Propuesta de mejora del proceso de aprovisionamiento de materiales consumibles y suministros en una empresa de servicios petroleros

El presente proyecto de investigación desarrolla la mejora en el proceso de aprovisionamiento y distribución de materiales consumibles y repuestos desde su situación operativa actual hasta un modelo optimizado, estructurado y sostenible. Esto se aplica al proceso del área de compras y abastecimiento de la empresa Schlumberger Del Perú S.A.; sin embargo, las metodologías aplicadas pueden ser aplicadas en cualquier sector. El objetivo general es la reducción de costos, disminución en los tiempos de entregas deseables por la operación y un óptimo manejo de recursos, desarrollando mediciones adecuadas para asegurar su mejora continua La propuesta de este trabajo de investigación contempla la implementación de un modelo VMI (manejo de inventario por parte del proveedor) para los materiales consumibles y repuestos no críticos. El objetivo general del proyecto es obtener una reducción de costos y gastos en el área de aprovisionamiento y gestión de inventarios para los materiales consumibles y repuestos en la empresa Schlumberger del Perú S.A. mediante la implementación de un sistema colaborativo VMI. Los objetivos específicos del presente proyecto están orientados a reducir los días de cobertura inventario, disminuir la operatividad transaccional relacionada al aprovisionamiento de MRO, el incremento materiales negociados vía catálogo, así como reducir el tiempo de aprovisionamiento de materiales.

Proyecto Brasil 4D Interactividad en televisión pública

Este artículo presenta la experiencia inédita de ofrecer contenidos audiovisuales para televisión pública digital interactiva brasileña, posibilitando el “diálogo” entre audiencias y empresas por medio del control remoto y del sistema broadcasting. La experiencia de televisión digital interactiva es realizada por la Empresa Brasil de Comunicación (ebc) que, a través de la multiprogramación, creó un canal de servicios para atender a la población de bajos ingresos, asistida por el Programa Bolsa Familia. En 2013, la primera experiencia del proyecto Brasil 4D fue realizada con cien familias en João Pessoa, capital de la provincia de Paraíba, durante tres meses y, desde 2014, el proyecto está siendo desarrollado en Brasilia, Distrito Federal, con trescientas familias. El proyecto, que ofrece gratuitamente nuevos contenidos audiovisuales interactivos, mezcla innovación tecnológica, utilización de multiplataformas y multiprogramación, es desarrollado en software libre.

Modelo para formação dinâmica de rede de fornecedores em empresas estendidas

Supply chains have become an important focus for competitive advantage. The performance of a company increasingly depends on its ability to maintain effective and efficient relationships with its suppliers and customers. The extended enterprise (i.e. composed of several partners) needs to be dynamically formed in order to be agile and adaptable. According to the Digital Manufacturing paradigm, companies have to be able to quickly share and disseminate information regarding planning, designing and manufacturing of products. Additionally, they must be responsive to all technical and business determinants, as well as be assessed and certified for guaranteed performance. The current research intends to present a solution for the dynamic composition of the extended enterprise, formed to take advantage of market opportunities quickly and efficiently. A construction model was developed. This construction model consists of: information model, protocol model and process model. The information model has been defined based on the concepts of Supply Chain Operations Reference model (SCOR®). In this model is defined information for negotiating the participation of candidate companies in the dynamic establishment of a network for responding to a given demand for developing and manufacturing products, in seven steps as follows: request for information; request for qualification; alignment of strategy; request for proposal; request for quotation; compatibility of process; and compatibility of system. The protocol model has been elaborated and inspired in the OSI, this model provides a framework for linking customers and suppliers, indicates a sequence to be followed, in order to selecte companies to become suppliers. The process model has been implemented by means of process modeling according to the BPMN standard and, in turn, implemented as a web-based application that runs the process through its several steps, which uses forms to gather data. An application example in the context of the oil and gas industry is used for demonstrating the solution concept.

