Academics and activists in the policy process : engagement with Australian media inquiries 2011-13

After its narrow re-election in June 2010, the Australian Labor government undertook a series of public inquiries into reform of Australian media, communications and copyright laws. One important driver of policy reform was the government’s commitment to building a National Broadband Network (NBN), and the implications this had for existing broadcasting and telecommunications policy, as it would constitute a major driver of convergence of media and communications access devices and content platforms. These inquiries included: the Convergence Review of media and communications legislation; the Australian Law Reform Commission (ALRC) review of the National Classification Scheme; the Independent Media Inquiry (Finkelstein Review) into Media and Media Regulation; and the ALRC review of Copyright and the Digital Economy. One unusual feature of this review process, discussed in the paper, was the degree to which academics were involved in the process, not simply as providers of expert opinion, but as review chairs seconded from their universities. This paper considers the role played by activist groups in all of these inquiries and their relationship to the various participants in the inquiries, as well as the implications of academics being engaged in such inquiries, not simply as activist-scholars, but as those primarily responsible for delivering policy review outcomes. The latter brings to the forefront issues arising in from direct engagement with governments and state agencies themselves, which challenges traditional understandings of the academic community as “critical outsiders” towards such policy processes.

Development and validation of an instrument to measure organizational cultures' support of business process management

The purpose of Business Process Management (BPM) is to increase the efficiency and effectiveness of organizational processes through improvement and innovation. Despite a common understanding that culture is an important element in these efforts, there is a dearth of theoretical and empirical research on culture as a facilitator of successful BPM. We develop the BPM culture construct and propose a validated instrument with which to measure organizational cultures’ support of BPM. The operationalization of the BPM culture concept provides a theoretical foundation for future research and a tool to assist organizations in developing a cultural environment that supports successful BPM.

Mapping local solutions to entrenched transport problems: Key lessons regarding the use of geographical information technologies in community mapping with disadvantaged communities

There is an increasing interest in the use of information technology as a participatory planning tool, particularly the use of geographical information technologies to support collaborative activities such as community mapping. However, despite their promise, the introduction of such technologies does not necessarily promote better participation nor improve collaboration. In part this can be attributed to a tendency for planners to focus on the technical considerations associated with these technologies at the expense of broader participation considerations. In this paper we draw on the experiences of a community mapping project with disadvantaged communities in suburban Australia to highlight the importance of selecting tools and techniques which support and enhance participatory planning. This community mapping project, designed to identify and document community-generated transport issues and solutions, had originally intended to use cadastral maps extracted from the government’s digital cadastral database as the foundation for its community mapping approach. It was quickly discovered that the local residents found the cadastral maps confusing as the maps lacked sufficient detail to orient them to their suburb (the study area). In response to these concerns and consistent with the project’s participatory framework, a conceptual base map based on resident’s views of landmarks of local importance was developed to support the community mapping process. Based on this community mapping experience we outline four key lessons learned regarding the process of community mapping and the place of geographical information technologies within this process.

Teaching design thinking and design led innovation to non-designers : a tertiary facilitator multidisciplinary study

This paper aims to address the knowledge gap in regards to the potential intermediary role tertiary institutions can play in developing generic design thinking/design led innovation capabilities in non-designers. Specifically, it investigates the value derived from the contribution of postgraduate design students as facilitators/educators for undergraduate non-design student cohorts. It examines a design immersion workshop designed to encourage the use of design thinking capabilities for project brief development for undergraduate multi-disciplinary student teams involved in a community service learning project for a social enterprise. The workshop was facilitated by design led innovation masters students embedded in industry organisations to research the integration of design led innovation capabilities in business. Data was collected from participating non-design students and postgraduate facilitators’ in the form of reflective journals and semi-structured interviews. The thematic analysis provided insight into the value of design thinking/design led innovation immersion programs for both the postgraduate facilitators and the undergraduate non-design students. The research results will inform a tentative foundation prototype framework to allow for ongoing program developments and research in design thinking/design led innovation integration in higher education, facilitating the development of generic capabilities required to empower future generations for business innovation and active citizenship in the 21st century knowledge economy.

