processing system and sensitometry processing system. For the room Radiometric Survey it was done a sketch...(Complete abstract click electronic access below)

Estudo da viscosidade do sangue: quantidade de amostra necessária à obtenção de medida

Os valores encontrados para a viscosidade sanguínea tendem a aparecer com diferenças significativas, de acordo com o sexo, avançar da idade e uso de substâncias. Pelo fato de o sangue ser um fluido não newtoniano, não podemos expressar sua viscosidade em termos absolutos sem que sejam levadas em conta as condições em que a mensuração é feita. Estudos anteriores destacaram a importância esta medida, considerando o efeito da idade, o uso de substâncias, bem como sua relação com Fluxo Sanguíneo Regional Cerebral, o que pode indicar correlação com declínios cognitivos. Entretanto, a prática médica carece ainda de um método simples e clinicamente prático para a verificação desta medida, além de valores de referência. Como passo inicial no sentido de padronizar os procedimentos e condições do processo de medição, avaliamos a quantidade mínima de amostra necessária para a medição da viscosidade sanguínea, utilizando este equipamento. Um total de 20 amostras de sangue foram coletadas de indivíduos saudáveis, entre 18 e 60 anos, em tubos com EDTA, e cada amostra dividida em 9 sub-amostras (de 600μl, 550μl, 500μl, 450μl, 400μl, 350μl, 300μl, 250μl e 200μl), totalizando, portanto, um total de aproximadamente 180 medições. A quantidade de 200 μl apresentou diferenças significativas com relação à primeira medida obtida, quando comparada com todas as demais quantidades (p<0,001), o que indica que com o uso desta quantidade, não é possível obter resultados confiáveis, pois existe alteração nos valores de VS obtidos relacionada à quantidade de material utilizado. Considerando a menor quantidade, bem como, que estivesse dentro da faixa de variação aceitável de 0,2 mPa.s, e a qual não apresentasse diferença significativa quando comparadas às demais (p>0,05), foi verificada a quantidade de 250 μl como a mais eficiente... (Resumo completo, clicar acesso eletrônico abaixo)

Impacto de interações antrópicas sobre o comportamento de peixes-boi marinhos (Trichechus manatus manatus) reintroduzidos no litoral norte de Alagoas

Atualmente o encalhe de filhotes órfãos representa uma das principais ameaças à conservação do peixe-boi marinho (Trichechus manatus manatus) no litoral nordeste do Brasil. O Projeto Peixe-boi resgata os filhotes encalhados, reabilita em cativeiro e reintroduz estes animais em áreas de ocorrência histórica e em locais onde a população está em declínio. Estudos sobre comportamento animal fornecem uma importante ferramenta para avaliação dos Programas de Reintrodução. Os trabalhos existentes sobre comportamento de peixes-boi marinhos em vida livre sujeitos a interações antrópicas restringem-se a animais nativos na Flórida. No Brasil, há estudos etológicos apenas com espécimes em cativeiro ou recinto em ambiente natural. O objetivo do trabalho foi verificar possíveis alterações comportamentais de peixes-boi reintroduzidos, ou seja, que passaram parte da vida em cativeiro e foram soltos em ambiente natural, em função de interações antrópicas. No período de Fevereiro a Julho de 2010, com o auxílio da radio-telemetria, uma fêmea e dois machos (8 anos de idade) foram observados diariamente, em períodos alternados, com a metodologia do “animal focal”. Para o monitoramento, utilizou-se bicicleta, caiaque e, em locais de difícil acesso, o mesmo foi feito a pé. Totalizou-se 114 horas de observação para Arani e 167 horas para Potiguar. As observações da fêmea Aira ficaram comprometidas em função da perda do equipamento de radio-telemetria. A análise dos dados mostrou uma alta freqüência de comportamentos de interação (mais de 50%) em relação aos demais comportamentos de função vital para os dois machos. Dessas interações, as com animais de mesma espécie e objeto atingiram elevadas freqüências. Verificou-se ainda que a categoria afiliativa foi predominante nas interações entre peixes-bois... (Resumo completo, clicar acesso eletrônico abaixo)

Campylobacter sp como perigo biológico na produção de peito de frango maturado

Pós-graduação em Microbiologia Agropecuária - FCAV

Localização de descargas parciais em transformadores de potência imersos em óleo mineral por meio de cápsulas piezelétricas de baixo custo e sistemas inteligentes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Capacidade antioxidante e estabilidade oxidativa de Gengiber officinale

The main objectives of this work were to evaluate the antioxidant activity and to determine of an ethanolic ginger extract total phenolic compounds concentration, as well as verifying its behavior by means of the oxidative stability, when added to refined soybean oil in concentrations of 0, 500, 1000, 1500, 2000 and 2500 mg/kg. The maximum antioxidant activity and EC50, concentration of the extract to achieve 50% of the antioxidant activity, value determined by free radical DPPH method were 79.1% and 42.6 g/mL, respectively. The total phenolic compounds concentration, determined to Folin-Ciocalteu method, was 251 mg/g. The induction period of the samples increased according to the augment of the extract concentration in the oil when evaluated using oxidative stability through the Rancimat equipament. It was possible to conclude that the ginger extracts possess effective action against the lipid oxidation and can be applied in foods as natural antioxidant.