Abundância e distribuição sazonal de espécies autóctones de camarões peneídeos no canal de abastecimento do sistema primar de aquicultura orgânica (Laguna de Guaraíras, Tibau do Sul, Rio Grande do Norte, Brasil)

Guaraíras lagoon, located in Tibau do Sul in the eastern littoral of Rio Grande do Norte (Brazil), presents a permanent connection to the sea, which guarantees the occurrence of a rich biodiversity, which includes the autochthonous shrimp species Litopenaeus schmitti, Farfantepenaeus subtilis and Farfantepenaeus brasiliensis. In spite of being subject to a strong human intervention in the last decade, mainly related to the installation of shrimp (Litopenaeus vannamei) farms, the lagoon is still scarcely studied. The present study aims at characterizing the populations of the three autochthonous penaeid shrimp species inhabiting Guaraíras, taking into consideration their abundance and seasonal distribution in the inflow channel of Primar System of Organic Aquaculture (Tibau do Sul, Rio Grande do Norte, Brazil). Twelve monthly samples were carried out from May 2005 to April 2006 with the aid of a circular cast net in the inflow channel, which is daily supplied with water from Guaraíras. Sampling months were grouped in trimesters according to the total pluviosity, thus comprising four trimesters. Water salinity was monitored twice a week and temperature values registered on a daily basis at noon, during the study period. The daily pluviosity data from the municipality of Tibau do Sul were supplied by Empresa de Pesquisa Agropecuária do Rio Grande do Norte (EMPARN). Collected shrimp were identified, weighted, measured and sexed. L. schmitti specimens (0.2 g to 17.8 g) were distributed in 1.3 g weight classes intervals. From the eighth sampling month (December 2005) onwards, males were classified into three categories, in accordance with the development of their petasm: (a) rudimentary petasm, (b) partially formed petasm, and (c) completely formed petasm. Among the ecological variables, rainfall showed the greatest dispersion (s.d.=187.74Rainfall and abundance of L. schmitti were negatively correlated (r = -0.85) whereas its abundance and water salinity were positively correlated (r = 0.63). Among 1,144 collected individuals, 1,127 were L. schmitti, 13 were F. subtilis and 4 were F. brasiliensis, which corresponded to 98.51%, 1.14% and 0.35% of the total of collected individuals. L. schmitti occurred in 100 % of all samples. Differently, the presence of F. subtilis and F. brasiliensis was restricted to 33% and 17% of the collected samples, respectively. The present study confirmed the occurrence of L. schmitti, F. brasiliensis and F. subtilis in Guaraíras. However, this lagoon seems to be primarily inhabited by juvenile Litopenaeus schmitti. The population of L. schmitti analysed showed a seasonal pattern of distribution. In general, in the months of high salinity and absence of rain, the number of individuals was higher than in the wet months. Further studies on the reproductive biology and ecology of L. schmitti, F. brasiliensis and F. subtilis may elucidate questions referring to the abundance, period, and phase of occurrence of these shrimp genera in Guaraíras. Finally, the risks associated to the establishment of L. vannamei in the lagoon provide a novel outlet for studies in this biotope

Mapeando fundamentos do Constructo Neuromarketing com profissionais de empresa de publicidade

This study aims to acknowledge the domain level and influence of the neuromarketing construct. This is done considering professionals at advertising agencies in Brazil. The presence of concepts related to this new approach is very little divulged, and there are little analysis performed on this area. Thus, the research is of qualitative and exploratory nature and used as primary fonts books, articles related to marketing, neuroscience, and psychology as well as secondary fonts. A profound interview was realized aiming the main advertising agencies in Brazil. The public was composed by managers responsible for planning. A content analysis was performed afterwards. The advances related to the brain science have permitted the development of technological innovation. These go primarily towards knowledge and unconscious experiences of consumers, which are responsible for the impulse of decision making and consumer behavior. These issues are related to Neuromarketing, that in turn, uses techniques such as FMRI, PET and FDOT. These scan the consumer s brain and produces imagines on the neuron s structures and functioning. This is seen while activities such as mental tasks for the visualization of brands, images or products, watching videos and commercials are performed. It is observed that the agencies are constantly in search of new technologies and are aware of the limitations of the current research instruments. On the other hand, they are not totally familiar with concepts related to neuromarketing. In relation to the neuroimage techniques it is pointed out by the research that there is full unawareness, but some agencies seem to visualize positive impacts with the use of these techniques for the evaluation of films and in ways that permit to know the consumer better. It is also seen that neuroimage is perceived as a technique amongst others, but its application is not real, there are some barriers in the market and in the agencies itself. These barriers as well as some questioning allied to the scarce knowledge of neuromarketing, make it not possible to be put into practice in the advertising market. It is also observed that even though there is greater use of neuromarketing; there would not be any meaningful changes in functioning and structuring of these agencies. The use of the neuro-image machines should be done in research institutes and centers of big companies. Results show that the level of domain of the neuromarketing construct in the Brazilian advertising agencies is only a theoretical one. Little is known of this subject and the neurological studies and absolutely nothing of neuroimage techniques

