Modelling sustainability performance to achieve absolute reductions in socio-ecological systems

As the world’s natural resources dwindle and critical levels of environmental pollution are approached, sustainability becomes a key issue for governments, organisations and individuals. With the consequences of such an issue in mind, this paper introduces a unifying approach to measure the sustainability performance of socio-economic systems based on the interplay between two key variables: essentiality of consumption and environmental impact. This measure attributes to every system a ‘fitness’ value i.e. a quantity that reflects its ability to remain resilient/healthy by avoiding ecological, social and economic collapse as it consumes the available resources. This new measure is tested on a system where there is a limited supply of resources and four basic consumption types. The analysis has theoretical implications as well as practical importance as it can help countries, organisations or even individuals, in finding better ways to measure sustainability performance.

Methyl chloride purification for the silicone industry

This study experimentally investigated methyl chloride (MeCl) purification method using an inhouse designed and built volumetric adsorption/desorption rig. MeCl is an essential raw material in the manufacture of silicone however all technical grades of MeCl contain concentrations (0.2 - 1.0 % wt) of dimethyl ether (DME) which poison the process. The project industrial partner had previously exhausted numerous separation methods, which all have been deemed not suitable for various reasons. Therefore, adsorption/desorption separation was proposed in this study as a potential solution with less economic and environmental impact. Pure component adsorption/desorption was carried out for DME and MeCl on six different adsorbents namely: zeolite molecular sieves (types 4 Å and 5 Å); silica gels (35-70 mesh, amorphous precipitated, and 35-60 mesh) and granular activated carbon (type 8-12 mesh). Subsequent binary gas mixture adsorption in batch and continuous mode was carried out on both zeolites and all three silica gels following thermal pre-treatment in vacuum. The adsorbents were tested as received and after being subjected to different thermal and vacuum pre-treatment conditions. The various adsorption studies were carried out at low pressure and temperature ranges of 0.5 - 3.5 atm and 20 - 100 °C. All adsorbents were characterised using Brunauer Emmett Teller (BET), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and energy dispersive x-ray analysis (EDXA) to investigate their physical and chemical properties. The well-known helium (He) expansion method was used to determine the empty manifold and adsorption cell (AC) regions and respective void volumes for the different adsorbents. The amounts adsorbed were determined using Ideal gas laws via the differential pressure method. The heat of adsorption for the various adsorbate-adsorbent (A-S) interactions was calculated using a new calorimetric method based on direct temperature measurements inside the AC. Further adsorption analysis included use of various empirical and kinetic models to determine and understand the behaviour of the respective interactions. The gas purification behaviour was investigated using gas chromatography and mass spectroscopy (GC-MC) analysis. Binary gas mixture samples were syringed from the manifold iii and AC outlet before and after adsorption/desorption analysis through manual sample injections into the GC-MS to detect and quantify the presence of DME and ultimately observe for methyl chloride purification. Convincing gas purification behaviour was confirmed using two different GC columns, thus giving more confidence on the measurement reliability. From the single pure component adsorption of DME and MeCl on the as received zeolite 4A subjected to 1 h vacuum pre-treatment, both gases exhibited pseudo second order adsorption kinetics with DME exhibiting a rate constant nearly double that of MeCl thus suggesting a faster rate of adsorption. From the adsorption isotherm classification both DME and MeCl exhibited Type II and I adsorption isotherm classifications, respectively. The strength of bonding was confirmed by the differential heat of adsorption measurement, which was found to be 23.30 and 10.21 kJ mol-1 for DME and MeCl, respectively. The former is believed to adsorb heterogeneously through hydrogen bonding whilst MeCl adsorbs homogenously via van der Waal’s (VDW) forces. Single pure component adsorption on as received zeolite 5A, silica gels (35-70, amorphous precipitated and 35-60) resulted in similar adsorption/desorption behaviour in similar quantities (mol kg-1). The adsorption isotherms for DME and MeCl on zeolite 5A, silica gels (35-70, amorphous precipitated and 35-60) and activated carbon 8-12 exhibited Type I classifications, respectively. Experiments on zeolite 5A indicated that DME adsorbed stronger, faster and with a slightly stronger strength of interaction than MeCl but in lesser quantities. On the silica gels adsorbents, DME exhibited a slightly greater adsorption capacity whilst adsorbing at a similar rate and strength of interaction compared to MeCl. On the activated carbon adsorbent, MeCl exhibited the greater adsorption capacity at a faster rate but with similar heats of adsorption. The effect of prolonged vacuum (15 h), thermal pre-treatment (150 °C) and extended equilibrium time (15 min) were investigated for the adsorption behaviour of DME and MeCl on both zeolites 4A and 5A, respectively. Compared to adsorption on as received adsorbents subjected to 1 h vacuum the adsorption capacities for DME and MeCl were found to increase by 1.95 % and 20.37 % on zeolite 4A and by 4.52 % and 6.69 % on zeolite 5A, respectively. In addition the empirical and kinetic models and differential heats of adsorption resulted in more definitive fitting curves and trends due to the true equilibrium position of the adsorbate with the adsorbent. Batch binary mixture adsorption on thermally and vacuum pre-treated zeolite 4A demonstrated purification behaviour of all adsorbents used for MeCl streams containing DME impurities, with a concentration as low as 0.66 vol. %. The GC-MS analysis showed no DME detection for the tested concentration mixtures at the AC outlet after 15 or 30 min, whereas MeCl was detectable in measurable amounts. Similar behaviour was also observed when carrying out adsorption in continuous mode. On the other hand, similar studies on the other adsorbents did not show such favourable MeCl purification behaviour. Overall this study investigated a wide range of adsorbents (zeolites, silica gels and activated carbon) and demonstrated for the first time potential to purify MeCl streams containing DME impurities using adsorption/desorption separation under different adsorbent pre-treatment and adsorption operating conditions. The study also revealed for the first time the adsorption isotherms, empirical and kinetic models and heats of adsorption for the respective adsorbentsurface (A-S) interactions. In conclusion, this study has shown strong evidence to propose zeolite 4A for adsorptive purification of MeCl. It is believed that with a technical grade MeCl stream competitive yet simultaneous co-adsorption of DME and MeCl occurs with evidence of molecular sieiving effects whereby the larger DME molecules are unable to penetrate through the adsorbent bed whereas the smaller MeCl molecules diffuse through resulting in a purified MeCl stream at the AC outlet. Ultimately, further studies are recommended for increased adsorption capacities by considering wider operating conditions, e.g. different adsorbent thermal and vacuum pre-treatment and adsorbing at temperatures closer to the boiling point of the gases and different conditions of pressure and temperature.