Avaliação da Taxa de Exposição em Exames Radiológicos Realizados em Procedimentos Cirúrgicos - Minimização dos Riscos em Indivíduos Ocupacionalmente Expostos

This paper consists in the evaluation of the exposure rate to ionizing radiation to which professionals working in surgical procedures which require radiological examinations are subjected. Were initially performed real-time readings of exposure rate within four distinct operating rooms during the execution of four surgical procedures that made use of fluoroscopy equipment (including three orthopedic surgeries, one in the shoulder, one in the arm, another for deployment of metal pin in the leg region, and a fourth for vascular procedure); in these surgeries were used ionization chamber detector and an electrometer. In order to check the values achieved, was made a re-evaluation of the distribution of the rate of exposure to radiation, from the surgical procedures, now with thermoluminescent dosimeters (TLDs). For this, thirty TLDs were distributed in the operating rooms, arranged in points of interest as occupation by professionals. The TLDs were prepared for thirty consecutive days, after which they were removed and replaced with new dosimeters not exposed yet. The dosimeters were subjected to reading of the rate of exposure; this procedure was repeated for four months without interruption. The quantification of the results sought primarily to convert the rate of exposure for equivalent dose rate, both in measurements with ionization chamber as in measurements with TLDs, in order to highlight the presence of the biological effect of ionizing radiation for comparisons within scientific context. Then, the results were plotted to establish the relationship between the values of equivalent dose and the distance to the central axis of the x -ray source, confirming the inverse square law for distance. Finally, the values were associated with the maximum limit recommended by the legislation for occupationally exposed individuals. The methodology for the analysis and quantification of the data in this work aims at implementing a work plan that meets ...

Gestão da Manutenção Centrada na Confiabilidade em Pontes Rolantes

The objective of this work is to perform a study applying the methodology of Reliability Centered Maintenance - MCC to a group of cranes belonging to Amsted -Maxion in Cruzeiro - SP. The work consists of a presentation of maintenance, the reasons why more and more people worry about maintenance, making a presentation on the types of maintenance, its peculiar characteristics and then do a study where you identified the functionality required by the equipment under study, identified failure modes and their probable causes, and then detail the effects and consequences of these failures. With that evaluate the criticality of these failures and identify the most significant consequences that affect safety, availability or cost of equipment operation and allow a selection of the most appropriate tasks for the identified failure modes. We will also present best crane equipment, its main components, verify that there was or not improvement in the machine after the application of MCC and make a current analysis of maintenance in Amsted -Maxion

Elementos de manutenção de transformadores de potência

The intended purpose of this paper is to present the main commissioning tests for power transformers and the most used techniques in industrial segment, it is also discussed your results and consequences in the equipment’s normal operation. Also in this text, it is given specific information concerning a maintenance plan compatible to power transformers, with elements of preventive and predictive maintenance, exposing essential components, tests and the regulations current, showing how analyze and interpreted the results from this maintenance resources. Also in this paper is submitted the economic impact of damage to transformers and how the correct maintenance method can minimize them. The objective of this text is demonstrate the importance of the equipment and the benefits of proper maintenance, much of in financial terms as in electric system reliability

Estudo das características fluidodinâmicas do bagaço de cana de açúcar para aplicações da gaseificação no setor sucroalcooleiro

In this work is studied the fluid dynamic characteristics of sugarcane bagasse for gasification applications and use of syngas in the sugarcane sector. This is an experimental work, which is initially performed the particle size separation of sugarcane bagasse particles, using appropriate equipment. Through the experiment is possible to determine the average diameter of particles pomace typical sugarcane mill. The equipment used for the grading sieve separation assembly consists of several dimensions, arranged vertically and which shows adequate for good separation from the pulp. Later, it makes immediate analysis for the determination of moisture, ash, volatile materials and fixed carbon. The study also determines the gross calorific value and allows analysis of densities of particles of sugar cane bagasse. Also studied the bagasse morphology using electron microscopes, where it was possible to visualize the geometry of the particles of bagasse. The use of Electronic Scanning Microscopy (SEM) provided better understand the morphology and particle size measured by using photography methods. Two methods for determining the sphericity of the particles were also used. The experiments carried out using appropriate standards and specific equations, allowing compare the present results with the values found by several researchers. Subsequently, fluid dynamic simulations were performed for the determination of porosity and minimum fluidization velocity theoretical. It follows that the sphericity and porosity of the bagasse particles influence the minimum fluidization velocity of biomass

Efeitos do treinamento funcional sobre a composição corporal, aptidão funcional e perfil lipídico de mulheres na pós-menopausa

Pós-graduação em Fisioterapia - FCT

Incorporação da apatita na superfície da liga Ti30ta empregando tratamento alcalino associado à eletrofiação de fibras de PCL

Pós-graduação em Engenharia Mecânica - FEG

Avaliação da integração de implantes de silicone com superfícies lisa, texturizada e de poliuretano em cavidades anoftálmicas evisceradas de coelhos

Pós-graduação em Bases Gerais da Cirurgia - FMB

Efeito da aspersão de água sobre a contaminação microbiológica em esteiras transportadoras de cortes de frango

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)