Influência da vermiculita expandida na resistência à compressão e reologia de pastas cimentantes de poços de petróleo

Several problems related to the loss of hydraulic seal in oilwells, causing gas migration and/or contamination of the production zone by water, have been reported. The loss of the hydraulic seal is a consequence of cracks which can be occasioned either by the invasion of gas during the wait on cement or by the expansion of the casing causing the fracture of the cement sheath. In case of the pressure of the formation is higher than the pressure in the annulus, gas can migrate into the slurry and form microannulus, which are channels where gas migrates after the cement is set. Cracks can be also occasioned by the fracture of the cement sheath when it does not withstand the thermal and dynamic loads. In reservoirs where the oil is heavy, steam water injection operation is required in order to get the oil flowing. This operation increases the temperature of the casing, and then it expands and causes the fracture of the cement sheath in the annulus. When the failures on the cement are detected, remedial cementing is required, which raise costs caused by the interventions. Once the use of cement in the construction civil sector is older than its use in the petroleum sector, it is common to bring technologies and solutions from the civil construction and apply them on the petroleum area. In this context, vermiculite, a mineral-clay widely encountered in Brazil, has been used, on its exfoliated form, in the civil construction, especially on the manufacture of lights and fireproof concretes with excellent thermal and acoustical properties. It has already been reported in scientific journals, studies of the addition of exfoliated vermiculite in Portland cements revealing good properties related to oilwell cementing operations. Thus, this study aimed to study the rheological behavior, thickening time, stability and compressive strength of the slurries made of Portland cement and exfoliated vermiculite in 5 different compositions, at room temperature and heated. The results showed that the compressive strength decreased with the addition of exfoliated vermiculite, however the values are still allowed for oiwell cementing operations. The thickening time of the slurry with no exfoliated vermiculite was 120 min and the thickening time of the slurry with 12 % of exfoliated vermiculite was 98 min. The stability and the rheological behavior of the slurries revealed that the exfoliated vermiculite absorbed water and therefore increased the viscosity of the slurries, even though increasing the factor cement-water. The stability experiment carried out at 133 ºF showed that, there was neither sedimentation nor reduction of the volume of the cement for the slurry with 12 % of exfoliated vermiculite. Thus, the addition of exfoliated vermiculite accelerates the set time of the cement and gives it a small shrinkage during the wait on cement, which are important to prevent gas migration

Impactos da adoção do padrão contábil IFRS no Brasil : houve redução na percepção do risco de seleção adversa pelos credores não bancários das empresas de capital aberto brasileiras?

Dissertação (mestrado)—UnB/UFPB/UFRN, Programa MultiInstitucional e Inter-Regional de Pós-Graduação em Ciências Contábeis, 2016.

Adição de vermiculita expandida mícron em pastas de baixa densidade para cimentação de poços de petróleo

The northeastern region of Brazil has a large number of wells producing oil using a method of secondary recovery steam injection, since the oil produced in this region is essentially viscous. This recovery method puts the cement / coating on thermal cycling, due to the difference in coefficient of thermal expansion between cement and metal coating causes the appearance of cracks at this interface, allowing the passage of the annular fluid, which is associated with serious risk socioeconomic and environmental. In view of these cracks, a correction operation is required, resulting in more costs and temporary halt of production of the well. Alternatively, the oil industry has developed technology for adding new materials in cement pastes, oil well, providing high ductility and low density in order to withstand the thermo-mechanical loads generated by the injection of water vapor. In this context, vermiculite, a clay mineral found in abundance in Brazil has been applied in its expanded form in the construction industry for the manufacture of lightweight concrete with excellent insulation and noise due to its high melting point and the presence of air in their layers lamellar. Therefore, the vermiculite is used for the purpose of providing low-density cement paste and withstand high temperatures caused by steam injection. Thus, the present study compared the default folder containing cement and water with the folders with 6%, 8% and 10% vermiculite micron conducting tests of free water, rheology and compressive strength where it obtained the concentration of 8 % with the best results. Subsequently, the selected concentration, was compared with the results recommended by the API standard tests of filtered and stability. And finally, analyzed the results from tests of specific gravity and time of thickening. Before the study we were able to make a folder with a low density that can be used in cementing oil well in order to withstand the thermo-mechanical loads generated by steam injection