Applying consumer responsibility principle in evaluating environmental load of carbon emissions

There is a need for a proper indicator in order to assess the environmental impact of international trade, therefore using the carbon footprint as an indicator can be relevant and useful. The aim of this study is to show from a methodological perspective how the carbon footprint, combined with input- output models can be used for analysing the impacts of international trade on the sustainable use of national resources in a country. The use of the input-output approach has the essential advantage of being able to track the transformation of goods through the economy. The study examines the environmental impact of consumption related to international trade, using the consumer responsibility principle. In this study the use of the carbon footprint and input-output methodology is shown on the example of the Hungarian consumption and the impact of international trade. Moving from a production- based approach in climate policy to a consumption-perspective principle and allocation, would also help to increase the efficiency of emission reduction targets and the evaluation of the ecological impacts of international trade.

Applying consumer responsibility principle in evaluating environmental load of carbon emissions

There is a need for a proper indicator in order to assess the environmental impact of international trade, therefore using the carbon footprint as an indicator can be relevant and useful. The aim of this study is to show from a methodological perspective how the carbon footprint, combined with input- output models can be used for analysing the impacts of international trade on the sustainable use of national resources in a country. The use of the input-output approach has the essential advantage of being able to track the transformation of goods through the economy. The study examines the environmental impact of consumption related to international trade, using the consumer responsibility principle. In this study the use of the carbon footprint and input-output methodology is shown on the example of the Hungarian consumption and the impact of international trade. Moving from a production- based approach in climate policy to a consumption-perspective principle and allocation, would also help to increase the efficiency of emission reduction targets and the evaluation of the ecological impacts of international trade.