The Challenges and Opportunities in Developing an Organizational Approach to Managing Workforce Diversity

For the past two decades the concept of managing individual difference in the workforce has been popular in many Western organizations, with calls to manage this "diversity" for the greater good of the organization and the\ individuals in it. Paradoxically, there is no agreed definition for this concept, and its description remains unclear and often contested (Jensen, Maznevski & Schneider 2011). Indeed, a range of terms is used, including diversity: diversity at work, managing diversity, diversity management, workplace diversity, productive diversity, and so forth. The foundation of the concept of managing diversity is the idea that an organization's workforce displays a range of “diverse” characteristics. The characteristics that are included under the heading Of "diversity" vary.

Development of school connectedness as a component of an injury prevention program for early adolescents

The current program of research addresses the need for multi-level programs to target the major increase in injury rates that occurs throughout adolescence. Specifically, it involves the investigation of school connectedness as a protective factor for adolescent injury, and the development of school connectedness as a component of an injury prevention program. To date, school-based risk taking and injury prevention has frequently been limited to addressing adolescents' knowledge and attitudes to risk behaviours, and has largely overlooked the importance of the wider school social context as a protective factor in adolescent development. Additionally, school connectedness has been primarily studied in terms of its impact on student achievement, wellbeing and risk taking behaviour, and research has not yet addressed possible links with injury. Further, school connectedness intervention programs have targeted risk taking behaviours without evaluating their potential impact on injury outcomes. This is the first reported research to develop strategies to increase school connectedness as part of a school-based injury prevention program. The research program was conceptualised as three distinct stages. The development of these research stages was informed by a comprehensive review of the literature on adolescent risk taking, injury and school-based prevention, as well as on school connectedness and its importance in adolescence. A review of the school connectedness literature indicated that students' connectedness is largely influenced by relationships within the school context including with teachers and other school staff, and is therefore a potentially modifiable factor that may be targeted in school-based programs. Overall, the literature shows school connectedness to be a key protective factor in adolescent development. This review established a foundation from which the current program of research was designed. The first stage of the research involved an empirical investigation of the relationship between adolescent risk taking-related injuries and school connectedness. Stage one incorporated two studies. The first involved the development of a measure of adolescent injury, the Extended Adolescent Injury Checklist (E-AIC), for use in the current research as well as in future school-based studies and program evaluation. The results of this study also highlighted the extent of the problem of risk-related injury in adolescence. The second study in Stage one examined the relationship between students' reports of school connectedness, risk taking behaviour and risk taking-related injuries on the E-AIC. The results of this study showed significant relationships between increased school connectedness and reduced reported engagement in transport and violence risk taking, and fewer associated injuries. This study therefore suggested the potential for school-based injury prevention programs to incorporate strategies targeting increased adolescent connectedness to school. The second stage of this research involved the compilation of an evidence base to inform the design of a school connectedness intervention. Stage two also incorporated two studies. The first study in Stage two involved a systematic review of programs that have targeted school connectedness for reduced risk taking and injury. The results of this study revealed that interventions targeting school connectedness can be effective in reducing adolescent risk taking behaviour, and also provided an evidence base for the design of the current school connectedness intervention. The second study in Stage two examined teachers' understanding and perceptions of school connectedness. This qualitative study indicated that teachers consider students' connectedness to be an important factor that relates to their risk taking behaviour; and also provided directions and content for the intervention design stage. The third stage of this research built upon the findings of each of the previous studies, and involved the design, implementation and evaluation of a school connectedness intervention as a component of an adolescent injury prevention program, Skills for Preventing Injury in Youth (SPIY). This connectedness intervention was designed as a professional development workshop for teachers of 13 to 14 year old adolescents, and was developed as a complementary component to the curriculum-based SPIY program. The SPIY connectedness component was implemented and evaluated using process and six-month impact evaluation methodologies. The results of this study revealed that teachers saw value in the program and made use of the strategies presented, and that program school students' self-reported violence risk behaviour was reduced at six-month follow-up. Despite these promising findings, the results of this study did not demonstrate a significant impact of the program on change in students' connectedness to school, relative to comparison schools. The positive impact on self-reported violence risk behaviour was however replicated in additional analyses comparing students participating in the connectedness version of SPIY with students participating in an earlier curriculumonly version of the program. This finding indicated that the connectedness component has additional benefits relating to reduction in violence risks, over and above a curriculum-only version of the program. This research was the first reported to address the relationship between school connectedness and adolescent injury outcomes, and to develop school connectedness as a component of an adolescent injury prevention program. Overall, the results of this program of research have demonstrated the importance of incorporating strategies targeting the wider school social context, including school connectedness, in adolescent injury prevention programs. This research has important implications for future research and practice in adolescent injury prevention.