Estudos de Durabilidade Frente ao Ataque Ácido de Compósitos Portland-Polímero para Cimentação de Poços de Petróleo

Portland-polymers composites are promising candidates to be used as cementing material in Northeastern oil wells of Brazil containing heavy oils submitted to steam injection. In this way, it is necessary to evaluate its degradation in the commonly acidizind agents. In addition, to identify how aggressive are the different hostile environments it is an important contribution on the decision of the acidic systems to be used in. It was investigated the performance of the Portland-polymer composites using powdered polyurethane, aqueous polyurethane, rubber tire residues and a biopolymer, those were reinforced with polished carbon steel SAE 1045 to make the electrochemical measurements. HCl 15,0 %, HCl 6,0 % + HF 1,5 % (soft mud acid), HCl 12,0 % + HF 3,0 % (regular mud acid) and HAc 10 % + HF 1,5 % were used as degrading environment and electrolytes. The more aggressive acid solution to the plain Portland hardened cement paste was the regular mud acid, that showed loss of weight around 23.0 %, followed by the soft mud acid, the showed 11.0 %, 15.0 % HCl with 7,0 % and, at last the 10.0 % HAc plus HF 1.5 % with just 1.0 %. The powdered polyurethane-composite and the aqueous polyurethane one showed larger durability, with reduction around 87.0 % on the loss of weight in regular mud acid. The acid attack is superficial and it occurs as an action layer, where the degraded layer is responsible for the decrease on the kinetic of the degrading process. This behavior can be seen mainly on the Portland- aqueous polyurethane composite, because the degraded layer is impregnated with chemically modified polymer. The fact of the acid attack does not have influence on the compressive strength or fratography of the samples, in a general way, confirms that theory. The mechanism of the efficiency of the Portland-polymers composites subjected to acid attack is due to decreased porosity and permeability related with the plain Portland paste, minor quantity of Ca+2, element preferentially leached to the acidic solution, wave effect and to substitute part of the degrading bulk for the polymeric one. The electrolyte HAc 10 % + HF 1,5 % was the least aggressive one to the external corrosion of the casing, showing open circuit potentials around +250 mV compared to -130 mV to the simulated pore solution to the first 24 hours immersion. This behavior has been performed for two months at least. Similar corrosion rates were showed between both of the electrolytes, around 0.01 μA.cm-2. Total impedance values, insipient arcs and big polarization resistance capacitive arcs on the Nyquist plots, indicating passivity process, confirm its efficiency. In this way, Portlandpolymers composites are possible solutions to be succeed applied to oilwell cementing concomitant submitted to steam injection and acidizing operation and the HAc 10,0 % + HF 1,5 % is the less aggressive solution to the external corrosion of the casing

Reporte financiero Burkenroad / Latinoamérica – Colombia / Almacenes Éxito S.A.

En la fecha de estudio, Colombia presentó grandes alternativas de inversión gracias al comportamiento positivo de sus indicadores económicos; sin embargo, el mercado accionario se ha visto afectado por el comportamiento a la baja de los precios del petróleo, lo que ha hecho que varios inversionistas castiguen en alto grado el mercado enfocado a dicho sector; no obstante, después de realizar el análisis de la valoración de la acción del Grupo Éxito se observa que está subvalorada, por lo cual se prevé un incremento en el precio muy positivo, lo que generará un crecimiento el dividendo proyectado; lo anterior se debe, sobre todo, a la estrategia de crecimiento de la compañía en Latinoamérica, la cual se continúa consolidando después de la adquisición en Brasil y Argentina en el año 2015 -- Aunque el panorama económico para los países en los que tiene operación no es muy positivo, se espera que el resultado de la incursión de la organización en dichos países sea positivo, a partir de las estrategias como lo son: implementar el beneficio cruzado entre los países, crear sinergias y continuar con el posicionamiento de la marca propia, siendo los pilares fundamentales para lograr de manera exitosa los resultados esperados por la compañía

Influência da adição de cálcio nas propriedades de pastas geopoliméricas destinadas a cimentação de poços de petróleo