Adaptációra vállalkozni – avagy vállalkozói szerepek megjelenése a környezet és az alkalmazkodás viszonyában (Attempting to adapt – Entreprenurial roles in the adaptation process to environmental changes)

A szerző cikkében arra a kérdésre keresi a választ, hogy a kis- és középvállalkozások vezetőinek sajátos környezethez fűződő viszonyát alapul véve milyen vállalkozói szerepek azonosíthatóak a környezeti változásokra való reagálás során. A kutatás központi kérdése, hogy a vállalkozó miként tekint magára az adaptációra a turbulensen változó környezeti viszonyok között, és magának milyen szerepet szán az alkalmazkodási folyamat során. A cikk bemutatja a vállalkozó személyiségének alapvető vonásait, külön kitérve a vállalkozó vezető személyére, majd ezt követően az adaptáció legjellemzőbb formáit és tulajdonságait helyezi középpontba. A tanulmány 14 hazai kis- és középvállalkozás vezetőjével készített interjú feldolgozásával, valamint Hortoványi és Szabó (2006a) adaptációs stratégiai típusai alapján három kategóriát azonosít a környezetfelfogás és reagálás kontextusában. ______ This paper focuses on the role of the entrepreneur in the adaptation process, how we can determine the role of the entrepreneur to environmental changes and to strategic adaptation itself. The paper begins with the presentation of the entrepreneurial models, focusing on the entrepreneurial management afterwards continues with a brief summary of the adaptation approach to strategy. Emphasizing that adaptation to changes can vary as innovation or entrepreneurship is concerned. Proactivity presents an adaptation strategy and moreover can be related to entrepreneurial behaviour and therefore characterizes the viewpoint of the entrepreneur. Entrepreneurs have to react to the changing environmental with analysis and proactive reaction, as future and innovation orientation is an integrate part of their entrepreneurial personality. Examining 14 interviews made with Hungarian entrepreneurs the paper identifies three categories which determine the role of the entrepreneurs in the adaptation process.

Development of an odor management plan for industrial stationary sources in an urban environment: A case study for Broward County, Florida

Objectionable odors remain at the top of air pollution complaints in urban areas such as Broward County that is subject to increasing residential and industrial developments. The odor complaints in Broward County escalated by 150 percent for the 2001 to 2004 period although the population increased by only 6 percent. It is estimated that in 2010 the population will increase to 2.5 million. Relying solely on enforcing the local odor ordinance is evidently not sufficient to manage the escalating odor complaint trends. An alternate approach similar to odor management plans (OMPs) that are successful in managing major malodor sources such as animal farms is required. ^ This study aims to develop and determine the feasibility of implementing a comprehensive odor management plan (COMP) for the entire Broward County. Unlike existing OMPs for single sources where the receptors (i.e. the complainants) are located beyond the boundary of the source, the COMP addresses a complex model of multiple sources and receptors coexisting within the boundary of the entire county. Each receptor is potentially subjected to malodor emissions from multiple sources within the county. Also, the quantity and quality of the source/receptor variables are continuously changing. ^ The results of this study show that it is feasible to develop a COMP that adopts a systematic procedure to: (1) Generate maps of existing odor complaint areas and malodor sources, (2) Identify potential odor sources (target sources) responsible for existing odor complaints, (3) Identify possible odor control strategies for target sources, (4) Determine the criteria for implementing odor control strategies, (5) Develop an odor complaint response protocol, and (6) Conduct odor impact analyses for new sources to prevent future odor related issues. Geographic Information System (GIS) is used to identify existing complaint areas. A COMP software that incorporates existing United States Environmental Protection Agency (EPA) air dispersion software is developed to determine the target sources, predict the likelihood of new complaints, and conduct odor impact analysis. The odor response protocol requires pre-planning field investigations and conducting surveys to optimize the local agency available resources while protecting the citizen's welfare, as required by the Clean Air Act. ^

Latin America and the Caribbean in 2011 and Beyond: A conversation among Latin America and Caribbean Specialists.