Get real : the development, implementation and evaluation of an intervention for primary aged children with High Functioning Autism

Children with Autism Spectrum Disorder experience difficulty in communication and in understanding the social world which can have negative consequences for their relationships, in managing emotions, and generally dealing with the challenges of everyday life. This thesis examines the effectiveness of the Active and Reflective components of the Get REAL program through the assessment of the detailed coding of video-recorded observations and longitudinal quantitative analysis. The aim of Get REAL is to increase the social, emotional, and cognitive learning of children with High Functioning Autism (HFA). Get REAL is a group program designed specifically for use in inclusive primary school settings. The Get REAL program was designed in response to the mixed success of generalisation of learning to new contexts of existing social skills programs. The theoretical foundation of Get REAL is based upon pedagogical theory and learning theory to facilitate transfer of learning, combined with experiential, individualised, evaluative and organisational approaches. This thesis is by publication and consists of four refereed journal papers; 1 accepted for publication and 3 that are under review. Paper 1 describes the development and theoretical basis of the Get REAL program and provides detail of the program structure and learning cycle. The focus of Paper 1 reflects the first question of interest in the thesis which is about the extent to which learning derived from participation in the program can be generalised to other contexts. Participants are 16 children with HFA ranging in age from 8-13 years. Results provided support for the generalisability of learning from Get REAL to home and school evidenced by parent and teacher data collected pre and post participation in Get REAL. Following establishment of the generalisation of learning from Get REAL, Papers 2 and 3 focus on the Active and Reflective components of the program in order to examine how individual and group learning takes place. Participants (N = 12) in the program are video-taped during the Active and Reflective Sessions. Using identical coding protocols of video data, improvements in prosocial behaviour and diminishing of inappropriate behaviours were apparent with the exception of perspective taking. Data also revealed that 2 of the participants had atypical trajectories. An in-depth case study analysis was then conducted with these 2 participants in Paper 4. Data included reports from health care and education professionals within the school and externally (e.g., paediatrician) and identified the multi-faceted nature of care needed for children with comorbid diagnoses and extremely challenging family circumstances as a complex task to effect change. Results of this research support the effectiveness of the Get REAL program in promoting pro social behaviours such as improvements in engaging with others and emotional regulation, and in diminishing unwanted behaviours such as conduct problems. Further, the gains made by the participating children were found to be generalisable beyond Get REAL to home and other school settings. The research contained in the thesis adds to current knowledge about how learning can take place for children with HFA. Results show that an experiential learning framework with a focus on social cognition, together with explicit teaching, scaffolded with video feedback, are key ingredients for the generalisation of social learning to broader contexts.