Nowadays, the search for new technologies that are able to follow the upcoming challenges in oil industry is a constant. Always trying properties improvements of the used materials, looking for the best performance and greater life time. Besides the search for technologies that show an improvement of performance, the search for materials environmentally correct along the whole production process. In Oil well cementing, this search for new technologies passes through the development of slurry systems that support these requests and that are also environmentally friendly. In this context, the use of geopolymer slurries is a great alternative route to cementing oil wells. Besides having good properties, comparable to Portland cement slurries, this alternative material releases much less CO2 gas in the production of their root materials when compared the production of Portland cement, which releases tons of CO2. In order to improve the properties of geopolymer slurries has been added Calcium Oxide, as observed in other studies that slurries where the Calcium is present the values of compressive strength is greater. The addition has been realized based in the CaO/SiO2 molar ratio of 0.05, 0.10 and 0.15. Have been performed compressive strength tests, thickening time, rheology and fliud loss control test of the slurries, following NBR 9831, as well as the physical chemical characterization of XRD, SEM and TG. Has been observed in most of the tests the slurries follow a tendency until the ratio of 0.10, which inverses in the ratio 0.15. This behavior can be explained by two phenomena that occur simultaneously, the first one is the break of the polymer chains and a consequent increase in molucules mobility, which prevails until the ratio of 0.1, and the second is possible approach of the chains due to the capacity of the calcium ions stabilize the charges of two different aluminum. There is only one linearity in the mechanical behavior that can be attributed to the appereance of the C-S-H phase. Based on this, it is concluded that the phenomenon of breaking the polymer chains predominates until the ratio of 0.1, causing an increase of the filtrate volume, lower rheological parameters and increasing thickening time. From the ratio of 0.15 the approach of the chains predominates, and the behavior is reversed

Crecimiento del Schizolobium parahyba var. amazonicum cultivado en presencia de Ananas comosus var. erectifolius en Pará, Brasil.

El incremento en la perturbación ambiental y la presión mundial para preservar la selva amazónica han fomentado el cultivo de especies nativas. Con el objetivo de evaluar el crecimiento de Schizolobium parahyba var. amazonicum (Huber ex Ducke) barneby cultivado en presencia de componentes agrícolas como Ananas comosus var. erectifolius, se desarrolló un estudio en la Estación Experimental de la empresa Tramontina Belem S.A., ubicada en la Ciudad de Aurora do Pará (PA), Brasil. El diseño experimental fue factorial de bloques completos al azar con parcelas subdivididas en el tiempo, para que los arreglos formaron los tratamientos de la parcela y las subparcelas fueron el tiempo de observación, con seis tratamientos y cuatro repeticiones: 1) S. parahyba var. amazonicum, Cordia goeldiana y Switenia macrophylla:GLC; 2) S. parahyba var. amazonicum, C. goeldiana, S. macrophylla y A. comosus var. erectifolius: GLCc; 3) S. parahyba var. amazonicum y C. goeldiana: GL; 4) S. parahyba var. amazonicum, C. goeldiana y A.comosus var. erectifolius; GLCc; 5) S. parahyba var. amazonicum: G; y 6) S.parahyba var. amazonicum y A. comosus var. Erectifolius: Gc. La distancia entre las especies forestales fue 4 x 3 m y para las plantas de A. comosus 0.80 m x 0.50 m. El tamaño de la parcela fue 18 x 24 m con cuatro repeticiones por tratamiento, el total de parcelas fue 24 y de área experimental 10 368 m2. Las variables analizadas para inferir el crecimiento del componente forestal fueron altura (H) y diámetro a la altura del pecho (DAP), cada 6 meses durante 3 años. En los seis sistemas de cultivo la tasa semestral de crecimiento de la altura y DAP de S. parahyba var. amazonicum fue mayor en los dos primeros años, y siguió con una tendencia de crecimiento lento y continuo durante los 36 meses de estudio. El efecto positivo de la presencia de A. comosus var. erectifolius se observó en el crecimiento de las plantas de S. parahyba var.amazonicum.

Propuesta de un plan estratégico para la empresa dedicada a la generación de energía eléctrica por medio de biomasa. Caso ilustrativo.