For the first time in more than fifty years, the domestic and external conflicts in Latin America and the Caribbean (LAC) are not primarily ideological in nature. Democracy continues to thrive and its promise still inspires hope. In contrast, the illegal production, consumption, and trading of drugs – and its links to criminal gangs and organizations – represent major challenges to the region, undermining several States’ already weak capacity to govern. While LAC macroeconomic stability has remained resilient, illegal economies fill the region, often offering what some States have not historically been able to provide – elements of human security, opportunities for social mobility, and basic survival. Areas controlled by drug trafficking organizations (DTOs) are now found in Central America, Mexico, and the favelas of Rio de Janeiro and São Paulo, reflecting their competition for land routes and production areas. Cartels such as La Familia, Los Zetas, and Primeiro Comando da Capital (PCC-Brazil), among others, operate like trade and financial enterprises that manage millions of dollars and resources, demonstrating significant business skills in adapting to changing circumstances. They are also merciless in their application of violence to preserve their lucrative enterprises. The El Salvador-Guatemala-Honduras triangle in Central America is now the most violent region in the world, surpassing regions in Africa that have been torn by civil strife for years. In Brazil’s favelas and Guatemala’s Petén region, the military is leaving the barracks again; not to rule, however, but to supplement and even replace the law enforcement capacity of weak and discredited police forces. This will challenge the military to apply lessons learned during the course of their experience in government, or from the civil wars that plagued the region for nearly 50 years during the Cold War. Will they be able to conduct themselves according to the professional ethics that have been inculcated over the past 20 years without incurring violations of human rights? Belief in their potential to do good is high according to many polls as the Armed Forces still enjoy a favorable perception in most societies, despite frequent involvement in corruption. Calling them to fight DTOs, however, may bring them too close to the illegal activities they are being asked to resist, or even rekindle the view that only a “strong hand” can resolve national troubles. The challenge of governance is occurring as contrasts within the region are becoming sharper. There is an increasing gap between nations positioned to surpass their “developing nation” status and those that are practically imploding as the judicial, political and enforcement institutions fall further into the quagmire of illicit activities. Several South American nations are advancing their political and economic development. Brazil in particular has realized macro-economic stability, made impressive gains in poverty reduction, and is on track to potentially become a significant oil producer. It is also an increasingly influential power, much closer to the heralded “emerging power” category that it aspired to for most of the 20th century. In contrast, several Central American States have become so structurally deficient, and have garnered such limited legitimacy, that their countries have devolved into patches of State controlled and non-State-controlled territory, becoming increasingly vulnerable to DTO entrenchment. In the Caribbean, the drug and human trafficking business also thrives. Small and larger countries are experiencing the growing impact of illicit economies and accompanying crime and violence. Among these, Guyana and Suriname face greater uncertainty, as they juggle both their internal affairs and their relations with Brazil and Venezuela. Cuba also faces new challenges as it continues focusing on internal rather than external affairs and attempts to ensure a stable leadership succession while simultaneously trying to reform its economy. Loosening the regime’s tight grip on the economy while continuing to curtail citizen’s civil rights will test the leadership’s ability to manage change and prevent a potential socio-economic crisis from turning into an existential threat. Cuba’s past ideological zest is now in the hands of Venezuela’s President Hugo Chavez, who continues his attempts to bring the region together under Venezuelan leadership ideologically based on a “Bolivarian” anti-U.S. banner, without much success. The environment and natural disasters will merit more attention in the coming years. Natural events will produce increasing scales of destruction as the States in the region fail to maintain and expand existing infrastructure to withstand such calamities and respond to their effects. Prospects for earthquakes, tsunamis, and hurricanes are high, particularly in the Caribbean. In addition, there are growing rates of deforestation in nearly every country, along with a potential increase in cross-sector competition for resources. The losers might be small farmers, due to their inability to produce quantities commensurate to larger conglomerates. Regulations that could mitigate these types of situations are lacking or openly violated with near impunity. Indigenous and other vulnerable populations, including African descendants, in several Andean countries, are particularly affected by the increasing extraction of natural resources taking place amongst their terrain. This has led to protests against extraction activities that negatively affect their livelihoods, and in the process, these historically underprivileged groups have transitioned from agenda-based organization to one that is bringing its claims and grievances to the national political agenda, becoming more politically engaged. Symptomatic of these social issues is the region’s chronically poor quality of education that has consistently failed to reduce inequality and prepare new generations for jobs in the competitive global economy, particularly the more vulnerable populations. Simultaneously, the educational deficit is also exacerbated by the erosion of access to information and freedom of the press. The international panorama is also in flux. New security entities are challenging the old establishment. The Union of South American Nations, The South American Defense Council, the socialist Bolivarian Alliance, and other entities seem to be defying the Organization of American States and its own defense mechanisms, and excluding the U.S. And the U.S.’s attention to areas in conflict, namely Iraq, Afghanistan, and Pakistan – rather than to the more stable Latin America and Caribbean – has left ample room for other actors to elbow in. China is now the top trading partner for Brazil. Russian and Iran are also finding new partnerships in the region, yet their links appear more politically inclined than those of China. Finally, the aforementioned increasing commercial ties by LAC States with China have accelerated a return to the preponderance of commodities as sources of income for their economies. The increased extraction of raw material for export will produce greater concern over the environmental impact that is created by the exploitation of natural resources. These expanded trade opportunities may prove counterproductive economically for countries in the region, particularly for Brazil and Chile, two countries whose economic policies have long sought diversification from dependence on commodities to the development of service and technology based industries.