Ultimate flexural limit states analysis of prestressed concrete sleeper

Railway is one of the most important, reliable and widely used means of transportation, carrying freight, passengers, minerals, grains, etc. Thus, research on railway tracks is extremely important for the development of railway engineering and technologies. The safe operation of a railway track is based on the railway track structure that includes rails, fasteners, pads, sleepers, ballast, subballast and formation. Sleepers are very important components of the entire structure and may be made of timber, concrete, steel or synthetic materials. Concrete sleepers were first installed around the middle of last century and currently are installed in great numbers around the world. Consequently, the design of concrete sleepers has a direct impact on the safe operation of railways. The "permissible stress" method is currently most commonly used to design sleepers. However, the permissible stress principle does not consider the ultimate strength of materials, probabilities of actual loads, and the risks associated with failure, all of which could lead to the conclusion of cost-ineffectiveness and over design of current prestressed concrete sleepers. Recently the limit states design method, which appeared in the last century and has been already applied in the design of buildings, bridges, etc, is proposed as a better method for the design of prestressed concrete sleepers. The limit states design has significant advantages compared to the permissible stress design, such as the utilisation of the full strength of the member, and a rational analysis of the probabilities related to sleeper strength and applied loads. This research aims to apply the ultimate limit states design to the prestressed concrete sleeper, namely to obtain the load factors of both static and dynamic loads for the ultimate limit states design equations. However, the sleepers in rail tracks require different safety levels for different types of tracks, which mean the different types of tracks have different load factors of limit states design equations. Therefore, the core tasks of this research are to find the load factors of the static component and dynamic component of loads on track and the strength reduction factor of the sleeper bending strength for the ultimate limit states design equations for four main types of tracks, i.e., heavy haul, freight, medium speed passenger and high speed passenger tracks. To find those factors, the multiple samples of static loads, dynamic loads and their distributions are needed. In the four types of tracks, the heavy haul track has the measured data from Braeside Line (A heavy haul line in Central Queensland), and the distributions of both static and dynamic loads can be found from these data. The other three types of tracks have no measured data from sites and the experimental data are hardly available. In order to generate the data samples and obtain their distributions, the computer based simulations were employed and assumed the wheel-track impacts as induced by different sizes of wheel flats. A valid simulation package named DTrack was firstly employed to generate the dynamic loads for the freight and medium speed passenger tracks. However, DTrack is only valid for the tracks which carry low or medium speed vehicles. Therefore, a 3-D finite element (FE) model was then established for the wheel-track impact analysis of the high speed track. This FE model has been validated by comparing its simulation results with the DTrack simulation results, and with the results from traditional theoretical calculations based on the case of heavy haul track. Furthermore, the dynamic load data of the high speed track were obtained from the FE model and the distributions of both static and dynamic loads were extracted accordingly. All derived distributions of loads were fitted by appropriate functions. Through extrapolating those distributions, the important parameters of distributions for the static load induced sleeper bending moment and the extreme wheel-rail impact force induced sleeper dynamic bending moments and finally, the load factors, were obtained. Eventually, the load factors were obtained by the limit states design calibration based on reliability analyses with the derived distributions. After that, a sensitivity analysis was performed and the reliability of the achieved limit states design equations was confirmed. It has been found that the limit states design can be effectively applied to railway concrete sleepers. This research significantly contributes to railway engineering and the track safety area. It helps to decrease the failure and risks of track structure and accidents; better determines the load range for existing sleepers in track; better rates the strength of concrete sleepers to support bigger impact and loads on railway track; increases the reliability of the concrete sleepers and hugely saves investments on railway industries. Based on this research, many other bodies of research can be promoted in the future. Firstly, it has been found that the 3-D FE model is suitable for the study of track loadings and track structure vibrations. Secondly, the equations for serviceability and damageability limit states can be developed based on the concepts of limit states design equations of concrete sleepers obtained in this research, which are for the ultimate limit states.