El sector energético es de gran importancia para el desarrollo de la sociedad, siendo pilar del desarrollo industrial en los países, la electricidad juega un papel muy importante en la vida del ser humano. El crecimiento del desarrollo económico depende en gran medida de una demanda creciente de energía, puesto que las fuentes de energía fósil con las que en nuestro país se genera energía eléctrica, se agotan, es inevitable que en un determinado momento la demanda no pueda ser abastecida, para evitar dicha situación es necesario que se desarrollen nuevos métodos para obtener energía, uno de esos métodos es la generación de energía a través de biomasa. El empleo de las fuentes de energía actuales tales como el petróleo, acarrea consigo problemas como la progresiva contaminación para el medio ambiente, y el alto costo de producción debido a la fluctuación en el mercado de los precios de este combustibles. En El Salvador, en lo referente a la generación de electricidad a partir de biomasa actualmente se ha avanzado, incrementando su aporte al mercado energético debido al interés en producir energía limpia, reduciendo así la dependencia de combustibles fósiles y contribuyendo a crear un medio ambiente más limpio; con la tecnología y la organización adecuada, el costo de concebir energía con biomasa es competitivo en comparación con las fuentes convencionales. Sin embargo, todavía no existe una promoción adecuado que informe a la población de los beneficios que este tipo de generación de energía proporciona, además la tecnología utilizada requiere gran inversión y no existen en el país políticas de bosques energéticos que contribuyan a la generación de energía, por ello se consideró que sería un aporte importante para la empresa EGI HOLDCO EL SALVADOR, S.A. DE C.V., la propuesta de un plan estratégico aprovechando las oportunidades y fortalezas con las que cuenta para lograr sus metas a corto y largo plazo e identificar debilidades y amenazas para poder anticiparse a ellas. La presente investigación se diseñó con el fin de elaborar un plan estratégico para la empresa EGI HOLDCO, empresa generadora de energía eléctrica por medio de biomasa, con el objetivo de permitirle mejorar su eficiencia y competitividad, contar con una orientación adecuada de sus acciones, que le permitan incrementar el aporte de energía a la red nacional pero sin contaminar el medio ambiente. Se elaboraron instrumentos de investigación como el cuestionario y la entrevista para conocer a fondo la situación actual de la empresa por medio de las opiniones de los Gerentes y de los habitantes de la zona donde está ubicada la empresa. En base a la información obtenida se diseñó la propuesta que ofreciera una solución viable a cada problemática que fue encontrada, tal como se detalla a continuación: Por el alto costo de los equipos que solo se encuentran en el extranjero EGI HOLDCO se ha visto en la necesidad de recurrir a financiamiento para la compra de estos, o la necesidad de promocionar a la sociedad este tipo de generación de energía para darse a conocer, la empresa no cuenta con una herramienta administrativa que le ayude a orientar sus acciones y recursos de manera que pueda solventar estas situaciones y volverse más competitiva en el mercado.

Uso de argilominerais e diatomita como adsorvente de fenóis em águas produzidas na indústria de petróleo

The oil production in Brazil has been increasing each year. Consequently, increasing volumes of water produced are generated with large quantities of contaminants, which brings many problems in disposing of these waters. The concern that the concentrations of contaminants in water produced meet existing laws for disposal of effluents, has been extremely important for the development of different techniques for treatment of water produced. The study of clay minerals as adsorbents of organic contaminants has grown considerably so in order to combine the low cost with the efficiency of environmental preservation and health issues. Thus, this study aims to understand the characteristics of vermiculite clay, sodium bentonite, calcium bentonite and diatomite and evaluate their performance as adsorbents for phenol in the water produced. Through adsorption isotherms it was possible to observe the behavior of these adsorptive clay and diatomite for adsorption of phenol, the main phenolic compound found in water produced. Different concentrations of synthetic solutions of phenol were put in touch with these adsorbents under same conditions of agitation and temperature. The adsorbents were composted adsorptive favorable, but the vermiculite and diatomite showed little capacity for absorption, being suggested for absorbs small concentrations of phenol in the balance isothermal

Simulador de dano à formação, aplicado ao Projeto e à execução da perfuração de poços de petróleo

With the high oil price variability, the petroleum and the reservoir engineers are usually face to face on how they can evaluate the well performance and productivity. They can improve high productivity from the well construction to the secondary recoveries, but they have never tried a measurement in the drilling operations about the lower productivity index. As a rule, frequently the drilling operations hear from the reservoir engineering and geology that, if there is a formation damage, probably some drilling operations practices were not done properly or the good practice in petroleum engineering or mud engineering were not observed. The study in this working search is an attempt of how to measure a formation damage just from the project drilling to the drilling operations, with datum from the fields in Brazilian northeast and putting into practice a Simulator developed from the modeling on the theory offered by different experts and sources in formation damage