Pollution generation in the Carajas region of Brazil: An extended input -output approach

The economic development of any region involves some consequences to the environment. The choice of a socially optimal development plan must consider a measure of the strategy's environmental impact. This dissertation tackles this problem by examining environmental impacts of new production activities. The study uses the experience of the Carajás region in the north of Brazil. This region, which prior to the 1960's was an isolated outpost of the Amazon area, was integrated to the rest of the country with a non-sophisticated but strategic road system and eventually became the second largest iron ore mining area in the world. Finally, in the 1980's, the area was linked, by way of a railroad, to the nearest seaport along the Atlantic Ocean. The consequence of such changes was a burst of economic growth along the railroad Corridor and neighboring areas. In this work, a Social Accounting Matrix (SAM) is used to construct a 2-region (Corridor and surrounding area), fixed price, Computable General Equilibrium (CGE) Model to examine the relationship between production and pollution by measuring the different pollution effects of alternative growth strategies. SAMs are a very useful tool to examine the environmental impacts of development by linking production activities to measurable indices of natural resource degradation. The simulation results suggest that the strategies leading to faster economic growth in the short run are also those that lead to faster rates of environmental degradation. The simulations also show that the strategies that leads to faster rates of short run growth do so at the price of a rate of environmental depletion that is unsustainable from a long run perspective. These results, therefore, support the concern expressed by environmental economists and policy makers regarding the possible trade-offs between economic growth and environmental preservation. This stresses the need for a careful analysis of the environmental impacts of alternative growth strategies. ^

Fractal analysis of flocs formed in edible oil -water emulsions by image analysis techniques