Research capacity and culture in podiatry : early observations within Queensland Health

Background Research is a major driver of health care improvement and evidence-based practice is becoming the foundation of health care delivery. For health professions to develop within emerging models of health care delivery, it would seem imperative to develop and monitor the research capacity and evidence-based literacy of the health care workforce. This observational paper aims to report the research capacity levels of statewide populations of public-sector podiatrists at two different time points twelve-months apart. Methods The Research Capacity & Culture (RCC) survey was electronically distributed to all Queensland Health (Australia) employed podiatrists in January 2011 (n = 58) and January 2012 (n = 60). The RCC is a validated tool designed to measure indicators of research skill in health professionals. Participants rate skill levels against each individual, team and organisation statement on a 10-point scale (one = lowest, ten = highest). Chi-squared and Mann Whitney U tests were used to determine any differences between the results of the two survey samples. A minimum significance of p < 0.05 was used throughout. Results Thirty-seven (64%) podiatrists responded to the 2011 survey and 33 (55%) the 2012 survey. The 2011 survey respondents reported low skill levels (Median < 4) on most aspects of individual research aspects, except for their ability to locate and critically review research literature (Median > 6). Whereas, most reported their organisation’s skills to perform and support research at much higher levels (Median > 6). The 2012 survey respondents reported significantly higher skill ratings compared to the 2011 survey in individuals’ ability to secure research funding, submit ethics applications, and provide research advice, plus, in their organisation’s skills to support, fund, monitor, mentor and engage universities to partner their research (p < 0.05). Conclusions This study appears to report the research capacity levels of the largest populations of podiatrists published. The 2011 survey findings indicate podiatrists have similarly low research capacity skill levels to those reported in the allied health literature. The 2012 survey, compared to the 2011 survey, suggests podiatrists perceived higher skills and support to initiate research in 2012. This improvement coincided with the implementation of research capacity building strategies.

Orthopaedics and trauma Queensland annual report 2012

Orthopaedics and Trauma Queensland, the Centre for Research and Education in Musculoskeletal Disorders, is an internationally recognised research group that continues to develop its reputation as an international leader in research and education. It provides a stimulus for research, education and clinical application within the international orthopaedic and trauma communities. Orthopaedics and Trauma Queensland develops and promotes the innovative use of engineering and technology, in collaboration with surgeons, to provide new techniques, materials, procedures and medical devices. Its integration with clinical practice and strong links with hospitals ensure that the research will be translated into practical outcomes for patients. The group undertakes clinical practice in orthopaedics and trauma and applies core engineering skills to challenges in medicine. The research is built on a strong foundation of knowledge in biomedical engineering, and incorporates expertise in cell biology, mathematical modelling, human anatomy and physiology and clinical medicine in orthopaedics and trauma. New knowledge is being developed and applied to the full range of orthopaedic diseases and injuries, such as knee and hip replacements, fractures and spinal deformities.

Precedent-free fault isolation in a diesel engine EGR valve system

In this paper, a framework for isolating unprecedented faults for an EGR valve system is presented. Using normal behavior data generated by a high fidelity engine simulation, the recently introduced Growing Structure Multiple Model System (GSMMS) is used to construct models of normal behavior for an EGR valve system and its various subsystems. Using the GSMMS models as a foundation, anomalous behavior of the entire system is then detected as statistically significant departures of the most recent modeling residuals from the modeling residuals during normal behavior. By reconnecting anomaly detectors to the constituent subsystems, the anomaly can be isolated without the need for prior training using faulty data. Furthermore, faults that were previously encountered (and modeled) are recognized using the same approach as the anomaly detectors.

Precedent-free fault isolation in a diesel engine exhaust gas recirculation system

In this paper, a recently introduced model-based method for precedent-free fault detection and isolation (FDI) is modified to deal with multiple input, multiple output (MIMO) systems and is applied to an automotive engine with exhaust gas recirculation (EGR) system. Using normal behavior data generated by a high fidelity engine simulation, the growing structure multiple model system (GSMMS) approach is used to construct dynamic models of normal behavior for the EGR system and its constituent subsystems. Using the GSMMS models as a foundation, anomalous behavior is detected whenever statistically significant departures of the most recent modeling residuals away from the modeling residuals displayed during normal behavior are observed. By reconnecting the anomaly detectors (ADs) to the constituent subsystems, EGR valve, cooler, and valve controller faults are isolated without the need for prior training using data corresponding to particular faulty system behaviors.