Edible oil is an important contaminant in water and wastewater. Oil droplets smaller than 40 μm may remain in effluent as an emulsion and combine with other contaminants in water. Coagulation/flocculation processes are used to remove oil droplets from water and wastewater. By adding a polymer at proper dose, small oil droplets can be flocculated and separated from water. The purpose of this study was to characterize and analyze the morphology of flocs and floc formation in edible oil-water emulsions by using microscopic image analysis techniques. The fractal dimension, concentration of polymer, effect of pH and temperature are investigated and analyzed to develop a fractal model of the flocs. Three types of edible oil (corn, olive, and sunflower oil) at concentrations of 600 ppm (by volume) were used to determine the optimum polymer dosage and effect of pH and temperature. To find the optimum polymer dose, polymer was added to the oil-water emulsions at concentration of 0.5, 1.0, 1.5, 2.0, 3.0 and 3.5 ppm (by volume). The clearest supernatants obtained from flocculation of corn, olive, and sunflower oil were achieved at polymer dosage of 3.0 ppm producing turbidities of 4.52, 12.90, and 13.10 NTU, respectively. This concentration of polymer was subsequently used to study the effect of pH and temperature on flocculation. The effect of pH was studied at pH 5, 7, 9, and 11 at 30°C. Microscopic image analysis was used to investigate the morphology of flocs in terms of fractal dimension, radius of oil droplets trapped in floc, floc size, and histograms of oil droplet distribution. Fractal dimension indicates the density of oil droplets captured in flocs. By comparison of fractal dimensions, pH was found to be one of the most important factors controlling droplet flocculation. Neutral pH or pH 7 showed the highest degree of flocculation, while acidic (pH 5) and basic pH (pH 9 and pH 11) showed low efficiency of flocculation. The fractal dimensions achieved from flocculation of corn, olive, and sunflower oil at pH 7 and temperature 30°C were 1.2763, 1.3592, and 1.4413, respectively. The effect of temperature was explored at temperatures 20°, 30°, and 40°C and pH 7. The results of flocculation of oil at pH 7 and different temperatures revealed that temperature significantly affected flocculation. The fractal dimension of flocs formed in corn, olive and sunflower oil emulsion at pH 7 and temperature 20°, 30°, and 40°C were 1.82, 1.28, 1.29, 1.62, 1.36, 1.42, 1.36, 1.44, and 1.28, respectively. After comparison of fractal dimension, radius of oil droplets captured, and floc length in each oil type, the optimal flocculation temperature was determined to be 30°C. ^

Reliability analysis of encapsulation methods for lead -based paint through an accelerated life testing

The adverse health effects of long-term exposure to lead are well established, with major uptake into the human body occurring mainly through oral ingestion by young children. Lead-based paint was frequently used in homes built before 1978, particularly in inner-city areas. Minority populations experience the effects of lead poisoning disproportionately. ^ Lead-based paint abatement is costly. In the United States, residents of about 400,000 homes, occupied by 900,000 young children, lack the means to correct lead-based paint hazards. The magnitude of this problem demands research on affordable methods of hazard control. One method is encapsulation, defined as any covering or coating that acts as a permanent barrier between the lead-based paint surface and the environment. ^ Two encapsulants were tested for reliability and effective life span through an accelerated lifetime experiment that applied stresses exceeding those encountered under normal use conditions. The resulting time-to-failure data were used to extrapolate the failure time under conditions of normal use. Statistical analysis and models of the test data allow forecasting of long-term reliability relative to the 20-year encapsulation requirement. Typical housing material specimens simulating walls and doors coated with lead-based paint were overstressed before encapsulation. A second, un-aged set was also tested. Specimens were monitored after the stress test with a surface chemical testing pad to identify the presence of lead breaking through the encapsulant. ^ Graphical analysis proposed by Shapiro and Meeker and the general log-linear model developed by Cox were used to obtain results. Findings for the 80% reliability time to failure varied, with close to 21 years of life under normal use conditions for encapsulant A. The application of product A on the aged gypsum and aged wood substrates yielded slightly lower times. Encapsulant B had an 80% reliable life of 19.78 years. ^ This study reveals that encapsulation technologies can offer safe and effective control of lead-based paint hazards and may be less expensive than other options. The U.S. Department of Health and Human Services and the CDC are committed to eliminating childhood lead poisoning by 2010. This ambitious target is feasible, provided there is an efficient application of innovative technology, a goal to which this study aims to contribute. ^

Analysis of fractured terrain using remote sensing and geographic information systems : establishing a correlation between fracture network properties and vegetation

This research analyzed the spatial relationship between a mega-scale fracture network and the occurrence of vegetation in an arid region. High-resolution aerial photographs of Arches National Park, Utah were used for digital image processing. Four sets of large-scale joints were digitized from the rectified color photograph in order to characterize the geospatial properties of the fracture network with the aid of a Geographic Information System. An unsupervised landcover classification was carried out to identify the spatial distribution of vegetation on the fractured outcrop. Results of this study confirm that the WNW-ESE alignment of vegetation is dominantly controlled by the spatial distribution of the systematic joint set, which in turn parallels the regional fold axis. This research provides insight into the spatial heterogeneity inherent to fracture networks, as well as the effects of jointing on the distribution of surface vegetation in desert environments.