Clinical practice guidelines for nurse-administered procedural sedation and analgesia in the cardiac catheterisation laboratory : A modified Delphi study

Aim To develop clinical practice guidelines for nurse-administered procedural sedation and analgesia in the cardiac catheterisation laboratory. Background Numerous studies have reported that nurse-administered procedural sedation and analgesia is safe. However, the broad scope of existing guidelines for the administration and monitoring of patients who receive sedation during medical procedures without an anaesthetist presents means there is a lack of specific guidance regarding optimal nursing practices for the unique circumstances in which nurse-administered procedural sedation and analgesia is used in the cardiac catheterisation laboratory. Methods A sequential mixed methods design was utilised. Initial recommendations were produced from three studies conducted by the authors: an integrative review; a qualitative study; and a cross-sectional survey. The recommendations were revised in accordance with responses from a modified Delphi study. The first Delphi round was completed by nine senior cardiac catheterisation laboratory nurses. All but one of the draft recommendations met the pre-determined cut-off point for inclusion. There were a total of 59 responses to the second round. Consensus was reached on all recommendations. Implications for nursing The guidelines that were derived from the Delphi study offer twenty four recommendations within six domains of nursing practice: Pre-procedural assessment; Pre-procedural patient and family education; Pre-procedural patient comfort; Intra-procedural patient comfort; Intra-procedural patient assessment and monitoring; and Post-procedural patient assessment and monitoring. Conclusion These guidelines provide an important foundation towards the delivery of safe, consistent and evidence-based nursing care for the many patients who receive sedation in the cardiac catheterisation laboratory setting.

Principles of investments

"Emphasises asset allocation while presenting the practical applications of investment theory. The authors concentrate on the intuition and insights that will be useful to students throughout their careers as new ideas and challenges emerge from the financial marketplace. It provides a good foundation to understand the basic types of securities and financial markets as well as how trading in those markets is conducted. The Portfolio Management section is discussed towards the end of the course and supported by a web-based portfolio simulation with a hypothetical $100,000 brokerage account to buy and sell stocks and mutual funds. Students get a chance to use real data found in the Wall Street Survivor simulation in conjunction with the chapters on investments. This site is powered by StockTrak, the leading provider of investment simulation services to the academic community. Principles of Investments includes increased attention to changes in market structure and trading technology. The theory is supported by a wide range of exercises, worksheets and problems."--publisher website Contents: Investments: background and issues -- Asset classes and financial markets -- Securities markets -- Managed funds and investment management -- Risk and return: past and prologue -- Efficient diversification -- Capital asset pricing and arbitrage pricing theory -- The efficient market hypothesis -- Bond prices and yields -- Managing bond portfolios -- Equity valuation -- Macroeconomic and industry analysis -- Financial statement analysis -- Investors and the investment process -- Hedge funds -- Portfolio performance evaluation.

Understanding preconditions for digital school transformation

While over the past decade many Australian schools have come to understand the transformative potential of digitally-rich teaching and learning, traditional models of schooling continue to dominate. Even with significant investment in the area, both in terms of digital resourcing and teacher professional development, innovation has generally only occurred in individual classrooms or ‘pockets’ in schools. This article discusses three interdependent conditions which need to exist as a foundation in order to facilitate the opportunity for transformation from traditional to digitally-rich ways of working in primary, middle and secondary schools or colleges. Distributed and transformational leadership approaches are critiqued with core elements identified which facilitate change. The establishment of a vision is identified and discussed as a fundamental driver and rudder for school transformation. The importance of creating and maintaining urgency to compel a school community to adopt and embed change is unpacked. This report concludes with a synthesis of the three preconditions and recommendations for proponents of digital school transformation.