Percepções ambientais de comunidades rurais e indicadores de sustentabilidade como subsídios à conservação de áreas de caatinga no Rio Grande do Norte

Environmental degradation is a global problem that particularly affects areas subject to seasonal climatic variations, such as the brazilian semiarid region, namely the Caatinga Domain. Combined with other negative factors, such as natural resource misuse and disorderly land occupation, the consequences of Environmental Degradation have challenged science in the quest for addressing the resulting social and environmental problems. Accordingly, Environmental Perception methodology, by analyzing the concepts, attitudes and values, (especially those pertaining to environmental conservation) represent an important tool in studies that address the relationship between the environment and human actions. Sustainability Indicators are also relevant tools to assess the possible causes and consequences of environmental problems. Among several Sustainability Indicators available, the PressuresState-Impact-Response (PSIR) method is an analytical tool that permits the grouping of factors affecting sustainability as well as their consequences for nature and human health, and thus indicate mitigating actions for society and the public authorities. From this perspective, three areas of Caatinga were studied in Rio Grande do Norte state: Seridó Ecological Station (ESEC), Municipality of Serra Negra do Norte; Private Natural Reserve Stoessel de Brito (PNRSB), Municipality of Jucurutu; and part of the Serra de Santana, Municipality of Tenente Laurentino Cruz. The areas are both legally protected and unprotected and subject to diferent management protocols, though their share the common characteristic of human misuse of natural resources. In this scenario, this thesis´ main goal was to introduce the rural communities into the conservation process, using the results of Environmental Perception of such communities, combined with the analysis of the sustainability of municipalities through PSIR. Information on Environmental Perception was obtained from primary and secondary data from previous studies carried out in the ESEC Seridó and PRNP Stoessel de Brito. Additional data was obtained through direct observation and interview forms applied to rural communities in the Municipality of Tenente Laurentino Cruz. The results showed that respondents possessed a broad knowledge regarding environmental degradation, its causes and consequences for the caatinga biome. PEIR analysis showed that environmental degradation was smaller in countries with protected areas, as compared to those without. The population´s knowledge about environmental degradation and their acceptance of conservation units, as showed by Environmental Perception Analysis, coupled with the results of PEIR, suggest that those attitudes may foster actions aimed at reduction of environmental degradation in the Caatinga domain

Metodologia para implantação de um sistema de disposição de rejeitos em minério de ferro na região do semiárido: estudo de caso

Tailings dams are structures that aims to retain the solid waste and water from mining processes. Its analysis and planning begins with searching of location for deployment, step on which to bind all kinds of variables that directly or indirectly influence the work, such as geological, hydrological, tectonic, topographic, geotechnical, environmental, social characteristics, evaluation security risks, among others. Thus, this paper aims to present a study on the most appropriate and secure type of busbar to design a layout structure of iron ore tailings, taking into account all the above mentioned variables. The case study involves the assessment of sites for location of dams of tailings disposal beneficiation of iron mine to be built in Bonito, in the municipality of Jucurutu in Seridó Potiguar. For site selection among alternatives, various aspects of the current state of the art were considered, one that causes the least environmental impact, low cost investment, adding value to the product and especially the safety of the implanted structure mitigates the concern about induced earthquakes as a result of liquefaction wastes somatized by dams in the region, as the tilling of Mina Bonito is located practically in the hydraulic basin dam Armando Ribeiro in environmental protection (APA). The methodology compares induced by dams in the semiarid region with the characteristics of the waste disposal and sterile seismicity, taking into account the enhancement of liquefaction by the action of seismicity in the Mina Bonito region. With the fulcrum in the methodology, we indicated the best busbar type for disposal of tailings from iron ore or combination of them, to be designed and built in semiarid particularly for Mina Bonito. Also presents a number of possible uses for the tailings and in engineering activities, which may cause processing to the common good.

Análise da problemática socioambiental de nascentes urbanas no município de Garanhuns-PE

Garanhuns City, in Pernambuco, undergoes a rapid, polluting and non-organized urban development affecting its freshwater springs around the urban environment. These sources are of great importance to the district as well as to the hydrographic basin of the Mundaú River. In this view, this paper aims at analyzing the socio-environmental problems resulting from the urban expansion surrounding the Garanhuns’ sources. The study considers the social and environmental dynamics and follows the theoretical contributions of socio-environmental geography proposed by Mendonça’s Urban Environmental System methodological and theoretical model (2004), as well as the conceptual values of Santos’ space theory (2002a). The data treatment included bibliographical and documental research, evaluation of environmental impact, and water analysis. It revealed that Garanhuns possesses many local environmental traits favoring the coming out of freshwater springs and that these sources have played an important role in the making and development of that village. The environmental impacts on freshwater springs, like Olho D’água, Bom Pastor, Vila Maria, Pau Amarelo and Pau Pombo have been evaluated through the environmental impact score IIAN. It put alight serious cases of socio-environmental impacts on the dynamics of the freshwater springs. In the period of April 2013 and April 2014, it monitored the superficial water quality expelled by the Pau Pombo, Pau Amarelo e Vila Maria water sources, and the analyses of the contents followed the determinations of the Environmental National Board, whose parameters are dissolved oxygen, biochemical demand of oxygen, nitrate, total coliforms, faecal coliforms, and electrical conductivity. The results recollected suggest the existence of organic pollution and deep alteration in the water coming out from the sources. In consequence, it seems important the putting out of measures destined to stop those impacts and guaranteeing protection and maintenance of the freshwater springs and their micro-basins.

Uso da cinza do bagaço da cana-de-açúcar como matéria-prima na substituição dos fundentes para aplicações em porcelanato

The present study aims to evaluate the potential use of bagasse ash from sugar cane (CBC) as a flux, replacing phyllite and/or feldspar in standard industrial mass production of enameled porcelain, verifying the possibility of the CBC contribute to the overall reduction of the coefficient of thermal expansion of the ceramic mass. To this end, as a result of the research, we characterized the raw material components of the standard mass (clay, phyllite, kaolin, feldspar, quartz and talc) and the residue of BCC, by testing by XRF, XRD, AG, DTA and ATG. Specimens (CDP) were manufactured in the dimensions of 100 mm x 50 mm x 8 mm in uniaxial matrix under compaction pressure of 33 MPa, assembled in batches of 3 units subsequently sintered at temperatures of 1150°C to 1210°C by varying the Rating Scale at 10°C, heating and cooling ramp of 50°C/min and 25°C/min, with levels of 1 min, 3 min, 5 min, 8 min, 10 min, 15 min, 30 min and 60 min. analyzing the results of the physical properties of water absorption (WA), linear firing shrinkage (LFS), dilatometric analysis (DTA), flexural strain (SFT) and SEM of the sintered bodies in order to verify the adequacy of CDP to ISO 13006, ISO 10545, NBR 13816 standards; NBR 13817 and NBR 13818. The study showed that the formulations that best suit the requirements of the standards are:. G4 - which was applied in 10% of replacing the CBC phyllite, sintering temperature 1210 ° C for 10 min and porch, and F3 - with application of 7.5% of CBC to replace the feldspar in the sintering temperatures of 1190°C, 1200°C and 1210°C for 10 min and porch. These formulations showed better performance regarding the formation of primary and secondary mullite, with considerable reduction of cracks and pores, meeting the prerequisites of standards for glazed porcelain. The results shows that the use of the CBC as a flux in the preparation of porcelain mass meets standard parameters for the manufacture of the product, and thereby can reduce environmental impact and the cost of production. Therefore, it is recommended to use this residue in the ceramics industry, due to its industrial, commercial and collaborative viability for sustainability.